I got a NT not long ago and it is now rooted and running CM10, however I still lost in regards the 1gb user partition. CM10 is installed in that partition and I wanted in fact repartition the NT but the process seems to be confuse and risky so I was wondering if I have to stay llimited to work with just 1GB.
How about games and other programs I download? Are they all be installed in that 1gb?
I inserted a 16gb card but I cannot re -direct the apps to install in the external or even move them to the sd ext card. I also cannot see it with a file manager.
Could I use the B&N partition to load movies, apps etc or it will be sitting there useless?
Is there maybe an easier way to re-flash and repartition?
Thank you
BUMP!
You can reaprtition the same way they do in stores if you want to and get an 8GB partition for own storage. The repart.img mentioned in many other topics will do that for you. You will loose everyhting and get right back to out of the box stock firmware if you do it, but it's really easy.
asawi said:
You can reaprtition the same way they do in stores if you want to and get an 8GB partition for own storage. The repart.img mentioned in many other topics will do that for you. You will loose everyhting and get right back to out of the box stock firmware if you do it, but it's really easy.
Click to expand...
Click to collapse
Thank you Asawi, yes I really would like to repartition it. I hate to have that wasted space.
I will try find the best thread on how to use the repart.img. or please point me out in case you already know.
Thanks!!
http://forum.xda-developers.com/showthread.php?t=1663836
The download link is in the very beginning of this post. If you've got image writing software already you can then jump to step 2. Extract the downlad and burn the reaprt.img to a card. Insert card and boot to it. After a few minutes a green chejmark should appear. (If a red cross appears instead you're in trouble.) Remove card and an update starts and goes on for a few minutes and you can then start over with yout CM10 install again.
asawi said:
http://forum.xda-developers.com/showthread.php?t=1663836
The download link is in the very beginning of this post. If you've got image writing software already you can then jump to step 2. Extract the downlad and burn the reaprt.img to a card. Insert card and boot to it. After a few minutes a green chejmark should appear. (If a red cross appears instead you're in trouble.) Remove card and an update starts and goes on for a few minutes and you can then start over with yout CM10 install again.
Click to expand...
Click to collapse
So after doing this will I have to reroot or I just have to reinstall cm10? Getting my 16gb card in the mail (hopefully today) should I wait to get the card or can I just copy everything from my 8bg to the 16 and everything remain? Thank you for your help!
It's probably me being stupid, but I don't understand what setup you have and quite what you are talking about. Running the repart .img will completely erase everything on the device and set it back to freshly bought. Whatever you have in internal memory that you want to save you need to save somewhere else.
I don't get your reasoning that CM10 is installed in your 1GB partition, because that is not the norm.
Probably me being stupid, but I can't help you.
Mystina83 said:
So after doing this will I have to reroot or I just have to reinstall cm10? Getting my 16gb card in the mail (hopefully today) should I wait to get the card or can I just copy everything from my 8bg to the 16 and everything remain? Thank you for your help!
Click to expand...
Click to collapse
Never mind I fully read the post and now know I will have to reroot. Glad I bookmarked all the pages I used.
Mystina83 said:
Never mind I fully read the post and now know I will have to reroot. Glad I bookmarked all the pages I used.
Click to expand...
Click to collapse
Well, if you're installing CM10 you don't actually have to root as a separate process. Just install CM10 and rooting will come done at the same time. Itäs only if you plan to run stock you need to root.
If you have to go and get stuff from several pages you are probably not doing the installing in a very efficient way. Possibly things can be done a lot easier now than whe you originally did it.
Ihave made several posts outlining an extremely easy way to install CM. Look for them if you want to.
asawi said:
Well, if you're installing CM10 you don't actually have to root as a separate process. Just install CM10 and rooting will come done at the same time. Itäs only if you plan to run stock you need to root.
If you have to go and get stuff from several pages you are probably not doing the installing in a very efficient way. Possibly things can be done a lot easier now than whe you originally did it.
Ihave made several posts outlining an extremely easy way to install CM. Look for them if you want to.
Click to expand...
Click to collapse
I had already done the root from a video I saw on youtube then used your link for cm from the [Q] Noob Alert! Nook Tablet 8GB Rooting Question! post. So just doing the cm from that same post will also root my device? I don't really need anything on the actually nook. I got it as a gift and use the kindle app for all my books. I will defiently look into your other posts. I just got the NT a little less than a month ago.
If you root before installing CM10 you'll just overwrite the root you did, so no point in doing it.
Once CM10 is installed your Tablet should be rooted.
All you need to do is get into CWM 6.x.x an flash the ROM and appropriate gApps zips.
Related
I have been scouring these boards for hours and can't find my exact problem so I think I need to post this as a noob. I did Albert Wertz's method of rooting my Nook Tablet 16GB which he states will void the warranty. Afterwards I showed version 9.9.9 so I think it was rooted however I never saw superuser and such. I did something where the main menu bar no longer appears when pressing the n button too, annoying, I want it back too.
Anyway I booted into CWM from SD and then removed my boot SD and installed another SD with the img files on it. I have about 4 img files on it from throughout the day trying to update to CM7 and then tried a restore and just a CWM flash, every img file I select starts to perform it's update and somewhere around "extracting files" it says "installation aborted". At first I thought I had a bad memory card but both cards behave the same so I think they are good (creating 70MB partition on the CWM). I did a system restore on it and now it reports version 1.4.0 but I still get all the same errors, I'm stuck. I've spent about 9 hours of messing with this today and can’t think straight. I am going to bed and will try tomorrow, but if anyone could please tell me what I am missing I would very much appreciate it. Happy Easter ! Thanks, Mark O
markols said:
I have been scouring these boards for hours and can't find my exact problem so I think I need to post this as a noob. I did Albert Wertz's method of rooting my Nook Tablet 16GB which he states will void the warranty. Afterwards I showed version 9.9.9 so I think it was rooted however I never saw superuser and such. I did something where the main menu bar no longer appears when pressing the n button too, annoying, I want it back too.
Anyway I booted into CWM from SD and then removed my boot SD and installed another SD with the img files on it. I have about 4 img files on it from throughout the day trying to update to CM7 and then tried a restore and just a CWM flash, every img file I select starts to perform it's update and somewhere around "extracting files" it says "installation aborted". At first I thought I had a bad memory card but both cards behave the same so I think they are good (creating 70MB partition on the CWM). I did a system restore on it and now it reports version 1.4.0 but I still get all the same errors, I'm stuck. I've spent about 9 hours of messing with this today and can’t think straight. I am going to bed and will try tomorrow, but if anyone could please tell me what I am missing I would very much appreciate it. Happy Easter ! Thanks, Mark O
Click to expand...
Click to collapse
In CWM, you need to install from .zip files. It sound like you're trying to install .img.
Thanks... I was installing .zip files, not .img. I was pretty useless last night. I used Alberts 4_5SD recovery this morn and got it rooted to 9.9.9 and I had superuser and titanium backup so all was good. I ran NWM from internal on the tablet and told it to install ROM from the SD card. I pointed to the file and told it to backup, then install the new ROM it said an error had occured when I tried this. I then booted from another SD card to go to CWM and after the white screen with the box, it went into backup and then restored the ROM, however it took me back to a unrooted version. It looked for the ROM I wanted to load but that was on the other SD card. Now I am back at square one, frustrated...
I think I might have found the problem but I am not sure. When I was doing the original CM7 update I wrote CWM to the E drive, (MyNook) so now the drive reports a total size of .99GB with 433MB free. So CWM is installed on this drive and I think that is the proplem. Is there a way to get CWM off the E drive? If I can just uninstall it, will that be sufficient enough to get the root back and then correctly install CM7? Thanks again in advance.
I guess this is turning out to be an ongoing update from me, lol... I am back to a rooted Nook Tablet with 9.9.9 So since I am a glutton for punishment I will try again tonight to do the CM7. I simply deleted the CWM file that I found in the internal memory and it seemed to not hurt anything.
This time I am planning to download Indirect’s latest "NOOK Tab Recovery Flasher.apk" directly to my Nook Tablet, (at the inlaws now and no wifi
If I understand correctly it will install CWM direct on my tablet, I am just wondering where it will end up installed? Then I downloaded the file for internal CM7 installation, the file is named "Nook-Tablet-CM7-Alpha-Final-TEAM-B-signed" I have it and nothing else on the sd card. So when I run CWM from the Nook, I point to the .zip file on the SD card. Sounds easy but after three screw ups, I am aprehensive.
If someone could please confirm that this procedure and the files I am using are compatible and should work with my 16GB Nook Tablet. Again thanks very much and I hope all have been enjoying this Easter holiday........
markols said:
I guess this is turning out to be an ongoing update from me, lol... I am back to a rooted Nook Tablet with 9.9.9 So since I am a glutton for punishment I will try again tonight to do the CM7. I simply deleted the CWM file that I found in the internal memory and it seemed to not hurt anything.
This time I am planning to download Indirect’s latest "NOOK Tab Recovery Flasher.apk" directly to my Nook Tablet, (at the inlaws now and no wifi
If I understand correctly it will install CWM direct on my tablet, I am just wondering where it will end up installed? Then I downloaded the file for internal CM7 installation, the file is named "Nook-Tablet-CM7-Alpha-Final-TEAM-B-signed" I have it and nothing else on the sd card. So when I run CWM from the Nook, I point to the .zip file on the SD card. Sounds easy but after three screw ups, I am aprehensive.
If someone could please confirm that this procedure and the files I am using are compatible and should work with my 16GB Nook Tablet. Again thanks very much and I hope all have been enjoying this Easter holiday........
Click to expand...
Click to collapse
The steps that you have listed in this post are correct. If you do this exactly, everything should go according to plan.
Indirect's great app installs CWM to the recovery partition of your device, overwriting the B&N stock recovery. You can always go back to stock recovery if need be, though, so don't worry.
Thanks Solar.Plexus
The procedure worked as I hoped. I don't understand what went so wrong in my first attempt but the main thing is my wife doesn't look at me with THAT look anymore, since she thought I bricked her 12 hour old NT.....
markols said:
Thanks Solar.Plexus
The procedure worked as I hoped. I don't understand what went so wrong in my first attempt but the main thing is my wife doesn't look at me with THAT look anymore, since she thought I bricked her 12 hour old NT.....
Click to expand...
Click to collapse
No problem. Glad to hear your wife's happy again!
installaton aborted while installing clockmodrecovery
hii i am sagar
i want solution to this problem any body have solution means please reply
i am using micromax mad a94
when i am trying to install clockworkmod on my phone it always show like these
install/sdcard.....
finding update package......
opening update package.....
verifying update package....
installation aborted........
anybody have solution to this problem
please tell me
thank you
Did u solve it yet?
Sent from my iPod touch using Tapatalk
First off, thanks to all the devs for making this NT awesome...(and other devices, of course) Just want to get that out of the way. :good: :highfive:
I just got the NT from a 1saleaday deal for really cheap a month or so ago, knowing the dev community has made it awesome. And now, I'm getting around to opening the box, and before i set it up, i turned it off, to do some good ol' XDA research. And, oh boy, I've read a lot.... And, I'm seeing this NT being a new beast. Almost overwhelming...
And before i ask a few questions, just want to mention I've had 5+ android phones with TONs of flashing and modding done to them. I normally don't have any issue, and never ask questions, always research and contribute...
SO, with that said: Normally with android phones, What I'm used to is: Root, flash recovery, flash rom, bam, new hawtness. It's usually a simple process, to me... This NT seems to have a lot more to it...
Now my main question is: Do i really need to use an SD card to flash a recovery and CM10.1? I havn't even set this thing up, (let alone care about what is on it...lol) Is there a way i can just use the root methods found on the forum transfer the files to the NT, flash a recovery, and in that recovery flash a rom, all on just the internal memory? (I guess there needs to be partitioning as well... Where would that come in? Probably before the rom flash...) Or does the BN software/bootloader make this difficult on the NT?
I guess I'm looking for just a run down for my situation, where i don't need a backup of the BN software or anything on the tablet, because i just want a sweet tablet with CM10... :fingers-crossed:
Thanks a ton for looking!
warrior420 said:
First off, thanks to all the devs for making this NT awesome...(and other devices, of course) Just want to get that out of the way. :good: :highfive:
I just got the NT from a 1saleaday deal for really cheap a month or so ago, knowing the dev community has made it awesome. And now, I'm getting around to opening the box, and before i set it up, i turned it off, to do some good ol' XDA research. And, oh boy, I've read a lot.... And, I'm seeing this NT being a new beast. Almost overwhelming...
And before i ask a few questions, just want to mention I've had 5+ android phones with TONs of flashing and modding done to them. I normally don't have any issue, and never ask questions, always research and contribute...
SO, with that said: Normally with android phones, What I'm used to is: Root, flash recovery, flash rom, bam, new hawtness. It's usually a simple process, to me... This NT seems to have a lot more to it...
Now my main question is: Do i really need to use an SD card to flash a recovery and CM10.1? I havn't even set this thing up, (let alone care about what is on it...lol) Is there a way i can just use the root methods found on the forum transfer the files to the NT, flash a recovery, and in that recovery flash a rom, all on just the internal memory? (I guess there needs to be partitioning as well... Where would that come in? Probably before the rom flash...) Or does the BN software/bootloader make this difficult on the NT?
I guess I'm looking for just a run down for my situation, where i don't need a backup of the BN software or anything on the tablet, because i just want a sweet tablet with CM10... :fingers-crossed:
Thanks a ton for looking!
Click to expand...
Click to collapse
Congrats on your NT.
Now to your question,
No, you do not have to use the SD recovery method, but its really safe to keep a bootable recovery, that doesn't need any key persses or prompt to enter recovery.
Also having a bootable recovery , you can bypass the stock rooting, recovery flashing etc and directly get to flashing rom. So I'd suggest this. Even a 1gb (or maybe even smaller card) will do.
I personally feel partitioning is unnecessary.
warrior420 said:
Now my main question is: Do i really need to use an SD card to flash a recovery and CM10.1?
Click to expand...
Click to collapse
Maybe you can do it another way, but WHY?????
That's what makes the NT so "mod-friendly": that you can do so much via sd-card.
If you want to repartition and the BN partitioning scheme (8 GB user space) is OK for you but you don't have store nearby, burn "repart.img" to sd and run it before rooting.
Burn another image and use that for rooting and flashing an updated recovery.
Start up to that updated recovery and flash your ROM.
Easy peasy!
First off, thanks for the responses. Last night i hit the NT head on, and am a proud owner of a NT w/ CM10.1 :laugh: I'm REALLY impressed with how it runs 4.2.1. It pretty equal to my Nexus 7 (Hisssss lol..)
asawi said:
Maybe you can do it another way, but WHY?????
That's what makes the NT so "mod-friendly": that you can do so much via sd-card.
If you want to repartition and the BN partitioning scheme (8 GB user space) is OK for you but you don't have store nearby, burn "repart.img" to sd and run it before rooting.
Burn another image and use that for rooting and flashing an updated recovery.
Start up to that updated recovery and flash your ROM.
Easy peasy!
Click to expand...
Click to collapse
Haha, I guess I'm just used to all my Nexus gear thats had no SD card slots, using an SD card is just awkward now. I had to end up pulling out my old netbook to image the cards, lol. But all is good on the NT now. I put CWM6 on the eMMC, and flashed CM10.1, couldn't be happier. It was stable enough, I ended up setting it up for the Girlfriend and calling it her Christmas gift. Smoooth.. :angel: lol.
Glad you got it set up! And yes, CM10 is so smooooth running on these babies!!
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
P.S. First post in any forum ever, just a humble android noob searching for knowledge and stable Roms from those who offer, sorry if I have posted this in the wrong place, obviously I have posted at the wrong time! A million thanks in advance to anyone with good news or advice!
DB73 said:
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
Click to expand...
Click to collapse
What is it you are looking for? I have copies of a lot of ROMs.
doogald said:
What is it you are looking for? I have copies of a lot of ROMs.
Click to expand...
Click to collapse
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
DB73 said:
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
Click to expand...
Click to collapse
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
There is another method very well documented here: http://androidforums.com/eris-all-things-root/127861-universal-eris-root-dummies.html (which also walks you through installing for your first custom ROM.)
I have some ROMs in my Dropbox if you can't find links.
xtrSENSE (stock 2.1 Eris ROM, rooted): https://dl.dropbox.com/u/220420/Eris/xtrSENSE/xtrSENSE5.0.1.zip
Workshed's GSB: https://www.dropbox.com/s/dvpuv4sbwmun43f/GSB.v4.5-final_ODEXED_CM7.2-Eris.zip
CondemnedSoul's CM7.2: https://www.dropbox.com/s/g1irvshpg7u7trr/CCM7_Eris_V24_RIP.zip
The last two are CyanogenMod Gingerbread ROMs. I think that GSB requires that you also flash Google apps in order to get the market. If so, you can get it from CyanogenMod here: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
(So, if you need to flash gapps, you go into Recovery. Wipe data/factory reset. Flash the ROM. Flash google apps. THEN restart the phone.)
doogald said:
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
Just realized why it wouldn't let me post, because of the links in my reply, :silly:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
4. Is there any way to get google play instead of market working on the Eris?
(((Thanks again for everything)))
XML Parsing Error: unexpected parser state
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/toolkit/content/global/netError.xhtml
Line Number 308, Column 50:
Click to expand...
Click to collapse
DB73 said:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
Click to expand...
Click to collapse
Try this one: http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
CondemnedSoul's includes the Google apps already and does not require a separate flash of the gapps zip file.
Ok, I just checked: GSB does NOT require google apps, either; they are already included. You can ignore that step.
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
Click to expand...
Click to collapse
Oh, good question. I would avoid it if you can. The Eris will insist that you activate. However, if you follow the prompt to activate and then press the disconnect button as soon as you hear it ring, it will try activation again two more times. If you disconnect after hearing the ring those two times as well, the phone will give up on activation and allow to continue with setup.
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
Click to expand...
Click to collapse
Not necessarily. In my experience, xtrSENSE is fastest, but the GB ROMs are just fine. You may not notice the difference. However, xtrSENSE has a method called cache2cache that frees up more storage space or user applications and data. If you install a lot of apps, xtrSENSE may give you more space.
That said, there are disadvantages, including missing out on apps that do not run on android 2.1.
There is something called xtrcache2cache that you can flash on the GB ROMs to give you the same sort of space. I'll try to find a link.w
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
Click to expand...
Click to collapse
I've never tried it, and I can't believe it runs with any sort of decent performance anyway.
4. Is there any way to get google play instead of market working on the Eris?
Click to expand...
Click to collapse
Not on android 2.1, but the two gingerbread ROMs will update the market to the play store.
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
The download link there seems to work.
Copy that file (xtrCMCache2cache.zip) to your SD card. This is only for the Gingerbread ROMs - it's not necessary for xtrSENSE.
Restart the phone to recovery. If you have already flashed one of those ROMs, simply flash that xtrCMCache2cache.zip file - do not wipe data or Dalvik cache first. Restart the phone, and you'll have probably about 20-30 MB more free storage space for apps and data.
If you have not already flashed GSB or CondemnedSoul's, do this:
- restart in Recovery
- wipe menu
- wipe data/factory reset
- main menu
- flash a zip file, and choose GSB or Condemned
- flash a zip file, and choose xtrCMCache2cache.zip
- restart the phone
doogald said:
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
OK, I will read what I have gathered one or two more times before taking the plunge. I am thinking of using the Jcase method, it seems pretty much idiot proof. I have the file and ROMs stored on my PC, and now on a CD as well, just so I don't loose them. If I have this right, I will:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think! On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options. I guess the latter is best, and use only a custom ROM for my son to play with. Hopefully I can temporarily disable or somehow limit su before giving it too him.
4. Do Nand backup of original official image, and put somewhere safe, like 2 places + on CD then remove from SD for more available space.
5. Flash one of the 3 downloaded ROMs and also xtrCMCache2cache if desired to desire-c
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Edit # 2 I downloaded a MD5 calculator and this is the output (F34FECFFB985553B68D66F6AC1EF27D3) for the erisone010.apk file
Another big thank you Doogald, If I have something wrong here, please, feel free to beat it into me now, before I do something stupid!
Click to expand...
Click to collapse
DB73 said:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
Click to expand...
Click to collapse
No, Your regular SD card is fine. You do need to enable third-party app installs; you'll find that setting in settings->applications.
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
Click to expand...
Click to collapse
Yes. You must restart the phone as if you wanted to make a phone call. Many people get too eager and try to get into Recovery before full restarting.
I can't believe that flashing Amon_RA is all terribly dangerous. There are ways to recover. In fact, I have not seen anybody report a brick after running the JCase 1-click. I'm sure that it will be fine.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
Click to expand...
Click to collapse
You *could* do the Nand Backup before running rootme.zip. Actually, you only really need to run rootme.zip if you want to do something with root with the stock Android you have now. Some people may, for example, install the application Titanium Backup Pro (which requires root) and batch backup all user apps (menu->batch and choose to run that option from the list) and then, after installing a new custom ROM, reinstall Titanium from the market/play store and then batch restore all missing apps and data. It's a very powerful way to get the phone running all of your apps and data without reinstalling from scratch.
That brings up one more thing: if you decide to install xtrSENSE, you do not need to do a factory reset if you want to keep all of your apps and data. Of course, if you want a fresh start you may, but xtrSENSE will keep all of your apps and data and give you a faster Eris with more room for apps and data.
Also, it *is* possible to get stock recovery back, though not without losing all of you data. There is a ROM called Flashback_21v2 that will bring back stock recovery and an unrooted Eris if you wish. The phone will act as if it was never rooted. You can find it here: http://forum.xda-developers.com/showthread.php?t=792026
That would be a good thing to keep on your phone, just in case. (Though I have to say that I am hosting the location of those files on my website and I have no plans to stop doing so, so they should be around for a while...) You'll probably be fine with the "no radio" version, but if you can spare the space on your computer, (that's a bit of a joke; the files are small), I'd download both.
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think!
Click to expand...
Click to collapse
In that case, you DEFINITELY want to wipe data, even with xtrSENSE!
On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options.
Click to expand...
Click to collapse
No, you can do both. Do a Nand Backup of the phone after you root it, which will be stored on the SD card. Wipe data/factory reset and you can installa ROM and then always go back into recover and Nand restore what you backed up originally to get your phone back as it was when you ran the backup. Familiar with Norton Ghost for Windows PCs? That's what Nand backup and restore does - it takes a full snapshot of your phone as it is, and when you restore, it's as if you had just turned off your phone for a long time - it's back to the way it was at the time you made the backup. You can have multiple backups stored - as many as will fit on the SD card.
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
Click to expand...
Click to collapse
Well... xtrSENSE support apps2sd as it is, and there are scripts to turn that functionality on. The GB ROMs support using the Android-native moving of apps to sd, so I would avoid apps2sd for them.
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Click to expand...
Click to collapse
The MD5 I have for 1click is f34fecffb985553b68d66f6ac1ef27d3
HOWEVER, can I suggest instead that you use the 1-click root here, prepared by Scary Alien: http://androidforums.com/eris-all-t...2-custom-recovery-trackball-not-required.html
If you look at the bottom of the first post, "Scenario 5", there is another version of 1click with a better version of Amon_RA (that allows you to use the hardware keys to navigate recovery, rather than just the trackball; sometimes the trackball doesn't work in the original Amon_RA). That version I guarantee is safe, and Scary Alien has the MD5 right there.
I am guessing multi-quote is what I should have tried on this instead of deleting?
OK, running 1 click directly from from SD card. Third-party apps ticked on before hand, check.
After running 1 click, do normal restart, then shutdown, then go into recovery via vol / end start up.
No bricks reported, that is very good news. Also good to hear that there may be a procedure for un-bricking in the unlikely event!
My Eris already has already has all apps removed, I tried to make it as clean and small as possible. Just looked at the xtrSENSE page and copied some tips, sounds nice and fast, liking that!
Awesome, I downloaded all 3 including Cupcake, in case I want to remember what that was like.
I did exactly that, downloaded both.
I will give this some extra thought before giving it to my son.
I have never used Norton Ghost, but I have used Macrium Reflect, Seagate Disk Wizard, Acronis etc. I get the image/snapshot thing. I plan to store backups in other locations, then copy back to SD if and when needed.
Just did some reading on the xtrSENSE page about aps2sd, guess I will do some more reading about native moving of apps to sd soon.
The MD5 I have matches yours. I downloaded MD5 Calculator and I guess it works.
After reading the page including "Scenario 5" I absolutely agree. I downloaded it, and will use the "scary alien" modded version with the added functionality. Thank you very much for pointing this out. Looks like no change in the simple execution besides the app/file to run, very nice!
Doogald, I can clearly see that you go out of your way to help others to say the least, I am sure its appreciated by more than just me, Thanks!
DB73 said:
I will give this some extra thought before giving it to my son.
Click to expand...
Click to collapse
Hey, one other thing: CondemnedSoul posted a script that you can run that disables the mobile radio, so you can make the device WiFi only. It's here: http://forum.xda-developers.com/showthread.php?t=1216571
I have to say that I have never tried it, but it seems from the replies in that thread that many have, successfully.
Jelly Bean build anyone?
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
foodude1 said:
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
Click to expand...
Click to collapse
Of course it isn't redundant, in fact this maintains the forum active, well a bit.
Here is the Jellybean Rom you requested, it is from MongooseHelix's build. It has a different Gapps package from what MongooseHelix actually established but I assume no issues may occur. :highfive:
https://copy.com/TgfFHxTqOHPJ
Evening all,
I previously rooted my Nook Tablet 16gb using an SDCard and I believe CM7. I stopped using the nook for awhile and when I brought it back out CM7 would constantly crash. I don't know if I should start with the guide on the Android Developers sub forum as I don't know if that's current.
Could someone please point me in the right direction for where to get started? Is the SD card method the best? What launcher should I choose? I'll continue searching the forums but any help is greatly appreciated.
Thanks!
Punkrulz24 said:
Evening all,
I previously rooted my Nook Tablet 16gb using an SDCard and I believe CM7. I stopped using the nook for awhile and when I brought it back out CM7 would constantly crash. I don't know if I should start with the guide on the Android Developers sub forum as I don't know if that's current.
Could someone please point me in the right direction for where to get started? Is the SD card method the best? What launcher should I choose? I'll continue searching the forums but any help is greatly appreciated.
Thanks!
Click to expand...
Click to collapse
CM10+ is your best bet. It's based on Jelly Bean. Pretty stable also. CM10 released a stable version on 12/31 and CM10.1 is almost to it's stable release (RC4 was just released.)
The succulent versions are my favorite. Go to http://iamafanof.wordpress.com/ and check out some of the posts. Find something you like. If you need help just let me know.
Punkrulz24 said:
...
Could someone please point me in the right direction for where to get started?
...
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31.
Thanks to the both of you. Data, in my own research I have found the Succulent versions of which you speak. So far I've been following this guide here, but I've run into a pretty big issue. The images that I'm trying to download are hosted on this goo.im site, and I'm having numerous problems trying to download from there. If I can get the download to work, it slows to a crawl then ultimately stops. Any browser I use fails with this.
I'm still searching, however do you know of any other mirrors I would be able to download the releases?
Also, the Nook was already previously rooted. Do I need to update CWM or the root to be able to use CM10? And if so, how?
Thanks!
I managed to download the files that were necessary and got it running. The only problem I'm having now is the sluggishness that is being caused by CM10.1. Waiting to see if this is fixed via a reboot, but it's even taking a little while just to open the book on the Nook. I don't know if this is due to having previous files on the nook or anything. I need to start looking into ways to completely restore the Nook to factory condition and work at it from there as well. Even after the reboot just bringing the Nook out of lock can take awhile.
Also it appears some report that this can be untethered... and some report that they always have to reboot with power plug to get it to load CM10.1. Has anyone been able to force the issue one way or the other? Any idea why some have success and some don't? As always I'll continue searching, but if you get to the answers before I do I would appreciate it.
Punkrulz24 said:
I managed to download the files that were necessary and got it running. The only problem I'm having now is the sluggishness that is being caused by CM10.1. Waiting to see if this is fixed via a reboot, but it's even taking a little while just to open the book on the Nook. I don't know if this is due to having previous files on the nook or anything. I need to start looking into ways to completely restore the Nook to factory condition and work at it from there as well. Even after the reboot just bringing the Nook out of lock can take awhile.
...
Click to expand...
Click to collapse
If you're running CM internally on EMMC I'd suggest you wipe /data (which will entail reloading your apps from Google Play) and /cache; if you're running CM off SD card you'd need to wipe the /data partition on the SD card (aka /data1 if you're using CWM version compiled by Succulent).
digixmax said:
If you're running CM internally on EMMC I'd suggest you wipe /data (which will entail reloading your apps from Google Play) and /cache; if you're running CM off SD card you'd need to wipe the /data partition on the SD card (aka /data1 if you're using CWM version compiled by Succulent).
Click to expand...
Click to collapse
Digi I believe it's off of the SDCard. When I boot the Nook w/o power or SDCard it loads Nook software + root. I went ahead and formatted the data partition as well as the system partition (for some reason in my partition manager it was listed as EXT3)... got everything squared away. The OS part of it seems to be running a bit better right now... Loading a book in the Nook app still takes forever but I'm beginning to think that's because it's Game of Thrones, and it merged 4 books into one so it's like 3500 pages. It takes between 45-60 seconds to load each time I go in.
Punkrulz24 said:
Digi I believe it's off of the SDCard. When I boot the Nook w/o power or SDCard it loads Nook software + root. I went ahead and formatted the data partition as well as the system partition (for some reason in my partition manager it was listed as EXT3)
...
Click to expand...
Click to collapse
/system's partition type is supposed to be ext3.
... got everything squared away. The OS part of it seems to be running a bit better right now...
...
Click to expand...
Click to collapse
You might want to take a look at this thread http://forum.xda-developers.com/showthread.php?t=1005633 which discusses comparative performance of different brands and classes of SDcard for the purpose of running ROM.
CM10.1 is a speed demon on my mom's NT. I've never ran on anything but emmc, however.
Sent from my DROID RAZR MAXX HD
I've basically spent my entire day off from work trying to root my Nook Tablet 8GB to get CM10.1 put on it, and I'm ready to yank my hair out. A while back I successfully got CM10 on an sdcard and have been running that from the sdcard while my warranty was still active (just in case). Now my warranty's run out, and CM10 had been running sluggish for a while, in spite of my cleaning off all unnecessary files regularly. So I figured I'd try an internal ROM install. After hunting around for some really good detailed instructions for noobs (because I totally am one), I found this post (http://forum.xda-developers.com/showthread.php?t=2037368) and decided that even though it looked inefficient to go from CM7 to CM10, it broke the steps down enough for me to follow along.
However, I'm now stuck with CWM not reading the sdcard once it's time to install CM7 and gapps from the zip files. I keep getting the message, "No files found." I've tried unmounting the sdcard (and mounting "sd-ext," just for kicks), and it says, "Error unmounting /sdcard." If I try choosing "format /sdcard," it says, "E:format_volume failed to unmount '/sdcard.'" I've tried popping it out and back in multiple times. I've tried formatting in SDFormatter over again (even did a full overwrite erase, which takes forever, b/c I got a message saying the device doesn't support flash erase). I've been using Minitool to ensure that the partition is always FAT32, primary, set to active. I've gone into the stock OS and used a workaround I found to ensure that it will install apps from unknown sources. I've tried doing the root again from the beginning (which is a pain in the butt because I only have 1 sdcard to use for both the root and the ROM, so I have to keep switching the files out). I have no idea what I could be doing wrong, but I fear that it's something really basic.
Does it matter that I'm leaving the partition labeled "boot" for the ROM install? Is there a better way to put the files on the sdcard besides just with a Windows drag and drop? Is there a way for me to reboot the Nook from within CWM to maybe force it to read the sdcard fresh (keeping in mind that the sdcard no longer has the CWM files on it by that point)? I've seen some info online about people having issues with this class of sdcard, but I really don't want to spend the money on a new one until I rule out the possibility of a stupid user error. I'm also loathe to give up and go back to running a ROM from the sdcard because I've already put over 8 hours into trying to make use of the full Nook memory... If anyone has suggestions, I'd greatly appreciate it. Please keep in mind that any instructions will need to be very, very basic, though.
CWM version 5.0.2.8
sdcard type: SanDisk 8GB Class 4
Files on the sdcard: cm-7-TEAM-B-BETA1-signed.zip and gapps-jb-20130301-signed.zip
MidnightFrost1701 said:
I've basically spent my entire day off from work trying to root my Nook Tablet 8GB to get CM10.1 put on it, and I'm ready to yank my hair out.
...
Click to expand...
Click to collapse
There is no point in flashing CM7 if you're aiming to immediately flash CM10 on top of it.
To flash CM10.x, I'd suggest you try the process outlined at http://forum.xda-developers.com/showpost.php?p=35669871&postcount=1. See http://forum.xda-developers.com/showpost.php?p=42985699&postcount=117 if you'd like to use a more recent CM10.1 build.
...
Files on the sdcard: cm-7-TEAM-B-BETA1-signed.zip and gapps-jb-20130301-signed.zip
Click to expand...
Click to collapse
You'll need an older version of gapps to go with CM7, see http://goo.im/gapps.
digixmax said:
There is no point in flashing CM7 if you're aiming to immediately flash CM10 on top of it.
To flash CM10.x, I'd suggest you try the process outlined at http://forum.xda-developers.com/showpost.php?p=35669871&postcount=1. See http://forum.xda-developers.com/showpost.php?p=42985699&postcount=117 if you'd like to use a more recent CM10.1 build.
You'll need an older version of gapps to go with CM7, see http://goo.im/gapps.
Click to expand...
Click to collapse
Thank you, I'll try that tonight after work! After having been through the steps in the original instructions so many times, I'm familiar enough with things like Minitool Partition Wizard that I can get by with slightly less noobish instructions now. So that's one silver lining... [crosses fingers]
It seems to have worked! The first time I tried to turn it on after the install, the screen went and stayed black after the initial Cyanoboot screen. So I forced a reboot, but it appears to be running just fine! Thanks for the help!