Related
Ok i need help so i have the telus samsung fascinate 4g and yes it is rooted its running 2.3.4 and i have put CWM on it but every time i try to boot into the recovery it goes to the stock recovery and when i try to install a rom on it i get that stupid E:signature verification failed or whatever it is how to i fit it so i can install roms
How did you load the cwm recovery onto the phone? If you didn't use the program odin, then you didn't do it right. The reason it boots to the stock recovery is because your cwm recovery didn't load. Pretty simple to fix, just download odin and read up about it (its very simple to use) and then flash this cwm recovery using the program : http://dl.dropbox.com/u/32493357/cwm4_fixed_for_cm7-ODIN.tar
Then boot into recovery and you will have cwm recovery!
ok so where do i put this file in odin?
darkninja66 said:
ok so where do i put this file in odin?
Click to expand...
Click to collapse
Put it under the pda section
Sent from my SCH-I500 using XDA App
Just a heads up if you did not know already, make sure you only use files that are compatible with telus.... flashing a fascinate rom on a telus version will leave you bricked.
ok so i put it in the pda section and i hit start and the phone it was in download mode and it registered but when i hit start i got this message
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.bin
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi guys, i have an i9100p currently runnning custom rom and i would like to flash the stock ICS rom from my carrier (orange) i downloaded Odin and the rom itself from samfirmware and also the flashguide for some help. the flashguide mentions putting each file in the correct place but this rom file only has 1 file(a ZIP file) also do i need to re partition etc.. i have looked elseware on XDA but only seemed to come across the guides where there is the Phone modem and CSC but as i have none of those files, i really need help... thanks guys
Extract the zip, you'll be able to find the needed files there.
curodot said:
Extract the zip, you'll be able to find the needed files there.
Click to expand...
Click to collapse
Theres just one MD5 file?
AntAust1513 said:
Hi guys, i have an i9100p currently runnning custom rom and i would like to flash the stock ICS rom from my carrier (orange) i downloaded Odin and the rom itself from samfirmware and also the flashguide for some help. the flashguide mentions putting each file in the correct place but this rom file only has 1 file(a ZIP file) also do i need to re partition etc.. i have looked elseware on XDA but only seemed to come across the guides where there is the Phone modem and CSC but as i have none of those files, i really need help... thanks guys
Click to expand...
Click to collapse
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
bala_gamer said:
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
Click to expand...
Click to collapse
thanks for your help! .. do i need to tick re partition or auto reboot or anything?
AntAust1513 said:
bala_gamer said:
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
Click to expand...
Click to collapse
thanks for your help! .. do i need to tick re partition or auto reboot or anything?
Click to expand...
Click to collapse
Reading fail.
ctomgee said:
Reading fail.
Click to expand...
Click to collapse
just being sure, i bricked my old phone using odin a while ago so im cautious thanks for all your help
AntAust1513 said:
just being sure, i bricked my old phone using odin a while ago so im cautious thanks for all your help
Click to expand...
Click to collapse
go ahead and flash , and do please take some good time to read .
bala_gamer said:
go ahead and flash , and do please take some good time to read .
Click to expand...
Click to collapse
Yeah yeah i think im in bootloop (its been about 5 minutes) any ideas? its a stock from for my phone.
AntAust1513 said:
Yeah yeah i think im in bootloop (its been about 5 minutes) any ideas? its a stock from for my phone.
Click to expand...
Click to collapse
|Yes the dont post yet another bootloop post at the top of the page .
jje
WINNING. Sorted
XmitData fail
HI Guys, Flashing the ROM via Odin I get the following error:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img.md5
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img.md5
<ID:0/011> system.img.md5
<ID:0/011> __XmitData_Read ..
<ID:0/011> XmitData Fail..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched the net and unable to get any related issues, please help.
dabnis said:
HI Guys, Flashing the ROM via Odin I get the following error:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img.md5
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img.md5
<ID:0/011> system.img.md5
<ID:0/011> __XmitData_Read ..
<ID:0/011> XmitData Fail..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched the net and unable to get any related issues, please help.
Click to expand...
Click to collapse
Are you sure you are flashing the right ROM for your device?
I9100?
If yes:
Try this and/or this(unbranded 4.0.3 recommended).
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
my s6 edge is bricked from failed root and when i try to install firmware i get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
DevonSweeney said:
my s6 edge is bricked from failed root and when i try to install firmware i get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I also tryed to root my phone and now im also stuck with this error message when i try to fix it.
Witch Rom do you come from and witch Rom do you try to flash ?
edzamber said:
Witch Rom do you come from and witch Rom do you try to flash ?
Click to expand...
Click to collapse
well, im kinda a noob at this stuff so im not sure, but if you meant what firmware then its 5.1.1,
add me on skype if you would like to help me more please "@[email protected]"
I think you have try to flash a Rom with old bootloader, thats why odin fail at Sboot part (bootloader). Try to dl and flash last Rom for your device (at least COI9).
Sorry, no Skype user...
edzamber said:
I think you have try to flash a Rom with old bootloader, thats why odin fail at Sboot part (bootloader). Try to dl and flash last Rom for your device (at least COI9).
Sorry, no Skype user...
Click to expand...
Click to collapse
Im sorry but that makes no sense to me, is there a way you can give me a quick tutorial, i am a noob
Ok, no worries
What is your S6 edge model (g925f, g925i...)?
edzamber said:
Ok, no worries
What is your S6 edge model (g925f, g925i...)?
Click to expand...
Click to collapse
SM-G925F
Great, witch location/region ?
I mean witch country ?
For exemple, I'm on G925F France.
I need this information to give you a link...
edzamber said:
Great, witch location/region ?
I mean witch country ?
For exemple, I'm on G925F France.
I need this information to give you a link...
Click to expand...
Click to collapse
SM-G925F Northern Ireland
But Northern Ireland Is Kinda Part Of The UK
Ok.
I think you have to install last UK COI9.
Here is link to dl on Sammobile.com. If you havn't an account, register for free to dl.
http://www.sammobile.com/firmwares/download/57658/G925FXXU3COI9_G925FBTU3COJ1_BTU/
Then, extract firmware zip with 7zip on your Desktop.
If there is only one file, flash it into AP
If there is 4 files :
BL file in BL
AP file in AP
CSC file in CSC
Modem file in CP
Let me know
edzamber said:
Ok.
I think you have to install last UK COI9.
Here is link to dl on Sammobile.com. If you havn't an account, register for free to dl.
http://www.sammobile.com/firmwares/download/57658/G925FXXU3COI9_G925FBTU3COJ1_BTU/
Then, extract firmware zip with 7zip on your Desktop.
If there is only one file, flash it into AP
If there is 4 files :
BL file in BL
AP file in AP
CSC file in CSC
Modem file in CP
Let me know
Click to expand...
Click to collapse
can i use winrar? and can you link me to odin, an odin which you would use please?
Yes Winrar working too.
Here is Odin i use :
http://www.mediafire.com/?x3lefbe2uu8hv8f
edzamber said:
Yes Winrar working too.
Here is Odin i use :
http://www.mediafire.com/?x3lefbe2uu8hv8f
Click to expand...
Click to collapse
thanks so much for the help so far, lets hope it works!!
You're welcome.
Let me know
edzamber said:
You're welcome.
Let me know
Click to expand...
Click to collapse
so i just put my phone into download mode, add it to odin.
then load the file inside the zip file into the AP?
correct?
* Extract Rom file.tar.md5 from Rom zip on your desktop with Winrar
* Open Odin as administrator
* In case of one single AP file, clic on AP into Odin and add AP file to load in
* Wait until odin load AP file
* Start in Download mode
* Plug usb cable
* When you see a number under COM into odin is add, clic on Start
edzamber said:
* Extract Rom file.tar.md5 from Rom zip on your desktop with Winrar
* Open Odin as administrator
* In case of one single AP file, clic on AP into Odin and add AP file to load in
* Wait until odin load AP file
* Start in Download mode
* Plug usb cable
* When you see a number under COM into odin is add, clic on Start
Click to expand...
Click to collapse
ODIN said that it passed, but now it only turns on when plugged in and when it is plugged in it is stuck in a sequence of: samsung s6 edge logo, blue screen with android logo, turn off. and then repeats over and over, i am able to go into download mode though
Go in recovery and wipe factory reset.
edzamber said:
Go in recovery and wipe factory reset.
Click to expand...
Click to collapse
i cant get into recovery mode i dont think, i can only get into download mode. And i cant turn it on when it isnt plugged in and i cant turn it off when it is
UPDATE: got into recovery mode and factory reset. thank you so much, your a lifesaver! if i get money in the near future i will be donating!!!!
I rooted my phone using odin3 then tryed to flash the sdk23 arm64 xposed framework using flashify
Now im stuck on the samsung word logo 'boot loop' and i don't know how to fix it:crying:
Also have a custom recovery [TWRP]
now i think i broke it :crying: i cant get into the recovery mode i dont why but i went to advance wipe and check all of it
also now doesnt do to the samsung word logo it stays on the samsung galaxy s6 powered by android screen
also when charging no green is seen just a empty battery with lighting bolt
plus KERNEL IS NOT SEANDROID ENFORCING in red in the top left corner.
Think i basicallly wiped everything ohno
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
es0tericcha0s said:
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
Click to expand...
Click to collapse
i am able to get to download mode (odin mode right?), now how do i reinstall the original firmware? (maybe link me some steps)
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
es0tericcha0s said:
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on the phone says
SECURE CHECK FAIL : (BOOTLOADER)
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
es0tericcha0s said:
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
Click to expand...
Click to collapse
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed
i used a file G920IDVU3EPEA_G920IXSA3EPEA_G920IDVU3EPEA_HOME.tar.md5
pretty sure its the right one, the sticker on the back of my phone says its SM-G920I
This fail doesnt have the SECURE CHECK FAIL : (BOOTLOADER) on the phone
Also 'An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software' appears on the phone screen
Never Mind i fixed it i just had to use a differnt cable, think my cable was broken.
Cant get into the recovery mode (hold down the volume up, home and power button at the same time) right?
did a factory reset in recovery mode still have a bootloop
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
xKyono said:
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
Click to expand...
Click to collapse
:good::highfive::victory: