hello
S3 stuck at boot - samsung logo and i cannot enter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
ancilary said:
hello
S3 stuck at boot - samsung logo and i cannot enter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
Click to expand...
Click to collapse
Put ur fone in download mode first. Then connect ur fone to the cpu thru the usb ports at the back of the cpu.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
ancilary said:
hello
S3 stuck at boot - samsung logo and i cannot enter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
Click to expand...
Click to collapse
Download Firmware Go TO (Samfirmware.com/Sampro.pl)
Download Samsung USB Driver(Download In Google)
Enter To Download MODE
And Download ODIN(Download In Google)
PLUG IN USB TO U PHONE
In Square Detect U Phone (Com:2)etc
SelectPDA>Firmware.md5
and START
Wait 5Minute And in SQUARE PASS
REMOVE U CABLE AND TARAAA U PHONE NORMALY :good:
ancilary said:
hello
S3 stuck at boot - samsung logo and i download.odenter recovery mode too
but i can enter download mode but phone is not showing up in odin , i have installed kies for drivers
but still phone not showing up in odin
Click to expand...
Click to collapse
Download Samsung drivers and unzip it to yr desktop, connect yr ph in download mode. Go to device manager in yr pc,u will probably see a triangle with ! , update yr drivers, click on let me choose and point to the drivers and reinstall it. Then open Odin Cheers!
JellyYogurt said:
Put ur fone in download mode first. Then connect ur fone to the cpu thru the usb ports at the back of the cpu.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
VerlyAnanda said:
Download Firmware Go TO (Samfirmware.com/Sampro.pl)
Download Samsung USB Driver(Download In Google)
Enter To Download MODE
And Download ODIN(Download In Google)
PLUG IN USB TO U PHONE
In Square Detect U Phone (Com:2)etc
SelectPDA>Firmware.md5
and START
Wait 5Minute And in SQUARE PASS
REMOVE U CABLE AND TARAAA U PHONE NORMALY :good:
Click to expand...
Click to collapse
ndmuni said:
Download Samsung drivers and unzip it to yr desktop, connect yr ph in download mode. Go to device manager in yr pc,u will probably see a triangle with ! , update yr drivers, click on let me choose and point to the drivers and reinstall it. Then open Odin Cheers!
Click to expand...
Click to collapse
hello
its showing in odin from back cpu port but i cannot install any kernel or firmware it is giving pit error
phone details
MODEL : GT-i9300
FCC ID : A3LGTI9300A
SSN:-I9300GSMH
can u tell me where can i find stock pit and firmware for this model?
ancilary said:
hello
its showing in odin from back cpu port but i cannot install any kernel or firmware it is giving pit error
phone details
MODEL : GT-i9300
FCC ID : A3LGTI9300A
SSN:-I9300GSMH
can u tell me where can i find stock pit and firmware for this model?
Click to expand...
Click to collapse
Should work without PIT so just try again There are many guides in XDA on how to flash stock fw with Odin.
Perka said:
Should work without PIT so just try again There are many guides in XDA on how to flash stock fw with Odin.
Click to expand...
Click to collapse
bro its saying some pit error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Why did you end up in bootloop?
Also there's a thread for PIT
Sent from my GT-I9300 using xda app-developers app
ancilary said:
hello
its showing in odin from back cpu port but i cannot install any kernel or firmware it is giving pit error
phone details
MODEL : GT-i9300
FCC ID : A3LGTI9300A
SSN:-I9300GSMH
can u tell me where can i find stock pit and firmware for this model?
Click to expand...
Click to collapse
careful when using pit
ancilary said:
bro its saying some pit error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
DeSelect Re-partion
Perka said:
Should work without PIT so just try again There are many guides in XDA on how to flash stock fw with Odin.
Click to expand...
Click to collapse
Perka said:
Why did you end up in bootloop?
Also there's a thread for PIT
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
phone automatically stopped and this happened
ndmuni said:
careful when using pit
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
ancilary said:
phone automatically stopped and this happened
Click to expand...
Click to collapse
So you did nothing, and then it went in to bootloop?
Does it's show product name on Odin mode in download mode? If it's blank there, it's means that you have got SDS and you need motherboard replacement.
Perka said:
So you did nothing, and then it went in to bootloop?
Click to expand...
Click to collapse
Simonna said:
Does it's show product name on Odin mode in download mode? If it's blank there, it's means that you have got SDS and you need motherboard replacement.
Click to expand...
Click to collapse
after reading supersu thread i found out that i have half SDS
is there anyway to fix it ourself?
No, warranty repair or new motherboard required.
Sent from my GT-I9300 using Tapatalk
Related
Hello, unfortunately my phone took the opportunity to have the power button jam and cause it to loop on and off whilst it was charging for roughly 7 hours. The phone now hangs at the "Samsung Galaxy SIII" Screen.
I've tried flashing a stock rom via Odin , however i get the error "There is no PIT parition."
Is there any other workaway around this?
I have read around the forum and tried different usb ports but to no avail.
Are you sure you didn't tick to use PIT?
If not, your partition table may be broken and you'll need the one on samfirmware.com to revive it.
Sent from my GT-I9300 using xda premium
Where can i get the partition table at samfirmware.com?
It it in the forums or somewhere on the front page? I can't seem to find it sorry.
Would i also just re-partition it with the PIT file on Odin?
Hello! I have found the partition file for the 16gb Galaxy S3 however i receive a new error.
It says :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
How do i fix this? Thank you and sorry.
If it was the correct PIT file used then it looks like either a JTag repair ( cheaper) or a service centre repair .
jje
Riionten said:
Hello! I have found the partition file for the 16gb Galaxy S3 however i receive a new error.
It says :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
How do i fix this? Thank you and sorry.
Click to expand...
Click to collapse
try to fix with 3part firmware and tick re-partition use the pit file that comes in the package.
download it here http://narod.ru/disk/51312212001.a4.../I9300XXALEF_I9300XXLEF_I9300OXEALE4.rar.html
Just tried to use the 3 part firmware.
I still get the PIT error.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALEF_611327_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLEF_REV02_REV04_CL1147871.tar.md5 is valid.
<OSM> CSC_OXE_I9300OXEALE4_CL606160_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
--------------------------------------------------------------------------
What is a JTag and where can i have my phone repaired? Sorry still a beginner.
Here: http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
Two seconds to Google There may be others, search
NEVER tick repartition again
Sent from my GT-P6810 using xda premium
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
maybe you are right but i have never encountered this. i have usually been forced to S1 and S2 after wrong bootloader writting. they could not be booted so had to fix them via jtag.
---------- Post added at 04:56 PM ---------- Previous post was at 04:24 PM ----------
if you are skillfull enough you can try this http://forum.xda-developers.com/showthread.php?t=1731255
you will need another same phone and the multiple tars that i told you to download.
bear in mind that i will not be held responsible for any further damage if any occurs,
i have not made this nor i have tried it. this absolutely Samsung made. if you feel that it is over your head DO NOT TRY IT!!!!!!!!!!!!
UpInTheAir said:
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
Click to expand...
Click to collapse
That's true, but in extremely rare cases that happened
beginner : phone hang at samsung galaxy siii gt-19300
hye please help..i didnt do anything to my phone. it hang at samsung logo even after vol up + home + power..please help me...
up here! same happend to a friend, and nothing working, any ideas?
javituh said:
up here! same happend to a friend, and nothing working, any ideas?
Click to expand...
Click to collapse
JTag repair is cheaper than a service centre repair .
jje
UpInTheAir said:
Not necessarily true. If you have nand rw corruption, it can still be possible to enter dl mode, but require jtag.
Sent from my GT-P6810 using xda premium
Click to expand...
Click to collapse
@up in the air
hi! can i directly flash the boot recovery file thru odins selecting it in "bootloader" option? as i have a SIII which just boots till samsung galaxy sIII and thats all never went front! it does go in boot-loader mode, but not in recovery mode!
i did a reset userdata and cache thru recovery when i forgot my pattern lock, since then its not booted! ive tried everything, bbut the problem is still the same!
and when u boot the phone in boot-loader mode to flash with odin i get these;
"
odin mode
product name: gt-19300
custom Binary download: yes (7 counts)
current Binary: samsung official
system status: custom
"
pls share any new solution's to fix these kind of problems! iam having sleepless nights due to this!
WBR
ReyTech.
ReyTech said:
@up in the air
hi! can i directly flash the boot recovery file thru odins selecting it in "bootloader" option? as i have a SIII which just boots till samsung galaxy sIII and thats all never went front! it does go in boot-loader mode, but not in recovery mode!
i did a reset userdata and cache thru recovery when i forgot my pattern lock, since then its not booted! ive tried everything, bbut the problem is still the same!
and when u boot the phone in boot-loader mode to flash with odin i get these;
"
odin mode
product name: gt-19300
custom Binary download: yes (7 counts)
current Binary: samsung official
system status: custom
"
pls share any new solution's to fix these kind of problems! iam having sleepless nights due to this!
WBR
ReyTech.
Click to expand...
Click to collapse
You can flash stock recovery through Odin - PDA
OR
BACKUP data to PC and flash full firmware package with Odin. Follow Intratech guide here : http://forum.xda-developers.com/showthread.php?t=1671969
You can download firmware packages from XDA (Intratech etc), samsung-updates.com or samfirmware.com
Then re-root and flash CWM recovery
Sent from my GT-I9300 using xda premium
mariosraptor said:
Try to use also another Odin version such as 1.85 and make sure nothing frome Kies is running in the background. No need for jtag. Your phone is not dead as long it enters download mode.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
You sir took away a lot of my worries!!! because i already was thinking about just buying a new s3, but it does enter download mode, so YES there is hope! :laugh: (it is more of histarical laugh, but yes hope indeed)
---------- Post added at 09:30 AM ---------- Previous post was at 09:19 AM ----------
UpInTheAir said:
You can flash stock recovery through Odin - PDA
OR
BACKUP data to PC and flash full firmware package with Odin. Follow Intratech guide here : http://forum.xda-developers.com/showthread.php?t=1671969
You can download firmware packages from XDA (Intratech etc), samsung-updates.com or samfirmware.com
Then re-root and flash CWM recovery
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I really tried to figure out how but got stuck, how exactly do you put your phone into stock recovery mode trough odin?
George1195 said:
You sir took away a lot of my worries!!! because i already was thinking about just buying a new s3, but it does enter download mode, so YES there is hope! :laugh: (it is more of histarical laugh, but yes hope indeed)
---------- Post added at 09:30 AM ---------- Previous post was at 09:19 AM ----------
I really tried to figure out how but got stuck, how exactly do you put your phone into stock recovery mode trough odin?
Click to expand...
Click to collapse
You don't need to get into recovery when using Odin. You need download mode. But any search would have clarified that
Power off and press :
Vol down + home + power (keep depressed until download mode)
Same for recovery (Vol up instead)
Sent from my GT-I9300 using xda premium
UpInTheAir said:
You don't need to get into recovery when using Odin. You need download mode. But any search would have clarified that
Power off and press :
Vol down + home + power (keep depressed until download mode)
Same for recovery (Vol up instead)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I think his problem is that he can't enter recovery, he can only enter download mode. He's asking if there's a way he can enter recovery mode through Odin (by flashing it?) not the other way around.
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
harpal singh said:
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
Click to expand...
Click to collapse
ODIN REPORT.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Y r u using .pit file?
domnic79 said:
Y r u using .pit file?
Click to expand...
Click to collapse
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
harpal singh said:
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
Click to expand...
Click to collapse
No. From where did u get the multi package firmware?
recovery problem wid ace cream v.1
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
dylan.james1947 said:
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
Click to expand...
Click to collapse
Download stock firmware from HERE & flash it. Do not use .pit file.
domnic79 said:
No. From where did u get the multi package firmware?
Click to expand...
Click to collapse
no it is not a multi package firmware.... it is one file packege.... .S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5
and i put it in PDA section
thaks
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
thanks man your help it is back to normal:good
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
I have a very similar problem. I tried to flash a ROM on my ace-i and got stuck at the boot logo. I cant get into recovery mode. The download mode works fine so, I tried to flash the stock rom using odin but the phone is not even connecting, I think it is because I have USB debugging off on the phone. I am not sure what to do! I have attached a pic of what i have done on odin. I know the ID:COM thing should be yellow but its not! I have the USB driver also installed!
Galaxy Ace Not entering Recovery mode
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
RamEEz said:
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
Click to expand...
Click to collapse
Go into download mode and flash stock rom using Odin.
Sent from my iPad using Tapatalk - now Free
Envy-X said:
Go into download mode and flash stock rom using Odin.
Click to expand...
Click to collapse
Did that., tried a few different ones as well. downloaded them from samfirmware, still its locked.
i was flashing to this rom http://forum.xda-developers.com/showthread.php?t=1891384
got stuck at booting with logo and yellow traingle
tried to resotore my backup rom got stuck also on the same logo
so i was trying to flash stock rom with odin 3.4
PHP:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
and then got stuck at the download mode and go anywhere tried to remove the battery but it opens
on a screen with a ( mobile ... yellow triangle .. PC )
Odin can still see the mobile , i can provide any other requested info
Post your phone details. Model, android version and baseband.
Sent from my GT-I9100 using xda app-developers app
Wagih El-Bedeawy said:
i was flashing to this rom http://forum.xda-developers.com/showthread.php?t=1891384
got stuck at booting with logo and yellow traingle
tried to resotore my backup rom got stuck also on the same logo
so i was trying to flash stock rom with odin 3.4
PHP:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
and then got stuck at the download mode and go anywhere tried to remove the battery but it opens
on a screen with a ( mobile ... yellow triangle .. PC )
Odin can still see the mobile , i can provide any other requested info
Click to expand...
Click to collapse
just go to www.sammobile.com and dwnld the stock firmware meant for I9100G and then flash the same using ODIN and see
ps- first try to flash a stock kernel meant for I9100g and see
HAXTREME said:
Post your phone details. Model, android version and baseband.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
GT-I9100G
2.3.6 stock rom
baseband dont know
and this is the version i m trying to flash "GT-I9100_XSG_I9100JPKH1_I9100XXKG5_I9100OJPKH1.tar"
Wagih El-Bedeawy said:
GT-I9100G
2.3.6 stock rom
baseband dont know
and this is the version i m trying to flash "GT-I9100_XSG_I9100JPKH1_I9100XXKG5_I9100OJPKH1.tar"
Click to expand...
Click to collapse
AFAIK that stock firmware is meant for I9100 not the I9100G
ps- if u install any rom/kernel meant for I9100 and its variants like M/P/T on ur I9100G u will hardbrick ur phone for sure, since I9100G is very diff from the above ones in Hardware
You're lucky youre only in a boot loop coz that sounds like an i9100 ROM not i9100G. As long as Odin is detecting your phone you should be able to flash a stock ROM for the G variant.
Sent from my GT-I9100 using xda app-developers app
thanks all now i got out of the download mode and i got stuck on the boot loop
but i can manage things from here thanks :good:
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Spacedementia87 said:
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Click to expand...
Click to collapse
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah I know,
I made sure to download the correct file
Spacedementia87 said:
Yeah I know,
I made sure to download the correct file
Click to expand...
Click to collapse
Try running as an administrator if you have done that try Odin v 1.85.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
Yeah, I am running as admin.
I will try 1.85 now.
Thanks
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Spacedementia87 said:
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300 << also what does it say on your screen when you are in download mode.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
JJEgan said:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Click to expand...
Click to collapse
This the the file I am trying:
I9300XXEMD2
Should be ok. I am on three.
I have looked in the task manager and can't see any reference to Kies on there. I guess I could uninstall just in case.
What is very worrying now is that I just tried to flash again using ODIN 3.04 and it said I needed a .pit file to repartition. Re-partition is not checked so I don't know why it is asking for this.
tallman43 said:
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> << also what does it say on your screen when you are in download mode.
Click to expand...
Click to collapse
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Spacedementia87 said:
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Click to expand...
Click to collapse
Sorry Yes :crying: I think you need service damaged partition..
tallman43 said:
Sorry Yes :crying: I think you need service damaged partition..
Click to expand...
Click to collapse
How do I do that?
Spacedementia87 said:
How do I do that?
Click to expand...
Click to collapse
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
tallman43 said:
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
Click to expand...
Click to collapse
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Yes search the forum .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
tallman43 said:
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Click to expand...
Click to collapse
Well thanks for the help.
I think I will take it in to get it fixed. I had the screen die on me not so long ago and had to take it in for a replacement screen then, so this is a little frustrating.
Oh well
Thank you very much