Hi My phone can not get no service... I flashed it with froyo from america and since that my samsung i5500 can't get registered within my network providers (three.co.uk) i realised that when I go to service mode settings and chose band I cant tick on wcdma 2100 (on that band my phone was working perfectly) instead I can go for 1900. Is there any solution?
I think i need to reset the service mode settings.
Is that somehow possible?
I already reflashed it with other various roms. No positive results.
Is there anyway to wipe all data of the phone? no soft/hard reset (done it many times)
Format of system disks? then install the system on dead device?
I flashed the phone aswell with cyagoned rom and different various basebands and no result. please help me.
When you flash all the roms did you wipe data factory and cache partition ?
Sent from my GT-I5500L using Tapatalk
I went through and read everything in the Super Thread - twice.
I went through and flashed the stock Rogers ICS 4.0.4 rom to the phone and then rooted it by flashing the cwm kernal in the instructions. My phone is successfully rooted and it is not reverting to the stock android recovery.
I went through and disabled all the Rogers bloatware and restarted the phone and now it isn't enabling itself automatically. Score one for patience and good advice.
I use Petro Canada Mobility pay as you go. They are a reseller of Rogers and the price is right until my ISP launches their wireless service.
I went through and set the phone so that is uses gsm/wcdma bands only - no LTE as it isn't available in my province as of yet. I set up Petro Canada's APN settings and save. I restart the phone and the phone automatically defaults back to Rogers APN settings. The APN that I created is gone - *poof* I can't count how many times in the last 24 hours I have reset this phone
What the heck am I missing here cause I can't figure it out. Why won't it save my APN settings? I got the rest of the kinks worked out and now this??
Do the Bell and Telus versions of this phone have the same quirks cause if they don't, I'll gladly flash their roms.
Help please!
I would leave the network to auto.
When you make an APN and save it, then select it, it disappears?
Can you edit the default Rogers APN?
Is your phone carrier unlocked?
rangercaptain said:
I would leave the network to auto.
When you make an APN and save it, then select it, it disappears?
Can you edit the default Rogers APN?
Is your phone carrier unlocked?
Click to expand...
Click to collapse
When I make an APN and and save it, it is fine until I restart the phone. The minute I restart the APN disappears. I can edit the Rogers APN and save the changes. When I restart, it reverts to it's default settings. It is not carrier unlocked. Because my mobility carrier is a reseller of Rogers, my sim card works with it. There was no need to unlock it.
It seems like you need to unlock it, because you can't use any other carrier's APN, you're locked on Rogers.
Have you rooted it? Since that is the cheaper route, maybe being rooted will let you permanently create the correct APN.
Yes I have it rooted. Still the same issue.
Run a good nandroid backup ....
Then enter the new APN into the device ....
Then delete the old APN , then reboot ...
If the new APN sticks, then run a new backup and delete the old one ...
These devices can be temperamental on occasion ....g
Edit :
And yes ...you may be locked at this point, and stuck on Rogers ...g
I went through and unlocked the phone, stuck in a Bell Sim card and it recognized it right away. I went through completely reset the phone again, entered in my APN settings, and restarted. The settings disappeared. I am told that the Bell, Rogers, and Telus variants are all the same so I am going to flash one of their roms on the phone to see if I have better luck.
Well I flashed a different rom - Bell and that fixed the issue. It was the stock rogers rom that was causing me grief.
So my next question is this - anyone have any ideas on what Rom is better? The Telus or the Bell one?
hey on my galaxy s3 i9300 Australian version. im with optus and was wondering if any 1 new how to fix the no data connection issue. i looked it up and people say its to do with the apn. so i have reset apn to default and it helped but now its back to no data. i reinstalled the stock firmware for it and it went good again for a lil bit but now the data is back to not working. the problem seems to be appearing on a few forums but i havent found a fix. my wifi and calling and texting works fine.
Contact your network provider, if you have the latest stock rom and modem installed for your country then only the apn settings need to be checked. You might possibly need a new SIM, but it's more likely to be the apn settings are wrong.
.....Also note if you have been Rom swapping make sure you keep Australian modem version as they are optimized for your frequencies, you should find them in the modem thread
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Change the rom
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
I did the same thing by my mistake.And my le max 2 also became not able to connect internet. In my case, it can't connect both 4G and 3G .
But I fixed it. But I don't know that it get back to the original completely.
I'm japanese.And I'm sorry for that my English skil is very poor.
My current rom is Le2_X820-MAX_ROW-5.8.015S_V29_CUOCO92.
I used DFS CDMA TOOL and checked the items on the "Band Preferred" same as "RF BC Config".
1. download HTC Diag Driver. You have to customize .inf file later.
2. conect device to your windows pc and choose MTP and USB Debugging.
3. enter the follows command.
"adb shell"
"su"
"setprop sys.usb.config diag,adb"
When you enter this command, your device change over diag mode.
4. diag driver install.
You have to find hardwawer ID from device manager.
And replace the hardware ID in .inf file.
5. If you install diag driver correctly, you will be able to use DFS CDMA TOOL.
sorry, I can't explain any more..English is difficult...
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Ootp said:
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
Click to expand...
Click to collapse
Many thanks for the advice but it didn't help. I had installed the indian rom and then to the chinese without any change in the behavior of the modem. I'll try the chatmonchy's advice to see if there will be any improvement.
xterminater07 said:
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Click to expand...
Click to collapse
Actually I'm in Europe and looks like we use slightly different bands (??). I get 4G data but without calls. To other networks like 2G and 3G it connects sometimes but it's for few seconds only. I even don't remember what made me change the bands to USA, I guess I was curios what settings those were. The options are "USA band" and "Band 6", neither one is working well for my device. And strangely though, there is no other option to go back like "Auto" or something. It seems that I'm not the only one that did it. After a google search, it turned out that a lot of people had the same issue. For some, the factory reset helped, for others was flashing via TWRP the radio bands again.
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
valy_cta said:
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
Click to expand...
Click to collapse
That's good!!
I'm looking forward to your guide about unlock additional bands.
thread: [SOLVED] Accidentally changed the Radio Band to USA
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
readion said:
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
Click to expand...
Click to collapse
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
karellang said:
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Click to expand...
Click to collapse
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
Does not help. If I go to servise menu (dial *#*#4636#*#*) , I see Radio turned OFF and I can´t change it. How to solve this ?
Did you post any guide how you solved the issue?
Unfortunately USA band selected
Hi,
I live in India. I bought Oppo F3 Plus (CPH1613) 4Gb Ram, 64GB Storage, Qualcomm MSM8976 Pro Snapdragon 653 a year ago and was working too much fine. I was wondering about Qualcomm mobile secret codes and found this *#*#4636#*#* . I dialed this and accidentally changed radio band to USA band and suddnly on instant my mobile didn't get any network signal. From then, I went for Oppo care, and mobile repairing shops and self tried and tested for lots of time; but everyone unable to bring phone to normal. I reset my mobile, flashed stock rom for countless times, wiped all data but nothing helped me out. Finally i rooted my oppo f3 plus and tried to boot in fastboot mode; but Oppo removed bootloader and fastboot mode from 2016 (as posted in XDA). I got a little link about resetting USA band to automate and is erasing modemst1 and modemst2. But again it have to be performed from fastboot.
Help me out for my mobile.
You can flash a modem file, it will reset it as well. Changing the ROM won't update the modem configuration. Try to search modem files and flash them via TWRP.
Hi, I downloaded and installed Lineage ROM, everything was working fine but I found that I was not able to send text messages (receiving messages was okay), I tried change values under test menu (*#*#4636#*#*) but problem persist.
I tried clean installation of new ROM (Aosp).
I tried install new firmware from:
https://forum.xda-developers.com/re.../firmware-xiaomi-redmi-note-5-5-plus-t3759683
And baseband from :
https://androidfilehost.com/?fid=746163614322262750
And finally, text messages are OK, unfortunately I am not able connect to 4G/ LTE networks now. Only 2G and 3G networks are working. LTE services were working without problem on original Miui and Lineage ROM.
Can someone try help me how solve it ? I would really appreciate any ideas.
Do you think this can help?
https://androidfilebox.com/app/redmi-5-plus-modem-firmware/
Thanks in advance and happy weekend
i have the same question! +1
I tried fresh install original MIUI ROM, but it did not help
http://en.miui.com/getrom-340.html?m=yes&mobile=2 .
LTE is not available still.
I did not try this method still: https://androidfilebox.com/app/redmi-5-plus-modem-firmware/
But I don't have another option I guess.
With LTE no Problems = https://forum.xda-developers.com/redmi-note-5/development/rom-omnirom-t3823189
Unfortunately LTE is not working on this ROM (Omni) for me too, but I expected it, because as I wrote I tried original MIUI as well. It's problem of wrong firmware, baseband, modem or something, because hard reset or flashing new rom don't fix it. Btw, this morning I was in big city in my country and my phone was able connect to LTE, but it was 1800 or 2100 MHz, which are available only in bigger cities. When I came back to home, it showing only H+ again. It seems my phone is not able to connect only to LTE on 800 MHz (B20) currently, which is most widespread LTE frequency in my country and this one is only available one in my location. And I was able connect to this network before. Unfortunately I don't know how I can bring it back.
Solved.
My friend share her .xqcn file with me (she has same phone) so I flashed modem file via QPST Flash Tool to my device. Xiaomi started receiving LTE in my location- B20 frequency band, unfortunatelly it was continuously connecting and disconnecting between "no signal" and 4G.
The next step was flash MIUI 10 Global Beta ROM 8.8.9 to my phone via Miflash. LTE seems be stable and fully working now.