Hi,
I have my Galaxy S III for a few months now, and after I rooted it this problem came up:
Everytime I try to connect my phone to my computer via USB it enters a sort of bootloop until I disconnect it.
Any idea of what could I do?
Thanks.
Samsung USB drivers installed ??
No information posted regards firmware etc crystal ball failed .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts
Related
Hey!
I recently Rooted my Galaxy SII, I'm running 2.3.4 but recently my device wont connect Via USB to my Window's 7 Laptop, I get the Connected sound effect on the Laptop and it Disconnects 2 seconds afterwards, I don't have enough time to install drivers or anything like that before the phone actually Disconnects again, Anyone have the same problem or can help? Its really Pissing me off
As always first is to clean the usb port .
Second is to use Samsung cable .
Third is to only connect to a motherboard port .
Fourth make sure that Kies or the usb drivers are installed first try a rinstall .
jje
JJEgan said:
As always first is to clean the usb port .
Second is to use Samsung cable .
Third is to only connect to a motherboard port .
Fourth make sure that Kies or the usb drivers are installed first try a rinstall .
jje
Click to expand...
Click to collapse
Still no joy, Uninstalled and Installed Kies also with the same outcome.
Sweegy said:
Still no joy, Uninstalled and Installed Kies also with the same outcome.
Click to expand...
Click to collapse
Which ROM are u using? Did you check the thread if there are known issues? Does your phone indicate a USB connection?
Hi guys i recently bought a galaxy s3 and i'm trying to connect it with my PC to transfer songs apk's movies and etc. The thing is tha when i first tried to connect it i got a message that a file is missing with the name "wsadb.sys" after a little search i learn that it needs kies for the connection so i install the program and after i tried again i got another message a different one this time :
"Cannot Install this Hardware.
There was a problem installing this hardware: MTP Device
An error occurred during the installation of the device.
The filename, directory name, or volume label syntax is incorrect."
can someone help me with that please???
Try the Samsung USB drivers first
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
JJEgan said:
Try the Samsung USB drivers first
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Click to expand...
Click to collapse
nothing i got the same message
"Cannot Install this Hardware.
There was a problem installing this hardware: MTP Device
An error occurred during the installation of the device.
The filename, directory name, or volume label syntax is incorrect."
isn't there any one else who had the same problem?
Haven't had this problem myself.
But what you can try is going to device manager and there searching for you phone and removing the drivers.
Then install the samsung USB drivers or KIES. And after that connecting your phone.
You can also try another USB port. And try to switch between USB2 and 3 ports. Sometimes the USB3 drivers installed can make a fuss with the connection.
I hope this helps
Kies give away, only drivers
Then start the download or cwm and connect to pc.
Pc installs/driwers,mtp/ itself in this mode
MuerteDiablo said:
Haven't had this problem myself.
But what you can try is going to device manager and there searching for you phone and removing the drivers.
Then install the samsung USB drivers or KIES. And after that connecting your phone.
You can also try another USB port. And try to switch between USB2 and 3 ports. Sometimes the USB3 drivers installed can make a fuss with the connection.
I hope this helps
Click to expand...
Click to collapse
i have tried with only the usb drivers then only with the kies and then with both installed but still getting the same message, i tried all my usb ports but it keeps asking me to install the software automatically or with specific location i choose the automatically and then i get the same message i don't understand why is that happens only to me this is getting boring
misacek said:
Kies give away, only drivers
Then start the download or cwm and connect to pc.
Pc installs/driwers,mtp/ itself in this mode
Click to expand...
Click to collapse
micasek can you explain me please? i didn't understand very well what you meant
Me too did not work, the connection, USB to PC
Uninstal,, kies, only the driver, switched on, tuned to the USB, the phone and the is put into
mode or download recowery, then PC will pull what is needed.
Sorry for the language?
---------- Post added at 06:42 PM ---------- Previous post was at 06:34 PM ----------
here driwers
https://app.box.com/s/btykxuvk6viq6dz4lf18
This is just a repeat of usual answers posted to this question
use Samsung USB cable
clean your usb ports
use mainboard usb port
delete all drivers from the usb port totally remove Kies and re install
Backup data and factory reset phone .
Use another PC .
Take to a service centre .
Hi every one
i used to plug in my galaxy s3 into my pc with my usb cable and connect easly but now my pc doesn't recognise my phone it says the devcice can't start (code 10)
thanks
thenightwisher123 said:
Hi every one
i used to plug in my galaxy s3 into my pc with my usb cable and connect easly but now my pc doesn't recognise my phone it says the devcice can't start (code 10)
thanks
Click to expand...
Click to collapse
Your question has been posted multiple times . Forum rules require you to search before posting .
Google <<< I9300 your search terms > xda
Windows codes search .
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
hallo guys, i really need your help on this:
my sgs3 stopped working after running the official update (4.3)
its starts off well with the initial logo but doesnt start up beyond that.
Now my main problem is that the usb hub is broken so i have no other
means to connect the phone to the pc and sort it out through kies
or ordin.
im able to dismantle the phone completely so my question would be
are there places in the phone that i can connect the usb wires (naked wires) after
opening up the phone so that i can bypass the hub issue and have it connected to the pc?
im aware there are four important wires in the usb plug
another thing, i've tried installing firmwares from the sd card but they all
got rejected by the phone for signature reasons.
kindly help, thank you
Factory reset in recovery first, without a usb connection you can't do much.
Sent from my GT-I9300 using Tapatalk
I have a samsung galaxy s3 with stock firmware. I've hade a few custom roms before but put it back to stock for some reasons. But now odin does't recognize my phone. Drivers are up to date, the usb cable is the same, other phones are detected (s2 and s5). i have tried other cables including from other s3's from the box. I tried to root it from sd but still no luck, so i can't put custom rom from sd. Is there any way to put a rom from sd without rooting? it can be stock, it doesn't matter(i'm stuck with stock recovery). Also I consider myself a noob, so any explanation would be appreciated. Thank you
No, there isn't. Try another pc or resolve the usb conflict on the pc.
boomboomer said:
No, there isn't. Try another pc or resolve the usb conflict on the pc.
Click to expand...
Click to collapse
The same thing on other PC's.
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
boomboomer said:
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
Click to expand...
Click to collapse
It charges only...doesn`t connect in any way. Seems like i have to visit a service?
Same here!
Having exactly the same issue here! When connected by usb cable to the computer, theres no USB connection on the status bar. Just the ray symbol on battery to demonstrate the USB is connected.
I need to change my ROM, but even Odin didn´t recognise my phone.
Some clue?
Thanks!
Ps: sorry for my poor English....
Same Problem
I have the same problema, after the installation of the custom Rom, in about 1 week, the PC no regcognize my Galaxy S3. I have test it in another computer with another usb cable. I need help, i need to put a stock rom without odin, i have clockwormod installed.