Wifi tether leaked AT&T 4.3 - AT&T HTC One (M7)

Has anybody gotten wifi tether to work on the stock leaked 4.3 firmware?

I'm using android revolution and flashed the 1500 firmware and it's working fine. On 4.1 I had to install a mod but I would be careful cause it might not work on this firmware. Someone else should confirm, but I tried to install the back button long press mod on 4.3 and it didn't work.
Sent from my HTC One using XDA Premium 4 mobile app

Related

WiFi Tether in the JB leaks.

New to android and the GT-i9300. I've been trying the JB leaks....but in each and every one I cannot get WiFi tethering to produce a visible SID. I've been rooting these with cf-root 6.4. WiFi tether works fine on my ICS nandroid backup....which I had rooted with one of those all in one kits for the S3.
Is there some kernel support I am lacking ? No WiFi tether is a deal breaker for me.....
Sent from my GT-I9300 using xda premium
here works
try to reinstall the original rom, and after that install the JB leak

Wifi to work in AOSP

It's been well documented on here that in order for wifi to work on AOSP ROM's you need to flash an ICS ROM first then go back so im downloading Omega 13.1 now but my question is do i have to actually be connected to wifi when flashing the ICS ROM or can i just have it enabled and do i need to flash using Odin or can i use CWM,i then want to go back to Liquid Jellybean, can someone please post the necessary steps i need to take.
Cheers
I went straight from LI8 to liquid 2.0 Rc3 and wifi works just fine.
Sent from my GT-I9300 using xda premium
nodstuff said:
I went straight from LI8 to liquid 2.0 Rc3 and wifi works just fine.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
oh really, ok i was under the impression that i had to flash an ICS ROM first, i tried wifi tethering on Liquid Jelly Bean and it wont work but it works fine with Dragon 1.7 ROM
Haven't used wifi tethering but that may be a rom issue.
Sent from my GT-I9300 using xda premium

Running an nontw 4.3 ROM after MJ9 firmware

Hi everyone,
I'm trying to install the pacman paranoid 3.99 rom on my note 2 but whenever I install it, I get no signal or internet connectivity. I can turn on WiFi though. I already tried using the latest cwm, twrp and philz but none of them work.
My note 2 was unlocked back in 2012 when vraljb was out and I recently flashed the mj9 firmware to run alliancerom.
Anyone have any idea how to flash a 4.3 non tw ROM after upgrading to MJ9?
Do I have to Odin back to 4.1.2 (like vraljb) in order for it to work properly?
Or is my phone just acting up and people are able to go back and forth between nontw 4.3 ROMs, 4.3 tw ROMs and 4.4.2 non tw ROMs freely?
Thanks in advance!
Sent from my SCH-I605 using Tapatalk
xredjokerx said:
Hi everyone,
I'm trying to install the pacman 3.99 rom on my note 2 but whenever I install it, I get no signal or internet connectivity. I can turn on WiFi though. I already tried using the latest cwm, twrp and philz but none of them work.
My note 2 was unlocked back in 2012 when vraljb was out and I recently flashed the mj9 firmware to run alliancerom.
Anyone have any idea how to flash a 4.3 non tw ROM after upgrading to MJ9?
Do I have to Odin back to 4.1.2 (like vraljb) in order for it to work properly?
Or is my phone just acting up and people are able to go back and forth between nontw 4.3 ROMs, 4.3 tw ROMs and 4.4.2 non tw ROMs freely?
Thanks in advance!
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I would have to say its your phone.. I am able to go back and forth with no issues.. You sure no one else on that ROM is experiencing those issues?
I flop back and forth from Nebula to PA 4.4.2
Sent from my SCH-I605 using xda app-developers app
I can swap between AOSP 4.4.2 roms and TW 4.3 roms, but not AOSP 4.3 and the other two.
However, I was able to get PACMAN 4.3 running fine, so I'm okay. Strange that the others don't work though..
xredjokerx said:
I can swap between AOSP 4.4.2 roms and TW 4.3 roms, but not AOSP 4.3 and the other two.
However, I was able to get PACMAN 4.3 running fine, so I'm okay. Strange that the others don't work though..
Click to expand...
Click to collapse
Ahh ok I miss understood.. Not sure about the ability to do that.. ?.. Why go back to 4.3 aosp.. Stability?
Sent from my SCH-I605 using xda app-developers app
lacoursiere18 said:
Ahh ok I miss understood.. Not sure about the ability to do that.. ?.. Why go back to 4.3 aosp.. Stability?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I wanted to go back to 4.3 AOSP for a few reasons
4.3 is the last version of android with browser reflow
Pacman and paranoid roms have halo built in, and runs smoother than xhalofloatingwindows
:good: thanks for replying!
xredjokerx said:
I wanted to go back to 4.3 AOSP for a few reasons
4.3 is the last version of android with browser reflow
Pacman and paranoid roms have halo built in, and runs smoother than xhalofloatingwindows
:good: thanks for replying!
Click to expand...
Click to collapse
Ah got ya.. I don't see why there would be issues.. Still on same bootloader.. Not sure why it would be a problem
Sent from my SCH-I605 using xda app-developers app

WiFi Won't turn on

Upgraded from 4.1.2 to 4.4.2 (unlocked bootloader) was on the deodexed official ROM, WiFi won't turn on. Everytime I flip the switch it immediately turns itself back off
Haloman800 said:
Upgraded from 4.1.2 to 4.4.2 (unlocked bootloader) was on the deodexed official ROM, WiFi won't turn on. Everytime I flip the switch it immediately turns itself back off
Click to expand...
Click to collapse
You need to odin 4.3 firmware..
http://forum.xda-developers.com/showthread.php?t=2578458
Sent from my SCH-I605 using XDA Premium 4 mobile app
lacoursiere18 said:
You need to odin 4.3 firmware..
http://forum.xda-developers.com/showthread.php?t=2578458
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Crap. Do I have to wipe everything and go from 4.3 > 4.4.2 again?
Edit: Flashed it via odin and it's working now. Do I reflash the N7 modem now?

From custom rom to stock firmware

Hello i root and then install a custom rom but im having problems with signal and wifi. My question is is there a way to restore my stock firmware? I wanna go back to normal i used to have android 4.3 and my rom right now is the hyperdrive rt16 and it says its 4.1.2 thank you !
Sent from my SGH-I747 using XDA Free mobile app
zephirop said:
Hello i root and then install a custom rom but im having problems with signal and wifi. My question is is there a way to restore my stock firmware? I wanna go back to normal i used to have android 4.3 and my rom right now is the hyperdrive rt16 and it says its 4.1.2 thank you !
Sent from my SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
If you want a custom jb ROM working fine in WiFi and signal, install shostock3 v4.0 or if you want come back to stock use Odin and install the last stock firmware I777UCMD8
Sent from my SGH-I777 using XDA Free mobile app
zephirop said:
Hello i root and then install a custom rom but im having problems with signal and wifi. My question is is there a way to restore my stock firmware? I wanna go back to normal i used to have android 4.3 and my rom right now is the hyperdrive rt16 and it says its 4.1.2 thank you !
Sent from my SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
If you have SGH-I747 as your signature indicates, then you are in the wrong forum. If so, disregard the advice above, and go to the correct forum for your phone.

Categories

Resources