Hi Guys,
I was trying to install the new MIUI OS on the GT-N7000 and followed the below instruction:
How To Install MIUI and Google Apps?(only if phones is rooted and has non cm10 kernel)
Download MIUI V5: goo.im/devs/ibotpeaches/miuiandroid/releases/3.7.12/miuiandroid_GT-N7000_jb-3.7.12.zip
And GAPPS : goo.im/devs/ibotpeaches/miuiandroid/releases/gapps/miuiandroid_gapps-4.1.2-small_signed.zip
And CM10 Kernel:sourceforge.net/projects/anikos/files/AniDroid-JB-N7000/AniDroid-JB-N7000-v0.5_10092012.zip/download
->Put EVERYTHING in external SDcard
2. Switch Off the phone and Go To Recovery Mode.( to go to recovery press and hold the Volume Up
+Home (center) keys simultaneously and then hold the Power key. Keep the three buttons pressed till the screen turns up, the Samsung logo blinks for two times.)
3. Flash CM10 Kernel.
4. Reboot back into Recovery(you'll find the option on the same screen or go back to main menu and check)
5, Now Wipe Data, Cache & Dalvik Cache
6. Flash MIUI V5
--> To flash miui v5 :- First of all, backup your current ROM so that you can restore it in case you do not like the new ROM. Scroll down to “backup and restore” option and select “backup”. It might take a few minutes for the backup to complete.
9. When it is done select go back option and choose “wipe data/factory reset” option and wipe it.
10. Then go to ”wipe cache partition” and wipe it.
11. Finally go to “advanced” option and “wipe dalvik cache”.
12. Return back to the main menu and select “install zip from sd card> choose zip from sd card” and select the ROM file that you copied to your phone.
Finally, go back to the main menu in Recovery and select ” reboot system now”.
7. Reboot the phone and then go back to recovery mode and then..
8... Flash GAPPS
9. Reboot and you are ready to go.
NOTE::: The first boot after installing a new ROM takes much longer time (up to 3-7 minutes) than an usual boot. In case your phone does not boot properly and you are stuck on bootanimation remove the back cover, pull out the battery, wait for a minute and reinsert the battery. Boot phone into Recovery again and “wipe data/factory reset” . Reboot device and things should go fine.
So 1st the phone was stuck on cyanogenmod screen, Because it was stuck I rebooted twice & then Wipe Data, Cache & Dalvik Cache and Flashed the ROM and Gapps post which the phone now does not go into recovery mode at all when i try (up volume + Home + Power) When i do so its stuck on the screen which says Samsung Galaxy Note GT-N7000. Dont know the way ahead PLz help guys.
Hope someone can fix this.
Regards,
Alex
Related
I installed the stock firmware via odin but now my sgs2 is in boot-logo-loop please help me!
If the flash went all good which im guessing it did as you are trying to turn you phone on do this.
1. Turn your phone off
2. Hold Volume up + Home + Power on
3. This will bring up a menu with some options on it, select wipe data/factory reset then select wipe cache partition
4. Then on this Menu pick Reboot System
should work if it doesnt after this try reflashing your ROM.
I had no camera after first installing the Aura mod, so I'm posting this to give the steps I used to get my camera working.
First I used the Automatic BootLoader to UnLock my Atrix & install CWM. I did update CWM using romracer's custom CWM (I had to place the .img file in the same folder as the Auto BootLoader files, btw), but I'm not sure that was entirely necessary.
That done, I used CWM to create a backup of my current ROM (which was the stock version). Backup completed, I proceeded to these steps to install the Aura ROM (v1.1.2):
1. Held the VOL Down button while pressing Power until 'Fastboot' appeared
2. Pressed the VOL Down button several times (7, to be exact) until 'Android Recovery' appeared
3. Pressed the VOL Up button to select 'Android Recovery', ie: CWM
4. Wiped Data/Factory Reset (Power button is used to select in CWM, btw)
5. Wiped Cache
6. Wiped Dalvik Cache (in "advanced" menu)
7. Selected "install zip from sdcard" and installed:
7a. Aura 1.1.2
7b. Contacts
7c. Camera
8. Rebooted into CWM by selecting "reboot system now" and holding down the VOL Down button until 'Fastboot' appeared
8a. NOTE: Do NOT reboot normally at this point !! <== Learnt this the hard way
9. Installed Faux123's Kernel (v0.1.6) from here
10. Rebooted normally
Hopefully this helps someone. This n00b had some difficulty following some of the fairly simple instructions in Diviance's Aura thread. I only switched away from Nokia yesterday after 13 years of Symbian.
Apologies if this post is in the wrong place. I tried to add it to the actual Aura MOD thread, but didn't have permission (not enough posts).
I pushed some numbers on the phone and "poof" the phone went into a menu called "CWM based Recovery v5.0.2.8" which includes:
reboot system now
apply update from sdcard
wipe data and wipe cache
advanced
and finally: power off
None of the menu items will actually reboot are start the phone in operable mode; it always goes back the the same menu.
I Have tried the Power + T and Power Volume and nothing helps.
Any help is appreciated
Thanks
First of all thanks for the help in advance and sorry for my english.
What happend is that I installed the ROM Ace-i-Sure 8.0.0.zip (119 MB) following this steps:
Turn off your device and boot it into CWM Recovery Mode.
In the Recovery Mode,:
Open “backup and restore” and backup your current ROM
When the backup is done go back to the main menu
In the CWM Recovery Mode, scroll to “wipe data factory reset” option and select “Yes”.
Go to “advanced” option and “wipe dalvik cache”.
Go to “mounts and storage” and wipe “system”.
Then come back to the main menu and select “install zip from sdcard> choose zip from sdcard”. Now browse to the ROM file and select it. Confirm your choice by selecting “yes”.
This will start the installation process and will take a few minutes to complete.
Return to the main menu again and select “reboot system now”. It might take a few minutes before your device reboots, so a little patience is required.
When the phone boots up, you will be able to enjoy the newly installed Jelly Bean ROM on your Galaxy Ace S5830i.
but the problem is that the phone started to boot, but got stoped in the samsung galaxy ace logo
And now I can´t even enter the recovery mode!
Please please I would really apreciate the help!! I don´t know what to do!
Thanks for taking the time in helping users like me, that are a bit lost!
Amanduska said:
First of all thanks for the help in advance and sorry for my english.
What happend is that I installed the ROM Ace-i-Sure 8.0.0.zip (119 MB) following this steps:
Turn off your device and boot it into CWM Recovery Mode.
In the Recovery Mode,:
Open “backup and restore” and backup your current ROM
When the backup is done go back to the main menu
In the CWM Recovery Mode, scroll to “wipe data factory reset” option and select “Yes”.
Go to “advanced” option and “wipe dalvik cache”.
Go to “mounts and storage” and wipe “system”.
Then come back to the main menu and select “install zip from sdcard> choose zip from sdcard”. Now browse to the ROM file and select it. Confirm your choice by selecting “yes”.
This will start the installation process and will take a few minutes to complete.
Return to the main menu again and select “reboot system now”. It might take a few minutes before your device reboots, so a little patience is required.
When the phone boots up, you will be able to enjoy the newly installed Jelly Bean ROM on your Galaxy Ace S5830i.
but the problem is that the phone started to boot, but got stoped in the samsung galaxy ace logo
And now I can´t even enter the recovery mode!
Please please I would really apreciate the help!! I don´t know what to do!
Thanks for taking the time in helping users like me, that are a bit lost!
Click to expand...
Click to collapse
Boot into download mode, and flash stock rom with odin.
Hi, I was checking and there's not much information on how to flash R720, so I decided to help with the way I do, and I have done many of them.
I will not take reponsability for a bad use or any problem caused on your phone, so please read carefully and go ahead.
BEFORE YOU DO ANYTHING MAKE A BACKUP BEFORE FLASHING !!!!
First download this package that contain everything you will use : d-h.st/zFgk
1- Turn your phone off and install with odin the file named: admire-cwm_2.tar
2- with the phone off, now press these 3 at the same time, power button, volume down and the back key and when shows the samsung logo, release the buttons and inmediately press volume up and home button and it will enter in to Recovery Mode, now install the file named: CM72RC1-Kernel.zip wipe data and wipe cache and power the phone off again.
3 - Enter to Recovery Mode again, and flash file named: Samsung-Admire-rc3.zip, wipe data and cache, reboot the phone and will be done.