Related
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
i was using some jelly bean sony rom by divaksh (it had cwm touch) and i wanted to try the new cm10.2 rom by munjeni
i downloaded the cm10.2, put it on my external sd card through a usb micro-sd reader and then put the µsd back in the phone
i selected "reboot to recovery" from the phone's power menu (i had an xposed module for more power menu options)
then i noticed that the phone didn't reboot, but it had turned off completely
i held the power button and the phone vibrated but didn't power on
it powered on on the second try, i then went to the cwm recovery by tapping the volume down key
(i was going to make a backup of the current system, but i forgot it lol)
i flashed the cm10.2 zip (cm10.2_pepper-ota-eng.root_Build.1.zip) without doing any wipes, because i wanted to get to the correct version of cwm recovery
(i would've properly done the wipes/formats from the cwm recovery that is in the cm10.2 kernel)
it finished flashing the zip and i rebooted my phone, but then it didn't power on anymore
now when i hold down the power button, the phone makes a short vibration but nothing else
.
if i plug the phone to a charger, the led lights up (red) for approximately a second and then turns off
if i hold down "volume-down" and the power button, the phone vibrates once and flashes the led (green)
i've tried going into flashmode and fastboot mode but the light doesn't stay on for long and sony mobile flasher doesn't even notice the phone even though the drivers are installed
the "hold down power button and vol-up"-thing also works but it doesn't seem to do anything else than vibrate
what should i do?
Is your bootloader unlocked?
If yes then flahs
Sent from my LT22i using XDA Premium 4 mobile app
Hamza Murad said:
If yes then flahs
Click to expand...
Click to collapse
what?
Is it unlocked?
When I bricked my xperia p I flashed a custom kernel which allowed me to enter Cwm and then flashed the stock rom. I am new to this flashing thing so I recommend that you ask someone experienced what to do. I just shared my experience of recovering from a softbrick. Don't flash new things blindly but ask someone experienced before doing so.
Sent from my LT22i using XDA Premium 4 mobile app
the bootloader is unlocked, and i'm not new to this "flashing thing"
anyone? the phone still hasn't woken up
download firmware for your p and flash using flashtool...
Osku958 said:
the bootloader is unlocked, and i'm not new to this "flashing thing"
Click to expand...
Click to collapse
Have you used flashtool to flash firmware before on that PC?
Have you installed flashtool and it's drivers (sola, flash & fastboot mode).?
Make sure the phobe is off, press power + volume up untill you feel 1 + 3 vibrations and see if it stay in flash mode longer.
Just Flash stock
i have nearly the same problem
my xperia u was running with 4.1 then i restored my ta backup its mine not for someone else then i pressed reboot instead of power off then my phone is dead no vibration no led except the one when i plug it to charger just one red led then nothing
AndroidNoob69 said:
Just Flash stock
Click to expand...
Click to collapse
how? the phone doesn't boot and flashtool doesn't recognize it
Same problem here, I think that Munjeni's post is bad written.
Ok, I fixed it, follow my instructions as they goes. You have to flash the .img kernel that CM10.2.zip comes from.
For flashing it, go as follows...
First try to install the following drivers, with Flashtool. The executable is in C:\\Flashtool\drivers
Run as adminsitrator and follow screen instructions, allow any driver install.
When it's ready, try to plug in the phone in fastboot mode (turn off, hold power and vol up and release power button, led has to turn blue/violet/pink, whatever, a color like that)
Run flashtool.
Flashtool will recognize the phone as the log says, if its not try to install drivers mannually.
If it's recognized then click the black lightning button and select fast boot mode.
At the right side click "Select kernel to flash" and browse the kernel that comes in the .zip. (in the file you've downloaded you have to extract a boot.ini because is the main kernel to make the ROM work, so you have to put somewhere else, I prefer desktop)
When selected, log writes all the procedure until it show an "OKAY[time]" message.
Finally click "Reboot device into system" in the center side and wait until boots.
It should be working now, I spent a lot of hours investigating, but finally I fixed, hope it works for you too!
If there's an error or some question, feel free to post.
manudo said:
Ok, I fixed it, follow my instructions as they goes. You have to flash the .img kernel that CM10.2.zip comes from.
For flashing it, go as follows...
First try to install the following drivers, with Flashtool. The executable is in C:\\Flashtool\drivers
Run as adminsitrator and follow screen instructions, allow any driver install.
When it's ready, try to plug in the phone in fastboot mode (turn off, hold power and vol up and release power button, led has to turn blue/violet/pink, whatever, a color like that)
Run flashtool.
Flashtool will recognize the phone as the log says, if its not try to install drivers mannually.
If it's recognized then click the black lightning button and select fast boot mode.
At the right side click "Select kernel to flash" and browse the kernel that comes in the .zip. (in the file you've downloaded you have to extract a boot.ini because is the main kernel to make the ROM work, so you have to put somewhere else, I prefer desktop)
When selected, log writes all the procedure until it show an "OKAY[time]" message.
Finally click "Reboot device into system" in the center side and wait until boots.
It should be working now, I spent a lot of hours investigating, but finally I fixed, hope it works for you too!
If there's an error or some question, feel free to post.
Click to expand...
Click to collapse
That was "the long run" for windows-guys.
For Linux - no drivers needed anyways - just download fastboot from anywhere and look for kernel. Put them in a personal directory. Open and run in a terminal (some have to be login as su) "fastboot flash boot kernel.img" (or whatever kernel is called...), plug phone in usb, while press and hold power and volume-up buttons. Blue LED comes shining and terminal tell you the flashing.
Unplug or type "fastboot reboot" to re-start phone.
Sure, you also can use FlashTool, too. But for only flashing a kernel it is not needed. Only for flashing stockrom ftf. But this is another story.
i happens to me yesterday
Hi ! Dont worry u r not the first to face this problem i also face this problem yesterday.. my phone was on JB 4.1.2 i download custom ICS rom and install it through CWM Recovery mode, when my new custom Rom starts it stucks on Boot screen and then nothing happens i tried but my phone was in danger... i was worried then i install flash tool and downlaod ICS Rom for Flastool and install that after severals trys i was now ion ICS v4.0.4..
Just Press volume up key and power simultanly when phone vibrtes three time leave it for 30 sec. and then run Flashtool and follow step to install another or same Rom for Falshtool & You r Done ...:good: Sorry for my bad english and type mistakes...
Osku958 said:
i was using some jelly bean sony rom by divaksh (it had cwm touch) and i wanted to try the new cm10.2 rom by munjeni
i downloaded the cm10.2, put it on my external sd card through a usb micro-sd reader and then put the µsd back in the phone
i selected "reboot to recovery" from the phone's power menu (i had an xposed module for more power menu options)
then i noticed that the phone didn't reboot, but it had turned off completely
i held the power button and the phone vibrated but didn't power on
it powered on on the second try, i then went to the cwm recovery by tapping the volume down key
(i was going to make a backup of the current system, but i forgot it lol)
i flashed the cm10.2 zip (cm10.2_pepper-ota-eng.root_Build.1.zip) without doing any wipes, because i wanted to get to the correct version of cwm recovery
(i would've properly done the wipes/formats from the cwm recovery that is in the cm10.2 kernel)
it finished flashing the zip and i rebooted my phone, but then it didn't power on anymore
now when i hold down the power button, the phone makes a short vibration but nothing else
.
if i plug the phone to a charger, the led lights up (red) for approximately a second and then turns off
if i hold down "volume-down" and the power button, the phone vibrates once and flashes the led (green)
i've tried going into flashmode and fastboot mode but the light doesn't stay on for long and sony mobile flasher doesn't even notice the phone even though the drivers are installed
the "hold down power button and vol-up"-thing also works but it doesn't seem to do anything else than vibrate
what should i do?
Click to expand...
Click to collapse
akkufix said:
That was "the long run" for windows-guys.
For Linux - no drivers needed anyways - just download fastboot from anywhere and look for kernel. Put them in a personal directory. Open and run in a terminal (some have to be login as su) "fastboot flash boot kernel.img" (or whatever kernel is called...), plug phone in usb, while press and hold power and volume-up buttons. Blue LED comes shining and terminal tell you the flashing.
Unplug or type "fastboot reboot" to re-start phone.
Sure, you also can use FlashTool, too. But for only flashing a kernel it is not needed. Only for flashing stockrom ftf. But this is another story.
Click to expand...
Click to collapse
If I wrote for Windows 8 there will be more than that, believe me. Managing Android with Linux is a lot easier, from flashing to programming.
But, face it, Windows is the standard here.
manudo said:
If I wrote for Windows 8 there will be more than that, believe me. Managing Android with Linux is a lot easier, from flashing to programming.
But, face it, Windows is the standard here.
Click to expand...
Click to collapse
That's why i'm working over 8 years till now with Linux.
Hi guys,
I have mk16i(xperia pro), and installed latest lx cm11 build. Then, I tried dark's kernel. But I wanted to revert to the stock kernel.
Now at that point, i couldn't enter the fastboot or flash mode anymore. The OS running w/o any problem. But i'm stuck with the dark's kernel(which is very battery unfriendly,10 hour standby)
When i try to connect the phone to PC while pressing menu(or back button) the LED blinks for miliseconds and the phone continues switching on normally (enter OS).
I know it is my fault to install nonstock kernel but I really need help. If anyone experienced this issue, it will be great to hear the advice.
Thanks in advance
Try taking out the battery for a few seconds, reinserting it, pressing the button for fastboot mode (I don't know which one you have to use for the xperia pro) and then you connect it to your PC while keeping the button pressed. This should work
Sent from my Nexus 4 running Android 4.4
mihahn said:
Try taking out the battery for a few seconds, reinserting it, pressing the button for fastboot mode (I don't know which one you have to use for the xperia pro) and then you connect it to your PC while keeping the button pressed. This should work
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
Thanks for the reply.
I tried it many times. But no chance... The LED blinks then the phone goes into OS.
I tried to reboot fastboot via adb commands. Again same result. Directly goes to OS.
Flashtool also stucks at "Device will soon enter fastboot mode" nothing happens. Phone stays on...
Is it hw fault? I will be very disappointed if so I replaced its digitizer recently by paying too much money.) It was expensive when i bought it also... I cant stand buying a new phone these times... pff too many issues...
Sounds weird. I have made the experience that it sometimes helps to take the battery out, then keep pressing multiply and long the power button. Wait ~10 minutes. Insert the battery and try again!
Hopefully it helps!
Otherwise could maybe be kernel related. Try to flash another one (with recovery).
Depressed T.Bear said:
Sounds weird. I have made the experience that it sometimes helps to take the battery out, then keep pressing multiply and long the power button. Wait ~10 minutes. Insert the battery and try again!
Hopefully it helps!
Otherwise could maybe be kernel related. Try to flash another one (with recovery).
Click to expand...
Click to collapse
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
datumdatzgr said:
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
Click to expand...
Click to collapse
i think you done it allready but better than have adead phone:
- re check if all drivers installed (android sdk with its google driveer, flashtool drivers)
put out battery , put in & hold volume down while plugging cabel in. (if led not stays blue, pull out abttery, put in & reconnect but hold other button like menu key) --> try all buttons
i cant imagine flashing darks kernel broke yr bootloader. theres sth wrong with your machine / setup / whatever.
datumdatzgr said:
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
Click to expand...
Click to collapse
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Depressed T.Bear said:
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Click to expand...
Click to collapse
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
bejunk said:
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
Click to expand...
Click to collapse
That goes without saying! But he hasn't said that he unlocked it.
bejunk said:
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
Click to expand...
Click to collapse
Depressed T.Bear said:
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Click to expand...
Click to collapse
bejunk said:
i think you done it allready but better than have adead phone:
- re check if all drivers installed (android sdk with its google driveer, flashtool drivers)
put out battery , put in & hold volume down while plugging cabel in. (if led not stays blue, pull out abttery, put in & reconnect but hold other button like menu key) --> try all buttons
i cant imagine flashing darks kernel broke yr bootloader. theres sth wrong with your machine / setup / whatever.
Click to expand...
Click to collapse
Thanks for the answers. Yes unlocked bootloader.
Since the device doesn't boot into "flash" mode also, i am not able to flash ftf through flashtool or any firmware via SEUS.
I had managed to enter fastboot mode once!
Happened with USB3.0 port via "adb reboot-bootloader" command.
Still, I am not getting into fastboot again...
I will inform you, thanks guys.
EDIT: I did it once again thru adb in recovery and flashed a stock kernel. Let me see the battery drain is due to kernel or some hw damage.
I am sure hw is damaged...
Ultimately solved...
After i am able to enter fastboot mode via some funny method described above, i erased system partition and flashed kernel.sin of the official .587 ftf file of Sony Xperia Pro.
Now the device is able to enter flash mode and fastboot mode via normal ways...
Thanks guys...
EDIT: I dont understand how is it related to kernel? I thought that bootloader files are damaged which i cannot correct them.
There are many .sin files in the stock .ftf which i cannot flash any of them without flash mode.(i was able to enter fastboot mode only)
datumdatzgr said:
After i am able to enter fastboot mode via some funny method described above, i erased system partition and flashed kernel.sin of the official .587 ftf file of Sony Xperia Pro.
Now the device is able to enter flash mode and fastboot mode via normal ways...
Thanks guys...
EDIT: I dont understand how is it related to kernel? I thought that bootloader files are damaged which i cannot correct them.
There are many .sin files in the stock .ftf which i cannot flash any of them without flash mode.(i was able to enter fastboot mode only)
Click to expand...
Click to collapse
The problem started occuring again. LED blinks again.
This time i am not able to enter fastboot via adb while in recovery mode or another mode. I can't enter fastboot or flash mode, cant install kernel. Tried two pc's many usb cables...
I don't know what to do...
datumdatzgr said:
The problem started occuring again. LED blinks again.
This time i am not able to enter fastboot via adb while in recovery mode or another mode. I can't enter fastboot or flash mode, cant install kernel. Tried two pc's many usb cables...
I don't know what to do...
Click to expand...
Click to collapse
Guys please help. I am very confused now: When i connect the phone to charger(AC) when the phone is OFF, the phone tries to enter flash mode!?! Led blinks green then the phone continues to open and offline charging animation comes as usual.
Sometimes the phone connects the charger in flash mode! But doesnt connect to usb in flash mode or fastboot mode. I know it is a bit confusing but that is the situation.
Thanks...
Hi,
I HAVE GOT A VERY BIG PROBLEM.After i installed the App AutoRec(i had TWRP befoe,but i thougt when i install it it updates TWRP to a newer version) my phone only starts in Fastboot Mode-no DownloadMode-no Recovery Mode.
After that i erased all the things(aboot,boot,cache,system,laf,....) und flashed them again,after that the Phone only starts until the LgLogo then it stops.No Fastboot,no recovery,no DownloadMode.When I Press VolumeUp+PowerOff i get into the Factory Reset.When i press on Erase all user data&restore default settings?---When i press Yes the phone the logo comes an on the left up side stands"Error:boot ceryfication verify
Secure Boot error
Cause :Boot cerification verify
After that the display is black,and i have to restart the Phone.
When i press all 3 buttons on my phone,i got into the hardware key control mode,does me help that everthing?
When i plug in the phone in my pc,it says "unknown device",when i use to do something with fastboot it says"waiting for device"?
Please help me,what can i do?I have the Phone only since 2 two days,an i wouldnt lost it Unhappy
Sorry for my bad english
Can you still get into twrp? With the phone off hold power and vol down til LG logo comes up the release and press again after. Should take you to a menu, just hit yes. If it takes you to recovery just hit factory reset and it'll,take you to twrp. If so, I'd recommend putting a Rom onto an sd and flashing it. You'll lose everything but it's better then losing this beautiful phone
Ilikecheese said:
Can you still get into twrp? With the phone off hold power and vol down til LG logo comes up the release and press again after. Should take you to a menu, just hit yes. If it takes you to recovery just hit factory reset and it'll,take you to twrp. If so, I'd recommend putting a Rom onto an sd and flashing it. You'll lose everything but it's better then losing this beautiful phone
Click to expand...
Click to collapse
You obviously didnt read his post correctly. He stated that when he gets to the factory reset area which leads you to Recovery Mode/TWRP it shows the LG logo appears and nothing happens.
As for you my friend if you are able to somehow get into download mode with a button combination you have a chance at saving yourself by using a TOT or KDZ file to restore your phone to stock software. But i also have a question for you.........Why the hell would you allow an app to flash a recovery file that has nothing to do with BUMP'D? The Bump'd recovery for our phones is specific to our phones! You should never auto update any recovery unless stated its ok from the Bump'd developers, Which they never did or will because our TWRP Recoveries are different than any other phones because of the bump'd implementations with in them and the boot.img's. Sounds to me like you may have screwed up your partitions and/or boot stack. Your are better going on IRC and requesting the help of TheCubed/IOMonster and AutoPrime, but mark my words you will face some heavy criticism from members of the IRC channel when you explain this story to them. But they are always willing to help.
I dont know why i have done it,im new on Lg.Before i had an HTC there is so many other.I will aks that guys.I hope i can save my new phone.
But the Problem is,i dont get into download Menu,i did everthing
same thing
I am i the same problem. I am stuck and can only get to the hardware menu.
vaughnr said:
I am i the same problem. I am stuck and can only get to the hardware menu.
Click to expand...
Click to collapse
Same problem too.
1. no download mode, no fastboot no recovery.
2. In windows, g2 is detected as LGE Androidnet and modem when is on lg screen. Green and blue led flash.
3. Stuck on lg screen
When I try to enter download mode it stay stucked on download image, no firmware upgrade.
Thanks
Try using board diag if you're not getting dl mode: http://forum.xda-developers.com/showthread.php?t=3132359
malhovic said:
Try using board diag if you're not getting dl mode: http://forum.xda-developers.com/showthread.php?t=3132359
Click to expand...
Click to collapse
Not sure it will work.
I have G2. Tryed the G2 metod but nothing.
Thanks guys,
I managed to get back my phone. I had to put it on qualcomm 9008 and after that to flash again all files.
Best regards.
I have flashed my (now my father's) razr couple months ago and now GPS stopped working. It needs to be repaired.
I kind of know how to remove safestrap but what really annoys me is JBX kernel boot logo which appears whatever I do. I can be using stock rom and have no safestrap (nor other roms) installed but JBX logo still appears. I have never been really using it, just tested it once and since that, it is stil there.
Any idea how to remove it?
http://forum.xda-developers.com/showthread.php?t=2390645
Sent from my Razr XT910
Unfortunatelly those bootanimations are no longer available. Any other tips?
PL113 said:
I have flashed my (now my father's) razr couple months ago and now GPS stopped working. It needs to be repaired.
I kind of know how to remove safestrap but what really annoys me is JBX kernel boot logo which appears whatever I do. I can be using stock rom and have no safestrap (nor other roms) installed but JBX logo still appears. I have never been really using it, just tested it once and since that, it is stil there.
Any idea how to remove it?
Click to expand...
Click to collapse
You need a PC to do this and just a regular USB/Charging cord that you normally would use to connect it to a computer.
You need to RSD it, It'll erase everything on the Internal, not the SD card so that should be safe.
Here is a link for the RSD program. LINK
Here is a list of different versions of Android you can download for your Razr LINK
And you also will need these drivers here LINK
(skip this step if your stuck in a bootloop)
1. Now what you do is you connect your phone to the computer, I used Media (MTP) mode. Install the Drivers and install RSD lite. and pick your Fastboot file version you want, I did the 4.1.2 so i could root it again with the easy root, but its your preference. Now Unplug your phone and hold power and turn it off.
2. Now press Power and Vol DOWN together. if it doesn't do anything let go of power button but keep the Vol DOWN, It should come up with a menu. Let go of Vol DOWN and tap it until you get to the option that says RSD mode, then press Vol UP.
3. Connect your device to the computer. RSD Lite should show a device on slot 1. Click it then press START. now browse and find the fastboot files the click Decompress and flash.
4. DO NOT TOUCH THE PHONE. DO NOT TOUCH THE PHONE. DO NOT TOUCH THE PHONE. DO NOT TOUCH THE PHONE.... oh yeah, one more thing. DO NOT TOUCH THE PHONE!
5. After its done, VIOLA. Stock phone. Re-Root. Reinstall SafeStrap. golden!