I recently bought a SGT 10.1 GT-P7510 on Craigslist. The tab was rooted and running the inFamous ROM 1.9.1 from AOKP. Worked great for a few days. One day, I turned it on and the wifi wouldn't turn on. At all. I'm brand new to Android, so after reading through forums and mucking about a bit, I tried a few things and ended up doing a factory reset. No dice. The wifi still wouldn't turn on. I gave it to a friend who's more experienced.
I got it back and now the OS won't boot at all. Upon startup, it just shows the Galaxy Tab 10.1 logo. When I hold the power to turn it off, it turns back on after about 3 seconds. I can still boot into Recovery and Download mode. Attached are some pictures of what I found in recovery mode:
Essentially, it looks like the internal sd card got formatted and wiped clean. There's nothing in that directory (or any other directory, for that matter). I'm thinking the tablet is completely empty, save some form of BIOS. Also, I can mount everything EXCEPT the SD card. That option doesn't change when selected
Is there anyway I can get any kind of OS back on here? I don't care if it's the original Honeycomb that came with it or the inFamous rom that was on there when I bought it. I'm just wondering if it can be salvaged or if it's bricked beyond belief.
I'm on a Mac running OS X 10.7, so I can't use Odin. I've tried my hand at Heimdall, but I can't find any firmware that'll load properly (keep getting an error message that the .tar file is the wrong size). Can anyone help me get this thing running again? It would be very much appreciated.
medleysa said:
I recently bought a SGT 10.1 GT-P7510 on Craigslist. The tab was rooted and running the inFamous ROM 1.9.1 from AOKP. Worked great for a few days. One day, I turned it on and the wifi wouldn't turn on. At all. I'm brand new to Android, so after reading through forums and mucking about a bit, I tried a few things and ended up doing a factory reset. No dice. The wifi still wouldn't turn on. I gave it to a friend who's more experienced.
I got it back and now the OS won't boot at all. Upon startup, it just shows the Galaxy Tab 10.1 logo. When I hold the power to turn it off, it turns back on after about 3 seconds. I can still boot into Recovery and Download mode. Attached are some pictures of what I found in recovery mode:
Essentially, it looks like the internal sd card got formatted and wiped clean. There's nothing in that directory (or any other directory, for that matter). I'm thinking the tablet is completely empty, save some form of BIOS. Also, I can mount everything EXCEPT the SD card. That option doesn't change when selected
Is there anyway I can get any kind of OS back on here? I don't care if it's the original Honeycomb that came with it or the inFamous rom that was on there when I bought it. I'm just wondering if it can be salvaged or if it's bricked beyond belief.
I'm on a Mac running OS X 10.7, so I can't use Odin. I've tried my hand at Heimdall, but I can't find any firmware that'll load properly (keep getting an error message that the .tar file is the wrong size). Can anyone help me get this thing running again? It would be very much appreciated.
Click to expand...
Click to collapse
Watch this video... https://www.youtube.com/watch?v=KYBs98R9rTs&feature=youtube_gdata_player ..All you need is there..
Thanks or the quick response. However, the link in the description for the Firmware files 404ed on me.
I downloaded the .tar file rom sammobile.com, but when I tried to load the package into Heimdall, it gave me an error that said the .tar file was the wrong file size. Is there somewhere else I can find the Firmware file for the GT-P7510?
medleysa said:
Thanks or the quick response. However, the link in the description for the Firmware files 404ed on me.
I downloaded the .tar file rom sammobile.com, but when I tried to load the package into Heimdall, it gave me an error that said the .tar file was the wrong file size. Is there somewhere else I can find the Firmware file for the GT-P7510?
Click to expand...
Click to collapse
I think there's Samfirmware. Though I haven't try there yet.
Sent from my GT-P7500 using Tapatalk HD
medleysa said:
Thanks or the quick response. However, the link in the description for the Firmware files 404ed on me.
I downloaded the .tar file rom sammobile.com, but when I tried to load the package into Heimdall, it gave me an error that said the .tar file was the wrong file size. Is there somewhere else I can find the Firmware file for the GT-P7510?
Click to expand...
Click to collapse
Take a read through this.. http://forum.xda-developers.com/showthread.php?t=878686 ... I don't use heimdall.. I missed that in the original post..it was late, sorry...see if this helps. If not.. Let me know and I'll see if I can search down a fix
medleysa said:
Thanks or the quick response. However, the link in the description for the Firmware files 404ed on me.
I downloaded the .tar file rom sammobile.com, but when I tried to load the package into Heimdall, it gave me an error that said the .tar file was the wrong file size. Is there somewhere else I can find the Firmware file for the GT-P7510?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/1/?model=GT-P7510&pcode=XAB#firmware
That's where to get the factory firmware
I have never had much luck with Heimdall. I have used Odin with pretty decent success.
Thanks so much for all your help. Unfortunately, I'm still having trouble with Heimdall. Whenever I try to load the firmware package, an error pops up saying "firmware.xml is missing from package." I'm guessing that this firmware isn't Heimdall friendly, or vice-versa. Any advice on how to circumvent this error?
medleysa said:
Thanks so much for all your help. Unfortunately, I'm still having trouble with Heimdall. Whenever I try to load the firmware package, an error pops up saying "firmware.xml is missing from package." I'm guessing that this firmware isn't Heimdall friendly, or vice-versa. Any advice on how to circumvent this error?
Click to expand...
Click to collapse
Here is the link I meant to give ya... http://forum.xda-developers.com/showthread.php?t=1348392 .. If the answer to heimdall errors isn't in there.. I have no idea... Set up a VM and use Odin..
Update:
I could never get Heimdall to read the .tar file and could need figure where to put what where. I guess I'm using a different version or am not tech savvy enough to understand what/how I'm doing wrong (which is a high possibility). I took it to my parents and loaded Odin using windows 7. Got the PIT file from a forum here and used the link to download stock firmware for 4.0.4. Ran Odin and it worked like a charm! My tab is running Samsung's stock 4.0.4 seamlessly, and my wifi is once again working. So much trouble over a small radio, but it is integral to the entire point and function of any tablet.
Thanks to everyone that sen in advice! I'm loading Virtualbox on my Mac tomorrow and using an extra key for Windows from my folks. Next step: rooting, setting up CW recovery, and booting Infamous AOKP 4.2!
Related
Hi there, please go easy on me. I did search XDA, googled other places and tried other things but getting the same. I am coming from iOS, got SGS2 and played a bit with it. Decided to flash new ROM as samsung stock was slow.
1. Rooted my phone with SuperOneClick.
2. Installed ClockWorkMod.
3. Downloaded CM7, put it onto my SGS2 and installed with ClockWorkMod (volume up+power+home)
4. Went further and got mysellf Simplistic ROM ICS XXLPB installed it with ClockWorkMod
5. Wanted to go back to CM7 so tired installing it with ClockWirkMod but something went wring and I ended up with sem-bricked SGS2
Whenever I fire up the phoone, the battery logo appears but is doesnt show itis charging. When I connect to KIES is isnt connecting the only (good) thing is I can put it in a download mode and Odin sees it so I caan try flashing it but whotever rom I am flashing in, I am getting the same "Invalid MD5 value."
I wanna go back to stock rom ERA PL (I9100XXKE4 ERA 05.2011 2.3.3) when I unrar it i got the following files, seems like PIT file is missing. Have a look at the attached. How do I restore my phone with ondin?
cudo said:
Hi there, please go easy on me. I did search XDA, googled other places and tried other things but getting the same. I am coming from iOS, got SGS2 and played a bit with it. Decided to flash new ROM as samsung stock was slow.
1. Rooted my phone with SuperOneClick.
2. Installed ClockWorkMod.
3. Downloaded CM7, put it onto my SGS2 and installed with ClockWorkMod (volume up+power+home)
4. Went further and got mysellf Simplistic ROM ICS XXLPB installed it with ClockWorkMod
5. Wanted to go back to CM7 so tired installing it with ClockWirkMod but something went wring and I ended up with sem-bricked SGS2
Whenever I fire up the phoone, the battery logo appears but is doesnt show itis charging. When I connect to KIES is isnt connecting the only (good) thing is I can put it in a download mode and Odin sees it so I caan try flashing it but whotever rom I am flashing in, I am getting the same "Invalid MD5 value."
I wanna go back to stock rom ERA PL (I9100XXKE4 ERA 05.2011 2.3.3) when I unrar it i got the following files, seems like PIT file is missing. Have a look at the attached. How do I restore my phone with ondin?
Click to expand...
Click to collapse
Im not an expert so you might want to wait for a more experienced persons comment....
but go to sammobile.com and download the firmware you want to flash....if PIT file is required you can search for it i believe, i remmeber ive seen a place earlier where you can download it.
Hope it helps
ab.riyami said:
Im not an expert so you might want to wait for a more experienced persons comment....
but go to sammobile.com and download the firmware you want to flash....if PIT file is required you can search for it i believe, i remmeber ive seen a place earlier where you can download it.
Hope it helps
Click to expand...
Click to collapse
Thanks, but the thing is I got the stock firmware I wanna use, but I keep getting the same error "MD5 value invalid" is PIT a generic file for all roms or is it ROM related?
cudo said:
Thanks, but the thing is I got the stock firmware I wanna use, but I keep getting the same error "MD5 value invalid" is PIT a generic file for all roms or is it ROM related?
Click to expand...
Click to collapse
Pit comes with each firmware but onSGS2 so far i believe its the same one . Details are on the site you got firmware from follow their instructions .
PIT file is not required and its dangerous for noobs to use .
Invalid MD5 value.
Two reasons why One bad download file corrupted or Two the more usual user is not following the instructions and making their own up .
jje
Thank you for your invaluable help.
can flash cm7 GT-i9100G ????
Go to intratech's thread about firmwares and download from there. And don't use PIT. You don't need it.
Sent from my GT-I9100 using xda premium
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
PS: I just this minute reflashed using Heimdall the I9300XXBLFB. Now it boots up, on first boot it said Updating Android optimsing applications 1/65 and proceeded thru to the point it asks me which language I want... this normal??
kuntstubble said:
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
Click to expand...
Click to collapse
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
gee2012 said:
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
Click to expand...
Click to collapse
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
OrbNRG said:
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
Click to expand...
Click to collapse
Once again, I'm using Heimdall not Odin. I'm on OSX not Windows.
Secondly the tar.md5 file is a tar file containing all the components that make the ROM.
kuntstubble said:
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
Click to expand...
Click to collapse
Oke, my bad. I don`t use heimdal so can`t help you.
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
HellcatDroid said:
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
Click to expand...
Click to collapse
Done that also, made no difference :-(
I don't care which ROM I recover correctly but I do want to get the phone working LOL
Use a windows pc and stop using mac?
Its really easy to fix your problem via Odin....
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
pedja381 said:
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Stupid reply USB Jig does not unbrick a phone .
ODIN how can the OP use Odin and why would you think its better than Heimdall ??? .
jje
OK the phone is running, but it's bizarre ...
Basically I'm connected to my WiFi signal, and Chrome works 100%... but the normal browser does'nt... just hangs, then closes.
GMail if I open it I can see all the mails, if I click on one, it just sits there with the circle going round, then closes, although if I scrolll thru all mails it does load more... very strange.
Seems any default apps that where installed have connection issues... It's really pi**ing me off....
Anyone?
BTW: *#1234# reports:
AP: I9300XXBLFB
CP: I93000XXLFB
CSC: I9300OXABLFB
It doesn't matter if you change .tar.md5 to .tar i always do it to.
What was the name of the pit you flashed?
Hi,
I downloaded GalaxyS3RootMac which contained a file called
s3pit.pit
MD5 (s3pit.pit) = c67ccbe3628793a9f0dba761c15e0896
Thats the one I used ... stupidly ... so I guess I overwrote mine own one...
I had this exact same thing with browser. That was caused eather from wrong csc or that I mistakenly flashed the firmware using phone field in odin and not pda. Try to change your csc to something else using *#272*IMEI#. That wipes the phone.
Tried what you recommend but still same problem
I choose BTC btw
It previously was on KOR
Sent from my GT-I9300 using xda premium
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
d4fseeker said:
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi, well you're completely correct I could go bootcamp although I prefer not to. If all else fails I'll do it that way. Sadly today I can't get my hands on a Windows system to use.
The phone is a Benelux model I believe (bought from Mobistar), under that battery it says i9300 from what I remember.
Cheers for the logical response
I got exactly the same problem as the OP with the S3, a Macbook Air on Lion, and Heimdall yesterday. I was frustrated but ended up trying Odin on a Windows 7 virtual machine to re-flash a stock firmware. It went through perfectly and I was saved.
Hey peeps
Ok I've been at this for two straight days now in order to try and unbrick this Telus Fascinate SGH-T959P
My buddy initially attempted to flash it with something and really messed it up to the point that even the battery wouldn't charge.
I don't even care if I get it to stock.. an amazing Rom/Kernel combo will also work.
So this is where I am today... and I have spent the last two days non-stop trying to fix this thing...I have been through sooo many forums posts and websites my brain is about to cook.
Software I am using
Odin v1.7 and v1.83.. I try to use the newest one.. just in case.
ADB / SDK installed and am able to push files across to the sdcard in my phone... everything seems good in that dept
Files that have got me to where I am today
T959TLJL3 Froyo original firmware (apparently)... but can not flash all of the files from the package ..zimage and a few others just fail to flash
s1_odin_20100512.pit file (Have atlas_v2.2.pit also but haven't had as much success with it)
SGH-T959-Stock_plus_voodoo_CwM_2.3.4v2
su-2.3.6.3-efgh-signed
I can successfully boot the phone into download mode every single time using the volume up and down while plugging in the usb cable
Also if i just hit the power button I get a Telus 4G / Samsung splash screen and then the phone boots into CwM Voodoo Recovery v3.0.2.8x (Orange??)
In the CwM recovery mode, I can now finally mount all partitions and it looks like things will flash.
Now that I've finally got this phone to this point, I don't want to mess it up.
I want to make sure I have the right files to complete this little project.
Need some direction from the pros.. Am I able to flash a custom rom now ? And if so, what one is best to use.
From this point how can I revert to stock? Do I have the right files ? And how since Odin fails to flash the ones I have.
I figured going to stock first was easier, then use Kies to update it.
Show me the way
Thanks.
jROC
Wow... I got it .. Finally... After I figure out exactly what I used for files.. I will let you know.
All I can tell you right now is that I was flashing a single files at a time then powering down and coming back into download mode to flash the next file.
Right now the phone is all booted up and Running Android v2.3.3 (GB LKG2) and even tho the phone is actually a T959P.. the boot screen shows up as a T959D. Interesting.
jroc99 said:
Wow... I got it .. Finally... After I figure out exactly what I used for files.. I will let you know.
All I can tell you right now is that I was flashing a single files at a time then powering down and coming back into download mode to flash the next file.
Right now the phone is all booted up and Running Android v2.3.3 (GB LKG2) and even tho the phone is actually a T959P.. the boot screen shows up as a T959D. Interesting.
Click to expand...
Click to collapse
Can you send me the T959P stock files please
robbylaw said:
Can you send me the T959P stock files please
Click to expand...
Click to collapse
No single file that I downloaded was able to flash the phone.
I ended up flashing individual files... and kinda had to mix and match, but was able to get the phone booting back into Android OS
However the phone was missing the EFS folder with IMEI info and such..
Still was not able to recover it 100%.
Message me with your email and I will try to send what I used.
jroc99 said:
No single file that I downloaded was able to flash the phone.
I ended up flashing individual files... and kinda had to mix and match, but was able to get the phone booting back into Android OS
However the phone was missing the EFS folder with IMEI info and such..
Still was not able to recover it 100%.
Message me with your email and I will try to send what I used.
Click to expand...
Click to collapse
i messaged you
Ok peeps... If anyone is looking for a firmware file to get their phone booting back into droid I have one that works.
Works on Telus T959P
I have dropbox setup and can share with you that way, just message me.
I need a copy
Sent from my GT-P5113 using xda app-developers app
I've been trying to unbrick an T959P as well, have it so i can also boot into CWM (from SGH-T959-Stock_plus_voodoo_CwM_2.3.4v2) but can never get it too boot into the OS. Tried several files to revert it back to stock but so far nothing has worked. Any hints would be appreciated, thanks in advance
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hopefully it soft bricked not hard bricked.
Fury_Phoenix said:
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hopefully it soft bricked not hard bricked.
Click to expand...
Click to collapse
I posted that in 2013 the device is long gone, thanks for the input though.
draekko said:
I posted that in 2013 the device is long gone, thanks for the input though.
Click to expand...
Click to collapse
Do you have twrp or cwm for the phone?
Fury_Phoenix said:
Do you have twrp or cwm for the phone?
Click to expand...
Click to collapse
I don't have the phone or any software related to that phone. That post was from 7 years ago.
Hi,
Today I bought a galaxy note 2 off someone and its stuck in a bootloop.
It starts up and goes the Verizon 4G LTE screen and that's it.
I tried going into recovery and it says E:failed to mount /efs (Invalid argument)
I've tried using Odin and the phone to flash a stock file but they just dont work. Odin stopped working when the top thing said flashing recovery then it changed to "fail" in a red box. On the bottom it said Complete (write) operation failed.
Any ideas. Worst case its a parts phone but I really think/hope its fixable.
Thanks
I should add that when Odin fails the device says something about a firmware error and to use the Kies software. The Kies software just hangs at "connecting" so I was able to exit out of that message by going back to Odin and JUST using the 16gb PIT file. Then after that, I'm back to step 1 where it hangs at the 4G LTE bootloop.
Thanks
Use Odin, flash the alternate restore package with PIT file and repartition selected.
imnuts said:
Use Odin, flash the alternate restore package with PIT file and repartition selected.
Click to expand...
Click to collapse
I googled the alternate restore package and I downloaded one from a thread that you made. It downloads as a tar.md5.xz file and then Odin can't recognize it. Any ideas? Also whats the difference between VRAM and VRAL in the files since I found two files with those names in that thread.
Thanks
enferrari said:
I googled the alternate restore package and I downloaded one from a thread that you made. It downloads as a tar.md5.xz file and then Odin can't recognize it. Any ideas? Also whats the difference between VRAM and VRAL in the files since I found two files with those names in that thread.
Thanks
Click to expand...
Click to collapse
Alright, After making a folder I got the 7z file to extract into a tar.md5 and restored my note 2 with the PIT file as well. It went through successfully and Odin said it was successful. Upon restart the phone was still in a boot loop. I went into recovery and it says "failed to mount /efs" again Any more tips
enferrari said:
Alright, After making a folder I got the 7z file to extract into a tar.md5 and restored my note 2 with the PIT file as well. It went through successfully and Odin said it was successful. Upon restart the phone was still in a boot loop. I went into recovery and it says "failed to mount /efs" again Any more tips
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=34891181
In section 1b, use the vramc3 file and pit file. If that doesnt work, try it with both files and reparation checked. As a note, this vramc3 is the actual stock software and will relock the phone so if it works and boots, you will need to use casual to unlock it again.
Sent From My Sticky Note, Too?
I had the exact same issue recently. Failed to mount EFS partition (If you see this in your stock recovery, you have a HUGE issue on your hands)... Stuck in a bootloop no matter if Odin is successful or not. Nothing I did booted it back up. So I thought I was screwed.
Now if none of the above methods work for you, I HIGHLY suggest you check out mobiletechvideos.com. They take care of bricks, which sounds like that's where you're at.. They fix EFS issues, and everything you can think of. They have great reviews. And I actually took the plunge and went to them to fix my phone at the time.. I paid for the unbrick service, a new USB cord, and rush processing. Cost around $100. Which costs me a lot less than buying another phone and/or using my upgrade.
Once my phone returned, I factory resetted the phone, and all was perfect. I suggest you trying that if these methods don't work for you. I can thank @ForeverSupra for sending me to them.
Mobiletechvideos.com
Try the VRALJB alternate restore package. It has an xz extension, but 7zip can extract it. There may be an issue with the VRAMC3 package, but I haven't had a chance to look into it to confirm and/or fix it.
imnuts said:
Try the VRALJB alternate restore package. It has an xz extension, but 7zip can extract it. There may be an issue with the VRAMC3 package, but I haven't had a chance to look into it to confirm and/or fix it.
Click to expand...
Click to collapse
Ok I'll try that. I tried the VRAMC3 and it said it was successful but it was still stuck in a boot loop . Will download the VRALJB and keep you guys updated. Worst case I'll just list it for parts on eBay - I only paid $60 for it since the guy said it was stuck in this boot loop and I thought it would be an easy fix. I appreciate you guys helping me.
Ohh_Trenton said:
I had the exact same issue recently. Failed to mount EFS partition (If you see this in your stock recovery, you have a HUGE issue on your hands)... Stuck in a bootloop no matter if Odin is successful or not. Nothing I did booted it back up. So I thought I was screwed.
Now if none of the above methods work for you, I HIGHLY suggest you check out mobiletechvideos.com. They take care of bricks, which sounds like that's where you're at.. They fix EFS issues, and everything you can think of. They have great reviews. And I actually took the plunge and went to them to fix my phone at the time.. I paid for the unbrick service, a new USB cord, and rush processing. Cost around $100. Which costs me a lot less than buying another phone and/or using my upgrade.
Once my phone returned, I factory resetted the phone, and all was perfect. I suggest you trying that if these methods don't work for you. I can thank @ForeverSupra for sending me to them.
Mobiletechvideos.com
Click to expand...
Click to collapse
Looks like I'm in the same position as you. One last try and Im probably gonna list it for parts.
If it doesn't work, and you're interested in selling it, let me know as I may be interested in picking it up to try and fool around with, if the price is right.
Hi guys, I've been flashing different roms lately on my sgs3 international with no problems until today. I tried to flash a particular rom using TWRP which failed. I restored a nandroid backup with no problems, and wondered if the flashing fail was because TWRP needed updating, so i downloaded the latest version and flashed it via Odin, which seemed to go ok, until the phone tried to reboot and got stuck at the 'Samsung Galaxy SIII GT-1300' screen, and wouldn't get any further. I tried a few more times to boot it but it was a no-go. I removed the battery and left it out for an hour or two and retried, nothing. I downloaded CWM recovery, with the intention of replacing TWRP, but Odin refuses to see the .tar file, no matter where I put it. It still sees the new TWRP.tar file though. I downloaded a stock Sammy rom, Odin wont see it. Ive tried Odin versions 1.85 and 3.09, but no-go.
I've scoured XDA, and the net for hours, but it all stops with Odin not seeing any .tar files. I'm all out of ideas guys. Can somebody please help me with this?
Many thanks, Dave
Zigg49 said:
Hi guys, I've been flashing different roms lately on my sgs3 international with no problems until today. I tried to flash a particular rom using TWRP which failed. I restored a nandroid backup with no problems, and wondered if the flashing fail was because TWRP needed updating, so i downloaded the latest version and flashed it via Odin, which seemed to go ok, until the phone tried to reboot and got stuck at the 'Samsung Galaxy SIII GT-1300' screen, and wouldn't get any further. I tried a few more times to boot it but it was a no-go. I removed the battery and left it out for an hour or two and retried, nothing. I downloaded CWM recovery, with the intention of replacing TWRP, but Odin refuses to see the .tar file, no matter where I put it. It still sees the new TWRP.tar file though. I downloaded a stock Sammy rom, Odin wont see it. Ive tried Odin versions 1.85 and 3.09, but no-go.
I've scoured XDA, and the net for hours, but it all stops with Odin not seeing any .tar files. I'm all out of ideas guys. Can somebody please help me with this?
Many thanks, Dave
Click to expand...
Click to collapse
Try running Odin in administrator mode and placing .tar file on your desktop and delete the twrp file first so Odin definitely can't see it.
tallman43 said:
Apart from the trouble you are having with Odin you say you tried to boot it a few more times but failed. Did you mean it failed to boot into a rom or boot into twrp or both.
Click to expand...
Click to collapse
Both, actually. I can get into download mode, but nothing else. Thanks for replying so quickly.
Zigg49 said:
Both, actually. I can get into download mode, but nothing else. Thanks for replying so quickly.
Click to expand...
Click to collapse
I thought so sorry i didn't read you post correctly have you tried my suggestion above I edited my post.
tallman43 said:
I thought so sorry i didn't read you post correctly have you tried my suggestion above I edited my post.
Click to expand...
Click to collapse
Trouble is, I can only launch Odin directly from the rar file I downloaded for some reason. It doesn't want to install itself, or give me a shortcut to be able to run it as admin.
Zigg49 said:
Trouble is, I can only launch Odin directly from the rar file I downloaded for some reason. It doesn't want to install itself, or give me a shortcut to be able to run it as admin.
Click to expand...
Click to collapse
Also, I have deleted the TWRP file, but it didn't make any diffrence. (wasn't in admin admittedly).
Off to bed now. Thanks for taking the time to help, hopefully You, or someone else will have solved it by tomorrow
That why its not working you need to extract it from the rar file with 7z or similar unzip program
tallman43 said:
That why its not working you need to extract it from the rar file with 7z or similar unzip program
Click to expand...
Click to collapse
Sorry for not getting back to you sooner, I've been out all day.
But, and don't think I'm arguing here, how come it saw the TWRP .tar file, and let me flash it? I've always had to launch Odin in this way, and it's never let me down before. That being said, I will try and manage a permanent install, and hope it does the trick, thanks.
Zigg49 said:
Sorry for not getting back to you sooner, I've been out all day.
But, and don't think I'm arguing here, how come it saw the TWRP .tar file, and let me flash it? I've always had to launch Odin in this way, and it's never let me down before. That being said, I will try and manage a permanent install, and hope it does the trick, thanks.
Click to expand...
Click to collapse
So, this is what I did. Don't ask me why, it was more an act of desperation than anything else, was unpack the CWM onto my desktop and lo and behold, Odin started to play and recognised the unpacked .md5 file, how weird is that? I've read in the past, about folk who have mistakingly unpacked the .rar file, and then Odin not doing its thing, but never the other way round!
Ok, so good news, right? Err, nope, 'cos even after I managed to flash CWM, the phone still wouldn't boot!
Soooooo....remember the stock sammy rom I mentioned? Well, I did the same thing with that ie. unpacked the .rar and flashed the .md5 file, and, long story short, it went in, albeit after what seemed like a very long writing process. So here I am with a working phone again, although I realise now that it was a Vodaphone file, and my phone is unrooted, but, hey, it's working .
All I have to do now is re-root it, and flash a rom of my choice.....what could possibly go wrong? (cue maniacal laughter)
Zigg49 said:
So, this is what I did. Don't ask me why, it was more an act of desperation than anything else, was unpack the CWM onto my desktop and lo and behold, Odin started to play and recognised the unpacked .md5 file, how weird is that? I've read in the past, about folk who have mistakingly unpacked the .rar file, and then Odin not doing its thing, but never the other way round!
Ok, so good news, right? Err, nope, 'cos even after I managed to flash CWM, the phone still wouldn't boot!
Soooooo....remember the stock sammy rom I mentioned? Well, I did the same thing with that ie. unpacked the .rar and flashed the .md5 file, and, long story short, it went in, albeit after what seemed like a very long writing process. So here I am with a working phone again, although I realise now that it was a Vodaphone file, and my phone is unrooted, but, hey, it's working .
All I have to do now is re-root it, and flash a rom of my choice.....what could possibly go wrong? (cue maniacal laughter)
Click to expand...
Click to collapse
Glad to see you got it working but it's not weird at all you could have saved yourself alot of trouble by saying in your first post that your files where originally in .rar format. It is normal procedure to unpack .rar files for them to work in programs and especially for them to work in Odin so that it can recognize them.
tallman43 said:
Glad to see you got it working but it's not weird at all you could have saved yourself alot of trouble by saying in your first post that your files where originally in .rar format. It is normal procedure to unpack .rar files for them to work in programs and especially for them to work in Odin so that it can recognize them.
Click to expand...
Click to collapse
Ahh, ok . But I've always just directed Odin to the .rar file, and never had this problem before. Oh well, you live and learn, eh?
Thanks for your help:good: