White back housing? - HTC Droid DNA

Do any of you know if this will work on the DNA? It looks right and it says DNA.
http://www.ebay.com/itm/Full-Housing-Battery-back-Cover-Bezel-Frame-For-HTC-Droid-DNA-X920e-Butterfly-/261257159299?pt=LH_DefaultDomain_0&var=560216300707&hash=item3cd423e283

I wouldn't get it. It says it's for the DNA or the Butterfly, which aren't backwards compatible. They're slightly different sized and constructions. No telling which it actually works with without purchasing.
Sent from my Ecliptic DNA

Hi.
x920e parts should be interchangeable with the DNA. If you get the battery back for a x920e, it won't have wireless charging.
All together there are four variants of the HTC Butterfly.
Hi,
All together there are four variants of the HTC Butterfly.
HTC J Butterfly (HTL21) 143 x 71 x 9.2 mm
HTC Butterfly (X920d) 143 x 70.5 x 9.08 mm
HTC Droid DNA 141 x 70.5 x 9.73 mm
HTC Butterfly (X920e) 141mm(L) x 70.5mm(W) x 9.08mm(T)
The Glass should be inter change able between x920e & DROID DNA both at 141 mm tall and the HTL21 & X920d both at 143 mm tall.
A great article comparing the four different versions, with lots of pictures of all four side by side at Engadget.
I ordered a White with Red buttons X920e Glass/Digitizer/LCD for my Verizon branded DROID DNA by HTC and it fit perfectly.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app

thehoovie said:
Hi.
x920e parts should be interchangeable with the DNA. If you get the battery back for a x920e, it won't have wireless charging.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
The x920e is slightly thinner then the DNA, if that's just the wireless charging or what, its something to note.
Sent from my Galaxy Nexus using Tapatalk 2

It's simple to replace the back right? Just use a tool to pry it off and put the new one on?

Simple sure. Slowly. Carefully. When I did mine I pried a bit too hard and have a small stress crack by the USB charge port. While that is the recommended point of entry, I ended up getting under the volume rocker better. Be careful. Go slow. There is a gasket type seal you may want to try to keep and reuse if a new back does not come with one. Another thing I did not read else where is there is some adheasive seal around the speaker.
Be careful. Go slow. Mind the stress on the USB cut out, the volume rocker, and the speaker area.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app

thehoovie said:
Simple sure. Slowly. Carefully. When I did mine I pried a bit too hard and have a small stress crack by the USB charge port. While that is the recommended point of entry, I ended up getting under the volume rocker better. Be careful. Go slow. There is a gasket type seal you may want to try to keep and reuse if a new back does not come with one. Another thing I did not read else where is there is some adheasive seal around the speaker.
Be careful. Go slow. Mind the stress on the USB cut out, the volume rocker, and the speaker area.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
If you don't mind could you post a photo of your phone? It doesn't matter when since it's pretty late where I am and I'm about to turn in anyways.

Here are some pictures of my DROID DNA with a Butterfly x920e glass white with red soft keys. And of the stress crack on the back cover by the USB port where I pried too hard.
The height and width are the same on these models. While I don't know for sure for sure if the back fits it should, the back should be about half a mm more because of the QI charging. Now that I successfully swapped my screen I want a white back to !
~Hoovie
Sent from my HTC6435LVW using xda app-developers app

thehoovie said:
Here are some pictures of my DROID DNA with a Butterfly x920e glass white with red soft keys. And of the stress crack on the back cover by the USB port where I pried too hard.
The height and width are the same on these models. While I don't know for sure for sure if the back fits it should, the back should be about half a mm more because of the QI charging. Now that I successfully swapped my screen I want a white back to !
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
That is freakin' sexy right there.
Sent from my HTC6435LVW using xda app-developers app

thehoovie said:
Here are some pictures of my DROID DNA with a Butterfly x920e glass white with red soft keys. And of the stress crack on the back cover by the USB port where I pried too hard.
The height and width are the same on these models. While I don't know for sure for sure if the back fits it should, the back should be about half a mm more because of the QI charging. Now that I successfully swapped my screen I want a white back to !
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
That's really sexy right there man.

thehoovie said:
Here are some pictures of my DROID DNA with a Butterfly x920e glass white with red soft keys. And of the stress crack on the back cover by the USB port where I pried too hard.
The height and width are the same on these models. While I don't know for sure for sure if the back fits it should, the back should be about half a mm more because of the QI charging. Now that I successfully swapped my screen I want a white back to !
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Wanna trade? Lol. What's that purple looking light beside the proximity sensor?
Sent from my Ecliptic DNA

_phoey said:
... What's that purple looking light beside the proximity sensor? ...
Click to expand...
Click to collapse
Hi.
I'm pretty sure that the slit to the right of the logo is for both the Proximity sensor and the Ambient light sensor. I never saw it with the original font , though I never took pictures of it. It only shows on pictures as pink or purple or in complete darkens it glows slightly red.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app

thehoovie said:
Hi.
I'm pretty sure that the slit to the right of the logo is for both the Proximity sensor and the Ambient light sensor. I never saw it with the original font , though I never took pictures of it. It only shows on pictures as pink or purple or in complete darkens it glows slightly red.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Oh, I was thinking it was a differently positioned notification LED or something.
Sent from my Ecliptic DNA

thehoovie said:
Here are some pictures of my DROID DNA with a Butterfly x920e glass white with red soft keys. And of the stress crack on the back cover by the USB port where I pried too hard.
The height and width are the same on these models. While I don't know for sure for sure if the back fits it should, the back should be about half a mm more because of the QI charging. Now that I successfully swapped my screen I want a white back to !
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Where did you get that glass? How much was it? Man, I want one! Those red keys look amazing!
Sent from my HTC6435LVW using xda app-developers app

I got my LCD digitizer glass as one piece from eBay. I paid 92$ with shipping. I see a few for 75$ now.
Sent from my HTC6435LVW using xda app-developers app

thehoovie said:
I got my LCD digitizer glass as one piece from eBay. I paid 92$ with shipping. I see a few for 75$ now.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
How is the quality of the lcd panel?

The LCD panel isn't changed. It's the digitizer that is fused to the glass.
Have you noticed any issues with it? It is just as accurate as the original? I see eBay listings for replacement glass (I kinda like the black with no Verizon logo and red buttons) for as little as $23 to as high as over $100 and both listings provide the same level of details and look identical. Even the one with the HTC logo isn't an actual HTC OEM panel (the listing says "origina!" not "original").

http://item.mobileweb.ebay.com/viewitem?itemId=300894844116
Just need this now
Sent from my SCH-R970 using xda premium

Infinite Jest said:
How is the quality of the lcd panel?
Click to expand...
Click to collapse
I ran it side by side with a stock(original) DNA and I saw no differences. I remember having a hard time to see outside in the sunlight. I duno't know if I am used to it now, or if it is actually a little better.
drumz0rz said:
The LCD panel isn't changed. It's the digitizer that is fused to the glass.
Have you noticed any issues with it? It is just as accurate as the original? I see eBay listings for replacement glass (I kinda like the black with no Verizon logo and red buttons) for as little as $23 to as high as over $100 and both listings provide the same level of details and look identical. Even the one with the HTC logo isn't an actual HTC OEM panel (the listing says "origina!" not "original").
Click to expand...
Click to collapse
Yes it is, I replaced the LCD/Digitizer/Glass as one part because I read about low sucess rates seperating the LCD from the glass/digitizer. No issues with the product replacement. I should have gotten an adhesive surround thing or something, as I re used the one that was there, that is not as sticky as it was before and the one corner of the adheasive gasket is not smooth. For the first few days the one corner stuck our about .5mm but after being in my pocket with pressure on the glass to the housing its better. Just the Glass& Digitizer should be in the twenty something dollar range. Just the LCD should be around sixty. Together as one part, I see now from 75-125.
Zarboz said:
http://item.mobileweb.ebay.com/viewitem?itemId=300894844116
Just need this now
Sent from my SCH-R970 using xda premium
Click to expand...
Click to collapse
No, that listing is the wrong thing for our DNAs. The listing even has errors. It says the x920e in the listing but it can not be. That listing is for a back cover with an SD card. The x920d and the HTL21 have SD cards and a larger cur out on the top of the back cover. The x920e and the DNA have no cut outs are are a couple mms shorter than the other two.
I am going to order this Battery door tomorrow when I get paid.
http://www.ebay.com/itm/290940405280

I see. So for about $120 you can get the white back and the white front, and have a sweet white with red accents DNA! Someone do this. I want to see pics! Damn, when I dropped my DNA last winter I had to pay $100 insurance to replace the phone. I totally would have spent the extra few bucks and tricked out my phone to be white!

Related

Changing Capacitive and LED lights.

Hi I was browsing around and noticed some 3vo owners who have changed the Capacitive and LED lights in there devices. Me as a noob would like to do this but am having problems on how I should. I went on eBay and bought some blue LeDs and was wondering if anyone who has done this can.point me into the right direction without me ruining my fone. I would appreciate any responses.
Sent from my PG86100 using XDA Premium App
Just put electrical tape to cover them up. You have seen the earlier thread with everyone doing right? I did mine 3 weeks ago with blue and hasn't faded one bit.
chillenandy321 said:
Just put electrical tape to cover them up. You have seen the earlier thread with everyone doing right? I did mine 3 weeks ago with blue and hasn't faded one bit.
Click to expand...
Click to collapse
Dude link me, I wanna see what it looks like?
I haven't seen that thread at all where is it at? And since you've already done it how hard is it to do? I already bought the LEDS.... I wish I knew I could do it with tape. Smh.
Sent from my PG86100 using XDA Premium App
I've seen it on youtube with red leds.
Your better off coloring them with a Sharpie marker (I did it with my blackberry) than trying to physically swap them. I tried to do a soldiering repair to a USB wifi thingy and ended up cooking the board.
ACM_EVO said:
I've seen it on youtube with red leds.
Click to expand...
Click to collapse
Playing dead space? Lol. If so that would be mine.
Sent from my PG86100 using Tapatalk
phatmanxxl said:
Your better off coloring them with a Sharpie marker (I did it with my blackberry) than trying to physically swap them. I tried to do a soldiering repair to a USB wifi thingy and ended up cooking the board.
Click to expand...
Click to collapse
This. Or tape and a Sharpie. Don't see why swapping them is a good idea at all. What if something outside of the swap requires you to take it in for warranty? You gotta make that look stock again. Removing tape is easy. Resoldering a tiny led is a hassle.
Sent from my PG86100 using Tapatalk
What kind of tape and will the tape be noticable? And where would it go, inside the phone?
Sugar, Spice, and everything Nice!!!
http://forum.xda-developers.com/showthread.php?t=1150224
knowledge561 said:
What kind of tape and will the tape be noticable? And where would it go, inside the phone?
Sugar, Spice, and everything Nice!!!
Click to expand...
Click to collapse
Yep. Colored vinyl tape inside the phone over the little led lights. And just for good measure (in case the colored vinyl fades, like mine did) use a colored Sharpie over the tape. Then put it back together.
Sent from my PG86100 using Tapatalk
Damn who wants some LEDs? Blue. will be here sometime this week. Soldering sounds hard so I got em for no reason so ill just use the tape and give these to someone who wants them. Pm me if u want em. U pay shipping. I'll just use tape.
Sent from my PG86100 using XDA Premium App
Just got red, blue, green and yellow LEDS for 12 bucks off ebay. And for all who want to know soldering is very simple! Tape and markers do work but replacing the leds them selves is very rewarding. I have not posted here but I know phones and cars! Write up coming soon!
Sent from my PG86100 using XDA App
boostbounds4 said:
Just got red, blue, green and yellow LEDS for 12 bucks off ebay. And for all who want to know soldering is very simple! Tape and markers do work but replacing the leds them selves is very rewarding. I have not posted here but I know phones and cars! Write up coming soon!
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Please do my brotha.
Sent from my PG86100 using XDA Premium App
Replacing LEDS
For the write up visit my page , for the thread on this.
photos....
These are the photos for ya!
Check out this auction for one of my evo 3Ds ...
Up for sale is my rooted/unlocked EVO 3D! in near perfect condition! phone has had the LEDS on the home row swapped for RED! this phone is loaded with extras and comes with every accessory available , literally! MHL cable/2 home chargers/1 dock stand charger with extra battery charger/1 wall dock charger/ 5 extra batteries/ 3 data cables/ 3 screen protectors/ sprint car charger/bluetooth headphones(mic doesnt work,and needs new ear pads)/ MOTOROLA T-505 FM TRANSMITTER/ 2 stylus/ car windshield holder. thanks for looking!
Message me your serious offers!
Sent from my PG86100 using XDA App

HTC one x+ body damage

Ok guys I have my first case of body damage. The nice rubbery coating on the body has seemed to "chip off" in some spots, they are very small but that's how it starts lol one spot is on my speaker grill I now have a white spot there where I'm guessing a small piece of something sharp dug into the coating. Also on the side right above the volume rocker it also chipped and it was almost like something worked it way under coating and lifted it in a tiny spot so I had to scratch it off cuz I'm so anal lol just thought I'd let y'all know..I had a tpu case on it when both happened so I'm gonna say that something got into the case and did this damage.
Sent from my HTC One X+ using xda premium
Can you post a picture of it?
Will do as soon as I have a sec. Been running around like crazy today..
Sent from my HTC One X+ using xda premium
It isn't super noticable unless it's UR phone lol!
Sent from my HTC One X+ using xda premium
O and that little streak just above the speaker grill IS also one that will not come off..lol
Sent from my HTC One X+ using xda premium
So was your tpu case pretty loose, that you think something got inside? What have you tried to get rid of that streak?
Tpu case is pretty tight but not so tight that something couldn't get in especially with me being outdoors all the time and getting dirty and dusty lol but as far as the streak I realy haven't tried much other than a barly damp cloth and my finger lol not super worried about it just wanted to let everyone know I'll probly end up buying a new body when they come out with it on etradesupply.com they already have int. Version bit it doesn't have lte radio antenna sadly cuz I would love to have the red accents!!
Sent from my HTC One X+ using xda premium
About the body, was it you back in One X forums, who modded two different body pieces together?
Sure was
Sent from my HTC One X+ using xda premium
Black and white buttons lol its still rockin a white body with black buttons my girl is using it atm which reminds me I need to update her viper rom lol!
Sent from my HTC One X+ using xda premium
I didn't go into details, but was the whole body switching process too complex? Time wise and all alignments and cutouts matched?
Na all it took for me was one guitar pic. But I think most people recomend two or three all u do is wedge it in between the plastic body and the rest of the phone if u look at the sode of phone where the edge dips down is good place to start
Sent from my HTC One X+ using xda premium

Black HTC One quality issues?

I thought there was a thread on this but I haven't been able to find it. I was wondering if the black Htc one has the same gap gate issues as the silvers ones have had? I am getting a black one tonight and was just wondering what to expect. That ks guys.
Sent from the Pure HTC One using Tapatalk 4
Reserved. Just in case.
Sent from the Pure HTC One using Tapatalk 4
I cannot speak for everyone but mine is flawless. No gaps or dead pixels
Sent from my Black HTC One using xda premium
alphamale99 said:
I cannot speak for everyone but mine is flawless. No gaps or dead pixels
Sent from my Black HTC One using xda premium
Click to expand...
Click to collapse
Awesome that's great to hear. My current silver one is great but I had to go through two others to get it. Hoping I won't have the same problem with the black variant.
Sent from the Pure HTC One using Tapatalk 4
Pure+ said:
Awesome that's great to hear. My current silver one is great but I had to go through two others to get it. Hoping I won't have the same problem with the black variant.
Sent from the Pure HTC One using Tapatalk 4
Click to expand...
Click to collapse
Same for me, although the beats logo is already half rubbed off, and the very edge right in the middle if the side bezel has some slight wear (shows silver through it) which is likely where I grip the phone. Obviously I don't use a case so YMMV.
mminasian said:
Same for me, although the beats logo is already half rubbed off, and the very edge right in the middle if the side bezel has some slight wear (shows silver through it) which is likely where I grip the phone. Obviously I don't use a case so YMMV.
Click to expand...
Click to collapse
I have a poetic Atmosphere so I doubt I'll have that problem.
Sent from the Pure HTC One using Tapatalk 4
Got my Stealth Black One last night. Has zero flaws. Looks amazing. So much better than silver. Glad I bought it.
Sent from the Pure Ninja Black HTC One
I have a black HTC One and its flawless. No exchanges necessary either. I also have a clear skin I put on some I took it out the box. I highly recommend a skin
Sent from my HTC One using xda app-developers app
Put me down for being a happy black owner as well. Flawless, first thing i checked was gaps in the store and didn't spot any, came home ran the pixel test and not a single dead pixel. Whats most impressing is the finish, its almost scratch proof been without a case for a lil over a week and holding up real well.
Dropped my black in the sand face down and now have 2 tiny tiny silver dots by my front facing cam. This thing is so delicate. My Dbrands skin can't get here fast enough.
Sent from my HTC One using xda premium
its delicate to say the least

Red Accent fell off

Have any of you guys seen a site where i can buy new red "stickers" to go down the side of the dna? I dropped my phone down into my sleeper sofa and the rails for the mattress inside cut the sticker in half. Now i have one black side and one red side.... which is only cosmetic but it bothers me lol.
the red on the sides of mine looks like painted speaker grill. I Dont think its a sticker, but painted metal. Unless the newer models have stickers on them instead.
Sent from my HTC6435LVW using xda premium
Sticker, metal thing, I just want a new one lol
Sent from my HTC6435LVW using xda app-developers app
danielhall2689 said:
Sticker, metal thing, I just want a new one lol
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
http://www.etradesupply.com/reclaimed-htc-droid-dna-rear-housing-assembly.html
this is the only thing i've found unfortunately
[indiferenc] said:
http://www.etradesupply.com/reclaimed-htc-droid-dna-rear-housing-assembly.html
this is the only thing i've found unfortunately
Click to expand...
Click to collapse
I recently brought this because my camera lens was cracked. And yes the red side are only a sticker. It was a ***** to pop the back off with the popper tool but besides that its a perfect fit.
His: HTC DNA
Hers: LG Optimus G
d08speed3 said:
I recently brought this because my camera lens was cracked. And yes the red side are only a sticker. It was a ***** to pop the back off with the popper tool but besides that its a perfect fit.
His: HTC DNA
Hers: LG Optimus G
Click to expand...
Click to collapse
use a guitar pick. works like a charm, but they dont tell you that there is some really strong adhesive holding it on also.

Just "Did it myself" : replaced my own digitiser - tips inside

Hi ,
After i cracked my digitizer i tried to avoid from paying 300$ for fixing it.
I ordered "OEM HTC Droid DNA LCD Screen and Digitizer Assembly with Front Housing" - all the parts are already in one unit and factory glued (Digitizer, LCD and Front Housing)
Making the job less complex - no need to glue anything
btw
I did the order from http://www.etradesupply.com - very fast shipping and great service .
now few tips :
1. very hard to open the back cover of the phone in the first time ( it's glued to the loud speaker - need to be patient ).
2. there are 3 antenna cables : 1 of the wireless , and 2 of the camera flash i think - be very gentle to them, they are very sensitive.
3. Remember to remove the "Ear Speaker" from your old phone - it's not part of the new screen ( I forgot it and needed to reopen my phone )
4. Have fun !
If you have questions, i will more then happy to answer :good:
btw #2
If someone want my old parts (Cracked digitizer - fully working, fully working LCD screen and my old front housing - PM me , will discuss on good price to both of as.
Thanks for the post. I just cracked my screen last week and looking at different ways to fix it.
Does anyone know if they have this same part in white for sale anywhere? I want a white screen on my DNA but all I have been able to find are ones that don't come with the earpiece.
Saw on ebay.. but it without the housing..only digitzer and lcd
Sent from my HTC6435LVW using xda premium
Cool
Sent from my HTC6435LVW using xda premium
I bought the lcd and digitizer separate. Then realized I didn't have the adhesive to glue it all back together. Wish I went the whole front panel way..
Same here, I ended up buying the whole housing pre-assembled. Even when I third to glue it the slightest pull on the ribbon cable and part of the screen is unresponsive.
Sent from my HTC6435LVW using Tapatalk 4
Title is misleading ...digitizer only was never replaced ...
sent from my GE RED DNA \m/
munchy_cool said:
Title is misleading ...digitizer only was never replaced ...
sent from my GE RED DNA \m/
Click to expand...
Click to collapse
I'm getting my cracked screen fixed tomorrow at a local phone repair shop and they only ordered the digitizer... Ill see how it goes
Sent from my HTC6435LVW using xda premium
Just replace my screen with the HTC butterfly screen. Looks much better without the Verizon branding imo
Sent from my HTC6435LVW using xda app-developers app
I've got a cracked screen and was thinking about doing this... Wanted to ask how much experience (if any) you had doing this kinda stuff and also how long it took you. Also did you see any adverse effects (such as loose back, volume rocker, etc) from doing this?
Sent from my HTC6435LVW using Tapatalk 4
crookx said:
Just replace my screen with the HTC butterfly screen. Looks much better without the Verizon branding imo
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Post pics
Sent from my HTC6435LVW using xda premium
BigMace23 said:
I've got a cracked screen and was thinking about doing this... Wanted to ask how much experience (if any) you had doing this kinda stuff and also how long it took you. Also did you see any adverse effects (such as loose back, volume rocker, etc) from doing this?
Sent from my HTC6435LVW using Tapatalk 4
Click to expand...
Click to collapse
If you planning to buy the same part as i did, it's more easy.
Basic exp with tools suppose to be enough from my point of view.
Regarding the time, it's took me 2 hours - i had to open the phone again, cuz i forgot to place the ear speaker
For the adverse effects:
Back cover - not loose at all, it's connected with hhard plastic clips.
Volume rockers and power bottom - working as before.
One issue that i found, is the charging led, i forgot to takw it out from my old housing
Sent from my HTC6435LVW using xda premium
firespitta said:
Post pics
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Love how the red buttons match the rest of the phone.
Sent from my HTC6435LVW using xda app-developers app
crookx said:
Love how the red buttons match the rest of the phone.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
ThAts nice
Sent from my DROID RAZR using xda premium
---------- Post added at 07:52 AM ---------- Previous post was at 07:52 AM ----------
crookx said:
Love how the red buttons match the rest of the phone.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Where did u buy this?
Sent from my DROID RAZR using xda premium
Yes. I'd like to know too
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Hi
I got a white screen with red soft keys advertised for the 920e from eBay. Images here,
http://forum.xda-developers.com/showthread.php?p=44703091
I also agree the OP has a very misleading title for this post. It sounds like they are saying they separated their glass from the LCD and reused it. This is not the case. Not only did the OP replace the digitizer and the LCD but they also replaced the housing.
Great tips tho on removing parts.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Now I'm confused. I thought the digitizer was fused to the glass, but the LCD is a separate part. I see plenty of eBay listings for the glass+digitizer(with soft keys). You're saying if one were to buy that they'd have to glue it to the LCD? I'm skeptical that these 3rd party Chinese products actually use gorilla glass 2 and the same highly sensitive digitizer as HTC's, including the 5" 1080p LCD would make me even more nervous about quality.
thehoovie said:
Hi
I got a white screen with red soft keys advertised for the 920e from eBay. Images here,
http://forum.xda-developers.com/showthread.php?p=44703091
I also agree the OP has a very misleading title for this post. It sounds like they are saying they separated their glass from the LCD and reused it. This is not the case. Not only did the OP replace the digitizer and the LCD but they also replaced the housing.
Great tips tho on removing parts.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
http://item.mobileweb.ebay.com/viewitem?itemId=300894844116
Would be nice If you could use this too
Lol
Sent from my SCH-R970 using xda premium
i wanna buy charging cover, part 4,76$ but shipping 34,18$ how foolish...
drumz0rz said:
Now I'm confused. I thought the digitizer was fused to the glass, but the LCD is a separate part. I see plenty of eBay listings for the glass+digitizer(with soft keys). You're saying if one were to buy that they'd have to glue it to the LCD? I'm skeptical that these 3rd party Chinese products actually use gorilla glass 2 and the same highly sensitive digitizer as HTC's, including the 5" 1080p LCD would make me even more nervous about quality.
Click to expand...
Click to collapse
The LCD is a separate part, but I heard about how it is difficult separating the LCD from the glass. http://www.youtube.com/watch?feature=player_detailpage&v=fTqPqh0fNkQ#t=559 at 9 :17 starts to show the front coming off. When I did mine, as my glass was broken, there was no really saving the LCD.
I cant tell the difference between my replacement, from a USA seller, than the original LCD.
Zarboz said:
http://item.mobileweb.ebay.com/viewitem?itemId=300894844116
Would be nice If you could use this too ...
Click to expand...
Click to collapse
No doubt, but Can Not. That eBay listing has errors. It says the x920e in the listing but it can not be. That listing is for a back cover with an SD card. The x920d and the HTL21 have SD cards and a larger cut out on the top of the back cover. The x920e and the DNA have no cut outs are are a couple mms shorter than the other two. Now this one you can use. http://www.ebay.com/itm/290940405280

Categories

Resources