hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating :victory:
Download 1.85 or 3.04 I think 1.83 incompatible with sgs2 and see in task manager is Kies on if yes then kill it...
Regards,
Paulius
Related
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating
yooogh said:
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating
Click to expand...
Click to collapse
Download the latest Odin from here
Make sure you've installed the right firmware with the right kernil for your device. Re-install the firmware after making sure it is the right one. Search the forum's threads to check some how-to guides of how to flash ROMs and/or Kernels.
Let me know what happens with you!
Don't duplicate threads...
Happy new year
Paulius
hello guys
i was try repartition my samsung galaxy s3 i9300
i set odin on PIT and then still running more than 5 hours and show this status
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and program still running .... is Odin partitioning my EMMC but slow or stopped???
should i interrupt process or not???
thx
speedman2202 said:
hello guys
i was try repartition my samsung galaxy s3 i9300
i set odin on PIT and then still running more than 5 hours and show this status
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and program still running .... is Odin partitioning my EMMC but slow or stopped???
should i interrupt process or not???
thx
Click to expand...
Click to collapse
same as my situation ,but i'm on note 2. it should be that long. if yours are not rooted and it just happened like this then probably it may be a ic or motherboard issue.
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Post lacks information .
Magic Ball does not work sorry .
jje
Which firmware were you on, which did you try flashing?
bhaveshkhatri92 said:
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Click to expand...
Click to collapse
Unfortunately I think its a problem with internal memory not been able to write on.I think its an SDS, same case of a friend we took it to a repair shop (No warranty ) but they said that only changing the motherboard can fix the problem.
I hope its not your case.If it is and your phone is still on warranty take it to them they will fix it for free.
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Are you entering download from a completely powered off state?
Sent from my SM-N900P using Tapatalk 2
penywyse said:
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Click to expand...
Click to collapse
Upgrading odin from 3.07 to 3.09 won't make any difference. You are doing something else wrong. Since you did not list which box you used i.e. should be the PDA box, please click on "rom flashing basics in my signature " all the info you need is there including the links you need. Enjoy !!!
To ensure your doing all the steps right go on YouTube and search for Sprint Galaxy Note 3 Odin and follow the video step by step.
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
alph19 said:
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
Click to expand...
Click to collapse
Did you download correct firmware for your phone?
What model you have?
What android version?
Network locked or unlocked?
Which firmware did you try?
Answer these and I can help