So I accidentally used the x.xx.1700.x - Google Edition (WWE) Firmware from [GUIDE] [16.08.2013] Jelly Bean firmware collection for different Carriers ID (CID)
Is there anyway for me to get back to stock? Or do I have to wait for a 4.2.2 and 4.A.18.3263.15 baseband RUU?
I feel your pain...
slypenguin0 said:
So I accidentally used the x.xx.1700.x - Google Edition (WWE) Firmware from [GUIDE] [16.08.2013] Jelly Bean firmware collection for different Carriers ID (CID)
Is there anyway for me to get back to stock? Or do I have to wait for a 4.2.2 and 4.A.18.3263.15 baseband RUU?
Click to expand...
Click to collapse
I did the same thing. Oops. There is currently no way to roll back unless you were already S-OFF before you flashed. You can get back to stock in just about every way but the firmware by installing a stock ROM in recovery: http://forum.xda-developers.com/showthread.php?t=2384631
Related
can i downgrade 2.1 do 1.5?
and where to find 1.5 android os
To download from a 2.1 custom rom to a stock 1.5 rom simply download a new rom here:
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=283&act=sd&cat=all
If your on a generic phone choose the last one in the list. You will be asked to input your serial number, this is to ensure you get the right rom for your phone.
This will revert your phone back to the Sep 11 2009 update (1.5).
alfamobil said:
can i downgrade 2.1 do 1.5?
and where to find 1.5 android os
Click to expand...
Click to collapse
If you flashed the official htc 2.1 update you can't go back to 1.5 ..........
can be flash other custom rom if i flashed the official htc 2.1 update?
my doubt is the same, can we flash another gsm 2.1 official update?
casca said:
my doubt is the same, can we flash another gsm 2.1 official update?
Click to expand...
Click to collapse
you can't and you lost the root
i wait the official eclair rotted by our chefs
ok...tks...will wait for the rooters to crack it open
It may be a long wait or never that the bootloader gets unlocked on the 2.1 RUU.
HTC have really tried to lock that rom down. Once you have root access its always best to stick to custom roms, the warning was on this site for months now.
I just revert my hero from 2.1 update 1 to stoc 1.5 hero UK JUSt by flashing with the old stock rom.
this is nice!
[Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OFF
Hi XDA,
I just obtained LazyPanda S-OFF (after being rooted and HTCDev Unlocked/S-ON since I got my phone)
I'm still on my original rom and firmware my phone got shipped with, never took an OTA (thank god)
I have Titanium Backup PRO, and TWRP v2.4.1.0 (the latest version)
(I read that someone had to downgrade TWRP to v2.3.3.0 to install the newest JB rom - took him 3 hours of trying with TWRP v2.4.1.0 until he tried v2.3.3.0 and it worked) - Link: http://forum.xda-developers.com/showthread.php?t=2045929&page=62
Has anyone successfully flashed the new JB rom with the latest TWRP?
AND
If I flash the odexed rom (from -viperboy-) will that include the firmware & radio? If not, should I flash the firmware that won't update/include the newest HBoot? (or do I need the new HBoot?) I'm on LazyPanda's 1.12 (v1.12.xxx - the modded version) Or because I'm S-OFF it doesn't matter if HBoot gets updated/overwritten because I'll still retain root & S-OFF?
I just want to know what files to install, and how to install them properly (please include links and good directions) I already watched wwjoshdew's videos on YouTube.
Thanks in advance, zmag
Roms do not include firmware/radios.
The firmware updates are found here READ thru the last 10-20 pages before you flash any firmware...better to be safe then sorry.
When you are ready to flash use the Full Firmware
There is no need to update your hboot.
I have all my firmware updated including the touch panel drivers and I can use twrp 2.4.1.0 but if you update the touch panel drivers you can ONLY use roms based on 3.16. In order to flash a 3.15 JB rom you would have to flash the older touch panel drivers and use an older version of twrp AFAIK
Re: [Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OF
You can update firmware from my thread by flashing the latest (3.16) firmware.
As far as ROMs go, with TWRP 2.4.1.0 you won't be able to flash 3.16-based ones with an outdated update binary. If you want a 3.16-based ROM, you can flash MeanBean, or my stock rooted.
If you want to flash a 3.15 base ROM, that should be no problem.
Thank you for the heads up guys!
So I'm going to update just the firmware/radio for now: (with this file) PJ75IMG_Jewel_3.16.651.3_firmware_extended.zip - correct? (Sorry just making sure)
Re: [Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OF
zmag said:
Thank you for the heads up guys!
So I'm going to update just the firmware/radio for now: (with this file) PJ75IMG_Jewel_3.16.651.3_firmware_extended.zip - correct? (Sorry just making sure)
Click to expand...
Click to collapse
Yes, that is correct.
Thank you for guiding me through this captain throwback, I _finally_ did my first firmware update and everything works great.
I'm still on the original rom, until I decide if I want to update to JB (the touchscreen drivers are what's making me nervous to be honest)
All in all, thank you! I'll read through your thread and direct any further questions there if necessary!
So if I want to install MeanBean, and update the Firmare to 3.16, I can flash MeanBean first, then update the Firmware, correct?
I am on the stock firmware, running the stock OS, and have not taken any OTA's. Is there an issue with flashing the most current firmware, or do I have to "step up" by flashing older firmware updates in sequence until I get to the most current?
Thanks
Re: [Q] Updating rom or firmware/radio from 1.13.651.1 to 3.15.651.13? Rooted & S-OF
mr0roboto said:
So if I want to install MeanBean, and update the Firmare to 3.16, I can flash MeanBean first, then update the Firmware, correct?
I am on the stock firmware, running the stock OS, and have not taken any OTA's. Is there an issue with flashing the most current firmware, or do I have to "step up" by flashing older firmware updates in sequence until I get to the most current?
Thanks
Click to expand...
Click to collapse
As long as you use the firmware zips from my thread, you can flash the latest firmware with no problems. The order of flashing ROM versus firmware shouldn't matter.
So I'm currently using "CleanROM Professional Edition 4.3" (march 2012) and want to upgrade to a newer/better ROM, such as Infection 2.6, but afraid it will screw my phone up as I haven't messed around with it in over a year:
My current phone details:
Android version: 4.0.3
HTC Sense: 3.6
Kernel: 3.0.16 , baseband 1.22.10.0310r build 3.11.604.22
PRI Version: 1.16_002, 2.07_002
PRL Version: 15223
ERI Version: 5
Phone is S-ON with recovery RA-VIGOR-v3.13
What ROM do you guys recommend I update to from this, and how should I go about doing it? Do I need to update the firmware first, anything special I need to do from my current set up, etc...?
devloperguy said:
So I'm currently using "CleanROM Professional Edition 4.3" (march 2012) and want to upgrade to a newer/better ROM, such as Infection 2.6, but afraid it will screw my phone up as I haven't messed around with it in over a year:
My current phone details:
Android version: 4.0.3
HTC Sense: 3.6
Kernel: 3.0.16 , baseband 1.22.10.0310r build 3.11.604.22
PRI Version: 1.16_002, 2.07_002
PRL Version: 15223
ERI Version: 5
Phone is S-ON with recovery RA-VIGOR-v3.13
What ROM do you guys recommend I update to from this, and how should I go about doing it? Do I need to update the firmware first, anything special I need to do from my current set up, etc...?
Click to expand...
Click to collapse
What's the issue with the current rom you have? Do you want to stick to Sense? I would suggest updating the firmware if you go to a more current rom. Check out the Dev sections for current roms to pick from.
mjones73 said:
What's the issue with the current rom you have? Do you want to stick to Sense? I would suggest updating the firmware if you go to a more current rom. Check out the Dev sections for current roms to pick from.
Click to expand...
Click to collapse
Issue with my current ROM is it's a little unstable, has bad bluetooth and it crashes once every other day at random times. And would like to try a ROM with Jelly Bean OS.
What do I need to do to get my current set up to S-OFF, do I have do a complete factory reset and go back to the everything original (is that even possible after I unlocked the bootloader)? Or can I just flash the stock recovery (is that what stock RUU means?)?
And then will JuopunutBear S-OFF work?
devloperguy said:
Issue with my current ROM is it's a little unstable, has bad bluetooth and it crashes once every other day at random times. And would like to try a ROM with Jelly Bean OS.
What do I need to do to get my current set up to S-OFF, do I have do a complete factory reset and go back to the everything original (is that even possible after I unlocked the bootloader)? Or can I just flash the stock recovery (is that what stock RUU means?)?
And then will JuopunutBear S-OFF work?
Click to expand...
Click to collapse
You don't need to be s-off to install roms, there's just some extra steps in flashing the kernel.
Also I see you have duplicate posts with the same question, I'd close one if you can...
Any way to get hold of the ATT 4.2.2 kernel or fimware for the C105A?. I want to go back to stock so the OTA update to 4.4.2 goes through. SamMobile have deleted the firmware from their server.
Cheers.
Hey guys. I've been on the "Beans" rom forever (Build 21) and starting to have some issues so wanna try flashing a new rom. I have the Verizon Note 2 rooted with unlocked bootloader (Never took the OTA that locked it) so I have Android 4.1.2 at the moment with VRAMC3 Baseband version. What do I need to do if anything before flashing CM 10.1? Do I need to upgrade firmware or anything? I heard you can brick if you flash a newer rom without upgrading your firmware first? I believe CM10.1 is Android 4.2 so I'd be going from 4.1.2 to 4.2 so I dunno. I'm also using an older version of TWRP as my recovery. Should I download the latest TWRP and flash that first? It's been a while since I did any fancy stuff with my phone just wanna make sure I don't mess it up. Thanks in advance everybody