Alright, so I have been trying to root my Huawei Prism II with Android 4.1.1 for a while now, but whatever rooting program I use, it will keep getting stuck on Step #7. I also tried rooting the phone manually, but ran into a problem:
Code:
1|[email protected]:/data/local/tmp $ ./psneuter
./psneuter
Failed to set prot mask (Inappropriate ioctl for device)
For some reason my device will show up before I begin the process of rooting, seen below:
Code:
70723C61AA05 device
But when I check to see if the device is still there while in [email protected], it won't show any devices.
I am wondering if this has anything to do with not having the OEM driver for this phone? I've been looking all over the internet for the offical driver, but have not been able to find one for this device, so I have been using the one that was automatically installed by Windows 7 which is the Android Composite ADB Interface. Any help will be greatly appreciated!
That's my problem too. I hope that everything can solve really soon and we can root our huawei prism 2 devices
Sent from my Prism II using xda premium
I know already how to root the huawei prism II . Use Shuame a chinese version aplication for windows. Run the aplication, conect your device and in one click you will be root. This application install a Chinese superuser android app for root administration similar to SuperSU or Superuser.
Sent from my Prism II using xda premium
If that doesn't work, try this.....http://forum.xda-developers.com/showthread.php?t=2403230
LeVirus said:
Alright, so I have been trying to root my Huawei Prism II with Android 4.1.1 for a while now, but whatever rooting program I use, it will keep getting stuck on Step #7. I also tried rooting the phone manually, but ran into a problem:
Code:
1|[email protected]:/data/local/tmp $ ./psneuter
./psneuter
Failed to set prot mask (Inappropriate ioctl for device)
For some reason my device will show up before I begin the process of rooting, seen below:
Code:
70723C61AA05 device
But when I check to see if the device is still there while in [email protected], it won't show any devices.
I am wondering if this has anything to do with not having the OEM driver for this phone? I've been looking all over the internet for the offical driver, but have not been able to find one for this device, so I have been using the one that was automatically installed by Windows 7 which is the Android Composite ADB Interface. Any help will be greatly appreciated!
Click to expand...
Click to collapse
I understand that this thread is a couple of months old but I found an app that worked for rooting our Prism II phones. I used Kingo Android Root on my Huawei Prism II U8686 and it rooted without any problems. I was able to use titanium backup and some other root apps that I had on my old rooted Samsung T759. You can google search for Kingo Android Root to find it. Really easy to use, self explanatory. Screenshot for proof below.
Kingo works perfectly fine, you just need to install drivers. Make sure your bootloader is unlocked as well.
Follow this Guide here
http://forum.xda-developers.com/showthread.php?p=47921896
Related
i have got a chinese phone LongShengFa 820. i bought it from a seller in turkey.but there is no web site or document about this phone. i want to root this phone but i cant do something.
i tried unlockroot and it saysgetting root shell failed. or something like that
and the other rooting programs (like superoneclick z4root or doomlord):they just did nothing.not response.
what can i do about this phone.
İts usingandroid4,1.1 by the wayand i cansend proccessor
mkursadulusoy said:
i have got a chinese phone LongShengFa 820. i bought it from a seller in turkey.but there is no web site or document about this phone. i want to root this phone but i cant do something.
i tried unlockroot and it saysgetting root shell failed. or something like that
and the other rooting programs (like superoneclick z4root or doomlord):they just did nothing.not response.
what can i do about this phone.
Click to expand...
Click to collapse
you got it ADB driver ???
denisidze007 said:
you got it ADB driver ???
Click to expand...
Click to collapse
i have got it. when i plug it its shown as android adb interface or something like that on adb devices. but when i write adb devices on cmd.exe there is no any devices.
i finnaly found my phone what is. its smartphone 820(lumia 820 replica)
http://www.pandawill.com/802-smart-...4-10ghz-40-inch-50mp-camera-white-p72603.html
but i still cant find how to root it. its not shown when i write adb devices
mkursadulusoy said:
i have got it. when i plug it its shown as android adb interface or something like that on adb devices. but when i write adb devices on cmd.exe there is no any devices.
Click to expand...
Click to collapse
a problem in the absence of the adb device drivers
LongShengFa
look heare (delete spaces):
armtvtech. com/armtvtechforum/viewtopic.php?f=178&t=2073
I tried Kingoroot, Iroot, Vroot, Framaroot, Rootmaster and many other aplikacija.
None have worked.Kingoroot sees my phone as a TCL Device(5038x), but the real name is Alcatel OneTouch D5 (5038x). Does anyone know how to root this phone?
Do you have an impact if it's locked bootloader. and if so how it unlocks.
People are explaining how to root the most popular phones, but not the specific phones like i have.
pop31 said:
I tried Kingoroot, Iroot, Vroot, Framaroot, Rootmaster and many other aplikacija.
None have worked.Kingoroot sees my phone as a TCL Device(5038x), but the real name is Alcatel OneTouch D5 (5038x). Does anyone know how to root this phone?
Do you have an impact if it's locked bootloader. and if so how it unlocks.
People are explaining how to root the most popular phones, but not the specific phones like i have.
Click to expand...
Click to collapse
Can you run adb shell? If so, run "adb shell" in a dos terminal do the following:
#cd /system/
# cp build.prop /sdcard/
# exit
Click to expand...
Click to collapse
Then from the same dos terminal run "adb pull /sdcard/build.prop" ... (make sure your current location e.g. c:\users\blablah\yadayada)
Then use windows explorer to navigate to where the build.prop was saved to view its contents (you should be able to open it using notepad or wordpad) ... report back the values for the following:
ro.build.version.release
ro.product.board
ro.board.platform
If it's MSM8212, 4.4.2 and MSM8610 you're pretty much out of luck...
And yes Alcatel bootloader for Qualcom (e.g. MSM8212) devices has thus far not been 'hacked' if you know what I mean.
This is how I managed to root
Maybe someone will help.
1.Instalirao'm on the computer Android SDK tools.
2.Onda Android ADB, Fastboot and other tools.
3.Instal Java developer kit 8u25.
I installed on their computers VRoot v.1.7.9.
I joined the phone, waited to recognize him and started Root.
My phone is rebooted, and asked to install VRoot and on the phone, which I did.
I started VRoot and on the phone, and so alternately I managed to root the phone.
Then I installed and started supers.
cant root
pop31 said:
Maybe someone will help.
1.Instalirao'm on the computer Android SDK tools.
2.Onda Android ADB, Fastboot and other tools.
3.Instal Java developer kit 8u25.
I installed on their computers VRoot v.1.7.9.
I joined the phone, waited to recognize him and started Root.
My phone is rebooted, and asked to install VRoot and on the phone, which I did.
I started VRoot and on the phone, and so alternately I managed to root the phone.
Then I installed and started supers.
Click to expand...
Click to collapse
Im not very good in this rooting process and i ve tried to root my alcatel d5 with vroot and framaroot and doesnt work
if u could me explaind a bit easier what i have to do? i would be graetfull thks and sorry for bad english
about DOS mode...
can somebody help me how to install dos on windows 10 pro technical preview, evaluation copy : 10041...or maybe help me root alcatel 5038x without dos. i would be grateful
toniternova said:
can somebody help me how to install dos on windows 10 pro technical preview, evaluation copy : 10041...or maybe help me root alcatel 5038x without dos. i would be grateful
Click to expand...
Click to collapse
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
blazeaster said:
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
Click to expand...
Click to collapse
Nope, cannot on pop D5 5038A
gl3nborj said:
Nope, cannot on pop D5 5038A
Click to expand...
Click to collapse
Looks like theres a major diference between 5038x and 5038a. I flashed my boot image with image for 5038a, and now its bricked!
These two mobiles are not compatible obviously.
NOTE TO EVERYONE:DONT FLASH ALCATEL POP D5 IF YOU ARENT ABSOLUTELY SURE THAT IMAGES/ROMS ARENT SPECIFIC FOR YOUR MODEL. IF YOU ARENT SURE WHAT IS YOUR MODEL ID, CHECK UNDER THE BATTERY
blazeaster said:
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
Click to expand...
Click to collapse
I tried mobo genie method and it starts one click to root after launching it (saw it in task manager) but it didn't root it.
I've also tried downloading one click root from official site and was without results.
The tool that worked for me was Shaume (shuame.com/en/root/).
It's a chinese based website which is probably one of the reasons.
After rooting it installed King User (basically SuperSU) and Cleaner Master.
PS: It might say that it failed to root but it worked.
Using POP D5 5038X.
BiscuitEdi said:
I tried mobo genie method and it starts one click to root after launching it (saw it in task manager) but it didn't root it.
I've also tried downloading one click root from official site and was without results.
The tool that worked for me was Shaume (shuame.com/en/root/).
It's a chinese based website which is probably one of the reasons.
After rooting it installed King User (basically SuperSU) and Cleaner Master.
PS: It might say that it failed to root but it worked.
Using POP D5 5038X.
Click to expand...
Click to collapse
Can you post some screenshots or any alternative methods of rooting? I am trying on 3 different PCs to root my 5038x with RootGenius but still with no luck :/
5038a Roms
any cyanogenmod 12.1 rom for alcatel one touch pop d5 5038a
Phone problems
I tried to install the latest version of software on alcatel pop d5 5038x(that one that appears when new software is available).Now my phone is stucked on boot menu. I tried the methods shown on interner but nothing works. I formated the phone it doesnt work. When I try to install software from pc it ways " There is no greater software version available to upgrade your phone,actual version on your phone is the latest". Can someone help me? When I turn on my phone enters boot menu and I tried everything and I cant access to the phone. Help me pleaseee
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Sicnarf26 said:
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Click to expand...
Click to collapse
See the instructions (author has since updated) at
http://click.xda-developers.com/api...Touch Pop S3</b> 5050 | Every Android version
and the second page comments for recovery hints. TWRP requires some study and preparation before use so it's not good to be stuck when attempting recovery.
Note the comment on the 3rd page about the updated recovery image that lets you see what you are doing on the screen. For me I got it working, working in the dark (ie. not seeing anything on screen), so it's too early for a video tutorial.
Please Help me :/
When i use the .cmd, i put /storage/sdcard0 or /storage/sdcard1
I have a message :
''The specified path was not found''
Rooting using Kingo Root
Rooting nowadays is very simple.
But the easiest way to do it is the following:
1. Download Kingo Root for Windows, Mac or Linux;
2. Install Kingo Root;
3. Open the program;
4. Connect your phone to your pc through USB cable and wait for Kingo Root recognize it;
5. If your phone is rootable it will appear a button saying "ROOT", click there (If your device is not rootable then you are out of luck and you must try another method)
6. Don't remove your phone and don't click anywhere, wait until the rooting process is finished;
7. After this your phone should reboot, it means you are now rooted (If your phone did'nt rebooted, manually reboot it then);
8. Enjoy!
Note: Rooting will void the device's warranty, root at your own risk.
Download the phone's drivers if needed and disable Windows, Mac or Linux firewall if needed.
Hope it works for you!
Link for Kingo Root: kingoapp.com
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Finally got it rooted with KingRoot
Just noticed that the build.prop has the ro.build.id-LMY47V
That's the 5.1.1 for the 2013 Nexus 7
OldMansGhost said:
Finally got it rooted with KingRoot
Click to expand...
Click to collapse
Hi I would to know how you rooted the Coolpad Rogue 3320A. I was looking at Kingo root and KingRoot and they dont give good instructions.
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.
The version of Windows KingRoot I had success with was KingRootSetup_v3.1.0.1125_105002.exe downloaded from kingroot.net
There's a setting in the developer options to allow the bootloader to be unlocked. I've not tried to fastboot to work yet.
"Vanilla" ROM or at least vanilla dialer/phone apps?
I'm interested in some kind of vanilla dialer/phone/telecom app set (5.1.1 based) or a full ROM that's AOSP so that I can toss out T-Mo's "Wi-Fi Calling" and use the built-in Android SIP client with its normal configuration screens.
If anyone has accomplished the same with this device or any other T-Mo 5.1 based device, please let me know. I'd really like to be able to configure the system dialer to connect to my SIP PBX directly rather than use a half dozen hacks to give me half-working VoIP calling of my own.
(Note: If there's a T-Mo 4.4 based image out there, that would suffice, as I can at least make VoIP apps intercept dial requests, which T-Mo Wi-Fi Calling prevents on 5.1. This device shipped with 5.1, but it might be possible that a similar model's ROM image might work on this as well.)
/system image
anyone with a rooted 3320a that might be able to provide me with a stock(or rooted stock) image of /system? i managed to softbrick my device after rooting and i forgot to do a dd of the system partition before mucking around in it
thanks in advance
Root Genius Might Work
venuspcs said:
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Click to expand...
Click to collapse
My Arise don't have a custom recovery either. This kind of disappoints me, as this phone is a good phone for the price.
However, I thought I'd share with you guys that Root Genius may also work to root the Rogue as it does root my Arise. (I don't own a Rogue, so I can't confirm this.) It's always better to have more than one way to root your phone safely right?
Kingroot
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.[/Q UOTE] I opens kingroot in my browser and used it for translation
Click to expand...
Click to collapse
hi guys,i av rooted coolpad 3320a with kingroot windows version but when i try to unlock with sigma box it says root the phone first. Anyone with a solution pliz help. Thanks in advance
KingRoot (Android version) worked for me
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
myoshinaga said:
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
So what is the final verdict?
Click to expand...
Click to collapse
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
got it working with kingo root, but only after kingroot said it worked. otherwise kingo root kept freezing. havent been able to get supersu installed but kingo root works just fine
I was able to root the coolpad rouge without a computer. I'm going to create an account and upload the tut. -cyphermil
myoshinaga said:
So what is the final verdict?
Click to expand...
Click to collapse
You CAN root this with the Kingroot apk.
I'm new and can't post links so to make the links below work just abbrev the http and add a colon.
As soon as I can post links I will fix them.
PROOF:
Hypertexttransferprotocol//imgur.com/a/SXmMc
Here's what I did:
1) download latest kingroot Hypertexttransferprotocol//androidmtk.com/download-kingroot-application
2) enable USB debugging in developer options
3) enable OEM boot loader unlock in developer options
6) enable unsigned APKs
7) install kingroot apk
8) run kingroot
9)?
10) PROFIT
Will update with better details later. Sorry for mistakes and formatting I'm on my rooted coolpad rouge.
Kotetsukun said:
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
Click to expand...
Click to collapse
Busybox is safe to install. Will post screenshots when I am able to include links
Never mind. I am happily satisfied anyways. Thank you.
Coolpad Rouge 3320A
So im am writing this post via on my mac...
So i want to root my phone but when i tried to install king root i got to 90 percent then the app closes its self and disables my wifi unless i reboot my phone.
im just need to root my phone for to install xposed framework and installer
~Ninja, Aug/13/16
I just purchased the Alcatel OneTouch Pop 7 LTE (9015W) from T-Mobile and I was wondering if there is a method for obtaining the boot.img and the recovery.img so that a custom recovery and root can be created. I looked at this guide (http://forum.xda-developers.com/showthread.php?t=1801690) and it mentioned that I needed root in order to get those two. Is there a temporary root method I could use so I can obtain those img files? It is running Android 6.0.1 if that is an issue or not. The stock recovery information is listed as:
Code:
TCL/9015W/Pixi4-7_4G_TMO
6.0.1/MMB29M/vBC3-0
user/release-keys
in the same boat
Like the original poster i have the same device and tried every (literally) way to try and root this device with no success at all.
If anyone has the key I would be in your debt.
I did come across recovery and stock rom and worried because they are one year old. BUT, I am ready to try anything.
Same here. I'm trying to use this tablet for my cars dash, i figured it'd be sick for all my car functions to be in a tablet with LTE. But most of the cool functions need the device to be rooted. Desperately trying to figure this out.
Same
I have the same one, been trying to find a rom whether its rooted or not, or custom, its stuck in a boot loop, i can get it power off and get into recovery, but factory reset is a no go. If i had an image i can flash it and pray i can salvage it.
Yes it'll be nice to be able to make this tablet useful, use internal micro SD as ram, remove google bloat ware and sightly over clock.
Got this device for free but if I can't root it then it might become a Christmas gift. LOL
Sent from my ALCATEL ONETOUCH POP 7 LTE using Tapatalk
Temporary root method
Shentok said:
I just purchased the Alcatel OneTouch Pop 7 LTE (9015W) from T-Mobile and I was wondering if there is a method for obtaining the boot.img and the recovery.img so that a custom recovery and root can be created. I looked at this guide (http://forum.xda-developers.com/showthread.php?t=1801690) and it mentioned that I needed root in order to get those two. Is there a temporary root method I could use so I can obtain those img files? It is running Android 6.0.1 if that is an issue or not. The stock recovery information is listed as:
Code:
TCL/9015W/Pixi4-7_4G_TMO
6.0.1/MMB29M/vBC3-0
user/release-keys
Click to expand...
Click to collapse
Hi.. In the same boat as you.. There is a temporary root method for 6.0.1. Install the latest kingroot on your pc and on the 7 lte. First try to root it from your pc( it will not be able to root it) then use the kingroot on your tab. Voila you have your temporary root. You might have to try it more than once. I personally use it for adaway for changing the hosts file and the root goes away if I restart the tab.
Best of luck man hope you can get us that permanent root and custom recovery!
Possible temporary rooting method found!
Shentok said:
I just purchased the Alcatel OneTouch Pop 7 LTE (9015W) from T-Mobile and I was wondering if there is a method for obtaining the boot.img and the recovery.img so that a custom recovery and root can be created. I looked at this guide (http://forum.xda-developers.com/showthread.php?t=1801690) and it mentioned that I needed root in order to get those two. Is there a temporary root method I could use so I can obtain those img files? It is running Android 6.0.1 if that is an issue or not. The stock recovery information is listed as:
Code:
TCL/9015W/Pixi4-7_4G_TMO
6.0.1/MMB29M/vBC3-0
user/release-keys
Click to expand...
Click to collapse
I may have found a simple way to achieve at least temporary root. By accident really lol...
I was playing around with hidden menus and found an app available on the Play store called "Hidden Menus"
https://play.google.com/store/apps/details?id=org.freespirit.hms&hl=en
For tablet users, this is a perfect way to access some of androids secret menus typically only accessible through a dialer. As tablets generally have the dialer excluded from their systems, this is an awesome workaround.
On the Pop 7 Tablet (9015W/9015B) there will be a selection near the top of the list labeled "com.jrdcom.user2root"
and its selection will show .User2RootReceiver. Click this and then press yes when asked if you are sure if you want to run it.
running this option will bring you to another screen that will have "com.jrdcom.user2root.JrdUser2Root" at the top and then underneath will have two buttons labeled "Root" and "User". These two buttons will change your default user for ADB.
If you press "Root" you will see a message flash at the bottom of the screen that says "Update to Root Success"
Thats it!
Plug your Alcatel Pop 7 Tablet (9015W/9015B) into your computer with your usb cable (Make sure to enable USB Debugging mode first! If you don't know how, just search Enable USB Debugging on xda. Enabling this feature is beyond the scope of my post for today.
Open command prompt and type "adb shell" (Without quotes of course)
you should see the prompt change to something like the following for example:
Code:
[email protected]_4G_Telus:/ #
All Done!
Just be aware that rebooting the device seems to force it to default back to user mode. If you see this:
Code:
[email protected]_4G_Telus:/ $
then you are in user mode.
Hope this helps!
The user2root tool doesn't seem available on my T-Mobile branded version of this device.
Amazing!!! Worked for me too
Alcatel Pop7 LTE 9015B from Virgin canada (Bell)
Not a permanent root, but at least I was able to get rid of facebook bloat (com.facebook.appmanager, com.facebook.system)
These packages were impossible to deactivate and were using background data