Hi, I'v flashed my I9003 with Project chaos 4.1.2 (very stable and beautiful) but data connection doesn't function. It's set in right mode. Help me!!! Thanks
gentleo said:
Hi, I'v flashed my I9003 with Project chaos 4.1.2 (very stable and beautiful) but data connection doesn't function. It's set in right mode. Help me!!! Thanks
Click to expand...
Click to collapse
what was the firmware on your phone before you flashed this?
sriram231092 said:
what was the firmware on your phone before you flashed this?
Click to expand...
Click to collapse
i9300xxemc2
gentleo said:
i9300xxemc2
Click to expand...
Click to collapse
since the rom you flashed is based on MG5 latest release, it changes efs partition into a new format.
1st simple step: check your apn settings.
is your imei okay?
if yes, then flash stock MG5 via odin and then root it and flash the same rom via mobile odin.
quildsy band
sriram231092 said:
since the rom you flashed is based on MG5 latest release, it changes efs partition into a new format.
1st simple step: check your apn settings.
is your imei okay?
if yes, then flash stock MG5 via odin and then root it and flash the same rom via mobile odin.
Click to expand...
Click to collapse
My APN is ok. What do you meann flash stock Mg5 via odin etc...
Yesteray I did the same...I've rooted my phone, I've flashed Porject Chaos 4.1.2 via odin...I don't understand well...
gentleo said:
My APN is ok. What do you meann flash stock Mg5 via odin etc...
Yesteray I did the same...I've rooted my phone, I've flashed Porject Chaos 4.1.2 via odin...I don't understand well...
Click to expand...
Click to collapse
Fail to read the basics before flashing do nothing now until you actually understand .
http://forum.xda-developers.com/showthread.php?t=2393289
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts
Maybe I understand that I have an other EFS and so I should flash again my phone with EFSv2 baseband???
READ READ READ .
http://forum.xda-developers.com/show....php?t=2393289
If you have ever flashed XXEMG* (or newer) ROM, to keep your IMEI working, you must:
Stay with the EFS v2 basebands (MG* or newer). You may flash other ROMs but must return to the MG* (or newer) baseband
Restore your EFS backup (taken before XXEMG* or newer ROM install) to use older (EFS v1) basebands. EFS backup must be an EFSv1 backup to use an EFS v1 baseband
If the above don't work, consider sending for repair
Related
Hey, I just flashed latest 4.1.2 in my I9300 and after that When i flashed 4.2.2 XUFME7 I have the error "Emergency calls only", I think it`s probably from my baseband, probabily it modified my efs (being a new baseband, new format), so when I go to 4.2.2 which probably has a old baseband I get that error, my question is "Can I flash the latest baseband in 4.2.2?", If yes, how can I do that, is anyone have the latest baseband, can someone help me?
Can I flash the latest 4.1.2 baseband in 4.2.2? Where can I find this baseband?
Yes, you can find the XXEMG4 modem in general section
And efs and ROM itself are separated 2 parts, doesn't effect on each other except RIL but it's not big deal.
Main goal is related with EFS, if you have old EFS backup (before XXEMG4 ) then you can use any older modem as long as you want, of course you have to restore the old efs backup to make it compatible.
And if sadly you don't have old efs backup, you can still stick with XXEMG4 or higher modem, just flash modem after you flash ROM then you will be fine
Sent from my GT-I9300 using xda premium
Ok, but where exactly can I find xxemg4 modem flashable in odin? Cuz I don`t have a backup to my efs folder.
No efs bkup and you started flashing roms..o dear. Flash mg4 zip through recovery not odin. You need to read alot more before you break you phone
--------------
alliances+siyah
andrewwright said:
No efs bkup and you started flashing roms..o dear. Flash mg4 zip through recovery not odin. You need to read alot more before you break you phone
--------------
alliances+siyah
Click to expand...
Click to collapse
I don`t need a CWM recovery to do that?
bett3rthan said:
I don`t need a CWM recovery to do that?
Click to expand...
Click to collapse
Yes. Flash philz recovery through odin then you will have cwm
--------------
alliances+siyah
andrewwright said:
Yes.
--------------
alliances+siyah
Click to expand...
Click to collapse
Ok, but is there any way of doing that without rooting my phone? And if i flash philz recovery is this means I will change my kernel also?
As above but why not just root it. You've just flashed a leaked firmware so why not root
--------------
alliances+siyah
---------- Post added at 11:18 AM ---------- Previous post was at 11:17 AM ----------
bett3rthan said:
Ok, but is there any way of doing that without rooting my phone? And if i flash philz recovery is this means I will change my kernel also?
Click to expand...
Click to collapse
No,kernel and recovery are separate. I have siyah kernel and philz recovery. Edit..just to add there is no custom kernel for 4.2.2 leak.
--------------
alliances+siyah
So, if I flash philz recovery with odin it will root my phone also? I don't mind rooting it, but I mind changing my kernel. Also, can I flash philz recovery when useing 4.2.2 stock rom? And believe me I used 4.2.2 XUFME7 stock rom.
try this go ahead and use odin but flash the leak again. yes reflash it but replace the baseband with any mg4 or mg2 that you like. sometimes flashing just the baseband wont work but flashing it as part if a rom will . the best thing imo is to just flash a stock rom from sammobile that uses an mg4 or mg2 baseband
No if you flash philz it wont root it but there is a zip to flash in philz thread. And no it wont change the kernel and yes you can use philz with 4.2.2
--------------
alliances+siyah
Hello, you're out of topic, I know what I have to do, but I don't find anyware a xxemg4 modem flashable in odin, I want that so I can update my phone back to 4.2.2 XUFME7. Now my questions are those from the above.
andrewwright said:
No if you flash philz it wont root it but there is a zip to flash in philz thread. And no it wont change the kernel and yes you can use philz with 4.2.2
--------------
alliances+siyah
Click to expand...
Click to collapse
So that means I don't have to root to solve my problem, right? I just have to flash philz?
Correct. Cwm is the key. Then you can flash the zip.
--------------
alliances+siyah
andrewwright said:
Correct. Cwm is the key. Then you can flash the zip.
--------------
alliances+siyah
Click to expand...
Click to collapse
Can you give me a link to a correct zip please...
Philz 5.11.2 is what you want.
--------------
alliances+siyah
Can anyone please help me on how to revert my se i9300 to stock 4.1.2?i got issues when i update to 4.3..it got lags and battery drains quickly.i think my unit came from a european country my build number is: I9300XXUGMK6..Can i flash a 4.1.2 philippine stock firmware without problems via odin?please help me on this matter..thanks in advance..
luenboy said:
Can anyone please help me on how to revert my se i9300 to stock 4.1.2?i got issues when i update to 4.3..it got lags and battery drains quickly.i think my unit came from a european country my build number is: I9300XXUGMK6..Can i flash a 4.1.2 philippine stock firmware without problems via odin?please help me on this matter..thanks in advance..
Click to expand...
Click to collapse
First backup your efs and yes you can flash stock 4.1.2... but after flashing you won't have any network, then you should restore your efs.. And everything would be good to go.. Backup and Restoring can be done by Phils recovery or ktool from play store...
Sent from my GT-I9300 using xda app-developers app
kunal1540 said:
First backup your efs and yes you can flash stock 4.1.2... but after flashing you won't have any network, then you should restore your efs.. And everything would be good to go.. Backup and Restoring can be done by Phils recovery or ktool from play store...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Are you saying that before i flash the ph firmware,i must root my phone?because ktool needs root permiission for it to work.i cant find phils recovery from playstore..
This forum Original Development for Philz .
Please read the faqs and guides first .
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Guyzz need help...
I have a s3 with german firmware...check screenshots...
so my problem is can i flash indian firmware 4.3 directly on german 4.1.2 via odin or i have to do anything extra...
plz reply me ASAP!
Thanx....
Ashish924 said:
Guyzz need help...
I have a s3 with german firmware...check screenshots...
so my problem is can i flash indian firmware 4.3 directly on german 4.1.2 via odin or i have to do anything extra...
plz reply me ASAP!
Thanx....
Click to expand...
Click to collapse
If you got the I9300 model with no sim lock- no problem.
Ps- notice that if your current build is below EMG4, than your file partition will be changed to EFSv2,
needs to be noticed if you'll try to go back to 4.1.2 afterwards
amirTor said:
If you got the I9300 model with no sim lock- no problem.
Ps- notice that if your current build is below EMG4, than your file partition will be changed to EFSv2,
needs to be noticed if you'll try to go back to 4.1.2 afterwards
Click to expand...
Click to collapse
I think he can go back after flashing 4.3 ROM. I have done that.
Aashish, you can install any ROM as per your requirement if SIM is not locked with any SP.
But there is a chances of loosing IMEI. So please take backup. Search and download MG4 modem handy.
KSKHH said:
I think he can go back after flashing 4.3 ROM. I have done that.
Aashish, you can install any ROM as per your requirement if SIM is not locked with any SP.
But there is a chances of loosing IMEI. So please take backup. Search and download MG4 modem handy.
Click to expand...
Click to collapse
Sorry for noob quesn but what is SP and MG4 modem handy??
KSKHH said:
I think he can go back after flashing 4.3 ROM. I have done that.
Aashish, you can install any ROM as per your requirement if SIM is not locked with any SP.
But there is a chances of loosing IMEI. So please take backup. Search and download MG4 modem handy.
Click to expand...
Click to collapse
Yeah what you propose seems very straightforward BUT it would be advisable to do a full backup INCLUDING EFS, just check the EFS box in TWRP for instance, as it's not usually included in a backup by default.
pjcarrmole said:
Yeah what you propose seems very straightforward BUT it would be advisable to do a full backup INCLUDING EFS, just check the EFS box in TWRP for instance, as it's not usually included in a backup by default.
Click to expand...
Click to collapse
hey...i dont wanna void official status...i.e i dont want to install any custom recovery...i want everything to stay official
Ashish924 said:
hey...i dont wanna void official status...i.e i dont want to install any custom recovery...i want everything to stay official
Click to expand...
Click to collapse
Ah I get it now, in which case I would be tempted to go to an Indian 4.1.2 firmware through ODIN and the update through OTA if that's possible. That would reduce the chase of stuffing up your EFS by using an official Samsung update procedure.
Hello
Yes i have red all the posts about imei regarding i9300.
With me i have a strange case. the problem is i have my phone on 4.3 firmware and took efs backup in all the ways possible.
i can downgrade to any stock firmware.. 4.1.2 4.2.2 too. but i cant update to cm12 or cm 11 because if i did update then my baseband becomes null and there is no imei.
but as soon as i flash 4.3 rom i can have my imei and baseband.
I restored efs backup on cm12 but it had no effect.
Any help here will be accepted.
THank you
Flash modem efsv2
Check if you have efs v2 or v1.
I think you have v1.
If so flash a v2 modem or rom.
coolhof said:
Check if you have efs v2 or v1.
I think you have v1.
If so flash a v2 modem or rom.
Click to expand...
Click to collapse
Thank you for the replay
I fixed it ..
As it turned out the imei did not match the one on under the battery.
Hey ! I installed "" ★[I9300 4.4.4 ROM][13 Dec.] ★ OFFICIAL PORT DN4 from E-team ★ [ Final Version 2014]★"" .. But I have a problem now .. when I want to call someone it gives me not registered on network
please help.
when I dial *#06# it gives me my IMEI
Issam00 said:
Hey ! I installed "" ★[I9300 4.4.4 ROM][13 Dec.] ★ OFFICIAL PORT DN4 from E-team ★ [ Final Version 2014]★"" .. But I have a problem now .. when I want to call someone it gives me not registered on network
please help.
when I dial *#06# it gives me my IMEI
Click to expand...
Click to collapse
Hi!
Dou you have an efs + modem backup from previous rom?
pappt said:
Hi!
Dou you have an efs + modem backup from previous rom?
Click to expand...
Click to collapse
I have Efs.img and Radio.img .
Issam00 said:
I have Efs.img and Radio.img .
Click to expand...
Click to collapse
Is your device carrier unlocked originally? Or unlocked later? (i bet for the second version)
Anyway, try to restore efs and modem, and flash an AOSP/CM based rom (which has no modem.bin or modem.img inside the zip, its important! check it before flash).
If the signal come back, and you can make phone calls, then post your baseband version.
I am having the same issue.I was about to flash Stock firmware via odin.
Before i did a full wipe including internal storage (TWRP).
Now i have official 4.3 firmware with Imei .But Now Network not registered
My device : i9300
Bulid : JSS15J.I9300XXUGNB6
Baseband : :I9300XXUGNA8
PLEASE HELP!
pappt said:
Is your device carrier unlocked originally? Or unlocked later? (i bet for the second version)
Anyway, try to restore efs and modem, and flash an AOSP/CM based rom (which has no modem.bin or modem.img inside the zip, its important! check it before flash).
If the signal come back, and you can make phone calls, then post your baseband version.
Click to expand...
Click to collapse
Thank you so much for your help .. I have a question . do I need to change my Rom or keep it and flash an AOSP .?
Now I installed 4.3 ROM official one and I had the same problem but I flashed these
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
and now it's working well ... i really want that ROM but I can't use my phone without signal .. I don't know what's wrong
XbadaxeX said:
I am having the same issue.I was about to flash Stock firmware via odin.
Before i did a full wipe including internal storage (TWRP).
Now i have official 4.3 firmware with Imei .But Now Network not registered
My device : i9300
Bulid : JSS15J.I9300XXUGNB6
Baseband : :I9300XXUGNA8
PLEASE HELP!
Click to expand...
Click to collapse
You need to flash these patches ..
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
Issam00 said:
Thank you so much for your help .. I have a question . do I need to change my Rom or keep it and flash an AOSP .?
Now I installed 4.3 ROM official one and I had the same problem but I flashed these
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
and now it's working well ... i really want that ROM but I can't use my phone without signal .. I don't know what's wrong
Click to expand...
Click to collapse
So where are we now?
Does your signal came back with the patched modem/kernel combo?
pappt said:
So where are we now?
Does your signal came back with the patched modem/kernel combo?
Click to expand...
Click to collapse
Yes my signal came back because I installed 4.3 and I flashed the Patched_XXUFMJ9_kernel
but I wanna use that ROM but I couldn't fix the problem
Issam00 said:
Yes my signal came back because I installed 4.3 and I flashed the Patched_XXUFMJ9_kernel
but I wanna use that ROM but I couldn't fix the problem
Click to expand...
Click to collapse
the point is don't let the rom installer change the modem:
check in the updater-script file for modem change line, and delete it,
or delete the modem.bin from the zip
or change your patched modem in the zip
and after the rom, flash the boeffla kernel that fits to this rom's android version from here : http://www.boeffla-kernel.de/
i think this is it : http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Stable_kk444/Series%207.x/7.6/boeffla-kernel-7.6-Samsung-i9300.recovery.zip.
pappt said:
the point is don't let the rom installer change the modem:
check in the updater-script file for modem change line, and delete it,
or delete the modem.bin from the zip
or change your patched modem in the zip
and after the rom, flash the boeffla kernel that fits to this rom's android version from here : http://www.boeffla-kernel.de/
i think this is it : http://boeffla.df-kunde.de/sgs3/boeffla-kernel/Stable_kk444/Series%207.x/7.6/boeffla-kernel-7.6-Samsung-i9300.recovery.zip.
Click to expand...
Click to collapse
Yes when I installed that ROM it changed my Modem .. How can I stop it ?
Issam00 said:
Yes when I installed that ROM it changed my Modem .. How can I stop it ?
Click to expand...
Click to collapse
as i wrote before: modifying the updater script in the META-INF\com\google\android\ folder is the easiest way, or replace your patched modem file in the zip
Issam00 said:
You need to flash these patches ..
Patched_BUUGMJ3_modem
Patched_XXUFMJ9_kernel
Click to expand...
Click to collapse
Do i have to flash Custom recovery To apply this patches?
Thankuuuu!
Now i can receive calls.