Hi Everyone,
So I recently made the switch from 4.2.2 to 4.3 today morning. I went from dvhexer's CM10.1 to CM10.2 and found that everything is nice and smooth and fast - installed without problems etc.
Then I made my first call to check my voice-mail and I got no sound from the earpiece on the phone. Being the clever fella I am, I turned on the speaker and I could hear that the call was in progress. I next tried headphones and that worked too. So I googled the issue to see and I saw a couple people who had similar issues.
I flashed several modems/radios (including some hybrid morrislee variety), flashed several kernels but ultimately couldn't get the sound to work. I also tried bruthaedhung's PACman Rom (4.3) and it had the same issue. Does anyone here have a fix for this issue? I'm in a health related professional grad schools so privacy in calls is kinda important and I can't always have speaker phone calls!
Thanks for your help!
EDIT:
My LGOG has not been converted to an N4 (Ever) it is currently running CM10.1 without any issue (no hardware failure). The only thing that may be different here is that I am on T-Mobile instead of AT&T (unlocked AT&T model). The problem is only showing up on the custom built 4.3 roms.
Related
My son is using my old vibrant and still has 2 months before he can upgrade, or I'd just replace it.
I've tried a couple toggles that used to work on early GB roms, but they crash on AOKP JB M1. I'd prefer not to have to flash the ROM/a new ROM, as I don't like trouble shooting phones I hardly get to use, and he can't report errors accurately at all.
Any experience with this issue?
-Accidental Asshole aka Jeremy
Re-flashed ROM, still no go. I'm now thinking it's a hardware problem.
-Accidental Asshole aka Jeremy
I Have SGS2 I9100 and have problems with Bluetooth working when I'm calling. Bluetooth works when I listen music and i can hear touch tones when pressing number before dialing but once i dial the Bluetooth is silent no voice on nothing. I can call and hear people when i call them without Bluetooth.
I have installed following ROMS with same result in the end: Carbon, AOSP Neat, Resurrection remix and Slim kitkat.
I have no idea where the problem lies it seam like every 4.2+ rom has same issue. i have checked my system folder and rw--r--r is there.
Any help would be greatly appreciated.
I am also having the same issue. When connecting to my car, bluetooth music works , just the phone doesn't. As a phone call is initiated you can hear sound for a split second then it cuts out. I am currently on the latest Resurrection Remix. I have searched the development forum and see that others have the same problem, but just like this thread, nobody seems to have a solution for it.
Any help would be great
Thanks for your help
Sent from my ASUS Transformer Pad TF700T using Tapatalk
Same exact issue. I tried Cyanogenmod, Omnirom, and a couple different versions of each (stable, M build, nightly), and nothing worked. I did a full wipe each time, and that still didn't help. I even tried apps like Mono Bluetooth Router to no avail. I finally went back to stock JB 4.1 since bluetooth is a must for me.
In case it matters, my phone is branded as a I9100M for Bell Canada. It's supposed to be the exact same hardware as the I9100, but could it possibly be slightly different? I see cliff03 is in Canada as well. I can't tell for sure, but it seems like the problem affects some users but not others. Maybe that's why?
SenorChang said:
Same exact issue. I tried Cyanogenmod, Omnirom, and a couple different versions of each (stable, M build, nightly), and nothing worked. I did a full wipe each time, and that still didn't help. I even tried apps like Mono Bluetooth Router to no avail. I finally went back to stock JB 4.1 since bluetooth is a must for me.
In case it matters, my phone is branded as a I9100M for Bell Canada. It's supposed to be the exact same hardware as the I9100, but could it possibly be slightly different? I see cliff03 is in Canada as well. I can't tell for sure, but it seems like the problem affects some users but not others. Maybe that's why?
Click to expand...
Click to collapse
Okay, I think I figured it out. While I was testing I flashed a stock I9100 (not I9100M) ROM, and since then my bluetooth is now working on all custom KK roms. This is the I9100 ROM I flashed (I9100XWMS2):
http://www.sammobile.com/firmwares/3/?download=24707
Hey.
I've got an issue that comes & goes with my SGSIII.
I use UltimaROM v16 and Boeffla 5.1 Kernel, and have tried reflashing with no luck.
I experience the distorted voice on calls periodically. Some calls just work perfectly, some just doesn't.
When it does occur, it's almost distorted to the point, where I can't hear what people say. The problem is consistent with or without headset.
Occassionally I start out a conversation with the distortion being really bad (the problem is only on my end). Then, after a few minutes of conversation, it disappears, and the quality is perfectly fine again.
Really strange.
I work as a journalist, which means frequent phone interviewing. Thus, I really depend on being able to hear what people say over the phone when working.
After searching for some answers on the board, I found some users recommending flashing a new modem/RIL.
Problem is: I don't know the first thing about which modem/RIL is right for my phone.
I ran GetRIL and it said "Baseband: I9300XXUGMK6" and "Unknown RIL"
So.. is this still a modem/RIL-thing?
If so, which one should I use, and which modems & RILs fit together?
Please help a new Samsung flash-o-holic out!
Thanks,
Thorm
I'm gonna do a cwm backup & flash a new ROM tonight, just for trial & error.
The ROM: XROM V1.0.3
Thorm said:
Hey.
I've got an issue that comes & goes with my SGSIII.
I use UltimaROM v16 and Boeffla 5.1 Kernel, and have tried reflashing with no luck.
I experience the distorted voice on calls periodically. Some calls just work perfectly, some just doesn't.
When it does occur, it's almost distorted to the point, where I can't hear what people say. The problem is consistent with or without headset.
Occassionally I start out a conversation with the distortion being really bad (the problem is only on my end). Then, after a few minutes of conversation, it disappears, and the quality is perfectly fine again.
Really strange.
I work as a journalist, which means frequent phone interviewing. Thus, I really depend on being able to hear what people say over the phone when working.
After searching for some answers on the board, I found some users recommending flashing a new modem/RIL.
Problem is: I don't know the first thing about which modem/RIL is right for my phone.
I ran GetRIL and it said "Baseband: I9300XXUGMK6" and "Unknown RIL"
So.. is this still a modem/RIL-thing?
If so, which one should I use, and which modems & RILs fit together?
Please help a new Samsung flash-o-holic out!
Thanks,
Thorm
I'm gonna do a cwm backup & flash a new ROM tonight, just for trial & error.
The ROM: XROM V1.0.3
Click to expand...
Click to collapse
Try to use your phone some days with GSM network and see if the issue persist. I faced this issue earlier.
Also try to change your Kernel and see if the issue persist.
Lastly if this not solved. Visit sammobile, check the appropriate firmware and flash the original firmware. Avoid using custom ROM as you are heavily depended on the phone.
Hi guys,
Got a strange issue since a month.
When I get called the caller sounds very disorted and there is a lot of noise going on. It's barely understandable.
Same happens when I call someone.
The problem doesn't always occour but it's way too often to simply ignore it.
When I hang up and call back directly afterwards everything is fine.
I'm running Endrohix on my SGS3 atm.
This also happened to me with Archidroid and other ASOP roms. Haven't tried Stock Roms since I don't like them and there has to be another solution than going back to stock.
Greetings from Austria!
Change your kernel and check.
So i tried a lots of roms now. All sammy roms seem fine, as soon as it gets to AOSP (Omi, CM, Archidroid) the problem occurs. Tried a few kernel now, all seem to have the problem. Mainly tested Boffela and agni kernels and both have the same strange issue
nobody an idea?
Hardware
Seems like it's a hardware problem. Why don't you just go to a repair shop with that?
*#0*# test sound is OK??
How can it be a hardware problem if its working fine with sammy roms?
*#0*# gives me MMI-Error.
Had a chance to test on a few other cars today and found out something interesting!
Accepting a call by using the phone gives me a 50% chance to work, accepting it by the car radio always causes the sound bug
@verny94 ill test the setup in your signature and see if it works.. EDIT: just saw your's is sammy based, i'm pretty sure it will work
fold93 said:
How can it be a hardware problem if its working fine with sammy roms?
*#0*# gives me MMI-Error.
Had a chance to test on a few other cars today and found out something interesting!
Accepting a call by using the phone gives me a 50% chance to work, accepting it by the car radio always causes the sound bug
@verny94 ill test the setup in your signature and see if it works.. EDIT: just saw your's is sammy based, i'm pretty sure it will work
Click to expand...
Click to collapse
*#0*# is service menu. It must works but only on Sammy ROM.
I am really proud that my signature help you
Alright so I'm running Omega now and the sound problem is gone. But still i miss the speed of my Archidroid
BTW! I completly forgot to mention.. the strange noises only occour when i'm trying to talk over Bluetooth so if I make calls without bluetooth connection they work fine but if there is a hands-free or a car-radio involved the problems start
fold93 said:
Alright so I'm running Omega now and the sound problem is gone. But still i miss the speed of my Archidroid
BTW! I completly forgot to mention.. the strange noises only occour when i'm trying to talk over Bluetooth so if I make calls without bluetooth connection they work fine but if there is a hands-free or a car-radio involved the problems start
Click to expand...
Click to collapse
LMAO you mentioned the important part in the end
AOSP/CM based roms have had some bluetooth issues. Either not clear or breaks intermittently.
You can try Sammy or Sammy-based roms for better compatibility.
I've had this issue for a long time. It still occurs with the latest CM11. Here are more details:
https://jira.cyanogenmod.org/browse/CYAN-2884
Could you guys point me specific, tested Sammy ROM where that BT issue does not occur?
I have searched quite a bit for an answer/fix for the speakerphone echo that occurs only with CM based roms. I haven't seen anything regarding this in any of the CM ROM theads. What's happening is, when Im on the phone with someone and I switch to speakerphone the person I'm talking to complains about their voice echoing back to them.
Is anyone else experiencing this?
me too
Im in insert coin rom , im start face this issue , i do think its mic issue
I've noticed it on the ViperDNA rom as well as NuSense and NuSense 6 roms. I see it on Skype and Hangouts. It probably has something to do with the kernels that are used for the 4.2+ roms. The last time I recollect I had these apps working fine was when I was on a stock VZW rom back in December '13.
Bump
Update your firmware. Speaker works fine on NuSenseSIX.
Bump