hello there guys ...
im confused and in trouble, my problem:
i got a sgs2, had a jb firmware from sammobiles.com, i tried to root my phone,
flash a kernel and look i softbricked my phone and that like 3 times ...
and now, i downloaded again a jb firmware from sammobiles and my phone works now.
i dont know how to root, flash kernel and rom, can someone help me out here ?
i read the threads about root and flash instructions, but still, im dumb -.-
Make it simple, I assume you already know what model you've got so just flash a custom kernel meant fir your device. Get the tar version and flash it via Odin.
Sent from the little guy
StressSyndrom said:
i got a sgs2, had a jb firmware from sammobiles.com, i tried to root my phone,
flash a kernel and look i softbricked my phone and that like 3 times ...
Click to expand...
Click to collapse
If you can elaborate on what steps you followed, and what files you used, we could help u find out what went wrong.
"To err is human, to forgive is divine."
Sent from my SGS II
seriously!!!!
here you go http://forum.xda-developers.com/showthread.php?t=2156592
immortalneo said:
If you can elaborate on what steps you followed, and what files you used, we could help u find out what went wrong.
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
root is done, got the dorimanx v8.34 kernel, but ill dont get, whats like wipe and these steps on RR rom http://forum.xda-developers.com/showthread.php?t=1436854
StressSyndrom said:
root is done, got the dorimanx v8.34 kernel, but ill dont get, whats like wipe and these steps on RR rom http://forum.xda-developers.com/showthread.php?t=1436854
Click to expand...
Click to collapse
1. Download Odin
2. Download Firmware
3. Flash with Odin
4. Download Custom Kernel Then Flash With Odin Again To Get Root And Custom Recovery
5. Get Triangle Away From Play Store To Remove Yellow Triangle
6. If Flashing A Custom Rom ( Recommended To Factory Reset Or Full wipe In Recovery)
StressSyndrom said:
but ill dont get, whats like wipe and these steps on RR rom http://forum.xda-developers.com/showthread.php?t=1436854
Click to expand...
Click to collapse
The instructions are quite simple:
1. Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
All these options are easy to find on CWM. Which part confuses you?
Related
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Jokesy said:
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Robotr0n said:
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Click to expand...
Click to collapse
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Jokesy said:
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Robotr0n said:
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Click to expand...
Click to collapse
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Jokesy said:
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
if the above doesn't work try flashing stock from download mode - ODIN
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Robotr0n said:
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
Click to expand...
Click to collapse
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
serialteg said:
if the above doesn't work try flashing stock from download mode - ODIN
Click to expand...
Click to collapse
Thanks. I´ll try that.
Lushstep said:
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Click to expand...
Click to collapse
Also thanks, I was afraid of this, everytime when I´m flashing via ODIN I have bad feelings.
Jokesy said:
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes MD5 sums match and they are allright, I downloaded all of them today from official repositories. Also thanks for helping
I´m goind off to bed, long day full of flashing and bootlooping Thank you all guys. :good:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Robotr0n said:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Click to expand...
Click to collapse
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Jokesy said:
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Click to expand...
Click to collapse
OK, I´m going to try it now.
Robotr0n said:
OK, I´m going to try it now.
Click to expand...
Click to collapse
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Jokesy said:
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Click to expand...
Click to collapse
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
*boy*racer* said:
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Click to expand...
Click to collapse
I don´t know how to get these logcats.
Jokesy said:
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
Click to expand...
Click to collapse
You really think that all these files which I downloaded are damages ? Uhm I don´t know but I don´t think so.
I tried this with Siyah kernel once and nothing happend. But I´ll give it a try again.
EDIT:
OH, God. I tried different stock ROM and even the new stock ROM wont boot... after i restart mobile, I´m in factory mode :-/
How to do a logcat
Ok so this is what i do.
. Download attachment and extract anywhere
.Open up Platform-tools folder and hold Shift+right click on an empty space within the folder.
.Click on "Open command window here"
.In the command window, type "adb logcat"
.Plug in device & turn it on
.It should do a logcat
leave it for about 1 min then disconnect device. Right click the logcat and select mark then highlight all and right click again. go to pastebin.com or something like that then paste it and save and give us the link.
hope this helps
I installed 4.1.2 on my s2 gt i9100 no brand but will not start, crashes on startup with the samsung logo. Why?
I now have the phone down, I think I have to replace the 4.0.3
this is the tread http://forum.xda-developers.com/showthread.php?t=1544487
Did you use CWM recovery wipe? Maybe it's emmc brick bug?
It can't be a brick as it is turning on
And it's flashable with Odin, not CWM.
Sent from the Matrix
mar10o said:
Did you use CWM recovery wipe? Maybe it's emmc brick bug?
Click to expand...
Click to collapse
CWM doesn't have the emmc bug, Its a bug in the stock 4.0.4 recovery.
Conte94 said:
I installed 4.1.2 on my s2 gt i9100 no brand but will not start, crashes on startup with the samsung logo. Why?
I now have the phone down, I think I have to replace the 4.0.3
this is the tread http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
This is most likely because you have just flashed 4.1.2 without wiping old rom data. Its advised on just about every single rom thread to wipe before flash. If you dont want to lose apps/appdata then use Titanium Backup Pro.
TheATHEiST said:
CWM doesn't have the emmc bug, Its a bug in the stock 4.0.4 recovery.
This is most likely because you have just flashed 4.1.2 without wiping old rom data. Its advised on just about every single rom thread to wipe before flash. If you dont want to lose apps/appdata then use Titanium Backup Pro.
Click to expand...
Click to collapse
you have made a backup of the app + system data with titanium. also save photos, music and video
I did not think to flash a firmware I had to clean everything, I thought it was enough to download the file, put the phone in download mode with odin and startare
now how do I proceed? I wipe the 3 as I did for the rom?
Conte94 said:
you have made a backup of the app + system data with titanium. also save photos, music and video
I did not think to flash a firmware I had to clean everything, I thought it was enough to download the file, put the phone in download mode with odin and startare
now how do I proceed? I wipe the 3 as I did for the rom?
Click to expand...
Click to collapse
1) Put ur phone into dwnld mode and flash a stock ICS 4.0.3 firmware using ODIN to make ur phone up and running.
2) after that root ur phone by flashing the tar file of Siyah kernel v5.0.1 vide ODIN.
3) then reboot to siyah kernel recovery and wipe Data/factory reset and the wipe cache partition.
4)Dwnld the stock JB firmware from that link u provided and flash the same using ODIN
that way u will have a clean install of stock JB on ur phone
but if by dalal recovery without installing the 4.0.3 and do the wipe, and then install the 4.1.2 is not good?
Conte94 said:
but if by dalal recovery without installing the 4.0.3 and do the wipe, and then install the 4.1.2 is not good?
Click to expand...
Click to collapse
u can give it a try that way and post ur Success/Failure feed back over here
IMO the best bet is what i stated in my earlier post
Sun90 said:
u can give it a try that way and post ur Success/Failure feed back over here
IMO the best bet is what i stated in my earlier post
Click to expand...
Click to collapse
He has no need to do what you said and install rom twice. All he needs to do is flash kernel like Siyah v6 beta4, reboot into download mode, wipe data and then flash his stock rom via download. No need to install 4.0.3 first its just waste of time.
and where can I download the file of Siyah kernel v5.0.1?you say the kernel?
I installed the 4.1.2 doing the wipe, and everything went ok.
so every time I install a new firmware should I do the wipe right?
and then I do not have siyah kernel but everything went well from recovery
Conte94 said:
I installed the 4.1.2 doing the wipe, and everything went ok.
so every time I install a new firmware should I do the wipe right?
and then I do not have siyah kernel but everything went well from recovery
Click to expand...
Click to collapse
Good:good:
Yes, its always better to do the wipes first for a clean install, as u can see in ur case itself
Enjoy the rom for now and no need to worry about siyah kernel for now
ok
however, once I had siyah then I removed
thank you very much for your help, I did not know I had to do so for the firmware
thank you very much
my galaxy s2 (GT-I9100) doesn´t boot, I put on and when "Samsung Galaxy SII GT-I9100" letters appear it doesn´t do anything. I try flashing 3 ROMs but they don´t boot
please help :crying:
Which ROM are u on now?
"To err is human, to forgive is divine"
Sent from my SGS II
SOLVED
now I have the official android 4.1.2 :
PDA: I9100XXLSD
PHONE:I9100XXLS8
CSC:I9100FOPLS4
I try flashing again 3 times more and the problems disappear I don´t know the problem but now boot perfect
PD: All the ROMs were official
PD: this thread is solved
Solved? Good for u...:thumbup:
I was gonna suggest a factory reset..
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
sorry but how i can edit the title
jvpag said:
sorry but how i can edit the title
Click to expand...
Click to collapse
Just click on 'Edit Post' for ur first post and click 'Go advanced'.
And please share how u managed to solve it.
"To err is human, to forgive is divine"
Sent from my SGS II
my solution
to solve it, first I think "the problem is the kernel", well I download the siyah kernel and flash it. later I put on the device but doesn´t boot. I find on internet the stock kernel and flash it. It doesn´t boot...... . finaly I download the stock firmaware (2.3.4) and the new JB 4.1.2 and I flash the first but doesn´t work and later the 4.1.2. this time the phone start normally and it, does a "boot-loop" (only one) and now it works perfectly.
PD: sorry for my english
It is a... Bootloop.
To fix the problem:
1- Flash Siyah Kernel or any other Custom Kernel like SpeedMod or PhilZ
2- Reboot into recovery mode
3- Do a Wipe Cache
4- In advanced, Do a Wipe Dalvik Cache
5- Reboot
sadekmefti said:
It is a... Bootloop.
To fix the problem:
1- Flash Siyah Kernel or any other Custom Kernel like SpeedMod or PhilZ
2- Reboot into recovery mode
3- Do a Wipe Cache
4- In advanced, Do a Wipe Dalvik Cache
5- Reboot
Click to expand...
Click to collapse
Yup as he said it's a bootloop , but you don't need to flash again (since he already installed a custom rom) a new kernel the bootloop can be fixed by wiping data then wiping cache and wiping dalvik cache after installing your rom.
Recommending Siyah is just to make sure you are on a stable kernel, but most custom kernels associated with custom roms are good enough.
Sent from my GT-I9100 using xda app-developers app
Good day all,
I have a problem with samsung based roms. When i flash them, the phonegets stuck at the samsung logo. I tried a few JB 4.1.2 rom from samfirmware.com. And today i tried to flash omega rom v23. With all of them i get the bootloop. I've already tried the newest siyah and philz kernels, but it didn't help.
This is what i do when flashing a new rom: wipe data, wipe cache partition, wipe dalvik. Then flash the rom.
I have no problem flashing aokp roms. Because i have flashed omega rom v12 aokp milestone and it starts normally.
Can anyone help me?
ps. when i do data wipe, i get "E : format_volume : make_extf4fs failed on /dev/block/mmcblkl1p2
DOes this have anything to do with the bootloops?
Anyone got this problem with Samsung based roms?
Sent from my GT-I9100
Try this download these 2 wipe scripts Rom Wipe / Nuke script Then for good measure this too Kernel Wipe and save files to sd card.
Then go into download mode flash both files, then any Rom you wish immediately after, hope this helps.
Do a full wipe, install the rom, reboot into Recovery, install fixed Philz-kernel (or Siyah), and reboot. In my case it worked, but I agree it's pretty difficult sometimes.
The first boot takes very long by the way.
strictly.mobile said:
Try this download these 2 wipe scripts Rom Wipe / Nuke script Then for good measure this too Kernel Wipe and save files to sd card.
Then go into download mode flash both files, then any Rom you wish immediately after, hope this helps.
Click to expand...
Click to collapse
I've flashed all 3 files. Still loops
strictly.mobile said:
Try this download these 2 wipe scripts Rom Wipe / Nuke script Then for good measure this too Kernel Wipe and save files to sd card.
Then go into download mode flash both files, then any Rom you wish immediately after, hope this helps.
Click to expand...
Click to collapse
Donnie Sins said:
Do a full wipe, install the rom, reboot into Recovery, install fixed Philz-kernel (or Siyah), and reboot. In my case it worked, but I agree it's pretty difficult sometimes.
The first boot takes very long by the way.
Click to expand...
Click to collapse
I've tried this with the latest philz and siyah kernels. And after that wiped caches,. But it still bootloops
Follow this procedure..
Wipe cache partition
Wipe dalvik cache
Factory reset
Format system, preload,data
Install zip
Reboot..
"VIVEK NEEL"
irvan90 said:
I've tried this with the latest philz and siyah kernels. And after that wiped caches,. But it still bootloops
Click to expand...
Click to collapse
Have u checked if the roms are not broken or corrupted?
"To err is human, to forgive is divine"
Sent from my SGS II
corruptionfreeindia said:
Follow this procedure..
Wipe cache partition
Wipe dalvik cache
Factory reset
Format system, preload,data
Install zip
Reboot..
"VIVEK NEEL"
Click to expand...
Click to collapse
i'll try this now..
will get back if it works or not
immortalneo said:
Have u checked if the roms are not broken or corrupted?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
The files are all good. I've even tried the stock official JB 4.1.2 fom samfirmware. But it also bootloops. I have to add that i had the firmware from three uk 4.0.4. But all the samsung based roms that ive flashed after that (Jellybean) got bootloops.
corruptionfreeindia said:
Follow this procedure..
Wipe cache partition
Wipe dalvik cache
Factory reset
Format system, preload,data
Install zip
Reboot..
"VIVEK NEEL"
Click to expand...
Click to collapse
This doesn't work. When i click on mount /preload, it says 'error mounting/ preload'
irvan90 said:
The files are all good. I've even tried the stock official JB 4.1.2 fom samfirmware. But it also bootloops. I have to add that i had the firmware from three uk 4.0.4. But all the samsung based roms that ive flashed after that (Jellybean) got bootloops.
Click to expand...
Click to collapse
Mind boggling issue mate! Let's see if anyone else has got better solutions.
"To err is human, to forgive is divine"
Sent from my SGS II
irvan90 said:
This doesn't work. When i click on mount /preload, it says 'error mounting/ preload'
Click to expand...
Click to collapse
You should have followed this path..
Mounts and storage/format system
Mounts and storage/format data
"VIVEK NEEL"
corruptionfreeindia said:
You should have followed this path..
Mounts and storage/format system
Mounts and storage/format data
"VIVEK NEEL"
Click to expand...
Click to collapse
sorry , i read wrong...
but this also didn't help.
would it help if i partitioned the internal sd card? or is there another way?
irvan90 said:
sorry , i read wrong...
but this also didn't help.
would it help if i partitioned the internal sd card? or is there another way?
Click to expand...
Click to collapse
Flash neat ROM lite 4.6.1 ..
Follow the procedure what I said..
"VIVEK NEEL"
corruptionfreeindia said:
Flash neat ROM lite 4.6.1 ..
Follow the procedure what I said..
"VIVEK NEEL"
Click to expand...
Click to collapse
ok will try this now...but just to be clear..in the instructions you posted. what must i do with preload? because when i press format /preload...i get Error formatting /preload
irvan90 said:
ok will try this now...but just to be clear..in the instructions you posted. what must i do with preload? because when i press format /preload...i get Error formatting /preload
Click to expand...
Click to collapse
Skip it
"VIVEK NEEL"
corruptionfreeindia said:
Skip it
"VIVEK NEEL"
Click to expand...
Click to collapse
This also doesn't work. It gets stuck at the android screen
Sent from my GT-I9100
I have similar problem, no error popups though...
after full wipe (even using cleaning scripts) and installing new rom (with recommended kernel) my phone bootloops on splash screen...
I only found out that stock roms work, and most of custom fails - I managed to launch ReVolt once, failed any other time even with the same method. Furthermore ReVolt caused my simlock to come back (and this is actually a different story - tried every method to unlock my phone but only with Galaxy_S unlock and only on Gingerbread worked)
Could it be casued by any "deeper" ingerence of the provider i got my phone from? It's Orange, Poland
Thanks for any tips
I can install stock ics 4.0.4 without a problem. But when I try to flash stock jelly bean via Odin, it gets stuck at the Samsung screen. And I've waited nearly an hour and still stuck at Samsung screen
Sent from my GT-I9100
Hi,
I am running stock 4.0.3 ICS XWLP7 on my I9100, rooted with CF-Root 5.4 and wanted to update to 4.1.2 by using Chameleon ROM 3.0.2...
So I went to recovery, did factory reset, wipe cache, wipe dalvik cache and installed the zip file, but after rebooting I am stuck at the bootlogo (with the yellow triangle). After ~10 min. I pulled the battery and rebooted. I was able to get into the new recovery so I tried to flash it again but got the same error.
I am now back at 4.0.3 (nandroid restore).
So.. is there something obvious I did wrong?
TIA for your help.
Did you format system first? If is not working try another kernel
Sent from my GT-I9100 using xda premium
Nope, I didn't format /system. Thank you it works now
comp1234 said:
Nope, I didn't format /system. Thank you it works now
Click to expand...
Click to collapse
Please add [SOLVED] to the title of ur post then.
"To err is human, to forgive is divine"
Sent from my SGS II