Related
Hi Everyone,
Need help with my I9100 which doesn't boot. I got this phone yesterday and was using it fine. Today i installed Kies and it prompted to upgrade firmware. I researched and found that it had improvements in battery life and decided to go for it. It downloaded the firmware and everything went fine until it prompted saying firmware upgrade failed and asked me to do firmware emergency recovery.
I googled to see more info regarding this error and couldnt get much information. Decided to go ahead with recovery as instructed. Again i got error " Firmware emergency recovery stopped due to GT-I9199 error". If the problem persistes please contact samsung service center.
Please suggest if this is recoverable error and any links to proceed and have a working phone.
Currently when i power on, i get a logo of phone connected to PC with yellow bang in middle. Any pointers much appreciated....
Thanks.
Don't worry, I think you can fix this yourself using ODIN. I mean, flash a custom rom through Download mode. (Turn the phone off, hold Volume Down + Home + Power for 4 seconds)
In this mode you can flash any kind of rom without doing your phone any harm. Just go to the Rom Development forum and choose your rom. I suggest Lightning Rom, because it uses ODIN, and has a very well-explained tutorial.
You can also flash a stock rom, you can get it from the Stock Rom thread, and flash that through ODIN.
Or get it fixed by Samsung and wait two weeks. (where they use exactly the same program, ODIN, to reflash the stock rom)
Look here
And here
And finally here
If all that doesn't work, take it back to samsung.
Also, KIES is a PoS, use Odin in future
Yep, KIES may look all official and reliable, but it actually seems to brick some SGS2's.
Thanks for the info's. Will try them and update soon.
No luck. I tried multiple times to update ROM using ODIN in download mode. Everytime it says NAND write operation failed and comes out. I am searching to see if any other option left before i take it back to samsung
Don't forget to try it with a different computer. Sometimes it's not the phone, it's the PC or the USB port.
Also, you can try flashing with Heimdall instead of Odin.
First of all;
Yellow triangle means you are running custom kernel/rom.
Press home+volume down and then power, to get into download mode , on your phone. If that works, take battery out, to stop it.
Go to:
Samfirmware.com
Download firmware from there. It is a rar file, I think. Open rar file to see what is in. 5 files? The biggest file has all of the other files in it.
Install via Odin. Select pda in Odin and select the biggest file from the rar.
Put your phone into download mode, connect usb and run Odin.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
Make sure that all kies processes are closed or odin will fail.
Sent from my GT-I9100 using XDA Premium App
Keis? Hmm.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
it gets worse...
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
mightygoose said:
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
Click to expand...
Click to collapse
You can buy a usb jig, specially designed to put you phone into download mode. Search for it on ebay. Take the battery out, plug in usb jig, replace battery and it should boot into download mode. If it does not, then the phone is dead.
Sent from my GT-I9100 using xda premium
Having recently installed a miui rom, i found that my phone has become brocked. I can go to dwonload mode, and I can turn it on but there is only a blank screen. Does anyone know how to unbrick it?
Thanks
go into download mode open up ODIN and flash a stock ROM. Simple as that.
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
nikkox988 said:
you should buy a jig to get download mode. Did you tried recovery mode ?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
He said he can access Download mode which means he can flash a stock ROM and all will be good.
I can't seem to go into recovery mode
thealmightysaj said:
I can't seem to go into recovery mode
Click to expand...
Click to collapse
to get recovery get into download mode open Odin and flash CF-Root Kernel and then try to get into download mode that way.
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
thealmightysaj said:
I flashed the CF Root Kernel (XW_CLK_KF3), but it failed in Odin
Click to expand...
Click to collapse
are you flashing it through PDA? Just checking I didnt on accident once. Also try just flashing a stock ROM.
http://forum.xda-developers.com/showthread.php?t=1224423
onli flashing pda wont work i thinkk... you may need to repartition
go to http://androidflip.com/android-2-3-4-gingerbread-xxkg3-firmware-update-for-samsung-galaxy-s2/
flash it by repartitioning
download the package in it. it worked for me
Where can I find the stock ROM for a Bell Samsung GS2?
try samfirmware.com
they have all of the official released firmwares based on geographical region.
or
http://forum.xda-developers.com/showthread.php?t=1075278
I have unbricked my phone but i can't access the android market, everytime time i open up the app it closes
my t-mobile galaxy s2 is dead after ICS upgrade failed
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
If you can't get into download mode (home/power/volume down), only thing you can try before you send it back to Samsung or get it JTAG repaired is a jig, which unfortunately is unlikely to work. Still worth a try tho.
hbarri said:
i am noobi. my galaxy s2 went through 2 stages before becoming dead.
1. i tried to flash I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar using odin. it got stuck in connection mode. then failed. when rebooted the phone, i got a message "firmware upgrade encountered an issue".
2. now, odin still sees it. I tried different ROMs then the phone becomes dead. the phone is dead even after pressing the vol up+vol dn or any other key combination.
Now, windows 7 reports driver error when connecting the phone via usb. Linux sees the Qualcom modem, but heimdall failed to detect the phone. Any suggestion beside throwing my phone in trash is appreciated.
Click to expand...
Click to collapse
Try uploading a stock kernel first, then try uploading the rom
Do we have to have a jig?
Help me fix my fully bricked i9100
I have flashed the wrong Roms and firmwares in my Samsung galaxy s2 i9100 for several times now my phone doesnt go to the recovery mode. It only goes to the download mode but re flashing the correct new roms and firmwares, nothing actually works! I tried those
Odin shows only FAIL !! when I flash new roms..I ve tried so many roms so far but it only fails
what do I do now??
Try http://sammobile.com for the firmware.
Sent from my GT-I9100 using Tapatalk 2
Samsung Galaxy S2 SPH-D710
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
XraidedX2 said:
Looking for any kinda help...
Tried rooting the above mentioned phone with:
http://forum.xda-developers.com/showthread.php?t=1721229
the odin came back failed. I unpluged and when the phone started it said: Firmware Upgrade encountered an issue. Please select recovery in kies & ... so on..
I can only get into odin donwloading....
The PC is not recognizing the phone either..
Help if you can... Its greatly appreciated...
Thanks,
Click to expand...
Click to collapse
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your sock rom again using samfirmware.com
6.Done
Hi All,
I have just recently bought a Korean SG II (M250S). On trying to root (actually trying to flash an insecure Kernel) the phone using ODIN (tried 1.85 as well as 1.83) I am running into a problem where if I connect my phone while its turned on then it is recognized by ODIN (Com port is displayed and all) but if I put my mobile is downloading mode then ODIN doesnt recognise it. I have tried everything and have read through the forums here on XDA as well but havent been able to find a solution to this problem. Help would be appreciated.
And before anyone asks, I have also tried killing Kies Tray Agent before running ODIN but still havent had any luck. Since the phone gets recognized by ODIN while its turned on (and also detected by Kies when its on) I am guessing its not a drivers issue but something else.
In the downloading mode it doesnt really say Downloading, rather some other characters (I am guessing Korean) are displayed. Is that normal for Korean SG II's ?
How to use ODIN.
Open Odin select file to flash.
Boot download mode .
At first screen press Vol up to proceed .
Connect usb cable
Flash via Odin start tab
jje
Thanks Buddy, the Vol up button did the trick.
I actually had a Galaxy S before this and in that I didnt have to press the Vol Up after going into Downloading Mode hence the confusion .
I was worried for a while that I was stuck with something that I could not root ...thanks a million.
I was in download mode and attempted to odin back to stock and it failed. see screenshot attached. Now my phone is stuck on the little cell phone and computer symbol connected by a triangle in between. its the same as shown in this video.. .Now I cant get it to download mode...
Any help would be appreciated... .
phone is stuck at the symbol shown in the start of this video
http://www.youtube.com/watch?v=9nMCBbdAcHU
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
wkenworthy10 said:
Had this same problem recently. What I did was try to put it in download mode again by holding the up and down volume keys and plugging in the cable, it would show up as the icon as you mentioned but the computer would recognize it to be in download mode. I would then use odin like normal. Are you sure you are using the correct .pit and .pda file just in case?
Click to expand...
Click to collapse
So I used another computer this time....still had that computer and cell phone icons on the screen...but as you said ...i just opened AIO tool and used odin to flash it to stock..it worked this time...and once done... i checked the phone which was working and quickly rooted and installed a FROYO custom rom.
thanks again
stuck at samsung vibrant screen after flashing with odin
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
jonna19 said:
i have a problem, can anyone help me plss. my phone got stuck at samsung vibrant screen after flashing it back to stock using odin. i keep repeating the flashing many times, it was successful i think because it says pass so i keep it still and not removing the usb plug until my phone turns on but then my phone stuck at samsung vibrant screen ..huhu what to do? plss help me guyss
Click to expand...
Click to collapse
Use this to go to download mode and flash with Odin again.
http://forum.xda-developers.com/showthread.php?p=48458994
Sent from my SGH-T959 using xda app-developers app
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
dorian_nadaud said:
Hello everyone, it's with a great thrill that I found a couple of days back the existance of the beautiful wackyrom available on your forum.
After considering it I took willingly the risk of installing it... and following all indications of flashing cwm via odin and wiping all for of data in the proper oder, I got myself stuck in a pretty unpleasant situation : CMW recovery loop. I tried to start from scratch again and again and I even tried to go back on the stock firmware (which wasn't the original french one installed on my phone but a foreign one). I know I may have made a newbie mistake, but seeing the strength of your helping community Im hoping to revive what now looks more to me like a brick phone than ever. In advance, I thank all attention and anwsers to my case.
Click to expand...
Click to collapse
Flash this Stock recovery via odin : http://d-h.st/hcA
Instruction:
1) Put phone in download mode by powering off ,home button and volume down while plugging the phone into the computer(if don't and don't understand search google their are many guides and videos for it)
2) You should now see the first square in Odin turn yellow and say "Ready"
3) Click on the pda tab in Odin and select the Stock_Recovery_GT-I8552.tar you downloaded
4) Click start and wait for your phone to reboot
5) Done!
Well, I should have added that to the list of things that I have tried before. The only divergence to your methode is the fact that the keys to force start the downloading mode does not work so I only can acces it thrue a restart in downloading mode within CWM...
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
my GT-i8552 stuck in cwm boot looping
dorian_nadaud said:
I have wiped all pilots/kies traces off my computer, checked rooting of the phone using kingo android root, reinstall my drivers from scratch and yet Odin still dont recognise it.. Does anyone have a clue?
Click to expand...
Click to collapse
I also have the same problem. I have read all threads from google about this matter, that say flash rom, clear whatever2, blaz bla
BUT, still for 3 days I cant fix it. when it stuck in boot looping or turn off, odin didnt recognise my phone
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Also: if Odin don't recognize your phone, try to change your usb cable
Changing PCs worked for me a while back.
not working
devesh9 said:
Dear friends,
Install Samsung kies and it will install all the proper drivers for your phone.
Then use another port of your pc or laptop to connect with odin.
If changing your pc ports doesn't work then try to install kies on another pc perhaps.
After the phone gets connected to pc follow @lols21.10 instructions.
Worth a try.
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
hi, i have install kies and odin. but with problem of cwm boot, pc/ odin/kies cant recognize my i8552 since it need to be turn on in normal mode. i have tried with another cable and port, as well as from pc to laptop, but still not recognize. pls help me
Does Odin recognize your phone when in download mode?
freitaz said:
Does Odin recognize your phone when in download mode?
Click to expand...
Click to collapse
not either. because my phone need to be turned on in normal mode when connect to my pc, then i need to choose the usb option whether to transfer files/camera/charging.
and only then Odin say "ready"
Do this: put your device in download mode and then you reflash firmware with Odin.
You can do this by turning your phone on pressing the buttons HOME, POWER and VOL DOWN. When your phone vibrates, release POWER and keep pressing ther other two. A screen with a warning will appear, and you press VOL UP to confirm. After that, you open Odin, plug your phone on computer and select the stock firmware by clicking on button "PDA" at Odin. And then it is just start and wait.
Same Problem
my samsung grand quattro get stuck at cwm too.. it keep booting to recovery mode when phone start up, I cant connect to Odin because I cant access to debugging setting.. HELP PLEASE :crying: