Related
I have just tried rooting my i9100p orange uk model and now it is stuck on the yellow triangle when i flashed the insecure kernel. I tried flashing the secure kernal back again but still the phone is stuck on the loading bit when you first turn on the phone.
I am stuck on what to do?
Please could someone help me as i need the phone working for tomorrow?
ems1234 said:
I have just tried rooting my i9100p orange uk model and now it is stuck on the yellow triangle when i flashed the insecure kernel. I tried flashing the secure kernal back again but still the phone is stuck on the loading bit when you first turn on the phone.
I am stuck on what to do?
Please could someone help me as i need the phone working for tomorrow?
Click to expand...
Click to collapse
What insecure and secure kernels did you flash? And where did you get them from?
My guess is you flashed kernels either not meant for your device, or you flashed a Gingerbread kernel on an ICS firmware, or vice versa.
In any case, you need to include more info. What build are you on? What did you flash?
I got the kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=1101671
GT-I9100P_BVKI2_original
that is the one i downloaded.
can i just re flash the stock rom will that solve the problem?
if so does anyone have the link for the i9100p orange stock rom?
http://androidromupdate.com/2012/04...ce-cream-sandwich-i9100pbvlp6-stock-firmware/
if i download this rom and flash via odin will it solve my problem?
ems1234 said:
I got the kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=1101671
GT-I9100P_BVKI2_original
that is the one i downloaded.
Click to expand...
Click to collapse
Well, that is a Gingerbread kernel. However, not knowing what your actual firmware version is, I can't say why it failed. Maybe you were on ICS? Or if you were on Gingerbread, the firmware version was too disparate from the kernel version.
ems1234 said:
can i just re flash the stock rom will that solve the problem?
Click to expand...
Click to collapse
Yes.
ems1234 said:
if so does anyone have the link for the i9100p orange stock rom?
Click to expand...
Click to collapse
www.sammobile.com
---------- Post added at 03:09 PM ---------- Previous post was at 03:03 PM ----------
ems1234 said:
http://androidromupdate.com/2012/04...ce-cream-sandwich-i9100pbvlp6-stock-firmware/
if i download this rom and flash via odin will it solve my problem?
Click to expand...
Click to collapse
Yeah, it should. Until you try to root again. If you flash that firmware, do NOT try to root using the same insecure kernel you did before.
Once i have flashed it back to stock is there a solid way to root ics particularly that rom?
ems1234 said:
Once i have flashed it back to stock is there a solid way to root ics particularly that rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1501719
great thanks flashing stock rom worked!!!!!
Ok, I am lost, I don't know what I'm doing wrong but I tried to install the latest XXDLI8 leak, and I am met with error 7 in CWM.
I even downloaded and flashed the needed PDA from sammobile (which is XXBLG8_XABLG8_XXLH1) but I still get error 7? The assert check fails on PreloadInstaller
What's the deal?
Did you flash root and the modem? LH1 IIRC?
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
alirey said:
you need to flash this one: I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar
and then the lh1 modem separatly or you will get the error 7.
Click to expand...
Click to collapse
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Don't know why. But had the same problem. Error 7 seems to be an file checksum problem and separte flashing solves it.
Sent from my GT-I9300 using xda premium
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Was it a hotfile link?
For me it only works without flaws if I use the odin base that perka made. Now and the I do have hiccups with it though.
Kangburra said:
Did you flash root and the modem? LH1 IIRC?
Click to expand...
Click to collapse
Root is not really required to flash the OTA. However the Rom and the modem need to be flashed separately.
Sent from my GT-I9300
---------- Post added at 11:07 AM ---------- Previous post was at 11:04 AM ----------
Theshawty said:
Then why did Sammobile themselves link to I9300XXBLG8_I9300OXABLG8_I9300XXLH1 as the needed PDA?
Click to expand...
Click to collapse
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
pkoper said:
Was it a hotfile link? .
Click to expand...
Click to collapse
Indeed it was. I should have known better.
gillboyzz said:
Don't use this Rom. This Rom seem to be corrupt. Instead download the LG8 Rom from goo.im and flash the LH1 modem separately.
Sent from my GT-I9300
Click to expand...
Click to collapse
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Kangburra said:
Sammobile are linking to http://www.hotfile.com/dl/170853923/e311e2f/I9300XXBLG8_I9300OXABLG8_BTU.zip.html which still needs the LH1 modem flashed after the ROM flash.
It does work, but you have to flash the modem or you get the 7 error. As above the root steps are not needed, until after the OTA anyway.
Click to expand...
Click to collapse
The only reason I flash cf-root directly after odin'ing the stock ROM is to get CWM so I can flash the OTA.
Theshawty said:
Indeed it was. I should have known better.
Will do.
EDIT: You mean the LG8 one Pulser has uploaded? http://goo.im/devs/pulser/GalaxyS3
Click to expand...
Click to collapse
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
gillboyzz said:
Nope..the original stock rom..just search with the first initials of the rom on goo
Sent from my GT-I9300
Click to expand...
Click to collapse
Well I downloaded it and it seems like it's the "legit" LG8 one so I'll go with it.
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Theshawty said:
Damnit, even more problems. I downloaded and flashed the correct LG8, then I cf-rooted, and installed the LH1 modem and when I finally was supposed to install the OTA, the assert check failed on /system/SW_configuration.xml and threw me an error 7.
Click to expand...
Click to collapse
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Theshawty said:
I flashed Cf-root, yes, but it doesn't interfere with what the assert checks check, and I need not flash the LH1 modem since it's already in the firmware I flashed with ODIN.
I flashed i9300XXBLG8 i9300XABLG8 i9300XXLH1, which was listed as the needed PDA to flash the XXDLI8 OTA.
Click to expand...
Click to collapse
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Kangburra said:
So you odin flashed the base rom
then odin flashed cf-root
boot into cwm and flash LH1 and OTA (no reboot between) and error 7?
Weird. Something wrong with one of those files.
Click to expand...
Click to collapse
Those are the exact steps I took. None of the files seem borked either.
bazzazz said:
I initially had the exact same problem .. so I downloaded the I9300BLG8 base Rom again , but the one without the LH1 modem built in and then flashed LH1 modem after flashing the base Rom. This sorted out my problem .. using this method has been working flawlessly ever since XXDLI4 for me .. worth a shot mate .
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
gillboyzz said:
Pls dont root until fully cooked. Here are my steps.
Do factory reset before flashing
Flash stock BLG8 rom through odin and restart.
On the startup screen where you choose the lang, dont proceed further. Just restrart in the download mode again.
Flash the LH1 modem through odin and restart and again on the startup screen restart the phone in recovery mode. Do factory reset and chose the OTA file flash through recovery. Let the upgarde complete. Dont reboot, just do factory reset again and enjoy the leak.
You may root now if required.
Sent from my GT-I9300
Click to expand...
Click to collapse
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Kangburra said:
Same here, never used the one with the modem in it.
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
How do you get odin to flash an OTA file? I thought the whole point of the cf-root was to get to cwm? Did I miss something here?
Click to expand...
Click to collapse
Nope.. you can't flash the ota file through odin. Refer to my steps above, once the modem is flashed through odin, you use tge stock recovery to flash the OTA
Sent from my GT-I9300
Hey, I just flashed latest 4.1.2 in my I9300 and after that When i flashed 4.2.2 XUFME7 I have the error "Emergency calls only", I think it`s probably from my baseband, probabily it modified my efs (being a new baseband, new format), so when I go to 4.2.2 which probably has a old baseband I get that error, my question is "Can I flash the latest baseband in 4.2.2?", If yes, how can I do that, is anyone have the latest baseband, can someone help me?
Can I flash the latest 4.1.2 baseband in 4.2.2? Where can I find this baseband?
Yes, you can find the XXEMG4 modem in general section
And efs and ROM itself are separated 2 parts, doesn't effect on each other except RIL but it's not big deal.
Main goal is related with EFS, if you have old EFS backup (before XXEMG4 ) then you can use any older modem as long as you want, of course you have to restore the old efs backup to make it compatible.
And if sadly you don't have old efs backup, you can still stick with XXEMG4 or higher modem, just flash modem after you flash ROM then you will be fine
Sent from my GT-I9300 using xda premium
Ok, but where exactly can I find xxemg4 modem flashable in odin? Cuz I don`t have a backup to my efs folder.
No efs bkup and you started flashing roms..o dear. Flash mg4 zip through recovery not odin. You need to read alot more before you break you phone
--------------
alliances+siyah
andrewwright said:
No efs bkup and you started flashing roms..o dear. Flash mg4 zip through recovery not odin. You need to read alot more before you break you phone
--------------
alliances+siyah
Click to expand...
Click to collapse
I don`t need a CWM recovery to do that?
bett3rthan said:
I don`t need a CWM recovery to do that?
Click to expand...
Click to collapse
Yes. Flash philz recovery through odin then you will have cwm
--------------
alliances+siyah
andrewwright said:
Yes.
--------------
alliances+siyah
Click to expand...
Click to collapse
Ok, but is there any way of doing that without rooting my phone? And if i flash philz recovery is this means I will change my kernel also?
As above but why not just root it. You've just flashed a leaked firmware so why not root
--------------
alliances+siyah
---------- Post added at 11:18 AM ---------- Previous post was at 11:17 AM ----------
bett3rthan said:
Ok, but is there any way of doing that without rooting my phone? And if i flash philz recovery is this means I will change my kernel also?
Click to expand...
Click to collapse
No,kernel and recovery are separate. I have siyah kernel and philz recovery. Edit..just to add there is no custom kernel for 4.2.2 leak.
--------------
alliances+siyah
So, if I flash philz recovery with odin it will root my phone also? I don't mind rooting it, but I mind changing my kernel. Also, can I flash philz recovery when useing 4.2.2 stock rom? And believe me I used 4.2.2 XUFME7 stock rom.
try this go ahead and use odin but flash the leak again. yes reflash it but replace the baseband with any mg4 or mg2 that you like. sometimes flashing just the baseband wont work but flashing it as part if a rom will . the best thing imo is to just flash a stock rom from sammobile that uses an mg4 or mg2 baseband
No if you flash philz it wont root it but there is a zip to flash in philz thread. And no it wont change the kernel and yes you can use philz with 4.2.2
--------------
alliances+siyah
Hello, you're out of topic, I know what I have to do, but I don't find anyware a xxemg4 modem flashable in odin, I want that so I can update my phone back to 4.2.2 XUFME7. Now my questions are those from the above.
andrewwright said:
No if you flash philz it wont root it but there is a zip to flash in philz thread. And no it wont change the kernel and yes you can use philz with 4.2.2
--------------
alliances+siyah
Click to expand...
Click to collapse
So that means I don't have to root to solve my problem, right? I just have to flash philz?
Correct. Cwm is the key. Then you can flash the zip.
--------------
alliances+siyah
andrewwright said:
Correct. Cwm is the key. Then you can flash the zip.
--------------
alliances+siyah
Click to expand...
Click to collapse
Can you give me a link to a correct zip please...
Philz 5.11.2 is what you want.
--------------
alliances+siyah
hi, its seems that no imei on my GTi9300 after i flashing into ArchiDroid_V2.5.3 from off-JB[4.3] with philz recovery..i re-flashed back to Jb and then imei came back and everything works fine..i want to use a custom, iam new to this flashing and things so i will be glad for
1. suggestion to flash to CM based rom with no imei loss
2. recommended stable rom for s3
tQ for reading :fingers-crossed:
9introverts said:
hi, its seems that no imei on my GTi9300 after i flashing into ArchiDroid_V2.5.3 from off-JB[4.3] with philz recovery..i re-flashed back to Jb and then imei came back and everything works fine..i want to use a custom, iam new to this flashing and things so i will be glad for
1. suggestion to flash to CM based rom with no imei loss
2. recommended stable rom for s3
tQ for reading :fingers-crossed:
Click to expand...
Click to collapse
Take a back up of your working IMEI. Try using the latest version of archidroid.
:smile:
:fingers-crossed: tanq for ur response ,mind to provide me a link if dont mind please
Darke5tShad0w said:
Take a back up of your working IMEI. Try using the latest version of archidroid.
Click to expand...
Click to collapse
9introverts said:
:fingers-crossed: tanq for ur response ,mind to provide me a link if dont mind please
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s3/development/rom-archidroid-v2-4-6-power-hands-t2354859
Darke5tShad0w said:
http://forum.xda-developers.com/galaxy-s3/development/rom-archidroid-v2-4-6-power-hands-t2354859
Click to expand...
Click to collapse
i did downloaded and flashed with archie 3 but same problem repeats and i restored into old stock then imei came back everything works fine any other suggestion for this problem bruH:crying::crying:
Hi Friends in deep trouble..
i am on dn4 v2.1
i just flashed twrp-2.8.6.0-t03gub.img.tar from here http://twrp.me/devices/samsunggalaxynote2n7100.html
i thought this is the latest TWRP
now i have lost my mobile network
can some one help me plz ...
friend.
for gt-7100 is correct this twrp-2.8.6.0-t03g.img.tar.
caution - twrp-2.8.6.0-t03gub.img.tar, twrp-2.8.6.0-t03gduoszn.img.tar, are other devices
size > 8MB, beyond the incompatibility and lost partition EFS, now recovery using stock rom .
Messed up with dev/block and efs !
Download stock rom for n7100 from samsung's official site.
Flash stock rom using odin.
This will reset your modem/radio (lost IMEI) and efs folder.
wow
Friend < dont bother and dont do anything more < U just download Stock firmware from sam mobile site and flash using Odin, I faced same problem and after flashing stock everything ok So dont try to restore efs and else just flash stock and all will b done u can contact me 9825854599
vinodxxx said:
Hi Friends in deep trouble..
i am on dn4 v2.1
i just flashed twrp-2.8.6.0-t03gub.img.tar from here http://twrp.me/devices/samsunggalaxynote2n7100.html
i thought this is the latest TWRP
now i have lost my mobile network
can some one help me plz ...
Click to expand...
Click to collapse
I know the feeling...i avoid all the TWRP updates and keep only the version 2.7.2.1, with this one i have no problems at all. The version 2.8.5 worked well...but after my 3rd ou 4th flash/reflash ROM i lost the Mobile Network...and yes, im pretty sure that was caused by the recovery.
After fix the mobile network problems, i reversed to TWRP 2.7.2.1...flash, reflash and flas again the same ROM and its all working fine.
I never had any problems with CWM..but TWRP make F2FS easy to implement on nandroid, thats why i keep using it.
I Just get the Mobile Netwok back, after flashing oficial Sammy ROM with desktop Odin.
GL.:good:
Hey guys just flash the modem and you are all good. No need to do the full odin rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app
sound good !
jlmancuso said:
Hey guys just flash the modem and you are all good. No need to do the full odin rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
vinodxxx said:
Hi Friends in deep trouble..
i am on dn4 v2.1
i just flashed twrp-2.8.6.0-t03gub.img.tar from here http://twrp.me/devices/samsunggalaxynote2n7100.html
i thought this is the latest TWRP
now i have lost my mobile network
can some one help me plz ...
Click to expand...
Click to collapse
I fell in the same problem few hours ago....
wilyman said:
friend.
for gt-7100 is correct this twrp-2.8.6.0-t03g.img.tar.
caution - twrp-2.8.6.0-t03gub.img.tar, twrp-2.8.6.0-t03gduoszn.img.tar, are other devices
size > 8MB, beyond the incompatibility and lost partition EFS, now recovery using stock rom .
Click to expand...
Click to collapse
That's right... but I found that out after flashing the recovery I discovering I've lost my signal & IMEI
Problem is the files are under the link of GT N7100 with no reference to any sub-types...
jlmancuso said:
Hey guys just flash the modem and you are all good. No need to do the full odin rom.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
that's 100% correct.. Thank you. I just got the Modem only file and flashed it with PC Odin and all is well now.
zoghrob said:
I fell in the same problem few hours ago....
That's right... but I found that out after flashing the recovery I discovering I've lost my signal & IMEI
Problem is the files are under the link of GT N7100 with no reference to any sub-types...
that's 100% correct.. Thank you. I just got the Modem only file and flashed it with PC Odin and all is well now.
Click to expand...
Click to collapse
I'm having the same issue. Can i get the link to the modem Please? I'm currently downloading the full rom and its taking really long
last week faced same problem
Ntning was working on it. Even z3x box was not working on it.
Then download full stock rom and flash .
Anyone know is twrp problem or Odin 3.10
same problem here. i lost modem .
i think it is a bug in this kernal
b4 doing this update i hav backud up my modem efs boot via twrp...
so restored d same.
Mazupicua said:
I'm having the same issue. Can i get the link to the modem Please? I'm currently downloading the full rom and its taking really long
Click to expand...
Click to collapse
Sure, here it is.
Modem Only XXUFND3
I just googled for:
XXUFND3 Modem only download
Just make sure it's the same build as your firmware. This is for ND3
Good luck.
zoghrob said:
Sure, here it is.
Modem Only XXUFND3
I just googled for:
XXUFND3 Modem only download
Just make sure it's the same build as your firmware. This is for ND3
Good luck.
Click to expand...
Click to collapse
Thank you. the download did finish before i saw your answer so i just went ahead and flashed stock. highly appreciate it
Hi
Problem is in flashing this recovery twrp-2.8.6.0-t03gub.img.tar t03gub is not for n7100 u must find 2,8,6,0-t03g for n7100[/SIZE]
97292lucky said:
last week faced same problem
Ntning was working on it. Even z3x box was not working on it.
Then download full stock rom and flash .
Anyone know is twrp problem or Odin 3.10
Click to expand...
Click to collapse
Thank u very much.. u gave me perfect solution..
hey guys , i had the same problem after flashing twrp on my note 2 {e250s}, but i flashed the modem and everything was ok, but when i run a ussd command , it pops up in korean language,pls help
97292lucky said:
last week faced same problem
Ntning was working on it. Even z3x box was not working on it.
Then download full stock rom and flash .
Anyone know is twrp problem or Odin 3.10
Click to expand...
Click to collapse
Just instal twrp .zip (through recovery) and you will have no trouble
Sent from my SM-N910C using XDA Forums Pro.
Applied twrp-2.8.0.0-l900.img and modem.bin
To clarify my issue (same as OP): Applying twrp-2.8.6 seems to have ganked my modem. Everything else works. I tried MULTIPLE times to restore to factory, then apply twrp then restore from backup. Found out it is only happening AFTER I apply twrp 2.8.6. I finally found a copy of twrp 2.8.5 for the L900 but that has the same issue, so I applied 2.8.0 and the modem bin at the same time. This seems to have fixed the radio and i am back to functionality AND twrp is installed.
Now, I am not POSITIVE that it requires both actions (it might just be an issue with 2.8.5 and 2.8.6), but the solution was:
Code:
heimdall flash --RECOVERY twrp-2.8.0.0-l900.img --RADIO ./ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship/modem.bin --no-reboot
If I have to do this again, I would apply twrp-2.8.0.0-l900.img first using your loader of choice (Odin3 or heimdall et al.) and see if that was all that was necessary or they both have to be applied (for some wildly cool magics that I am sure no one would be able to figure out).
peter.scordamaglia said:
Now, I am not POSITIVE that it requires both actions (it might just be an issue with 2.8.5 and 2.8.6), but the solution was:
Code:
heimdall flash --RECOVERY twrp-2.8.0.0-l900.img --RADIO ./ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship/modem.bin --no-reboot
Click to expand...
Click to collapse
Oh man, thanks so much for posting this. I ran into the same trouble (flashed latest twrp and lost network). Just ODINed the modem.bin back and my phone is back!