Hey, I just flashed latest 4.1.2 in my I9300 and after that When i flashed 4.2.2 XUFME7 I have the error "Emergency calls only", I think it`s probably from my baseband, probabily it modified my efs (being a new baseband, new format), so when I go to 4.2.2 which probably has a old baseband I get that error, my question is "Can I flash the latest baseband in 4.2.2?", If yes, how can I do that, is anyone have the latest baseband, can someone help me?
Can I flash the latest 4.1.2 baseband in 4.2.2? Where can I find this baseband?
Yes, you can find the XXEMG4 modem in general section
And efs and ROM itself are separated 2 parts, doesn't effect on each other except RIL but it's not big deal.
Main goal is related with EFS, if you have old EFS backup (before XXEMG4 ) then you can use any older modem as long as you want, of course you have to restore the old efs backup to make it compatible.
And if sadly you don't have old efs backup, you can still stick with XXEMG4 or higher modem, just flash modem after you flash ROM then you will be fine
Sent from my GT-I9300 using xda premium
Ok, but where exactly can I find xxemg4 modem flashable in odin? Cuz I don`t have a backup to my efs folder.
No efs bkup and you started flashing roms..o dear. Flash mg4 zip through recovery not odin. You need to read alot more before you break you phone
--------------
alliances+siyah
andrewwright said:
No efs bkup and you started flashing roms..o dear. Flash mg4 zip through recovery not odin. You need to read alot more before you break you phone
--------------
alliances+siyah
Click to expand...
Click to collapse
I don`t need a CWM recovery to do that?
bett3rthan said:
I don`t need a CWM recovery to do that?
Click to expand...
Click to collapse
Yes. Flash philz recovery through odin then you will have cwm
--------------
alliances+siyah
andrewwright said:
Yes.
--------------
alliances+siyah
Click to expand...
Click to collapse
Ok, but is there any way of doing that without rooting my phone? And if i flash philz recovery is this means I will change my kernel also?
As above but why not just root it. You've just flashed a leaked firmware so why not root
--------------
alliances+siyah
---------- Post added at 11:18 AM ---------- Previous post was at 11:17 AM ----------
bett3rthan said:
Ok, but is there any way of doing that without rooting my phone? And if i flash philz recovery is this means I will change my kernel also?
Click to expand...
Click to collapse
No,kernel and recovery are separate. I have siyah kernel and philz recovery. Edit..just to add there is no custom kernel for 4.2.2 leak.
--------------
alliances+siyah
So, if I flash philz recovery with odin it will root my phone also? I don't mind rooting it, but I mind changing my kernel. Also, can I flash philz recovery when useing 4.2.2 stock rom? And believe me I used 4.2.2 XUFME7 stock rom.
try this go ahead and use odin but flash the leak again. yes reflash it but replace the baseband with any mg4 or mg2 that you like. sometimes flashing just the baseband wont work but flashing it as part if a rom will . the best thing imo is to just flash a stock rom from sammobile that uses an mg4 or mg2 baseband
No if you flash philz it wont root it but there is a zip to flash in philz thread. And no it wont change the kernel and yes you can use philz with 4.2.2
--------------
alliances+siyah
Hello, you're out of topic, I know what I have to do, but I don't find anyware a xxemg4 modem flashable in odin, I want that so I can update my phone back to 4.2.2 XUFME7. Now my questions are those from the above.
andrewwright said:
No if you flash philz it wont root it but there is a zip to flash in philz thread. And no it wont change the kernel and yes you can use philz with 4.2.2
--------------
alliances+siyah
Click to expand...
Click to collapse
So that means I don't have to root to solve my problem, right? I just have to flash philz?
Correct. Cwm is the key. Then you can flash the zip.
--------------
alliances+siyah
andrewwright said:
Correct. Cwm is the key. Then you can flash the zip.
--------------
alliances+siyah
Click to expand...
Click to collapse
Can you give me a link to a correct zip please...
Philz 5.11.2 is what you want.
--------------
alliances+siyah
Related
Hi all,
I have a galaxy s2 GT-I9100 on baseband I9100XXLQ6 custom kernal Jeboo 3.0.31 v1.1c on Android 4.1.2 Lion rom JB I9100V1.3 problem is I want to load up Jelly bam but keep getting installation aborted in CWM recovery I wipe cache data and delvick, I've tried other roms like avatar and it also fails, do I need to do something else? do I have to update my firmware to XXLPQ?
Sorry if it's in the wrong section.
Cheers
You have to change your kernel:
Flash this using odin : http://d-h.st/hcS
And I hope u meant jelly bam
mohitgalaxy3 said:
You have to change your kernel:
Flash this using odin : http://d-h.st/hcS
And I hope u meant jelly bam
Click to expand...
Click to collapse
I changed my kernal via CWM to Jeboo.
SUPERSTARDJ01 said:
I changed my kernal via CWM to Jeboo.
Click to expand...
Click to collapse
I guess jeboo is preventing u to do that ... flash philz kernel and try then
Sent from my GT-I9100 using Tapatalk 2
Can I flash in CWM Siyah kernal?
Mr.KiLLeR said:
I guess jeboo is preventing u to do that ... flash philz kernel and try then
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Do you have a link?
is this it? http://forum.xda-developers.com/showthread.php?t=1901191 or this http://www.galaxys2roms.com/details/?r=1194
Sorry to be a pain but do I use XXLPQ-OXX ICS 4.0.3 or XXLSJ-OXX (Jellybean leak) i'm on i9100xxlq6
Or you can try flashing to a stock rom first and then retry flashing the custom rom
wishmas7er said:
Or you can try flashing to a stock rom first and then retry flashing the custom rom
Click to expand...
Click to collapse
Tried flashing Philz kernel and it still failed to install the rom saying installation aborted.
i said ROM, not Kernel...
go back to a stock ICS or GB rom if you want via Odin, and then retry the JB
wishmas7er said:
i said ROM, not Kernel...
go back to a stock ICS or GB rom if you want via Odin, and then retry the JB
Click to expand...
Click to collapse
Oh ok, where can I download it?
either here
http://www.sammobile.com/firmware/
or in the forum there is a thread too i think with stock roms
wishmas7er said:
either here
http://www.sammobile.com/firmware/
or in the forum there is a thread too i think with stock roms
Click to expand...
Click to collapse
Do I need to do anything with my kernel?
You dont seem to know the basics pal.The stock rom he linked contains kernel/modem/rom so have a guess what happens when you flash them to your phone.
{go back to your iphone since you are an android noob}
theunderling said:
You dont seem to know the basics pal.The stock rom he linked contains kernel/modem/rom so have a guess what happens when you flash them to your phone.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
TBH we all have to find out the info at some point and this is my time to find out.
True, but you have to know the basics before flashing or else youll be the one with the non working phone.
Eg.If you had read a little bit about nand backups, you could have your phone back to how it was in 5 mins, before you messed with other roms.
So once you have your rooted phone to your liking you make a backup.Then if you try another rom and dont like it, boot into cwm and restore your backup in 5 mins.
{go back to your iphone since you are an android noob}
theunderling said:
True, but you have to know the basics before flashing or else youll be the one with the non working phone.
Eg.If you had read a little bit about nand backups, you could have your phone back to how it was in 5 mins, before you messed with other roms.
So once you have your rooted phone to your liking you make a backup.Then if you try another rom and dont like it, boot into cwm and restore your backup in 5 mins.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
I have a nand backup of which I've been using, I've also made backup using mybackup so all covered, I've flashed several roms previously with no issues.
SUPERSTARDJ01 said:
Hi all,
I have a galaxy s2 GT-I9100 on baseband I9100XXLQ6 custom kernal Jeboo 3.0.31 v1.1c on Android 4.1.2 Lion rom JB I9100V1.3 problem is I want to load up Jelly bam but keep getting installation aborted in CWM recovery I wipe cache data and delvick, I've tried other roms like avatar and it also fails, do I need to do something else? do I have to update my firmware to XXLPQ?
Sorry if it's in the wrong section.
Cheers
Click to expand...
Click to collapse
It could be that the zip download is corrupted. Try re-downloading and flash again.
If not, flash Siyah v4 kernel via recovery or odin then try flashing desired rom again.
TheATHEiST said:
It could be that the zip download is corrupted. Try re-downloading and flash again.
If not, flash Siyah v4 kernel via recovery or odin then try flashing desired rom again.
Click to expand...
Click to collapse
Tried that and it aborted.
SUPERSTARDJ01 said:
Tried that and it aborted.
Click to expand...
Click to collapse
What aborted? Flashing the newly downloaded rom or flashing Siyah via ODIN and then trying to flash rom again?
If you cant flash rom after you have Siyah kernel installed then as mentioned above you will need to try and restock via ODIN.
Official JB update for SGII wil be 03.03.2013, and I wanted to ask a question.I have a rooted phone with Siyah v5.0.1 kernel, with orginal ROM. Can I update my phone to official 4.1.2 with a rooted phone with Siyah kernel ? Or I must unroot my phone and get my stock kernel.
I now it may sound like a noob question but I'm new here so better I ask someone.
Thanks.
the easiest way is to simply flash the Rom with odin,
worst case scenario is that you have to wipe data/Factory reset after flashing,
so make a nandroid and a backup with titanium backup or something similar.
just so you have a cliff to lean back on.
unless you flash with mobile odin you will lose root though,
but then youll only have to flash a new rooted kernel and you should be good to go!
Honst3r said:
Official JB update for SGII wil be 03.03.2013, and I wanted to ask a question.I have a rooted phone with Siyah v5.0.1 kernel, with orginal ROM. Can I update my phone to official 4.1.2 with a rooted phone with Siyah kernel ? Or I must unroot my phone and get my stock kernel.
I now it may sound like a noob question but I'm new here so better I ask someone.
Thanks.
Click to expand...
Click to collapse
no you cant, i tried update with speedmod kernel it doesnt allow you to.. unroot first then download the update
pzayx said:
the easiest way is to simply flash the Rom with odin,
worst case scenario is that you have to wipe data/Factory reset after flashing,
so make a nandroid and a backup with titanium backup or something similar.
just so you have a cliff to lean back on.
unless you flash with mobile odin you will lose root though,
but then youll only have to flash a new rooted kernel and you should be good to go!
Click to expand...
Click to collapse
Thanks for the guide, So only to be sure.
I donwload the official ROM, then I flash it with odin and then if I want to root my phone again I must flash a rooted rom.
And the official update contains the stock kernel ? Because I got alredy a backup done with CWM and when I flash the official ROM and it will replace Syiah kernel with CWM and if somenting goes wrong then I can't restore it .
Honst3r said:
Official JB update for SGII wil be 03.03.2013
Click to expand...
Click to collapse
?!?!
The topic title says 4.2.1. On 03-Mar-2013??? Where is this coming from? Did I miss something?
kt-Froggy said:
?!?!
The topic title says 4.2.1. On 03-Mar-2013??? Where is this coming from? Did I miss something?
Click to expand...
Click to collapse
Um sorry it should be 4.1.2
Honst3r said:
Um sorry it should be 4.1.2
Click to expand...
Click to collapse
4.1.2 is already out for some regions
Sent from my gt-9100 powered by dorimanx
You can thank me if i helped you
Well, I erased the wrong nandroid and wiped out my stock ROM. So I can't revert to stock and unroot ready for the official ota without using Odin (which I have NO intentions of doing lol) but then, I'm currently running 4.2.2 anyway...so I'm not sure I would....even if I could.....
And tbh.....I like not having all that bloatware......
Sent from my CM10.1 powered Galaxy S2 with tapatalk 2
---------- Post added at 10:47 PM ---------- Previous post was at 10:42 PM ----------
Will you be reverting back to 4.0.4?
......Beware the emmc BrickBug...
Sent from my CM10.1 powered Galaxy S2 with tapatalk 2
I would not unroot the phone. Just use Odin for flashing the new firmware and after that you can root it again. For me it's much saver than using buggy Kies...
keithross39 said:
Well, I erased the wrong nandroid and wiped out my stock ROM. So I can't revert to stock and unroot ready for the official ota without using Odin (which I have NO intentions of doing lol) but then, I'm currently running 4.2.2 anyway...so I'm not sure I would....even if I could.....
And tbh.....I like not having all that bloatware......
Sent from my CM10.1 powered Galaxy S2 with tapatalk 2
---------- Post added at 10:47 PM ---------- Previous post was at 10:42 PM ----------
Will you be reverting back to 4.0.4?
......Beware the emmc BrickBug...
Sent from my CM10.1 powered Galaxy S2 with tapatalk 2
Click to expand...
Click to collapse
I've got a nandroid backup from my stock ROM in PC and on USB so if somenting goes wrong I just copy it to phone.
But my question is when I flash the official rom 4.1.2 it will unroot my phone and CWM recovery mode will be deleted because of new kernel, and if there somenting goes wrong how should I backup it when there will be no CWM recovery mode .
Honst3r said:
I've got a nandroid backup from my stock ROM in PC and on USB so if somenting goes wrong I just copy it to phone.
But my question is when I flash the official rom 4.1.2 it will unroot my phone and CWM recovery mode will be deleted because of new kernel, and if there somenting goes wrong how should I backup it when there will be no CWM recovery mode .
Click to expand...
Click to collapse
If there will be no cwm you could flash a different kernel from Odin
Sent from my GT-I9100 using xda app-developers app
jeetBLswami said:
If there will be no cwm you could flash a different kernel from Odin
Click to expand...
Click to collapse
Or just use a temporary CWM - flash it from stock recovery, do a backup, reboot.
Hi, I'v flashed my I9003 with Project chaos 4.1.2 (very stable and beautiful) but data connection doesn't function. It's set in right mode. Help me!!! Thanks
gentleo said:
Hi, I'v flashed my I9003 with Project chaos 4.1.2 (very stable and beautiful) but data connection doesn't function. It's set in right mode. Help me!!! Thanks
Click to expand...
Click to collapse
what was the firmware on your phone before you flashed this?
sriram231092 said:
what was the firmware on your phone before you flashed this?
Click to expand...
Click to collapse
i9300xxemc2
gentleo said:
i9300xxemc2
Click to expand...
Click to collapse
since the rom you flashed is based on MG5 latest release, it changes efs partition into a new format.
1st simple step: check your apn settings.
is your imei okay?
if yes, then flash stock MG5 via odin and then root it and flash the same rom via mobile odin.
quildsy band
sriram231092 said:
since the rom you flashed is based on MG5 latest release, it changes efs partition into a new format.
1st simple step: check your apn settings.
is your imei okay?
if yes, then flash stock MG5 via odin and then root it and flash the same rom via mobile odin.
Click to expand...
Click to collapse
My APN is ok. What do you meann flash stock Mg5 via odin etc...
Yesteray I did the same...I've rooted my phone, I've flashed Porject Chaos 4.1.2 via odin...I don't understand well...
gentleo said:
My APN is ok. What do you meann flash stock Mg5 via odin etc...
Yesteray I did the same...I've rooted my phone, I've flashed Porject Chaos 4.1.2 via odin...I don't understand well...
Click to expand...
Click to collapse
Fail to read the basics before flashing do nothing now until you actually understand .
http://forum.xda-developers.com/showthread.php?t=2393289
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts
Maybe I understand that I have an other EFS and so I should flash again my phone with EFSv2 baseband???
READ READ READ .
http://forum.xda-developers.com/show....php?t=2393289
If you have ever flashed XXEMG* (or newer) ROM, to keep your IMEI working, you must:
Stay with the EFS v2 basebands (MG* or newer). You may flash other ROMs but must return to the MG* (or newer) baseband
Restore your EFS backup (taken before XXEMG* or newer ROM install) to use older (EFS v1) basebands. EFS backup must be an EFSv1 backup to use an EFS v1 baseband
If the above don't work, consider sending for repair
OK, so my S3 GT-I9300 (intl.) was running perfectly on stock ROM with CWM 6.0.4.4 touch until today, I flashed TWRP 2.8.6.0 via odin 3.07 and now the IMEI is null/null and Baseband is unknown? I have also tried flashing back to CWM 6.0.4.4 but still no network. I don't even Have an EFS backup.
Please Help Me..... :crying: :crying:
EDIT: Never Mind, I fixed it by flashing modem....
waqaswasil said:
OK, so my S3 GT-I9300 (intl.) was running perfectly on stock ROM with CWM 6.0.4.4 touch until today, I flashed TWRP 2.8.6.0 via odin 3.07 and now the IMEI is null/null and Baseband is unknown? I have also tried flashing back to CWM 6.0.4.4 but still no network. I don't even Have an EFS backup.
Please Help Me..... :crying: :crying:
EDIT: Never Mind, I fixed it by flashing modem....
Click to expand...
Click to collapse
Me too. After flashing TWRP!! No backup efs. What now.... service?
---------- Post added at 12:50 PM ---------- Previous post was at 12:42 PM ----------
waqaswasil said:
EDIT: Never Mind, I fixed it by flashing modem....
Click to expand...
Click to collapse
What modem you flashing???
Driver1 said:
What modem you flashing???
Click to expand...
Click to collapse
Same As My Firmware.... :good:
I installed stock rom from sammobile:
I9300XXUGNG3_I9300XEOGNG1_I9300XXUGNA8_HOME.tar.md5
and it doesnt work.
Driver1 said:
I installed stock rom from sammobile:
I9300XXUGNG3_I9300XEOGNG1_I9300XXUGNA8_HOME.tar.md5
and it doesnt work.
Click to expand...
Click to collapse
I didn't even flash the whole stock ROM, I just flashed the modem via odin and voila....
in your case, what are the symptoms? tell me your IMEI and baseband...
waqaswasil said:
I didn't even flash the whole stock ROM, I just flashed the modem via odin and voila....
in your case, what are the symptoms? tell me your IMEI and baseband...
Click to expand...
Click to collapse
Now, after flashing stock firmware i have imei 004999.......
I am from Poland.
Hi all, my second ish post on xda (yes im a moderate android noob), i am after some advice and help on flashing CM11 to my S2 (Intl), as it feels really outdated (because it is) and also quite slow (because it is). Ive read about the brickbug and i ran Chainfire's GotBrickbug tool and it said "unknown chip, not sure if dangerous, at least it isnt known to be bad. The chip is V3U00M and the revision is 0xE. I also ran another checker and it said sane chip. Im running the stock 4.0.4 (rooted with Framaroot and removed carrier rubbish) and apparently 4.0.4 is prone to bricking. Ive read about flashing new kernels (Siyah etc) and other methods. I know there is the 4.1.2 update, does that remove the chances of brickbug so i can then flash CM11 via CWM? Any help will be greatly appreciated.
Sent from my GT-I9100
P_Wheeler said:
.... I know there is the 4.1.2 update, does that remove the chances of brickbug so i can then flash CM11 via CWM? Any help will be greatly appreciated.
Sent from my GT-I9100
Click to expand...
Click to collapse
Official 4.1.2 firmware is safe, only 4.0.4 has brickbug.
So do i just upgrade to 4.1.2 then use odin to flash CWM 6.0.4.5 and then follow normal procedure? Thanks for replying btw
Sent from my GT-I9100
P_Wheeler said:
So do i just upgrade to 4.1.2 then use odin to flash CWM 6.0.4.5 and then follow normal procedure? Thanks for replying btw
Sent from my GT-I9100
Click to expand...
Click to collapse
Download XWMS3 4.1.2 from sammobile site(you have to log in). Then use Odin to flash it. Download PhilZ xwms3 kernel and put kernel zip on sdcard. Reboot in stock Samsung recovery and flash that kernel zip file. Then reboot again in recovery and flash philz 6.0.5.0 touch recovery.
Or... You can root 4.1.2 with siyah kernel, but you need to flash kitkat compatible recovery
Zile995 said:
Download XWMS3 4.1.2 from sammobile site(you have to log in). Then use Odin to flash it. Download PhilZ xwms3 kernel and put kernel zip on sdcard. Reboot in stock Samsung recovery and flash that kernel zip file. Then reboot again in recovery and flash philz 6.0.5.0 touch recovery.
Or... You can root 4.1.2 with siyah kernel, but you need to flash kitkat compatible recovery
Click to expand...
Click to collapse
Can i use the OTA from Software Update and then once i have 4.1.2 flash CWM or Philz or TWRP with odin? Or do i have to flash the kernel?
Sent from my GT-I9100
P_Wheeler said:
Can i use the OTA from Software Update and then once i have 4.1.2 flash CWM or Philz or TWRP with odin? Or do i have to flash the kernel?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yes, you can use OTA to update your android. Then you need to root your phone and install CWM compatible recovery to flash CM11
Zile995 said:
Yes, you can use OTA to update your android. Then you need to root your phone and install CWM compatible recovery to flash CM11
Click to expand...
Click to collapse
Thanks heaps man, ill probably use Framaroot as it is easy and it works atm, hopefully ill be a happy user of CM11 haha
I just thought I'd say I've got the S2 on OmniRom 5.1 now after using a rather unstable and buggy CM11 nightly. Thanks for your help BTW
Sent from my debloated SM - T210 running NoleKat