[Q] Xperia P Rom Flashing Problem - Sony Xperia P, U, Sola, Go

I am trying to update my Xperia P via Flashing the New update .100 but When i Connect my phone In Flashmode,green LED shows up for only 45 seconds and then Phone goes to Charging.
Flashmode was working properly when i flashed .400 in my phone but Then i Rooted 6.2.A.0.400 via this thread http://forum.xda-developers.com/showthread.php?t=2249077
After this my phone is showing problem in loading the flashmode
I have tried a number of things but em unable to solve the mystery.
so please help me out!!

@saudmughal
45 seconds is about the time phone will stay in flash mode when not flashing, before it will change to charging.
Only connect the phone when asked to by flash tool.
Whait a bit before connecting in flash mode, or press volume up + power untill you feel 3 vibrations to make sure it's off.

i have the same problem in my device xperia sola :\ :crying:

ChikeD said:
@saudmughal
45 seconds is about the time phone will stay in flash mode when not flashing, before it will change to charging.
Only connect the phone when asked to by flash tool.
Whait a bit before connecting in flash mode, or press volume up + power untill you feel 3 vibrations to make sure it's off.
Click to expand...
Click to collapse
So you mean to say that 45 seconds is normal & I should take the risk of flashing the phone?
wat if the phone gets bricked?

saudmughal said:
So you mean to say that 45 seconds is normal & I should take the risk of flashing the phone?
wat if the phone gets bricked?
Click to expand...
Click to collapse
Yes, my phone go out flash mode after 45 or 50 seconds, I don't remember exactly but I timed it before, if it's not being flashed.
Flash at your own risk I am not telling you to do anything.

Related

xperia x10a not boot or power on, just continuously vibrating.

hi!! my xperia x10a not boot or power on after flashing. the battery charge was poor during flashing and now the phone doesn't boot up, when i push the power key the phone vibrate but no power on and then the phone vibrate continuosly.
i charged the battery and refhlasing the phone using flashtool but nothing at all.
what can i do?
need help please!!
What did you flash to it exactly? Try flashing the original firmware.
i flashed the phone because when i update from 1.6 to 2.1 the phone restarted it self everytime! i need to get an externar charger to charge the battery before reflashing to the original firmware.
Flash back a 2.1 or 2.3.3 firmware, see if it helps, if it is atleast coming on a bit, do a repair via SE. Do check the files you're using and make sure they're legit before flashing them to your phone.
jowade1202 said:
hi!! my xperia x10a not boot or power on after flashing. the battery charge was poor during flashing and now the phone doesn't boot up, when i push the power key the phone vibrate but no power on and then the phone vibrate continuosly.
i charged the battery and refhlasing the phone using flashtool but nothing at all.
what can i do?
need help please!!
Click to expand...
Click to collapse
I had the same problem.
Infact what I found is that charging itself need the firmware to be properly installed.
You have 2 ways to fix the problem.
First is that find a frnd who have an x10 and put ur phone battery into his and charge it for sometime.
Second is open flashtool, remove battery from ur phone, then connect the USB cable to PC and ur phone, and then press the back button and hold it and then insert the battery.
U will see the green light (means the phone is in flash mode) and also ur flashtool should be detecting the phone.
Now keep the phone like that for atleast 30 mins.
When phone is in flash mode, it actually charges the battery. (thats what I did).
After atleast 30 mins, remove the phone and check if its switching on.
All the best,
Also, while ur flashing a new ROM, always make sure that u wipe ur battery stats...
i charged the battery and flash the phone with flashtool to 2.1 and 2.3.3 but still the same problem.
by the way, the green light power on even without hold the back button, is like always be in flash mode.
+1
i got the same problem as you. When i press on/off button, it vibrates and green led flashes once, but then nothing more happends.
I tried to put in it flash mode, but it bootloops when i do that.
this is exact my phone problem, but i can't find any solution!
do you have any sugestion?

[Q]Can't boot xperia x10 mini pro in flash mode and can't back it to stock ROM

Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol

[Xperia U] boot loop/soft brick

While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I donĀ“t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom

[Q] Xperia U.

Hello. I`m new here to xda-dev and i kinda need you help. I have a sony xperia u device, and today i tried to get its factory settings back. It restarted normally, but then it blocked. I waited several minutes and nothing happend. I removed the battery and tried to reopen it. It showed me Sony logo, Xperia, then blank screen, and restarted again. It keeps doing that, without opening for good. I tried to repair it with sony companion, but i cant get it connected due the fact it still restarting and keep disconecting from pc. What shall i do?
(sorry for my poor english)
narciseduard said:
Hello. I`m new here to xda-dev and i kinda need you help. I have a sony xperia u device, and today i tried to get its factory settings back. It restarted normally, but then it blocked. I waited several minutes and nothing happend. I removed the battery and tried to reopen it. It showed me Sony logo, Xperia, then blank screen, and restarted again. It keeps doing that, without opening for good. I tried to repair it with sony companion, but i cant get it connected due the fact it still restarting and keep disconecting from pc. What shall i do?
(sorry for my poor english)
Click to expand...
Click to collapse
When you connect it in fastboot mode it disconnect?
Angristan said:
When you connect it in fastboot mode it disconnect?
Click to expand...
Click to collapse
You mean lock button and -vol ?
EDIT: I connected again my phone to pc, and tried to open it with vol+ and same problem happend, still restarting without go on for good.
Not even opening fastboot.
narciseduard said:
Not even opening fastboot.
Click to expand...
Click to collapse
Just flash official ftf back with vol down. No need to press power button when you're booting to flash mode or fastboot mode. Just press vol + (fastboot) or vol - (flash) and plug in USB.
Sent from my ST25i using Tapatalk 2
narciseduard said:
Not even opening fastboot.
Click to expand...
Click to collapse
I did that, it flashed a green light for few secs, and then it went charging. No menu opened.
I can hear the sounds from my laptop when i try to conect it, to view that menu, but it disconects after a few seconds.
narciseduard said:
I can hear the sounds from my laptop when i try to conect it, to view that menu, but it disconects after a few seconds.
Click to expand...
Click to collapse
Did you install flashmode driver from flashtool\drivers directoty?
What windows version you have?
install proper drivers for your window and to stop the bootloop hold power button and volume up key it will vibrate once then will vibrate thric again and it will poweroff your device
I finnaly managed to to conect my phone to pc, but emma tells me that my phone is locked and i dont know how to unlock it, because it can turn on. What i do now? :l
narciseduard said:
I finnaly managed to to conect my phone to pc, but emma tells me that my phone is locked and i dont know how to unlock it, because it can turn on. What i do now? :l
Click to expand...
Click to collapse
What is it that you want to do?
Flashing the formware does not require unlocking the phoen.
Which lock is it SIM or bootloader?
ChikeD said:
What is it that you want to do?
Flashing the formware does not require unlocking the phoen.
Which lock is it SIM or bootloader?
Click to expand...
Click to collapse
It said that SIM is blocked. And my problem is in the 1st post. My doesnt come up anymore. It just shows me Soy and Xperia logo, then switch off, and keeps doing that, without going on for good.
narciseduard said:
It said that SIM is blocked. And my problem is in the 1st post. My doesnt come up anymore. It just shows me Soy and Xperia logo, then switch off, and keeps doing that, without going on for good.
Click to expand...
Click to collapse
First shut it down, press power + volume down until you feel 3 vibrations (about 10 seconds)m if not take out the battery for a minute.
Download flashtool install and open it and connect in flash mode. It's wither volume down and connecting to pc or colume down, I am not sure about XU. If it shows it's connecting in flash mode and stay in this mode for about 45 seconds you can repair with PC Companion or flash with SUS
ChikeD said:
First shut it down, press power + volume down until you feel 3 vibrations (about 10 seconds)m if not take out the battery for a minute.
Download flashtool install and open it and connect in flash mode. It's wither volume down and connecting to pc or colume down, I am not sure about XU. If it shows it's connecting in flash mode and stay in this mode for about 45 seconds you can repair with PC Companion or flash with SUS
Click to expand...
Click to collapse
I dont have to shut it on cuz it aint go on lol. It stays on on flash mod, but when i open sony companion to fix it, it tells me to remove the batter and put it back. But if i dont open it in flash mode, it never comes up, and its connecting and disconnecting from pc in 5 secs.
narciseduard said:
I dont have to shut it on cuz it aint go on lol. It stays on on flash mod, but when i open sony companion to fix it, it tells me to remove the batter and put it back. But if i dont open it in flash mode, it never comes up, and its connecting and disconnecting from pc in 5 secs.
Click to expand...
Click to collapse
You wan't to fix it or not? it's on boot loop not shut off, shut it off.
ChikeD said:
You wan't to fix it or not? it's on boot loop not shut off, shut it off.
Click to expand...
Click to collapse
I think i finnaly managed to fix it. I downloaded SUS and fallowed the steps. Now i`m waiting for the phone to come up.
Meanwhile.
It works !!!! Thank you so much for your help, i cant say how much i`m greatful to you! Thank you ! So it worked with SUS. Thanks everyone for your time and help !

[Q] Help Plz my Xperia P Hard bricked.(It only shows red LED for a couple of seconds)

I have a hard bricked Sony Xperia P.i flashed a custom rom for it but there are some bugs on it(when it booted up it stucks in lock screen and onceagain restarting. )so i off my phn by pressing keys while it restarting,.another bad thing is there it has 20% of battry persantage ..opz after i off it ,my phone never boot up. It only shows red LED for a couple of seconds when connected to external charger or USB port.
No entry into fastboot or flash mode.im on unlocked boot loader...plzzz help me im in a serious problem now...plzzz:crying::crying:
(sorry for my bad english)
Nipunupekshana1 said:
I have a hard bricked Sony Xperia P.i flashed a custom rom for it but there are some bugs on it(when it booted up it stucks in lock screen and onceagain restarting. )so i off my phn by pressing keys while it restarting,.another bad thing is there it has 20% of battry persantage ..opz after i off it ,my phone never boot up. It only shows red LED for a couple of seconds when connected to external charger or USB port.
No entry into fastboot or flash mode.im on unlocked boot loader...plzzz help me im in a serious problem now...plzzz:crying::crying:
(sorry for my bad english)
Click to expand...
Click to collapse
First of all make sure the phone is off, press power + volume up untill you feel 1+3 vibrations(sometime 1+1+3).
See if you can charge it, though charging led may not turn on, leave it on charger for an hour or two, then force it off again and try fastboot again.
ChikeD said:
First of all make sure the phone is off, press power + volume up untill you feel 1+3 vibrations(sometime 1+1+3).
See if you can charge it, though charging led may not turn on, leave it on charger for an hour or two, then force it off again and try fastboot again.
Click to expand...
Click to collapse
Had this same issue while using a custom ROM , resolved by using SUS . Connect your phone to computer and let it charge first for an hour , then open SUS and follow the instruction .
6598855 1076
sanjithxp92 said:
Had this same issue while using a custom ROM , resolved by using SUS . Connect your phone to computer and let it charge first for an hour , then open SUS and follow the instruction .
Click to expand...
Click to collapse
Thankz for helping frdz but im on unlocked bootloader i think so i can't use sus ...
2859242 5984
ChikeD said:
First of all make sure the phone is off, press power + volume up untill you feel 1+3 vibrations(sometime 1+1+3).
See if you can charge it, though charging led may not turn on, leave it on charger for an hour or two, then force it off again and try fastboot again.
Click to expand...
Click to collapse
but i cant see any vibrations on my phn by pressing keys when it connect to my sony wall charger only appering red led for a 1 sec then no other resultz ..thnakz for helping bro...
Nipunupekshana1 said:
but i cant see any vibrations on my phn by pressing keys when it connect to my sony wall charger only appering red led for a 1 sec then no other resultz ..thnakz for helping bro...
Click to expand...
Click to collapse
Have you tried leave it charging even there no led indication?
i also face this problem !!!
There is a solution Just hold that power and volume up key until u hear three vibraions then leave the phone it will completly off. then download Stock .ftf file depnding upon your phone modal and flash it through flashtool .
Done :good:
Nipunupekshana1 said:
but i cant see any vibrations on my phn by pressing keys when it connect to my sony wall charger only appering red led for a 1 sec then no other resultz ..thnakz for helping bro...
Click to expand...
Click to collapse

Categories

Resources