Hey everone i flashed firmware to my phone with odin (and i think i checked REPARTITION and NAND ERASE ALL) So i think i neet PIT file. but i don't now is .tar file include the .pit file? if it is any suggestions to unbrick? if there is not any pit file how can i repartition my device? Phone is not even play boot sound fully. in cwm i cant mount data
"SOLVED WITH STOCK RECOVERY DATA WIPE"
I have a pit file, but only 16G version ,not 8G version!
If u need, I can offer to u
And plz do me favor, I need a international Mega's bootloader file...
Sent from my GT-I9200 using xda app-developers app
diaofengyi said:
I have a pit file, but only 16G version ,not 8G version!
If u need, I can offer to u
And plz do me favor, I need a international Mega's bootloader file...
Sent from my GT-I9200 using xda app-developers app
Click to expand...
Click to collapse
I fixed my device but bootloader file? how can i get it?
diaofengyi said:
And plz do me favor, I need a international Mega's bootloader file...
Click to expand...
Click to collapse
Install the "Shell Terminal Emulator" and type getprop. On listing see the line [ro.bootloader]: [I9200xxxxxxx].
What bootloader You have here on xxxxxxx ?
My bootloader is Ch version now, I need reflash intl bootloader into my phone
Coz Ch bootloader is different than intl version, so I can't flash intl Rom to my device,
Trust me, I tried, always failed!!
Sent from my GT-I9200 using xda app-developers app
Please I need PIT file for my Mega i9200 8GB phone
Please Please Please :crying: :crying: :crying: :crying:
I need seriously and quickly as possible help. Please give me PIT file for my phone. I flashed the phone with odin. I updated cwm recovery touch and then factory reset with it.
After that I can't flash any rom with odin. Because
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
What can I do please help me ((
samsung galaxy mega i9200 PIT file ??
Try this one!
Related
Hi all, My S3 GT-I9300 international edition, bought on Amazon from some German place, orignal stock Samsung no mods went into a boot loop Xmas day (yeah, what a present!).
I could then go into recovery mode and cleared the cache. Still boot loop AND I could NO LONGER get to recovery mode, but can get into Download Mode just fine. So there is hope...
I read this tread http://forum.xda-developers.com/showthread.php?t=1457458
I am hoping this is the way to go for me. Experts may comment, please.
I am looking for kernel AND pit files. Where can i get them?
I tried using Siyah-s2-v5.0.1 but do not have a PIT file for it.
When I try to use it heimdall says I do not have the right PIT file:
"
Beginning session...
Session begun with device of type: 131072
Downloading device's PIT file...
PIT file download sucessful
ERROR: Partition corresponding to -kernel argument could not be located
"
I am on OS X with heimdall working fine.
Please help if you can and know more.
thank you so much
E
Using this rom:
I9300XXELL4_I9300O2UELL1_I9300BWELK1_HOME
and the Siyah-s2-v5.0.1 kernel, I can do:
heimdall flash --primary-boot boot.img --verbose
OK
heimdall flash --recovery recovery.img --verbose
OK
but nothing else. I cannot do:
heimdall flash --kernel zImage --verbose
it says:
ERROR: Partition corresponding to -kernel argument could not be located
Boot loop is flash stock rom via Odin.
Stay away from pit files .
jje
Sent from my GT-N8013 using xda premium
culurciello said:
Using this rom:
I9300XXELL4_I9300O2UELL1_I9300BWELK1_HOME
and the Siyah-s2-v5.0.1 kernel,
Click to expand...
Click to collapse
Why are you using siyah s2 kernel if you have an s3 maybe thats the reason you got into bootloop
Sent from my GT-I9300 using xda premium
LOL
1. download an stock rom from www.samfirmware.com
2. dont make the same mistake as you did with before download a SIII rom instead of an SII rom...
3. Use ODIN to flash to a stockrom AND NEVER FLASH .PIT FILES with ODIN unless YOU reallyyy need it.
4. now keep it or move to a custom ROM for the SIII and not SII AKA S2
and for the rest i wish you an merry christmas and a early happy new year
haydar100 said:
and for the rest i wish you an merry christmas and a early happy new year
Click to expand...
Click to collapse
thank you and you too!
I am on with Odin now and this guide:
widefide.com/mobile/galaxy-s3-boot-problem-solution
I think I need a PIT file because of the errors:
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried the pit file here
widefide.com/mobile/galaxy-s3-boot-problem-solution
and the stock rom :
I9300XXALE8_I9300O2UALE5_I9300BWLE5_HOME.tar.md5
still nothing I cannot seem to get Pit partitioning to work
PS. Yes I did make a huge mistake with the S2 kernel... how silly!
Service Centre required before you totally destroy the phone .
jje
phone is already dead due to component problem: Samsung KMVTU000LM eMMC(16GB)+MDDR(64MB) NAND Flash
see thread here:
on: forum.xda-developers: showthread.php?t=1993044
CASE CLOSED
thank you all for your help
took me 3 days to figure all of this out...
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
hello
S3 stuck at boot - samsung logo and i cannot enter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
ancilary said:
hello
S3 stuck at boot - samsung logo and i cannot enter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
Click to expand...
Click to collapse
Put ur fone in download mode first. Then connect ur fone to the cpu thru the usb ports at the back of the cpu.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
ancilary said:
hello
S3 stuck at boot - samsung logo and i cannot enter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
Click to expand...
Click to collapse
Download Firmware Go TO (Samfirmware.com/Sampro.pl)
Download Samsung USB Driver(Download In Google)
Enter To Download MODE
And Download ODIN(Download In Google)
PLUG IN USB TO U PHONE
In Square Detect U Phone (Com:2)etc
SelectPDA>Firmware.md5
and START
Wait 5Minute And in SQUARE PASS
REMOVE U CABLE AND TARAAA U PHONE NORMALY :good:
ancilary said:
hello
S3 stuck at boot - samsung logo and i download.odenter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
Click to expand...
Click to collapse
Download Samsung drivers and unzip it to yr desktop, connect yr ph in download mode. Go to device manager in yr pc,u will probably see a triangle with ! , update yr drivers, click on let me choose and point to the drivers and reinstall it. Then open Odin Cheers!
JellyYogurt said:
Put ur fone in download mode first. Then connect ur fone to the cpu thru the usb ports at the back of the cpu.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
VerlyAnanda said:
Download Firmware Go TO (Samfirmware.com/Sampro.pl)
Download Samsung USB Driver(Download In Google)
Enter To Download MODE
And Download ODIN(Download In Google)
PLUG IN USB TO U PHONE
In Square Detect U Phone (Com:2)etc
SelectPDA>Firmware.md5
and START
Wait 5Minute And in SQUARE PASS
REMOVE U CABLE AND TARAAA U PHONE NORMALY :good:
Click to expand...
Click to collapse
ndmuni said:
Download Samsung drivers and unzip it to yr desktop, connect yr ph in download mode. Go to device manager in yr pc,u will probably see a triangle with ! , update yr drivers, click on let me choose and point to the drivers and reinstall it. Then open Odin Cheers!
Click to expand...
Click to collapse
hello
its showing in odin from back cpu port but i cannot install any kernel or firmware it is giving pit error
phone details
MODEL : GT-i9300
FCC ID : A3LGTI9300A
SSN:-I9300GSMH
can u tell me where can i find stock pit and firmware for this model?
ancilary said:
hello
its showing in odin from back cpu port but i cannot install any kernel or firmware it is giving pit error
phone details
MODEL : GT-i9300
FCC ID : A3LGTI9300A
SSN:-I9300GSMH
can u tell me where can i find stock pit and firmware for this model?
Click to expand...
Click to collapse
Should work without PIT so just try again There are many guides in XDA on how to flash stock fw with Odin.
Perka said:
Should work without PIT so just try again There are many guides in XDA on how to flash stock fw with Odin.
Click to expand...
Click to collapse
bro its saying some pit error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Why did you end up in bootloop?
Also there's a thread for PIT
Sent from my GT-I9300 using xda app-developers app
ancilary said:
hello
its showing in odin from back cpu port but i cannot install any kernel or firmware it is giving pit error
phone details
MODEL : GT-i9300
FCC ID : A3LGTI9300A
SSN:-I9300GSMH
can u tell me where can i find stock pit and firmware for this model?
Click to expand...
Click to collapse
careful when using pit
ancilary said:
bro its saying some pit error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
DeSelect Re-partion
Perka said:
Should work without PIT so just try again There are many guides in XDA on how to flash stock fw with Odin.
Click to expand...
Click to collapse
Perka said:
Why did you end up in bootloop?
Also there's a thread for PIT
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
phone automatically stopped and this happened
ndmuni said:
careful when using pit
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
ancilary said:
phone automatically stopped and this happened
Click to expand...
Click to collapse
So you did nothing, and then it went in to bootloop?
Does it's show product name on Odin mode in download mode? If it's blank there, it's means that you have got SDS and you need motherboard replacement.
Perka said:
So you did nothing, and then it went in to bootloop?
Click to expand...
Click to collapse
Simonna said:
Does it's show product name on Odin mode in download mode? If it's blank there, it's means that you have got SDS and you need motherboard replacement.
Click to expand...
Click to collapse
after reading supersu thread i found out that i have half SDS
is there anyway to fix it ourself?
No, warranty repair or new motherboard required.
Sent from my GT-I9300 using Tapatalk
Hello guys,
I just reflash my friend's s3 with .pit file
But now its not boot up...
Error shown :
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Erase...
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> SingleDownload.
<ID:0/019> boot.img
<ID:0/019> NAND Write Start!!
And the progress bar in the s3 is full... But unable to boot.. Please help...
Note : Only able to boot to download mode
satrio125 said:
Hello guys,
I just reflash my friend's s3 with .pit file
But now its not boot up...
Error shown :
SetupConnection..
Initialzation..
Erase...
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
And the progress bar in the s3 is full... But unable to boot.. Please help...
Note : Only able to boot to download mode
Click to expand...
Click to collapse
First thing put zip file of a custom ROM on your SD card then flash a custom recovery with a.tar file (can be found on various recovery threads) by going in download mode. Then boot into recovery and flash that zip file..
Sent from my GT-I9300 using xda app-developers app
kunal1540 said:
First thing put zip file of a custom ROM on your SD card then flash a custom recovery with a.tar file (can be found on various recovery threads) by going in download mode. Then boot into recovery and flash that zip file..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your help.. But my problem just solved using this guide :
http://forum.xda-developers.com/showthread.php?t=2535367
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
honzicek69 said:
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
Click to expand...
Click to collapse
If I'm not mistaken boot.img is the bootloader, not the recovery. Are you sure you can't get into recovery using the 3-button-combo? If not I would try flashing this recovery via ODIN. And then try to reboot into it using the combo. Then flash CM zip from there again.
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
honzicek69 said:
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
Click to expand...
Click to collapse
Ah, I'm sorry I misunderstood. I thought that was just a snippet of the log... Try flashing the recovery I provided and see if it flashes. If not, maybe you can flash stock firmware with pit file (new partition table). If nothing flashes, I have no further ideas.
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
rp158 said:
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
Click to expand...
Click to collapse
I could be mistaken but I believe the 3-part-roms (csc / pda / phone) is the "old style" how roms where put out by sammy. You would have to search but I would think you can also use the version you get from sammobile nowadays (one zip) and additionally just use the gt-i9300 pit file found somewhere here in the forums.
@Hawaiihemd: be shure, you're wrong.
honzicek69 said:
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
Click to expand...
Click to collapse
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
rp158 said:
@Hawaiihemd: be shure, you're wrong.
Click to expand...
Click to collapse
@rp158 Well, I think I only made a small error in my assumption.
Here are the details on the sammobile download. It seems to hold everything a "3-part-version" holds. I downloaded the file and a look at the .tar file inside the single .zip seems to confirm that.
This post suggests that flashing the .tar with the pit file should work.
I don't know because I haven't tried myself, maybe you have. Or I'm missing a piece of the puzzle. If so, maybe you could point me to it!?
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
rp158 said:
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
Click to expand...
Click to collapse
You didn't, don't worry. I was a little stumped maybe, but only because your answer was so terminal. Actually I only wanted to start a discussion about this, because you seemed to know more about said process than me and I always try to gain knowledge here to better help solving problems. I haven't been in this forum for long or into android for that matter...
That said, I have done the "3-files" version of this process with a .pit file thrice already on different gt-i9000s. Always worked flawlessly.
Looking at the ones in the post @tallman43 suggested, I found the contents of those 3 .tar.md5 files in summary(!) similar to the ones in the 1 .zip from sammobile. That's why I thought it could work in the first place.
One thing I'm sure of is that in both cases the repartition info is in the .pit file. If you choose none, the MMC should not be repartioned. If partitions are reformatted... that's another deal.
Concerning the efs partition, to/from where that info is stored/restored during repartitioning of the MMC... that's a very interesting question!
tallman43 said:
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
Click to expand...
Click to collapse
Thank you very much for this hint. It worked well. I used the all files from KOR zip and 1.85 ODIN. Now i have the Korean version but at least i have something to start with and phone which works now.