Related
I have a Droid Razr Maxx. I recently attempted to install 4.2.2 using Safestrap and it failed. It would just go in cycles of going to safestrap and restarting. I am now trying to restore my phone so that i can use it again. I cleared the cache/dalivk/and wiped, thinking that it would remove the recently installed file. When I go to reboot in safestrap it says there is "No OS installed". I think I bit off more than I can chew and really don't understand the advanced issues of installing roms from safestrap apparently. I definitely will not be trying this again. Would someone please be able to help me. Should there be a file I could use on the system to re install the stock rom? can I even transfer a file from the computer to my sd card, if all I can do is turn it on to safe strap..Desperate as I work in a hospital and this is necessary for communicating about patient care. Obviously I know I shouldn't have done this. Thanks you so much for any help.
I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Factory reset Last option
snowman4839 said:
I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Click to expand...
Click to collapse
if nothing works, factory-reset but last option.
yeah I just started downloading the stock rom to flash with ODIN in the morning. I just wanted some reason why this would happen so I won't always have have this problem and to know why it only works with some roms over others.
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Zothar said:
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Click to expand...
Click to collapse
I restored to stock using these files http://www.sxtpdevelopers.com/showthread.php?t=237 to flash through ODIN. Rerooted by flashing the older kernel, rooting, installing superSU, then reflashing the newer kernel (normal root procedure). Then I insatlled ROM Manager and gave it root to install CWM recovery. Then I flashed to my same Hyperdrive ROM I was using before and now everything works beautifully. Nothing gets stuck anywhere an no more "cannot mount /data"
Just use that site and restore to stock and everything should work fine.
I'd like to add some confirmation to this. I had similar problems after flashing my first ROM- phone wouldn't reboot a second time, and when I attempted to make nandroids the files would be ridiculously large (~1 TB). I restored to the stock Touchwiz, rerooted normally, and reflashed normally. The strange thing is that I did the rooting and the flashing with the same files I had used the first time, implying something went wrong during the first rooting/flashing process.
Hey all, just ran into some trouble trying to flash CM-10.2.1 onto my Droid Razr xt912
powered down and booted into recovery, luckily i backed up the stock rom, wiped the stock rom, and tried to flash the .zip file....the program said that the operation was successful, but upon rebooting, no OS loaded up...
the weird thing is that when i was testing out the release to see if i wanted to replace my stock rom, i loaded it onto a partition via safestrap and it seemed to work just fine..
anyone else have the same problems? can anyone think of anything i have done wrong? any help would be greatly appreciated. i realize that this post is slightly vague and i dont know much about flashing roms or anything, only what i have read online. so please by all means ask me anything! i am greatly interested in this ability of the android devices and am wanting to learn as much as possible!!!
thanks again in advance for any help
From what I've read it needs to be loaded onto a partition so if it works you did it right
bendaily2000 said:
Hey all, just ran into some trouble trying to flash CM-10.2.1 onto my Droid Razr xt912
powered down and booted into recovery, luckily i backed up the stock rom, wiped the stock rom, and tried to flash the .zip file....the program said that the operation was successful, but upon rebooting, no OS loaded up...
the weird thing is that when i was testing out the release to see if i wanted to replace my stock rom, i loaded it onto a partition via safestrap and it seemed to work just fine..
anyone else have the same problems? can anyone think of anything i have done wrong? any help would be greatly appreciated. i realize that this post is slightly vague and i dont know much about flashing roms or anything, only what i have read online. so please by all means ask me anything! i am greatly interested in this ability of the android devices and am wanting to learn as much as possible!!!
thanks again in advance for any help
Click to expand...
Click to collapse
Earlier CM 10 builds had a restriction. They can only be flashed on the Slot 1 using Safestrap. This was removed in CM10.3 so if you are trying to flash CM 10.2, you need to use only slot 1.
PS: The update script says that in flash process too.
Requesting help. I am not a noob by any means, I have installed custom roms many times, and rooted many phones, and installed and used safestrap on several phones, but I cannot get ANY custom rom to install properly on my Verizon Samsung Galaxy S4, which is (was) rooted, with Safestrap 3.72, and MK2 firmware.
I was running the stock 4.3/mk2 firmware, with the latest busybox and supersu, and the latest safestrap, and safe root installed. I was able to successfully root the phone, and install safestrap, but even when I created a rom slot, gave it a name, wiped it completely, and then try to install one of the many 4.3/mk2 "Safe" roms, no rom will boot, once installed. It is so frustrating! I read somewhere that with the Verizon S4, and MK2 firmware, you could only install a rom in the stock rom slot, so I tried that, and now safestrap is gone, and the phone boots to a light blue screen with little green checkmarks. So I'm in the process of downloading the original MK2 firmware from Samsung and using Odin to restore. Anybody have any ideas? I'm thinking of quickly getting rid of the S4 while it still has some value.
mactechnm said:
Requesting help. I am not a noob by any means, I have installed custom roms many times, and rooted many phones, and installed and used safestrap on several phones, but I cannot get ANY custom rom to install properly on my Verizon Samsung Galaxy S4, which is (was) rooted, with Safestrap 3.72, and MK2 firmware.
I was running the stock 4.3/mk2 firmware, with the latest busybox and supersu, and the latest safestrap, and safe root installed. I was able to successfully root the phone, and install safestrap, but even when I created a rom slot, gave it a name, wiped it completely, and then try to install one of the many 4.3/mk2 "Safe" roms, no rom will boot, once installed. It is so frustrating! I read somewhere that with the Verizon S4, and MK2 firmware, you could only install a rom in the stock rom slot, so I tried that, and now safestrap is gone, and the phone boots to a light blue screen with little green checkmarks. So I'm in the process of downloading the original MK2 firmware from Samsung and using Odin to restore. Anybody have any ideas? I'm thinking of quickly getting rid of the S4 while it still has some value.
Click to expand...
Click to collapse
3.72 is for 4.4 KitKat and was made for the AT&T version of the S4, therefore, you are not able to create slots. You would need to install 3.71 and only flash 4.3 based roms. If you want 4.4 based roms you need to upgrade to NC5 and install 3.72, but you are only able to flash to the stock side.
There's plenty of info for you to read in the General section.
riker147 said:
3.72 is for 4.4 KitKat and was made for the AT&T version of the S4, therefore, you are not able to create slots. You would need to install 3.71 and only flash 4.3 based roms. If you want 4.4 based roms you need to upgrade to NC5 and install 3.72, but you are only able to flash to the stock side.
There's plenty of info for you to read in the General section.
Click to expand...
Click to collapse
Thank you for your response. Actually what I failed to mention is I did have 3.71 installed first, and I had the exact same problem. So it's not an issue with the safestrap version. And I have tried about 12 different ROMs. Including BajaROM-S4-Release-v-2.2 and BoneStock4.3_S4v2.1. As I said, I'm not a newbie at all, and I'm not about to hunt and peck for information again (which is what I've been doing for two days now). I wouldn't have asked for help if I had been successful in my search.
I have never had an issue installing any safestrap compatible rom...3.72 is strictly for android 4.4 and no rom slots...so no way you would ever get a rom installed using 3.72 on MK2 base build. As for 3.71...never heard of any issue with SS compatible roms for 3.71 not installing right. Really difficult to figure out what you are doing wrong from what you are giving us...
sent by safestrap powered echo v26
decaturbob said:
I have never had an issue installing any safestrap compatible rom...3.72 is strictly for android 4.4 and no rom slots...so no way you would ever get a rom installed using 3.72 on MK2 base build. As for 3.71...never heard of any issue with SS compatible roms for 3.71 not installing right. Really difficult to figure out what you are doing wrong from what you are giving us...
sent by safestrap powered echo v26
Click to expand...
Click to collapse
Again, thanks for your help. I'm going to start with Odin. Wipe it all clean and start over. That's always the best option. Thanks!
basically, I'd follow this:
http://forum.xda-developers.com/showthread.php?t=2763834
I'd go back to MK2, root, BB, SS 3.71. Then go up to NC5 ROMs with SS 3.72. Wiping EVERYTHING along the way, system included, not just factory reset
Similar Issue
I not a noob either im very familiar with how this whole operation works.
I have a very similar issue as well I'm (unable to flash roms including my own recovery). I'm 100% knowledgeable on CM, but when it comes to Safestrap or TWRP base Recoveries I'm far from noon but not an expert so to say... Here's my issue. I have the NC5 firmware and once had the Hyperdrive RLS17.1 KK S4 Final.zip... I went back to the I545VRUFNC5-Stock-Root-Deodex.zip.... I recently attempted to download another ROM, (based on the same firmware of course) as soon as I attempted to flash it (which only took about 1 min and didn't work) I figured something was wrong. So I just decided to go back to my recovery that I've made a few moments ago. When I tried to do that. The msg " E: Unable to mount '/system' " appeared.
Now I've notice since then Wiping and Flashing return the same results.
There is no longer an OS on my S4... I can not Mount the System.
So I believe in stuck in Safestrap 3.72.
(Please let me know what other info you need, I spent the last couple of days trying to figure this out on my own, so far I'm losing the battle)
Please help guys.
same problem
mactechnm said:
Requesting help. I am not a noob by any means, I have installed custom roms many times, and rooted many phones, and installed and used safestrap on several phones, but I cannot get ANY custom rom to install properly on my Verizon Samsung Galaxy S4, which is (was) rooted, with Safestrap 3.72, and MK2 firmware.
I was running the stock 4.3/mk2 firmware, with the latest busybox and supersu, and the latest safestrap, and safe root installed. I was able to successfully root the phone, and install safestrap, but even when I created a rom slot, gave it a name, wiped it completely, and then try to install one of the many 4.3/mk2 "Safe" roms, no rom will boot, once installed. It is so frustrating! I read somewhere that with the Verizon S4, and MK2 firmware, you could only install a rom in the stock rom slot, so I tried that, and now safestrap is gone, and the phone boots to a light blue screen with little green checkmarks. So I'm in the process of downloading the original MK2 firmware from Samsung and using Odin to restore. Anybody have any ideas? I'm thinking of quickly getting rid of the S4 while it still has some value.
Click to expand...
Click to collapse
im having the same problem i am also frustrated i don't know what to do
Similar Issue
I know there must be a way... If only I can get it to mount the "system" and "systemorig"...
I'm going to play around with the Slots and the datas Size's and see what I come up with.
Pretty sure you will need to Odin the stock NC5 image and start over.
Sent from my SCH-I545 using Tapatalk
jmgib said:
Pretty sure you will need to Odin the stock NC5 image and start over.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Oh ok. The Stock NC5 image... Great.
Where can I find the stock image?
If possible, could you please send a link?
Thanks in advance
damien302 said:
I not a noob either im very familiar with how this whole operation works.
I have a very similar issue as well I'm (unable to flash roms including my own recovery). I'm 100% knowledgeable on CM, but when it comes to Safestrap or TWRP base Recoveries I'm far from noon but not an expert so to say... Here's my issue. I have the NC5 firmware and once had the Hyperdrive RLS17.1 KK S4 Final.zip... I went back to the I545VRUFNC5-Stock-Root-Deodex.zip.... I recently attempted to download another ROM, (based on the same firmware of course) as soon as I attempted to flash it (which only took about 1 min and didn't work) I figured something was wrong. So I just decided to go back to my recovery that I've made a few moments ago. When I tried to do that. The msg " E: Unable to mount '/system' " appeared.
Now I've notice since then Wiping and Flashing return the same results.
There is no longer an OS on my S4... I can not Mount the System.
So I believe in stuck in Safestrap 3.72.
(Please let me know what other info you need, I spent the last couple of days trying to figure this out on my own, so far I'm losing the battle)
Please help guys.
Click to expand...
Click to collapse
shonnick01 said:
im having the same problem i am also frustrated i don't know what to do
Click to expand...
Click to collapse
I only just saw these posts, I have not been on here for a week or so but if you are still having issues... As far as what went wrong to begin with, did you factory reset/advanvanced wipe all but the internal sd before flashing? Are you only installing into the 'stock' slot on SafeStrap? As far as the fix, if you are suck in Safestrap, you will need to boot into recovery mode, if possible and wipe/factory reset and then boot into download mode and flash one of these http://forum.xda-developers.com/showthread.php?t=2735172 in Odin.
liljoe727 said:
I only just saw these posts, I have not been on here for a week or so but if you are still having issues... As far as what went wrong to begin with, did you factory reset/advanvanced wipe all but the internal sd before flashing? Are you only installing into the 'stock' slot on SafeStrap? As far as the fix, if you are suck in Safestrap, you will need to boot into recovery mode, if possible and wipe/factory reset and then boot into download mode and flash one of these http://forum.xda-developers.com/showthread.php?t=2735172 in Odin.
Click to expand...
Click to collapse
Thanks a lot man. The is has been resolved...
I had to Odin the stock NC5 (exactly what you've just mentioned in your response.) I had to flash it twice actually. The first time only took about 3 mins. I then tried to restore my backup, but during the time it restari SS (when the flash was approximately 90% done) I then went to restart the system and then received the notice "No OS loaded). So I wiped all except my SD card and then I just thought to myself to just try and Odin the stock NC5 one more time (it was getting late and I was about to give up). On the 2nd attempi it took almost 3 times the length as before (15-20mins) when it finished, it bypass the " unlock Samsung screen " and displayed the stock splash screen and audio then the Verizon screen. ( I was happier the a crackhead at a free crack-give-away)...
So I want to thank you for responding, I was determined not to give up,, and it was really close before I was about throw in the towel... Thanks a bunch. (You're response was exactly what I did last night)... I was about to update my issue as soon as I fixed it las night was it was so late and I was really sleepy, then I wake up to your message with the exact fix.
Thanks a lot ☺☺
So I originally had issues with my S4 when it updated to 5.0 I got a new one from the inusrance company and i wanted to root and rom it right away. Well it took me a wile to root it, I had to find the right (or what I thought was the right) Kernel's to use. I rooted it finally with Towelroot, I then tried to install TWRP and reboot to recovery and load a Rom, however my phone will never reboot to recovery now. It will only reboot to download. TWRP does not seem to work and if I mess it with it it will reboot to download and it won't do anything ells until I use Odin to reinstall the Kernel. If I try the button combo to reboot to recovery it still reboots to download. So I think that keeps me from using SafeStrap as well.
I am at a loss, I just want to get the Hyperdrive+RLS21+KK+S4 Rom on my phone so I don't get the stupid 5.0 that ruins my phone. Is there anyone who can help me out with this? Also I did try to do a factory data reset and that did not work either as it just rebooted to download and I had to use Odin to load the Kernel again and it just rebooted to the same un-reset OS I was in.
Brad
Bshade said:
So I originally had issues with my S4 when it updated to 5.0 I got a new one from the inusrance company and i wanted to root and rom it right away. Well it took me a wile to root it, I had to find the right (or what I thought was the right) Kernel's to use. I rooted it finally with Towelroot, I then tried to install TWRP and reboot to recovery and load a Rom, however my phone will never reboot to recovery now. It will only reboot to download. TWRP does not seem to work and if I mess it with it it will reboot to download and it won't do anything ells until I use Odin to reinstall the Kernel. If I try the button combo to reboot to recovery it still reboots to download. So I think that keeps me from using SafeStrap as well.
I am at a loss, I just want to get the Hyperdrive+RLS21+KK+S4 Rom on my phone so I don't get the stupid 5.0 that ruins my phone. Is there anyone who can help me out with this? Also I did try to do a factory data reset and that did not work either as it just rebooted to download and I had to use Odin to load the Kernel again and it just rebooted to the same un-reset OS I was in.
Brad
Click to expand...
Click to collapse
You do know that OC1 is still locked down(5.0.1)?
No root, no downgrade, no ROMs, no safestrap. No TWRP unless you happen to have MDK(4.2 Jellybean)
You will have to flash a stock 5.0.1 ROM and life with it.
I had an S4 that did upgrade to OC1 I got a new S4 with my insurance that was not upgraded to OC1 it was still 4.4.2 NK1. I loaded the Kernel NC5 and used Towelroot then back to NK1 but I cant get TWRP to work and boot to recovery to flash the ROM it only boots to Download. I really want to ROM it so that it does not go back to OC1 as when it was OC1 on my old phone that I don't have it was useless, I could not make phone calls or install anything on the phone or it would just lock up and restart constantly.
I can not figure out why it won't boot to recovery, and why if I try to do a factory reset i have to reload the Kernel to make the phone work again.
Thanks,
Brad
THIS IS A TEST PROCESS!!
I just posted a set of service files to try and downgrade...I pretty sure it might work! [emoji14]
http://forum.xda-developers.com/galaxy-s4-verizon/help/testing-revert-to-nk1-t3124096
It Worked! now I just have to figure out how to re root I tried once with Towelroot and it did no work then tried to load the Kernel that Towelroot worked with and it got all bugy so i reloaded your Kernel and it was still bugy so I did the whole process over again and it worked a second time. LOL
Thanks so much,
Brad
Bshade said:
It Worked! now I just have to figure out how to re root I tried once with Towelroot and it did no work then tried to load the Kernel that Towelroot worked with and it got all bugy so i reloaded your Kernel and it was still bugy so I did the whole process over again and it worked a second time. LOL
Thanks so much,
Brad
Click to expand...
Click to collapse
TWRP will not work on anything above 4.2.2(MDK). You have to use Safestrap.
Do a FULL wipe to nc5, not the workaround. THEN towelroot, install Busybox(IMPORTANT) and Safestrap(modded version of TWRP SPECIFICALLY for devices with locked Bootloader), install Hyperdrive or ROM of choice.
Well I got all the way through, I got the Safestrap to work and boot to recovery. I did a wipe factory reset and wipe cache and Dalvik. I then try to install rom, now it says to install in a working and setup rom slot? I think that is where I have and issue. If I just try the instal it does not work as I get the error "no MD5 file found" and then "error flashing zip" Do you think this is due to the wrong Rom Slot or am I missing something that I am not doing?
Thanks so much for your help so far, I am so close and at the very last step in this whole ordeal, or at least I hope.
Brad
Bshade said:
Well I got all the way through, I got the Safestrap to work and boot to recovery. I did a wipe factory reset and wipe cache and Dalvik. I then try to install rom, now it says to install in a working and setup rom slot? I think that is where I have and issue. If I just try the instal it does not work as I get the error "no MD5 file found" and then "error flashing zip" Do you think this is due to the wrong Rom Slot or am I missing something that I am not doing?
Thanks so much for your help so far, I am so close and at the very last step in this whole ordeal, or at least I hope.
Brad
Click to expand...
Click to collapse
hmmmmmmm
Did you put the ROM on the SD card. Make sure to use the STOCK ROM SLOT!!!
Yeah, both of those things. On the SD card as a zip file and the stock ROM slot. I did try last night to flash another ROM quick to see if it would work and I got the same error so I don't think its my ROM but something I am doing wrong on the phone.
Thanks for your all your help so far,
Brad
Finally got it, took some time and lots of rework. I soft bricked it so many times I cant count them. I got this down though now, I am just playing with the rom to see what setup I like now.
Thanks so much again for your help.
Brad
Bshade said:
Finally got it, took some time and lots of rework. I soft bricked it so many times I cant count them. I got this down though now, I am just playing with the rom to see what setup I like now.
Thanks so much again for your help.
Brad
Click to expand...
Click to collapse
I think we have all been there at some point. Good job getting it all going. Takes some patience and effort. Don't forget to have some fun!
Sent from my SCH-I545 using XDA Free mobile app