Right side of screen noticeably darker than the rest - Verizon Samsung Galaxy S 4

I already had this problem once and I switched my phone withing 14 days. Now I am witnessing it again, within a week as well. It looks like it might be the S-Cover causing it, because it's in the same exact place. I removed the cover and I hope it reverts the issue. It wasn't like this the night I got the replacement.
It's not noticeably darker or brighter but looks like there is a constant gradient across the left to right of the screen if something is displayed.
Does anyone else notice this on their screens? I see it easiest with a dark background (but not black) at a very own brightness level. I removed the S-Cover and I'll check back tomorrow morning to see if that remedied it.
Sent from my SCH-I545 using Tapatalk 4

Bonisaur said:
I already had this problem once and I switched my phone withing 14 days. Now I am witnessing it again, within a week as well. It looks like it might be the S-Cover causing it, because it's in the same exact place. I removed the cover and I hope it reverts the issue. It wasn't like this the night I got the replacement.
It's not noticeably darker or brighter but looks like there is a constant gradient across the left to right of the screen if something is displayed.
Does anyone else notice this on their screens? I see it easiest with a dark background (but not black) at a very own brightness level. I removed the S-Cover and I'll check back tomorrow morning to see if that remedied it.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Its not the dark spots found in OLEDs in general is it. I know that from sitting on my gnex it caused dark spots where the pressure was applied. Could the cover be putting pressure on it when you sit?

tripartist1 said:
Its not the dark spots found in OLEDs in general is it. I know that from sitting on my gnex it caused dark spots where the pressure was applied. Could the cover be putting pressure on it when you sit?
Click to expand...
Click to collapse
Sounds like it then, but I'm pretty careful about how I leave it in my pocket. I never put it in the back pocket but I wear something pretty slim fitting clothing sometimes.
Sent from my SCH-I545 using Tapatalk 4

Did some searching and it turns out, a lot of people are have issues with their screen on the S4... anything from ghosting to turning pink... Some say it could be the screens themselves, while others think its botched up code... I would do one more trade in, if possible, take a picture of the new screen, not use the cover for a few weeks, take a picture then, then use the cover. if it happens now, you have proof its related to the cover... you can then give sammy a call and go from there.

tripartist1 said:
Did some searching and it turns out, a lot of people are have issues with their screen on the S4... anything from ghosting to turning pink... Some say it could be the screens themselves, while others think its botched up code... I would do one more trade in, if possible, take a picture of the new screen, not use the cover for a few weeks, take a picture then, then use the cover. if it happens now, you have proof its related to the cover... you can then give sammy a call and go from there.
Click to expand...
Click to collapse
Thanks. I'm making the exchange (again) today. I really like my S-View cover, but I'm feeling less and less inclined to use it since it's showing the same exact pattern as last time... I'll do what you say and try it case free for 2 weeks with the pictures. I guess I'll pick up a Otterbox Commuter case then.

Bonisaur said:
Thanks. I'm making the exchange (again) today. I really like my S-View cover, but I'm feeling less and less inclined to use it since it's showing the same exact pattern as last time... I'll do what you say and try it case free for 2 weeks with the pictures. I guess I'll pick up a Otterbox Commuter case then.
Click to expand...
Click to collapse
Good choice. Pretty slim case and offers good protection. Its one of three cases I use.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.

Related

Streaks in screen

It may be hard to see in the picture, but my phone has streaks or ripples inside the screen. I noticed the problem day one before putting on a screen protector. Does anyone else have this issue or do I have a defective device?
If you're referring to the pyramid looking shapes "underneath" your screen that you can only really see from a side angle...that is what allows you to see the 3d images...if you're not referring to those...then we need a better pic, because there's too much going on in your current one to tell what could be a flaw
Ericj09 said:
It may be hard to see in the picture, but my phone has streaks or ripples inside the screen. I noticed the problem day one before putting on a screen protector. Does anyone else have this issue or do I have a defective device?
Click to expand...
Click to collapse
It's tough to see exactly what you mean, but I think I see what you're talking about. The flash reflection makes it difficult to see. Anyways, if it's not the screen protector causing it, then I'd probably say it's defective. I have no flaws or blemishes in my screen at all. I'd take it to Sprint and get it checked out.
normal...stop looking at your phone in unusable angels under bright lights and you should be ok and never see it.
I do apologize for the lousy pic. I was reading about the 3D tech in the screen and understand that is there. Instead of my screen being solid black when it's off, it has random marks that kind of look like stretch marks. In a dark room its unnoticeable however at work(where it's bright as crap) I can actually see the lines while the screen is on. Couldn’t find any info on this anywhere.
I had the same thing on my first E3D and the guy at sprint thought I was crazy. You can only see them at the right angle so they are not noticeable 85% of the time. When I got my hands on a second E3D and held it just right the guy saw the same thing and did a return. No problems with the screen on my new one.
Mine is evident at any angle. I hate to complain, but I'll have this phone for over 2 years so I think I'll convince my sprint store to trade it out again. First one had large dust, dead pixels, majorly tilted screen. For me if I didn’t notice it all the time at work then it wouldn’t be an issue, but I do.
My friend had **** appear under his screen.... I want to say it looked like liquid, but it was very uniform and the water sticker things had not been tripped. it could only be seen under bright light such as the sun. Needless to say he returned it, the store employee said he had never seen it before.
Sent from my PG86100 using Tapatalk
The original EVO had those ripples as well.....I happen to think thatsthe gorilla glass on the top.....I noticed that a long time ago with my OG EVO.....and I had 5 of em LOL......but yeah....not.doubting ya Vin.......but remember that from before.....
Sent from my PG86100 using XDA Premium App
reverepats said:
The original EVO had those ripples as well.....I happen to think thatsthe gorilla glass on the top.....I noticed that a long time ago with my OG EVO.....and I had 5 of em LOL......but yeah....not.doubting ya Vin.......but remember that from before.....
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Slightly, but nowhere near as prominent and uniform as with the 3d. You had 5 bad phones homie!
Thanks guys I appreciate the feedback. I researched all over the internet and could not find a reasoning behind these so called water marks or stretch marks under the screen. It must have something to do with the way HTC melds the screen together. Anyway I'm going to the sprint store today to see if they will work with me as it is obviously a defect. Seems to be an extremely rare issue so far or no one has noticed. Unfortunately for me where I work we have very bright lights so I noticed it right away. As with any product there seems to be a few bad batches of these phones out there. Hopefully number 3 will be near perfect.
Here's a slightly better pic
Perhaps you could clean the screen and then post a fresh pic. I'm having a difficult time discerning smudges from what you're referring to.
Do you have a screen protector on your phone?
Me and 3 friends have 3d's. Every one has the same thing, if you look at them from the side, almost 90 degrees, you can see a texture to the glass, and it almost seems like you would be able to feel it, but I believe its just the gorilla glass resin.
Sent from my PG86100 using XDA Premium App
SAShady said:
Me and 3 friends have 3d's. Every one has the same thing, if you look at them from the side, almost 90 degrees, you can see a texture to the glass, and it almost seems like you would be able to feel it, but I believe its just the gorilla glass resin.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
We discussed those textures (see my first post in thread), but those are not what he's referring to
The screen was totally clean in the new pic. Yes I have a stick on screen protector and it has no effect on my problem. I realized I couldn't whipe the streaks out before I put it on.
Vinchenzop said:
Slightly, but nowhere near as prominent and uniform as with the 3d. You had 5 bad phones homie!
Click to expand...
Click to collapse
lol.....I KNOW IT SOUNDS EXTREME, but i got my first one since launch...so yes, thru all the time up till i got my 3D i had 5.....i know 2 i dropped in paint at work....woo-hoo....LOL. hmmmm, i dunno it seemed to me that the ripples looks the same on both, but hey, i could be wrong.
EDIT....and im talking about the ripples....not scratches..i dont think scratched would be there by default
I would take it in. I can clearly see what you're talking about, and mine definitely doesn't have any kind of vertical streaking like that.
Okay, if the screen was clean in that last pic, I think I see what you're talking about now. The darker lines that almost look like a fingernail drew them? And you're sure they aren't between your screen protector and the glass? I'd take it back, that's not right.
Sent from my EVO 3D using XDA App

[Q] Strange screen problem

Hello everyone!
I'm new here, and don't normally post on forums about technical issues (too nervous!) but something very odd came up on my Galaxy s2 today and my google-fu has failed me so far in finding anything similar.
I got it at the beginning of September this year, keep it in one of those leather wallet cases to protect it (and a screen protector), and during the day it mainly just sits on my desk at work. For some reason however, today, this just appeared (see attachments).
It's a small, lilac-purple smudge in the lower right hand corner. It doesn't move when the screen moves, and the touchscreen still works just fine. You can also still see images below it, it just tints them purple. It's less visible when the screen is brighter, but still kind of there.
I have turned it off an on again, turned it off and removed the battery, and left it off for a while to cool down. It was still there when I turned the phone back on.
As far as I know there is no water damage, and I don't believe it has been in contact with any magnets (apart from the mini one that clasps the case shut). I'm completely baffled! Is it a defect, or something I've somehow managed to cause? I've tried to be very careful, as I know what a klutz I am! The phone is also not rooted or hacked in any way.
If anyone has any thoughts or advice, I would greatly appreciate it!
Thank you very much
I think is magnet
Sent from my GT-I9100 using xda premium
I wondered the same thing, but I left it on a table next to my bed overnight and it seems to have gotten worse - the purple has spread further on to the screen.
muhamet said:
I think is magnet
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
+1
to which is why never used a case with magnet.
OP:
It will get progressively worse even if magnet is no where near now.
The purple tint on the entire screen is definitely a defect... get it changed from the Samsung Service Centre! Even I had this problem and my phone atm is at the Service Centre...
There are lot of quality control issues with the SGS2 display...
Never a Samsung again!

"TXTING AND DRIVING - - - IT CAN WAIT" permanent imprint on my screen.

I was so happy with my Note. Great battery life, fast response, minimal/no black crush... and then something caught my eye when I loaded up the Google Play app. For a split second while the background was changing, I noticed the faint imprint of the "Texting and driving it can wait" sticker that comes affixed to the phone when I first bought it. I thought I was seeing things.
Then I loaded up the S-Memo app where it has a tan background and is easy to see screen damage. I deleted my s-memos to get a clear picture of the screen, and sure enough I clearly see the entire imprint of the sticker that comes affixed to the phone. I tried cleaning it, rubbing it, yelling at it, and nothing made it go away, It's permanent. I don't even drive!
What the hell?! Has anyone else noticed this? Try it -- go into your S-memo app and delete enough of your picture memos so the tan background is showing. Anyone else have screen damage?
I apologize for the tone of my first post -- this is already my first replacement Note as the first had a dead/hot pixel cluster that was instantly visible upon powering up the phone.
Off to Best Buy tomorrow to get a replacement.
Edited to include a photo of the issue.
Wow just checked mine and its not there go return it thats beat
Sent from my SAMSUNG-SGH-I717 using XDA Premium App
No inprint here.
Easy solution to this though, just take it back and get a new one. At least I hope it didnt take you more than 30 days to notice this.
im sorry.. that is HILARIOUS
you can get a new one though. do it up man. this phone is GREAT.
Lol.
Sent via tapatalk using the Samsung Galaxy Note
How does that even happen?
It's not residue on the screen is it?
Guess they were trying to get there point across lol. I would try Goo Gone before returning it.
Goo gone is sone amazing stuff, but I personally try to not use chemicals on any electronics anymore... too many companies are using exotic films on the glass these days. If your return wont be that hard, i'd just do that.
Sent from my SAMSUNG-SGH-I717 using XDA
wtf? How would that even happen? It's just a vinyl sticker!
Naw man, that's whack - go exchange it. I can't even imagine what that phone went through to get a permanent imprint from the sticker on it.
Er.... have you removed the sticker..???
Sent from my SAMSUNG-SGH-I717 using XDA
You know your note is a really Smart phone if its trying to tell you something. On a serious note, hope you got an exchange from BB.
-Once you go NOTE, you'd say 4 inches a Joke
How could this possibly happen? Because it's not like it's stencil letters, it comes on one vinyl strip
Only way I could see this happening is if you left the sticker on and set it outside in the sun for days
Exchange it!
Or try Mr. Clean's Magic Eraser
I would just replace it. Using any form of chemical or magic eraser could potentially cause damage, which could void your warranty. My experience with Best Buy exchanges, they are really good about it, as long as there is no damage to the device. It's not worth the risk. It sucks that this happned to you, but you have to admit, of all the possible flaws on a phone, you got the king of them all.
Sent from my Galaxy Note (SGH-i717) using XDA Premium.
After seeing this thread I had to check mine (doesn't appear on mine).. That is one freakish issue and definitely should be exchanged.
Keep us informed on how you make out.
No way would I even attempt to clean it, just return it.
To answer some questions: Yes, I took the sticker off, but only after using it with it on for a couple days until my screen protector arrived. I was very careful about using it and, this may not show in the picture, but the ENTIRE protector is imprinted on the screen INCLUDING the border.
I truly have no idea what caused this, my only guess is a manufacturing defect. Off to Best Buy now. I'll report back with my non-cursed Note *knocks on wood*
Also, thanks to you all for the many lulz this thread has provided me in my "fist-world sorrow."
Dude!

			
				
demigodchewtoy said:
To answer some questions: Yes, I took the sticker off, but only after using it with it on for a couple days until my screen protector arrived. I was very careful about using it and, this may not show in the picture, but the ENTIRE protector is imprinted on the screen INCLUDING the border.
I truly have no idea what caused this, my only guess is a manufacturing defect. Off to Best Buy now. I'll report back with my non-cursed Note *knocks on wood*
Also, thanks to you all for the many lulz this thread has provided me in my "fist-world sorrow."
Click to expand...
Click to collapse
You're joking right? You used the phone with it on there for a couple of days and are wondering why the image is burned into your phone?? Even going as far as saying your not is cursed?
My guess: You left the TXT & Drive sticker on there while using it, and the heat generated from the phone on the screen made it rub off. (like iron on graphics on a shirt). To make it worse, you put a screen protector on it further locking in the imprint for several more uses.
Mystery solved?

Loose glass around edges of TF201

I was just wondering if anybody else has an issue with loose glass panel towards the edges of your asus transformer prime? In particular folks who just purchased one. There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker and to a lesser extent on the right side. It's not a lot, but noticable since that's right where you normally hold it.
I already exchanged it for another one at Office Depot, and this new one has the exact same issue. I can't imagine this would be "normal." Maybe just a defective batch? In either case, I haven't noticed any other issues in the 2 days I had the first one.
They both started with S/N# C30KAS...
C1O from office depot reporting in. Have the exact same issue, right out of the box. My case does make it unnoticeable, though. I'd hate to have to rma it for this.
It is not normal. There are little hatches which hold glass to the frame. If they are broken (they are very thin, I guess they can easily be broken on assembly line) there is no way to fix it apart from taking it apart completely and putting some double sided tape. I would, and did, return it.
Sent from my HTC Sensation Z710e using xda premium
omegafiler said:
There is about a 1/4" of play mostly at the top/left side of the screen around the volume rocker
Click to expand...
Click to collapse
Do you realize how much that is? (I assume you mean a quarter inch)
I would just return it.
Yes, it's about a quarter inch. Unfortunately it seems as though these 2 were the last in stock... anywhere. But that's kind of what I thought; just seemed odd to have 2 in a row like that. I guess I'll play with it for a few more days to make sure I still like the TF201 in general and return it later (within the return window). Or maybe if they get a new batch in... exchange it again.
I like to see a picture of this. Quarter inch is really massive.
htcplussony said:
I like to see a picture of this. Quarter inch is really massive.
Click to expand...
Click to collapse
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
omegafiler said:
Yeah, it wasn't good, but it's returned now. Although this 2nd one isn't nearly as bad. In fact, it's only loose on the right side. This is probably closer to an 1/8". So it's doesn't go above the outter bezel.
But I guess the question is whether folks consider any play whatsoever acceptable, normal, or something they even care about. In particular if it's in a case. Not to mention the concern that it might get worse or seperate completely.
Click to expand...
Click to collapse
On a good unit there is no play. Actually, there is, but it's so small that you have to be looking for it and even then you'd struggle to find it.
Sent from my HTC Sensation Z710e using xda premium
Had it on a C0 along with light bleed and lint inside the glass...return it 2 days later. Talk about QC...
Sent from my GT-I9100 using XDA
Hmm, maybe I'm just being more picky given the much worse amount of seperation I had with the first device. So here is a quick video I just shot with my phone. Not the best quality, but maybe you guys with "good" primes can let me know what ya think.
Edit: Embed didn't work, so here is the private link.
http://youtu.be/xV6IE16Dj2o?hd=1
I'm having the exact same problem, mine also makes an audible "squeek" when pressed, and the compression is definitely visible. The difference though is that mine came back repaired from when I sent it out for RMA, not a replacement. I'll be getting on the phone tonight with them, as the screen is now also starting to display Mura (which it was sent in for the first time I RMA'd it.), and the screen bleed is getting notibly worse to the point where it is very annoying.
mine is also loose in the upper left hand corner area when held in landscape.
On mine there's still lots of areas I can press down but its under 1mm.
I'm more bummed about dust I now see under the screen. Doesn't Apple laminate the lcd to the screen? Wish Asus done it.
i have the same issue. My wife noticed it and I decided that I could live with it.
Sent from my Transformer Prime TF201 using XDA
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
goodintentions said:
To me, this is not a defect. It's definitely an imperfection, but it's not a defect.
Click to expand...
Click to collapse
I see it kinda the same way... I only notice it from time to time in landscape mode. But sometimes I have to test the whole side to find the spot again.
I'm having a really great time with the device, can't think about returning it for for this imperfection.
I've got the same problem albeit the flex is very small.
Well, I decided to at least order a MoKo folio cover case and see if that minor flex is still going to be an issue for me or not. I already don't like the way it feels carrying it around by itself. The edges make it feel somewhat awkward and uncomfortable. So maybe the case is all it needs. Because other than that, I haven't found any other issues, yet.

Nexus 10 with different screens.

I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
BamAlmighty said:
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
Click to expand...
Click to collapse
Samsung's the single source for the LCD panel. If there are big variations between them it's because the tolerances on the production line are off and their slipping through QC. Some deviation from panel-to-panel is normal. If you put three SGS3's side-by-side each will have a slight variation in temperature. But what you're describing doesn't sound slight.
BamAlmighty said:
I ordered a replacement N10, because of back flex and got it today.
Not only is the back flex worse, the screen looks worse. Compared to my original N10 the replacement looks duller. My original N10 by far looks more vibrant while the replacement has a noticeable warmer and duller color temp.
Back the replacement goes... I will live with the back flex. I really don't want to play exchange roulette like I did with the nexus 7. Those of you considering exchanging your Nexus might want to consider you might get a worse one.
Click to expand...
Click to collapse
I think I had a similar issue to you, but for the better.
My replacement arrived yesterday as my original device had bad back flexing
The new one has a much more vibrant and brighter screen than the old one (the autobrightness seems to react much faster and ramps the brightness more appropriately)
The replacement came shipped with build JVP15L, so I had to two updates, one to JOP20C and then again to JOP20D, weird huh?
Sent from my HTC Desire S using xda premium
so your telling me you got two devices without light bleed? I can't even get one out of them.
This is somewhat good news as I seem to have a warmer screen and also suffer from light bleed so I'm probably going to get it exchanged. Hoping I get a replacement with a neutral or cooler screen. neutral or cooler toned screens tend to have better contrast for some reason vs the warmer screens.
Sent from my Transformer Prime TF201 using Tapatalk 2
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
Yeah my first device had quite severe bleed in 3 corners, but my replacement has ever the slightest amount in the bottom corner, but its really not noticeable, even on a black background, so I'm gonna keep this one
Sent from my Nexus 10 using Tapatalk HD
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
First unit which I kept has very little light bleed, nothing significant. The replacement had horrible light bleed, there were light streaks coming from the lower right corner.
Other than back flex, I am happy with my N10's screen.
I thought the same about my device but then I turned my brightness up and took it off automatic brightness. I can hardly believe that the difference is that stark between the two units
Sent from my Nexus 10 using Tapatalk 2
Back flex????
Sent from my Nexus 10 using xda app-developers app
muyoso said:
Back flex????
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Sent from my Nexus 10 using Tapatalk 2
TheEmpyre said:
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
It is considered a defect because normally the internal components should touch the inside of the casing, so there is no cavity between the two and therefore no flexing when pressed .
In the case of the flexing units, the casing is bowed ever so slightly outwards, thus creating a cavity, so the casing flexes inwards up until it touches the components inside.
Sent from my Nexus 10 using Tapatalk HD
Hereisphilly said:
It is considered a defect because normally the internal components should touch the inside of the casing, so there is no cavity between the two and therefore no flexing when pressed .
In the case of the flexing units, the casing is bowed ever so slightly outwards, thus creating a cavity, so the casing flexes inwards up until it touches the components inside.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Is it actually a "bow" or is it just an air gap between the battery and the back? Mine flexes when I press it, and makes a "click" like glue forcibly coming unstuck when I release.
It's hardly the end of the world though. I'd never have realised it until it was mentioned on XDA because I'm not heavy handed enough to go squeezing it, nor would I have had cause to "press" hard on the back of it while it's lying face down.
alias_neo said:
Is it actually a "bow" or is it just an air gap between the battery and the back? Mine flexes when I press it, and makes a "click" like glue forcibly coming unstuck when I release.
It's hardly the end of the world though. I'd never have realised it until it was mentioned on XDA because I'm not heavy handed enough to go squeezing it, nor would I have had cause to "press" hard on the back of it while it's lying face down.
Click to expand...
Click to collapse
Mine was both, a bowing which caused an air gap. It didn't click at all, just flexed even when i was just holding it as the bowing was greatest directly underneath where you place your fingers. If i looked edge onto the tablet from the top, the bowing was apparent.
Figured seeing as i'm paying for it, wanted a perfect device and Google were happy to replace it, why not get it replaced?
Hereisphilly said:
Mine was both, a bowing which caused an air gap. It didn't click at all, just flexed even when i was just holding it as the bowing was greatest directly underneath where you place your fingers. If i looked edge onto the tablet from the top, the bowing was apparent.
Figured seeing as i'm paying for it, wanted a perfect device and Google were happy to replace it, why not get it replaced?
Click to expand...
Click to collapse
Indeed, why not. I would have done the same thing.
joke
Now all of you shut up, before I go poking around mine any more and realise I'm not happy with it and end up sending it back for replacement :laugh:
/joke
I feel bad for you people searching for the perfect device. Chances are, the people on their 3-4-5th return are never going to be satisfied, and the devices they returned would most likely have been perfect for someone else. Having OCD about a mechanically flawless techno-gadget is like a Heroin addict chasing the dragon.
Sent from my Nexus 7 using Tapatalk 2
TheEmpyre said:
Yeah if you push hard enough on the back of your device it will dimple inward. I can't really see in my mind why this is considered even remotely a functional defect lol. This just in: plastic flexes when you push on it
Click to expand...
Click to collapse
Shocking news. This flex thing is like that old joke -
Patient: Doc, it hurts when I do this. (Patient flexes a joint.)
Doctor: Then don't do that.
Semantics said:
I feel bad for you people searching for the perfect device. Chances are, the people on their 3-4-5th return are never going to be satisfied, and the devices they returned would most likely have been perfect for someone else. Having OCD about a mechanically flawless techno-gadget is like a Heroin addict chasing the dragon.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I wonder how much cheaper our gadgets would be if hordes of people on XDA didn't RMA 5-6 times because they go actively looking for defects they wouldn't notice otherwise?
I've been thinking about this all day. My N10 has some ripples around the detachable rear cover that I hadn't noticed until looking at the photos in this thread. Is it obvious when I show it to others? No. Does it affect operation in any way? No. Have my fingers ever felt the ripples as I use it or rotate viewing mode? No.
So why are the cosmetics such a big deal to some and not others? Obiously some rate the appearance of the device to be more important than what it does. I know I'm going to get flamed big-time for this, but worship of form over function seems to be a common trait of the Apple crowd. I truly appreciate beauty, but not so much in a tool. I used an iPad for a year and always felt like I was using a fine watch: attractive, but not adaptable to what I wanted to do. Those of us that value function more will probably never understand the other way of thinking.
tcb4 said:
so your telling me you got two devices without light bleed? I can't even get one out of them.
Click to expand...
Click to collapse
Mine has ZERO light bleed and I know all about that. I use to own 3 Infinity's and that's because the first two had intolerable light bleed the third I just lived with.
I'm guessing google sacrificed build quality so they could keep prices down -- Dont really understand why it is important for your device to "look" cool when the purpose of the device is media consumption / productivity. Besides, I would bet upwards of 60% of consumers get a case for their device...whats the point of that back-flex when you have a hard shell case?

Categories

Resources