Hi everyone,
I'm trying to install the pacman paranoid 3.99 rom on my note 2 but whenever I install it, I get no signal or internet connectivity. I can turn on WiFi though. I already tried using the latest cwm, twrp and philz but none of them work.
My note 2 was unlocked back in 2012 when vraljb was out and I recently flashed the mj9 firmware to run alliancerom.
Anyone have any idea how to flash a 4.3 non tw ROM after upgrading to MJ9?
Do I have to Odin back to 4.1.2 (like vraljb) in order for it to work properly?
Or is my phone just acting up and people are able to go back and forth between nontw 4.3 ROMs, 4.3 tw ROMs and 4.4.2 non tw ROMs freely?
Thanks in advance!
Sent from my SCH-I605 using Tapatalk
xredjokerx said:
Hi everyone,
I'm trying to install the pacman 3.99 rom on my note 2 but whenever I install it, I get no signal or internet connectivity. I can turn on WiFi though. I already tried using the latest cwm, twrp and philz but none of them work.
My note 2 was unlocked back in 2012 when vraljb was out and I recently flashed the mj9 firmware to run alliancerom.
Anyone have any idea how to flash a 4.3 non tw ROM after upgrading to MJ9?
Do I have to Odin back to 4.1.2 (like vraljb) in order for it to work properly?
Or is my phone just acting up and people are able to go back and forth between nontw 4.3 ROMs, 4.3 tw ROMs and 4.4.2 non tw ROMs freely?
Thanks in advance!
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I would have to say its your phone.. I am able to go back and forth with no issues.. You sure no one else on that ROM is experiencing those issues?
I flop back and forth from Nebula to PA 4.4.2
Sent from my SCH-I605 using xda app-developers app
I can swap between AOSP 4.4.2 roms and TW 4.3 roms, but not AOSP 4.3 and the other two.
However, I was able to get PACMAN 4.3 running fine, so I'm okay. Strange that the others don't work though..
xredjokerx said:
I can swap between AOSP 4.4.2 roms and TW 4.3 roms, but not AOSP 4.3 and the other two.
However, I was able to get PACMAN 4.3 running fine, so I'm okay. Strange that the others don't work though..
Click to expand...
Click to collapse
Ahh ok I miss understood.. Not sure about the ability to do that.. ?.. Why go back to 4.3 aosp.. Stability?
Sent from my SCH-I605 using xda app-developers app
lacoursiere18 said:
Ahh ok I miss understood.. Not sure about the ability to do that.. ?.. Why go back to 4.3 aosp.. Stability?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I wanted to go back to 4.3 AOSP for a few reasons
4.3 is the last version of android with browser reflow
Pacman and paranoid roms have halo built in, and runs smoother than xhalofloatingwindows
:good: thanks for replying!
xredjokerx said:
I wanted to go back to 4.3 AOSP for a few reasons
4.3 is the last version of android with browser reflow
Pacman and paranoid roms have halo built in, and runs smoother than xhalofloatingwindows
:good: thanks for replying!
Click to expand...
Click to collapse
Ah got ya.. I don't see why there would be issues.. Still on same bootloader.. Not sure why it would be a problem
Sent from my SCH-I605 using xda app-developers app
Related
I rooted my phone and installed Pandroid and even tried CM9
But to be honest i was more happy with the stock rom that samsung provided for me from the start.
What would be the easies way to get back to where i started from?
Or are there any good stable roms för the galaxy s3 i9300 out there where everything just works?
Endorion said:
I rooted my phone and installed Pandroid and even tried CM9
But to be honest i was more happy with the stock rom that samsung provided for me from the start.
What would be the easies way to get back to where i started from?
Or are there any good stable roms för the galaxy s3 i9300 out there where everything just works?
Click to expand...
Click to collapse
Try an ICS rom - Omega, or DragonICS. They are more similar to stock than the CyanogenMods.
Next time try search harder and ask in Q&A section.
Do whatever you think fit your need with the phone.
Flash original firmware using odin
Or you may try Omega rom, RGUI rom, Foxhound rom and Wanamlite rom. All great roms.
Sent from my GT-I9300 using xda app-developers app
So do you wish to go back to full stock, or a Samsung based custom Rom?
Sent from my GT-P5110 using Tapatalk 2
dr.m0x said:
So do you wish to go back to full stock, or a Samsung based custom Rom?
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
I wish to go back to full stock at the moment
Endorion said:
I wish to go back to full stock at the moment
Click to expand...
Click to collapse
Flash stock rom from the stock rom threads is the basics .
jje
It's been well documented on here that in order for wifi to work on AOSP ROM's you need to flash an ICS ROM first then go back so im downloading Omega 13.1 now but my question is do i have to actually be connected to wifi when flashing the ICS ROM or can i just have it enabled and do i need to flash using Odin or can i use CWM,i then want to go back to Liquid Jellybean, can someone please post the necessary steps i need to take.
Cheers
I went straight from LI8 to liquid 2.0 Rc3 and wifi works just fine.
Sent from my GT-I9300 using xda premium
nodstuff said:
I went straight from LI8 to liquid 2.0 Rc3 and wifi works just fine.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
oh really, ok i was under the impression that i had to flash an ICS ROM first, i tried wifi tethering on Liquid Jelly Bean and it wont work but it works fine with Dragon 1.7 ROM
Haven't used wifi tethering but that may be a rom issue.
Sent from my GT-I9300 using xda premium
Hey guys. I'm new to the Razr. I have it rooted and installed Safestrap recovery v3.11.
I have backed up my stock ROM and am now looking to install some custom ROMs.
I'm wanting to try out a 4.2.2 ROM... what, in your opinion, is the MOST stable 4.2.2 ROM at the moment?
RBarnett09 said:
Hey guys. I'm new to the Razr. I have it rooted and installed Safestrap recovery v3.11.
I have backed up my stock ROM and am now looking to install some custom ROMs.
I'm wanting to try out a 4.2.2 ROM... what, in your opinion, is the MOST stable 4.2.2 ROM at the moment?
Click to expand...
Click to collapse
try LiquidSmooth 2.2.1
2.1 version worked well to me, just that mms wasnt working. But I think it's just my phone. It's stable and smooth
I like either LiquidSmooth or Avatar they are both great for me.
I PAC man its stable and has a lot of customization
RBarnett09 said:
Hey guys. I'm new to the Razr. I have it rooted and installed Safestrap recovery v3.11.
I have backed up my stock ROM and am now looking to install some custom ROMs.
I'm wanting to try out a 4.2.2 ROM... what, in your opinion, is the MOST stable 4.2.2 ROM at the moment?
Click to expand...
Click to collapse
try droidrzr.com they have great support for CDMA verizon droid OG and Maxx devices.
I use Cyanogenmod 10.1 which is based on 4.2.2. However, it's still in its nightly phase so it's not officially stable yet. Use safestrap 3.11 for it.
Sent from my SCH-I535 using xda app-developers app
I'm running Liquidsmooth's ROM that is 4.2.2.
Very stable. I love it!
Sent from my XT912 using xda app-developers app
Do I need to worry about how many times I flash my device? will it get bad or something like the motherboard go bad? I just got this phone used yesturday and want to know if i need to wory as this isnt a brand brand new ive already flashed it more than three times trying too chose the best rom and im kinda worried.
No need to worry, just make sure you wipe data and caches before installing a new rom. Let the phone sit for at least ten minutes after flashing too, then reboot. Just a heads up, stay away from ICS roms, they have the EU bug that renders your internal sd card useless.
Sent from my SGH-T959 using Tapatalk 2
What version is that I'm on PAC man and have been on cm10.1 and want to try 10.2 if this device sees an update
Sent from my SGH-T959 using xda app-developers app
apples723 said:
What version is that I'm on PAC man and have been on cm10.1 and want to try 10.2 if this device sees an update
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
ICS is 4.0, jelly bean is 4.1, 4.2 or 4.3. I can't say which version that ROM is, been awhile since I've messed with ROMs. Go to settings then about phone and see what your firmware version is. If your on 4.0 then you should upgrade to jelly bean immediately, JB doesn't have the EU bug.
Sent from my SGH-T959 using Tapatalk 2
I flashed [ROM] [G.E.] [4.2.2] [AROMA] [VZW] GoogleEdition.v6.0 09/11/13 using SAFESTRAP, but when i reboot there is no display. I know it installed correctly because the buttons work accordingly to the sounds responds i get. What did i do wrong?
That is 4.2 versus 4.3 not the same. Safestrap runs based off the kernel you have as stock, you in the other hand are running mk2 kernel which is 4.3 kernel. That rom is 4.2.2. If only you were on me7.
Sent from my SCH-I545 using Tapatalk
lancyboi said:
I flashed [ROM] [G.E.] [4.2.2] [AROMA] [VZW] GoogleEdition.v6.0 09/11/13 using SAFESTRAP, but when i reboot there is no display. I know it installed correctly because the buttons work accordingly to the sounds responds i get. What did i do wrong?
Click to expand...
Click to collapse
can not run a 4.2 base rom on a 4.3 base phone..........
Wow I feel dumb ?. Thanks for all the help guys. Do you know if there is a 4.3 GE ROM out there?
Sent from my SCH-I545 using xda app-developers app
lancyboi said:
Wow I feel dumb ?. Thanks for all the help guys. Do you know if there is a 4.3 GE ROM out there?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
There actually is but has not been ported over here, but even so 4.3 ge roms have moved towards a more Aosp kernel so it will not work with safestrap anymore.
Sent from my SCH-I545 using Tapatalk
Where would I be able to find it? And do I need to use cwm to flash it? Sorry for the noob questions
Sent from my SCH-I545 using xda app-developers app
You can't flash any roms on mk2...none....except what is available thru safestrap .
No cm base.. no asop base....been said countless times
safestrap powered Hyperdrive 12