This is the discussion thread is for CM 10.2.
Feel free to put your questions, reviews, bugs, fixes etc.
Mention you device info (spyder or umts_spyder) and whether using SS or BMM. It shall be helpful for phrasing all information
UPDATE: Safestrap users can flash it on any slot now. The slot-1 limitation has been fixed.
Known Issues(Based on what most users experienced.) :
Random Blackouts/Shutdowns
Wi-fi Issues (Works on Second Boot)
Problem with data connectivity. When migrating from a LTE reception area to 3G reception, the data is lost.
Exchange e-mail not working.
Changelog
XT 912 spyder
XT 910 umts_spyder
CM Download Links
XT912 spyderXT910 umts_spyder
GApps
Official gapps-jb-20130813Gapps Core 4.3(Minimal)
Gapps Full (194 MB)
Older Unofficial builds
CM 10.2 Builds
dtrail1's build for XT910 (umts_syder) only
Notes
Make a backup of your current ROM. In case you need to fallback.
[*]Flash these builds only on slot-1 (for Safestrap)
A full wipe should be done before flashing esp. when coming from a 4.2 build.
There's no RC or M or stable build for CM10.2 as of yet. Flash nightlies, remebering you might/will have issues listed above (and some others)
Video Tutorial
Video Tutorial on Android 4.3 CM10.2 by: hrishi21007
Any preinstall notes?
What are the bugs and what all works?
What's the difference between Dhacker's build and Dtrail1's build for the XT910 (umts_spyder)?
Hmm so far everything i use is working for me. Others have had problems with exchange but I don't use that. But 4.2.2 had intermittent sound problems that I am waiting to see if it reoccurs in 4.3. Also Does anyone else have this problem? After a full charge with the phone still connected to the charged...does the phone become very sluggish? Even after unplugging from the charger it will still be a little sluggish but will eventually pick itself up and work smoothly again.
I put a discussion form in the development part also but ether one.
Sent from my XT912 using Tapatalk 4
Running dhackers 11-8 built on XT910 (UMTS Spyder) here.... All seems to be working, but getting random shutdowns (not rebooting) - twice today so far.
A really good start for 4.3 imho!
hrishi21007 said:
Any preinstall notes?
What are the bugs and what all works?
Click to expand...
Click to collapse
Installation is just like CM 10.1. A few bugs are confirmed. Basic functions are almost all working.
The right link for Dtrail's rom is http://downloads.crackflasher.com/?dir=Devices/Motorola/Droid Razr/CyanogenMod 10.2
I tried the Dhacker's rom, just had some randoms shutdown, and focal not work properly.
TWRP 2.11 (?)
Slot-1
1GB
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT: Dtrail's rom has the reboot bug too?
Keyboard
The keyboard is not working on my phone.
thomtlhom said:
The keyboard is not working on my phone.
Click to expand...
Click to collapse
SwiftKey working fine here.
thomtlhom said:
The keyboard is not working on my phone.
Click to expand...
Click to collapse
Have you tried any replacement keyboard??
btw please mention your device and recovery info.
Sent from my XT912 using Tapatalk 2
DigitalJosee said:
The right link for Dtrail's rom is http://downloads.crackflasher.com/?dir=Devices/Motorola/Droid Razr/CyanogenMod 10.2
I tried the Dhacker's rom, just had some randoms shutdown, and focal not work properly.
TWRP 2.11 (?)
Slot-1
1GB
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT: Dtrail's rom has the reboot bug too?
Click to expand...
Click to collapse
The link you posted is a mirror for original builds. dtrail1's build is for XT910 (GSM RAZR) only. Not for Driod Razr.
neo.ank said:
The link you posted is a mirror for original builds. dtrail1's build is for XT910 (GSM RAZR) only. Not for Driod Razr.
Click to expand...
Click to collapse
But dtrail's build has the reboot bug?
DigitalJosee said:
But dtrail's build has the reboot bug?
Click to expand...
Click to collapse
Not Sure. I have an XT912.
Issue: Focal force closing after running once.
Tried clearing data and fc from settings. Doesn't help. Requires Reboot.
XT912 on SS
Keyboard
neo.ank said:
Have you tried any replacement keyboard??
btw please mention your device and recovery info.
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
XT912, Safestrap
I would need an .apk for an alternative keyboard.
August 11th build working great on my XT912. (August 10th build was randomly rebooting & wouldn't come back after the screen turned off.)
Tried PicSphere, but couldn't get it to work.
Everything else I've tried is working great. Very smooth. I'm pleasantly surprised how stable this early build is! Great work!!!!
For all those commenting on focal, remember its still in development. Especially picsphere on a device without a gyroscope.
cm 10.2 so far
neo.ank said:
This is the discussion thread is for CM 10.2.
Feel free to put your questions, reviews, bugs, fixes etc.
Mention you device info (spyder or umts_spyder) and whether using SS or BMM. It shall be helpful for phrasing all information
WARNING:These builds are experimental and have bugs.
Known Issues:
Random Blackouts/Shutdowns
Sdcard not mounting on initial boot
Cannot Install Paid Apps from Play Store
Wi-fi Issues
Panorama
Links
Downloaded the latest unoficial version, installed on system 3 BMM, 800 mb system 800 mb data and 500mb cache, installed 4.3 core gapps, booted just fine, wifi started right away, had no problem downloading and installing Titanium backup pro, swiftkey 3 paid, gps worked and locked (gps test app), titanium backup found my backup files on my sd card right away built in file manager doesnt see sd card but es file explorer does, had it on for a couple of hours and didnt have any major issues.
Device: XT910 BMM
System 1: stock JB
System 2: unofficial carbon rom
System 3: unoficial 10.2-20130811-umts-spyder
Click to expand...
Click to collapse
I am using dtrail1's build is for XT910 (cm-10.2-20130809-UNOFFICIAL-umts_spyder.zip) with pa_gapps-full-4.3-20130808-signed.zip. Regarding know issues:
Random Blackouts/Shutdowns--- not present. no reboot or shutdown
Sdcard not mounting on initial boot--- not present
Cannot Install Paid Apps from Play Store--- not present, I can install any app with out problem.
Wi-fi Issues--- not present, wi-fi work perfect, as bluetooth, as GPS, as DATA.
Panorama--- not present, It works perfect.
It works better than 10.1 in any aspect and is faster.
I am using BMM on slot 2.
Related
Hi,
For a couple of days now, the GPS doesn't work with the CM10.1 nightlies.
I checked my device with an app called "Z-Device test" and it says there is no GPS in my phone.
Nevertheless, the hardware is OK, as it works with the stable builds of CM.
Any ideas?
drAstic99 said:
Hi,
For a couple of days now, the GPS doesn't work with the CM10.1 nightlies.
I checked my device with an app called "Z-Device test" and it says there is no GPS in my phone.
Nevertheless, the hardware is OK, as it works with the stable builds of CM.
Any ideas?
Click to expand...
Click to collapse
I'm having similar problems. Although Z-Device test thinks that I do have GPS. None of the apps ever get a reading and the little icon on the status bar never appears.
I've tried resetting it using GPS status to reset all cached GPS data and also 'Download GPS assistance data' but it has not helped.
Its been fixed... New nightlies are back with gps :|
meilbox said:
Its been fixed... New nightlies are back with gps :|
Click to expand...
Click to collapse
OK, I'm on cm-10.1.2. Is it fixed in a newer one than this?
Jemsquash said:
OK, I'm on cm-10.1.2. Is it fixed in a newer one than this?
Click to expand...
Click to collapse
Let me elaborate, sorry I'm relatively new to cyanogen mod. I've got it set to nightlies and check for updates is turned on to daily. I've also checked manually but there are no updates available.
If I check the build date in about phone it is Fri Jul 12 12:25:13 PDT 2013.
This correlates to:
umts_spyder
Motorola Razr stable Send to ROMManager Direct Download: cm-10.1.2-umts_spyder.zip
md5sum: 222891ba743c8e6bead634d22010129e Short URL: http: //get. cm/get/9cR 158.25 MB 2013-07-12 13:25:13
on the page http: //get. cm/?device=umts_spyder (new to the forum so I can't post urls)
There seem to be more recent updates but I'm not sure how to tell if I've got them..
Hopefully it will start to roll down into the other CM based roms now as well.
It may be that you have to delete your ROM as the dirty upgrade will also contain the old/broken things as well. I had to re-do mine from a fresh corrected rom before things started to work as I expected. My $.02.
It has started working this evening...does CM update quietly? I thought I would see a different update version install if it did update.
Perhaps it has fixed itself somehow. I'm a bit confused about this.
Jemsquash said:
It has started working this evening...does CM update quietly? I thought I would see a different update version install if it did update.
Perhaps it has fixed itself somehow. I'm a bit confused about this.
Click to expand...
Click to collapse
You have to flash the nightlies through recovery in order to update. A full wipe is recommended before flashing.
Sent from my XT912 using Tapatalk 2
Right guys this is the Q&A Thread for the INTERNATIONAL X+ (enrc2b) ask questions and so on report bugs to me, NO OFF TOPIC i will update the 2nd post with bugs and so on.
Ask questions if you are unsure about something
Don't go off topic
I have only made this thread as a convenience, as i know you lot like to talk to us, but i will lock it if it goes super OT
STATE if you are on 10.1 or 10.2
REPORT BUGS IN THE DEVDB AND NOT HERE
First time installing CyanogenMod 10.1/10.2 to your ONE X+, or coming from another ROM:
- Read known issues ans FAQs
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM10.1/10.2 ZIPs to your SDCard
- Boot into HBOOT (hold Volume Down at boot)
- Flash the boot.img
- Fastboot flash boot boot.img
- Reboot into recovery via the bootloader menu
- Flash CM10.1/10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1/10.2:
- Copy CM10.1/10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.1/CM10.2 zip from SDCard
- Reboot
Code:
CM10.1 NIGHTLIES BUGS
HDMI Does NOT work
Sometimes phone siginal can take up to a minute to show after a reboot\boot
Code:
CM10.2 NIGHTLIES BUGS
HDMI Does NOT work
Sometimes phone siginal can take up to a minute to show after a reboot\boot
Focal is buggy when video recording so use the standard camera app to video record
updatet from the last unofficial release to this one. menu/recent-apps button doesnt work, even no vibration.
in the "[ROM][OFFICIAL] HTC OneX+ INTER CM10.2 (4.3) Nightlies" you wrote:
DO NOT go posting in this thread, that's what the Q&A thread in well Q&A is for...
and here you wrote:
REPORT BUGS IN THE DEVDB AND NOT HERE
:silly:
el-Loko said:
updatet from the last unofficial release to this one. menu/recent-apps button doesnt work, even no vibration.
in the "[ROM][OFFICIAL] HTC OneX+ INTER CM10.2 (4.3) Nightlies" you wrote:
DO NOT go posting in this thread, that's what the Q&A thread in well Q&A is for...
and here you wrote:
REPORT BUGS IN THE DEVDB AND NOT HERE
:silly:
Click to expand...
Click to collapse
there's a BUG REPORTER on the DEVDB
use the new theme
Lloir said:
there's a BUG REPORTER on the DEVDB
use the new theme
Click to expand...
Click to collapse
ahhh, okay, done!
Lloir, you said in the old thread (http://forum.xda-developers.com/showpost.php?p=45324654&postcount=1234) that the audio stutter was fixed in 10.2, and if I understood correctly that you are also "porting" it back to the 10.1 branch. When can we expect a new build that has these fixes?
(Also, I'm currious, how does this fixing work? Is it tuning of the parameters in /sys/module/cpu_tegra/parameters/ and /sys/module/snd_soc_tlv320aic3008/parameters/, or more hardcore sourcecode changes? And if it is the parameters, what values did you put in?)
With todays nightly my phone doesnt boot, so I roll back to personal build
Notechis said:
With todays nightly my phone doesnt boot, so I roll back to personal build
Click to expand...
Click to collapse
you are joking....it built nicely less than 6hours ago UGH i'll take a look now
koekiemonster said:
Lloir, you said in the old thread (http://forum.xda-developers.com/showpost.php?p=45324654&postcount=1234) that the audio stutter was fixed in 10.2, and if I understood correctly that you are also "porting" it back to the 10.1 branch. When can we expect a new build that has these fixes?
(Also, I'm currious, how does this fixing work? Is it tuning of the parameters in /sys/module/cpu_tegra/parameters/ and /sys/module/snd_soc_tlv320aic3008/parameters/, or more hardcore sourcecode changes? And if it is the parameters, what values did you put in?)
Click to expand...
Click to collapse
nope literally tuning the ramdisk's cpu freq's that is all i did
Same here. Stuck on HTC logo screen after latest official nightly. Tried completely new flash but still stuck there. Temporarily reverting to old nandroid save.
XiaoBBB said:
Same here. Stuck on HTC logo screen after latest official nightly. Tried completely new flash but still stuck there. Temporarily reverting to old nandroid save.
Click to expand...
Click to collapse
ALL DEVICES are affected today, so no one is getting an official nightly
Lloir said:
ALL DEVICES are affected today, so no one is getting an official nightly
Click to expand...
Click to collapse
darn, i want that audio fix
koekiemonster said:
darn, i want that audio fix
Click to expand...
Click to collapse
it's in the personal build the one you are seeding
My nightly booted but every system process kept closing upon setup and after.
Sent from my HTC One X+ using Tapatalk 4
Aust S5 said:
My nightly booted but every system process kept closing upon setup and after.
Sent from my HTC One X+ using Tapatalk 4
Click to expand...
Click to collapse
LOL wut, it's impossible for TODAYS nightly to boot.
Lloir said:
LOL wut, it's impossible for TODAYS nightly to boot.
Click to expand...
Click to collapse
Thought the nightly was only missing files like vendor and such so when dirty flashing it might still boot?
Sent from my HTC One X+ using xda premium
Lloir said:
it's in the personal build the one you are seeding
Click to expand...
Click to collapse
i think it is working now (in 10.1.3 RC2). I did a (somewhat dirty) fix to get rid of the audio stutter:
echo 760000 > /sys/module/cpu_tegra/parameters/suspend_cap_freq
echo 2000 > /sys/module/cpu_tegra/parameters/suspend_delay
echo 204000 > /sys/module/snd_soc_tlv320aic3008/parameters/audio_min_freq
(I'm using mortplayer for music, with the equalizer in the mortplayer app)
This probably isn't very good for battery life, but playing music is more important
just fixed the torch on 10.2 also cleaning up the rom itself. dialer is back on the home screen again, correct battery stats are setup and some other annoying things, once i have sorted out a few niggles, i'll upload the personal build again. Trying to get as much as i can get sorted before next week. As i won't be around and it will only be tom for a week or two
Version 2013-09-05 dirty flash only data, dalvik and cache.
Sent from my HTC One X+ using Tapatalk 4
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
asawi said:
Yep! I still keep the Tablets in trhe Family on Succulents 1231 CM10 build. Super stable! I see no reason to "upgrade". I like to experiment so I' have tried other builds, but none of them give me anything I want that isn't in this "old" build.
I am filled with admiration for all the developers though. They do such amazing work! :good:
Click to expand...
Click to collapse
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
I haven't had one single unwanted reboot in the year I've had it installed. Go figure! Can't say I've noticed any wifi problems either, but then wifi here is not as reliable as I'd want so maybe I just took for granted it was the wifi in the house acting up when it may have been the Tablet.
Sent from my GT-P5210 using Tapatalk 4
pepi4 said:
I've only found one problem with this build. Sometimes I will be in the middle of working and my tablet will shutdown and reboot. It's not a full reboot though? I've also had WIFI dropping but this can be fixed by taking a WIFI lock in the command program
Click to expand...
Click to collapse
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
digixmax said:
I had one "spontaneous reboot" incident in all the 10 months on Succulent's 10.0 12/31 builds, compared a few incidents a month with 10.1 and 10.2. No WiFi issue whatsoever.
FWIW I am running CM11 M2 snapshot at the moment, it's not bug free but its performance is surprisingly quite snappy.
Click to expand...
Click to collapse
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
pepi4 said:
Dig ... You are giving me GAS Sounds like a fun project since I'm snowed in.
Click to expand...
Click to collapse
Just use recovery to back up your current CM10.0 before flashing CM11, that way you can revert back to CM10.0 if need be without any sweat.
To flash CM11, you'll need to use CWM 6.0.4.5 (or TWRP 2.6.3.1) or later version; see http://forum.xda-developers.com/showpost.php?p=49024436&postcount=105 and http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8 on how to create flashable recovery zip to update recovery in emmc.
Be aware that CM11 sometimes randomly fails to boot (or reboot), see http://forum.xda-developers.com/showpost.php?p=49082178&postcount=131, so don't panic and give up if it fails to boot first time after installation.
I flashe CM11 and it seem to run great. Only problem is ... I can't load a lot of my application from the Play Store. When I try to install I get this error message. "my device isn't compatible". Some will install and others won't?
Went back to 10.0 CM11 has that awful low battery poltergeist thing. Get down to 20n percent battery and the ghost takes over. 10.0 doesnt do this :laugh:
pepi4 said:
My Nook has been around a lot with new OS's. I've always had some problem with CM7 10.1 ... Finally I tried Succulent's 10.0 dated 12/31 and I have a very well behaved Nook. No WiFi problems. No more problems with battery drain. I'm DONE. Thanks to the developers
Click to expand...
Click to collapse
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
digixmax said:
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/.
Click to expand...
Click to collapse
Thanks!
PepeladZ said:
Could you share a link to this nice build? Searched and could not find straight answer to where it is. Thanks in advance.
Click to expand...
Click to collapse
Here ya go my friend ...
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
Have fun
[deleted]
deleted
i would also like to endorse this build for a few reasons:
1. super snappy, UI is smoother than 4.2 JB and kitkat
2. the old tablet UI is in this ROM and it's really easy to enable and configure, which is awesome because the old tablet UI is amazing
3. yeah no wifi problems, battery life is pretty solid too from what i've seen.
on cm10.1.3 official, i was getting FC's of the process "com.android.media" on boot. doesn't happen here, i don't think it happened on kitkat either. if you want a really stable tab, flash this build.
Looks like I am taking the wifes Nook back and checking this out!
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Sent from my Nexus 5 using Tapatalk
mpry1 said:
After having a ton of stability issues and horrible battery life I tried going from CM11 back to this build. Problem is I am getting an error trying to flash it. Do I need to revert back to an earlier CWM to flash CM10?
Click to expand...
Click to collapse
You need to use earlier version of CWM, e.g., 6.0.3.x or 6.0.2.x.
(Alternatively you can replace the update-binary file (in the folder \META-INF\com\google\android\) in the CM10 ROM zip file with its new corresponding version in the CM11 ROM zip file).
good release version?
I'm running this 12/31 build of succulent's and it is indeed quite stable. I noted it is a debug build. I'd assume a release build would be a little quicker & smaller. Is there a release build equivalent to this package? thx!
Nexus Experience Rom
All credit goes to Gummy Team and Dhacker
Nexus Experience Main Page (Also has download links)
http://nexusexperience.weebly.com/
Twitter:
https://twitter.com/GonzalezBrenden
I'm not involved with the rom, I'm just posting it for them. Okayed it with their team.
ins5736 said:
Nexus Experience Rom
All credit goes to Gummy Team and Dhacker
Nexus Experience Main Page (Also has download links)
http://nexusexperience.weebly.com/
Twitter:
https://twitter.com/GonzalezBrenden
I'm not involved with the rom, I'm just posting it for them. Okayed it with their team.
Click to expand...
Click to collapse
Nice! Please correct the title 4.2.2 --> 4.4.2
Just flashed. Will return back with results later tonight Supah excited
ins5736 said:
Nexus Experience Rom
All credit goes to Gummy Team and Dhacker
Nexus Experience Main Page (Also has download links)
http://nexusexperience.weebly.com/
Twitter:
https://twitter.com/GonzalezBrenden
I'm not involved with the rom, I'm just posting it for them. Okayed it with their team.
Click to expand...
Click to collapse
thanks...
any known issue ?
Downloading
abbas-h said:
thanks...
any known issue ?
Click to expand...
Click to collapse
I´m downloading right now, I´ll tell you how it goes. Thanks dhacker!
It's very similar to Gummy at this point. Same functionality and same issues.
OG RAZR XT912 got 4.4 before S4!
Download: http://ilinux.hj.cx/OTA-Updates/
contacts seems not to sync with google account. there is no contact into people.
already set up an account, but no luck
anyone else have this? is there a solution?
thanks!
heblu said:
contacts seems not to sync with google account. there is no contact into people.
already set up an account, but no luck
anyone else have this? is there a solution?
thanks!
Click to expand...
Click to collapse
OTA fix this, but you will need to install it manually (wipe cache and dalvik). Automatic process failed to me...
heblu said:
contacts seems not to sync with google account. there is no contact into people.
already set up an account, but no luck
anyone else have this? is there a solution?
thanks!
Click to expand...
Click to collapse
Flash dhackers latest gapps for 4.4
Gesendet von meinem XT910 mit Tapatalk 4
I have issues with Youtube app, it works but doesn't play videos. I have reported it through bug section at the Nexus Experience web.
Atm testing with default kexec kernel.
dtrail1 said:
Flash dhackers latest gapps for 4.4
Gesendet von meinem XT910 mit Tapatalk 4
Click to expand...
Click to collapse
flashed kk 20131120 dhackers gapps, wiped cache and dalvik, but the problem persists
i'll try OTA
thanks
maybe a new version helps
gapps-kk-20131208-no_set_metadata.zip 10-Dec-2013 10:42 99M
http://androidhosting.org/Devs/Dhacker29/omap4/gapps-kk-20131208-no_set_metadata.zip
heblu said:
flashed kk 20131120 dhackers gapps, wiped cache and dalvik, but the problem persists
i'll try OTA
thanks
Click to expand...
Click to collapse
OTA will fix it, I'm sure:
http://nexusexperience.weebly.com/changelog.html
Bad experience with this ROM. Had to reboot 3 times this morning due to the known sound issue so common with old 4.2.2 ROMs... Really extrange because I thought it was fixed in new KitKat ROMs... :silly:
I will test again next releases. Thanks!!
RC 1.9 works great.
BMM second system
Not sure what all the huss and fuss is about this ROM, I've been running it all day and it works great
My only complaint is slight lag. Other than that I love the idea behind this. Lightweight, but feature filled. Awesome work devs. Exactly what I look for in a ROM
Sent from my XT912 using XDA Premium 4 mobile app
Nandeh said:
Bad experience with this ROM. Had to reboot 3 times this morning due to the known sound issue so common with old 4.2.2 ROMs... Really extrange because I thought it was fixed in new KitKat ROMs... :silly:
I will test again next releases. Thanks!!
Click to expand...
Click to collapse
Be sure you don't use my JBX TEST build - it causes sound issue and freezes.
dtrail1 said:
Be sure you don't use my JBX TEST build - it causes sound issue and freezes.
Click to expand...
Click to collapse
I didn't use it, that happened with built-in stock kexec kernel...
Official Cyanogenmod 14.1 Motorola athene Released for Moto G4/G4 Plus.Find the below link for Download.
https://download.cyanogenmod.org/?device=athene
stkpxl said:
Yay! Guessing you need the latest soak test modem and bootloader to install though?
Click to expand...
Click to collapse
That's a negative. My understanding is the soak test is needed in the plus because of finger print scanner issues. I have the XT1625 and it runs great without the soak test. Flash the quark kernel too. Waaaaaay better benchmark results.
stkpxl said:
I just installed it. Definitely didn't need the soak test. VoLTE works too when I called my voicemail to check. No crash on the Gallery app either like I've seen reported. And the best part for me is that Republic Wireless works with it and the app works too! Usually they don't support custom ROMs but this time everything works.
Click to expand...
Click to collapse
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
I've just rooted my phone, I'm in 6.0.1, I just need to download and put this in SdCard, later Install w/o gapps and it will works?
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
mikemelbrooks said:
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
Click to expand...
Click to collapse
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Mexickano said:
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Click to expand...
Click to collapse
Were you trying to install the arm64 gapps? I could only install the arm gapps.
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Running 12222016 as of this morning. Have been using it since it first hit the streets. Seems a little unstable. While it's running, it runs great. However, for no apparent reason it reboots my device. I can't seem to pinpoint the cause as it happens sporadically and randomly.
I noted that the blue light filter "sort of" works. It has to be manually activated. Tried the automatic route but it's hit or miss.
hooks024 said:
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
Click to expand...
Click to collapse
That would be because the "other ones" are for MM based ROM's and 2.0/2.2 are for Nougat.
mikemelbrooks said:
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Click to expand...
Click to collapse
Fixed the camera by clearing the camera data and cache!
chrisjwild said:
Were you trying to install the arm64 gapps? I could only install the arm gapps.
Click to expand...
Click to collapse
Im a dumb, I was installing other gapps, now Im not getting any issue, only about video recording but I'll fix it flashing a boot.img.
Thanks to all.
I always install ROM boot it then go to browser and search Gapps it automatically finds the one I need then just download and reboot to recovery and install so I don't have any issues the Roms are all comparable for bothering devices but I think arm is different between devices if that helps anybody
:crying: Sad News Guys Cyanogen is shutting down all its services from 31st Dec 2016.
But
http://lineageos.org/
Hi,
I bought a Moto G4 for Christmas. I'll receive it tomorrow, and so I'm looking for a good custom rom. I had the Moto G 2014 LTE (thea) running CM14.1. I notice that the last CM build available for athene is the 20161225, and I'd like to know if it's stable. Does it have an option to make volume buttons control media volume instead of ringtone, for instance ?
Thank you, 'n have a nice day !
Yo is cm 14.1 gonna get xposed
I installed the CM 14.1 12/25 nightly on a XT1625 motoG4 non-plus. Upon reboot, the OS asked me to input my password. It was unable to decrypt my data.
I had a pattern PIN, so I looked up the proper numeric sequence and entered it, and the OS told me "my password was correct but the data was corrupt" and suggested I wipe my phone.
I tried this several times with different passwords, and even with completely incorrect passwords it said it was correct but the data corrupt. So I had to wipe my data. After wiping data, nougat 7.1 came up fine.
Note I have a SDcard set as adaptable storage. My guess (and it is only a guess) is this is what screwed me over.
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
slatteew said:
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
Click to expand...
Click to collapse
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
yakzockt said:
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
Click to expand...
Click to collapse
Thanks! I found the latest Nightly and also an updated LineageOS (replacement for Cyanogen since they've stopped) version, might try them both out. I was perusing the Soak Test and saw it doesn't work with XT1625 devices unfortunately. I have the XT1625 non-Amazon version with Republic Wireless. Saw someone posted earlier in this thread that Republic Wireless was working fine on CM 14.1 Nightly, so that gave me some incentive as well.