Related
So, I've just gotten a Nook Colour, with CyanogenMod7. I've also got a Mytouch 4G Slide. I use Moon+ Reader on my phone, and would like to set things up so that I can use the same program on my Nook.
However, I'd also like to set things up so that when I finish reading on my Nook and go out with my phone, I don't have to find my place in the book again.
So basically I'm looking to synchronize data specific to particular apps between my Nook and my phone. Anyone have any suggestions?
I have a few ebooks on my laptop and I am having issues moving them to my nook tablet. It has been rooted and I am using ADW launcher. Please help!
rbellis said:
I have a few ebooks on my laptop and I am having issues moving them to my nook tablet. It has been rooted and I am using ADW launcher. Please help!
Click to expand...
Click to collapse
What format are your books? How are you trying to move them? via usb? dropbox?
Do you have an SD card installed? Without one, only 1GB is seen on your internal memory if you connect your noob to your pc with the usb cord (but then you can move it to anywhere else).
Install a file explorer program (file expert is a good free one, root explorer is too but it has the possibility of having you misclick and mess up permissions on system folders).
Books/anything else moved to your NT's internal memory via usb -> shows up in /media. Books that you want your nook's native book applications to see -> move them to /data/books. Books that you have on your sdcard -> will not be seen by your nook's ebook reader program but you can make any folder anywhere and put books in it.
I recommend using an sdcard and downloading a program called Coolreader (android market); it's the best ebook reader I've found on this platform. It has a ton of settings and lets you configure it entirely (font, spacing, layout, behavior, etc etc). It reads from .zip archives and supports quite a few formats. It won't see anything with DRM protection on it that hasn't been removed, nor will it see .lit or amazon's proprietary formats. Anything with DRM on it that you bought from a certain market (Kindle, Adobe DRM ebook stores, etc) will only be read in associated programs (until you remove the drm) :/ Calibre is a great program (on the pc-side) to convert between book formats and manage your library, as a side note (not related to drm removal).
if I kept them on on my SD card how would I get them to show up using the stock ebook reader? Also....what format can I use? I have them in .mobi and .opf
Since I am rooted I can access the other 15GB ... I tried using es filer explorer (enabling root) and trying to move them to the books folder but I still cant get them to show up using the google books...kindle app and the stock app on the tablet
rbellis said:
if I kept them on on my SD card how would I get them to show up using the stock ebook reader? Also....what format can I use? I have them in .mobi and .opf
.Since I am rooted I can access the other 15GB ... I tried using es filer explorer (enabling root) and trying to move them to the books folder but I still cant get them to show up using the google books...kindle app and the stock app on the tablet
Click to expand...
Click to collapse
For books on your SD card go to your Library application -> my files -> press memory card, and your books should be there (at least the ones in a format it sees/reads).
Stuff in /data/books will show up automatically on your shelves, I think. Stuff in /media books will need to be imported the same way as above: library -> my files -> books (just not clicking on memory card button).
The Nook's eReader will see: EPUB, PDF, DOC, TXT, DOCM, DOCX. Epub is a great thing to convert all your books to as it's widely supported and is the public domain standard (by the way). Other reader apps will see more formats. I think .opf is epub though no? Or rather it's .epub with extra metadata, so that should be seen right off the bat. If not, do try Calibre out. One click conversions to any formats, and previews of how it looks on that format.
I am so sorry to keep asking about this...I have tried putting them in the data/books but nothing showed up in my library. I don't know what I am doing wrong. Sorry if I keep asking stupid questions...just really want this to show up on my "shelf"
Try this:
Open library -> my stuff (upper right) -> find book (sd card) -> select book/long press book -> select add to shelf from pop out menu. It will ask you to make a shelf; you can edit and add shelves via the menu that pops up (create new shelf/add to favorites).
Does that work?
Putting them in /data/books adds it to the reader+reader's directory. I could have sworn there was a way to mass-autoadd things to the shelves (checking now).
edit: Ok, I can't get it to work except through actually adding it with the Library app Rebooting the device puts the books from my files -> add to shelves in the "book" tab however, but they do not automatically appear there if you close/restart the library app without rebooting the nook. Odd behavior. If you have a lot of books the library seemed very finger intensive.
I can't figure out how to mass-move anything inside the Library app either, and I'm not sure whether it has this capability either. Yeah, I quickly moved away to using a file explorer app + another reader, as you can see
Hi ...
Nook is unable to see/read .mobi and .opf. You must convert them to epub, using a free program called Calibre.
Or they are locked by the use of a DRM... again Calibre can help you.
Try to find an ebook is an "epub," reread slowly, Zmobie's excellent posts, then try again...
ok....so I can get them to show in "my shelf" if and only if keep it on my SD card. My goal is to keep my books on my nt and music movies and pics on my SD card because it is only an 8GB.
I have a John Grisham collection that I have in a folder labled "john grisham" Should I not put it in a folder and just put it in the data/books folder
Ok, there are a bunch of book directories on the internal memory: media/My Files/Books seems to be the only one that automatically shows up in the Library books section but ONLY if you reboot. Copy/move the books you want on the internal memory there, to have them show up in Library.
If you (or when I did anyway) add a book through the Library application it will add it to the shelves, if you pull it from an sd card, or the 1gb media/My Files/Books storage folder. I went and pasted a bunch of books to test this and the Library app only sees things that is labeled as user storage (which I guess makes sense).
The way to mass-add books to the Library, without one by one dragging and adding through the Library app itself, is to move the files you want to automatically load up in Library (under the "books tab" - won't be added to a shelf automatically) is to copy all of them into media/My Files/Books, and restart the nook. The restart is needed as there doesn't seem to be a way to force it to scan for new books without a restart :/.
So:
It should *definitely* see all your books if you move them to media/my files/books, under the "books" tab, NOT under "my stuff" tab, if you copy and reboot the nook. You can then add them to shelves from the main "books" tab (which is what Library starts up in).
I don't know whether it scans inside folders - it *should* so you should try moving your John Grisham folder to media/My Files/books and see.
(I wonder what the three other /books locations are for :/. I don't seem to force Library to automatically recognize stuff in them. The reader does recognize anything in those directories, but then it's just a folder listing anyway).
edit: Ok it works inside folders for me. Have fun!
Thank you so much! Now if can figure out how to make folders on my desktop I will be good to go.....thank you so much
Calibre also works great for the Mac
rbellis said:
Thank you so much! Now if can figure out how to make folders on my desktop I will be good to go.....thank you so much
Click to expand...
Click to collapse
On the Nook default launcher you can't, I think*? It's a reason I use another launcher (go/adw) and just create links to the Nook applications I use. You can make folders by default in either of the two above launchers.
*If anyone has managed this, do tell.
not to get off topic but when I try to add a folder...long press on the screen and select folder and nothing happens
rbellis said:
not to get off topic but when I try to add a folder...long press on the screen and select folder and nothing happens
Click to expand...
Click to collapse
In Go launcher? HMMM. *tries*
edit: Oh, that's funny. You're right! I never actually make folders that way, because I have a few folders I got from accidentally dragging an icon onto another icons. They get grouped into a folder automatically I assumed the normal way worked, but if not, try that.
It doesn't work in any of the launchers. It must be disabled on the nook entirely in that case. Weird!
I wasn't able to drop appear together with ads to make a folder so I switched to go launcher and I like it so much better. It it what I use on my roped droid x2. I don't know if it was my hacked downloaded version of adw that caused this but for some reason I could not put anything on the top 1 inch or so of the screen. But I have had no issues with GO.
Sorry to keep asking newborn queriins. This is my first tablet. I have noticed that even though it is rooted and has an android os on it, there are still a lot of things that canny be done. I have not been able to download a facebook apk I have also had issues with the xda app. When I log in the app force closes. Not a big deal...I have then been going to the website. With that in mind....is there a way to put web page short cuts on the droidtop......
Again...sorry for the newborn questions and thank you again for your help
rbellis said:
I have noticed that even though it is rooted and has an android os on it, there are still a lot of things that canny be done.
Click to expand...
Click to collapse
Yep, there are a lot of things disabled on the NT and won't work until apps get updated or mods are released for the tablet. It's a new (and restricted) device, so this is normal really; various things won't work off the bat. I think there is a Facebook app thread in these forums (or the dev forum) that gets that app to work somehow. I don't use it so I don't know specifics.
I heard that ADW launchers recent update changed/broke some things, so that might be why it isn't working perfectly. I use go launcher myself and ADW only for emergencies currently, yeah. Anyway, no worries on asking newbie questions - means the device is getting more users and exposure! Have fun with it.
Looking for input on the best way to set up file folders to be utilized on both WebOS and Android partitions. I tend to go into probably Way too much detail, skip to the bottom for the tl:dr.
I first noticed that the TouchPad doesn't handle folders very well when I tried organizing many files for school. I had each class in a different folder hierarchy based on course. But when I go to access them, they show up as a huge long list of .pdfs instead of my nice organized fashion. Similar thing happened with my music. I shrugged my shoulders cause my file naming convention was good enough that I had no issues.
Then I installed CM7 Alpha 3.0 (recently flashed 3.5, same situation). Got the Android partition all setup the way I wanted, and further organized my folder structure to match. Rocked Android for a few weeks, and got nostalgic, so I booted back to WebOS. I immediately noticed that my TouchPad claimed I had no music, while not a lot, there's around 5gigs floating on it. Told myself I would look into it, spaced it off. That was until I noticed I couldn't access any recently downloaded and organized .pdfs that were done on the Android boot. What gives?
I've always found it frustrating that the native file selection system in WebOS doesn't give you file path options, but it is what it is. I know there is a file system browser on Preware, honestly I think it's cumbersome, but may have to rely on that I suppose. I have major OCD as far as how folders are organized, and really don't want to just dump everything on the root. But again, if I have to, I shall.
TL: DR Ultimately I'm trying to get info on how the WebOS partition sees files, and how the folder heirarchy works. I have files in some folders that are recognized, and some that are not. Is it naming convention, or just location? My file issues are primarily .pdfs and music files, but concerned with any productivity file extensions for the sake of school (primary use of device.)
16Gb TouchPad WebOS 3.0.4, F4 Phantom kernel, great number of patches, Dual boot CM7 3.50
Did you (or anyone else) ever find any information on this issue? I find it frustrating having to go through Internalz Pro and go through each folder to do anything. My music will not show up through the stock player (which would be great on webOS because the android sound goes bad when the screen is off).
I have not. Haven't played with my TouchPad much recently, mainly cause every ROM I flash wifi breaks.. lol.
If I ever do get a solid solution, I will try to post up.
im betting this a indexer issue if want try to force it to index, look for "Media Indexer Refresh" in preware, that should find any stray media supported by webos
Yeah, it's definitely an indexer issue. A lot of people used to say to connect it via USB and then do a hard unmount (where it says "ouch...") and let the indexer run but that doesn't work.
Thank you for that suggestion though, it is exactly what I needed. I always thought there should be some command or some patch that would force it to re-index but never found it. I ran it one time and my pics and music show up. Awesome!!
A year I put cm7 on my NC, I really use it. I have spreadsheets on it for everything, including “what’s in my freezer”. The one ONLY thing that I have missed is the B&N Reader. I have all the other reader apps and none of them compare to the original. Loaded B&N app--can't get it to work on cm7.
Now I have my NT in a awkward stage. I have not been able to get the drivers changed so I can root it. (I have had a lot of help from this forum; and am ready to try 2 more methods that look hopeful) BUT, I have sideloaded all the apps that I use in my NC, can get around the home button nicely with ADB and with AppSwipe (terrible name for my favorite app!) I have the ability to pop back and forth from Dropbox to pick out a book choose reader (B&N). I haven’t touched the home button in a week since I loaded AppSwipe.
Finally, here’s the question: If I get the drivers changed, which I have a burning desire to do; will I lose the reader?
If you are just planning to root, then no, you'll still have the original reader there as well.
If you plan on using CM7 (when it's completed) then the reader will be gone.
If I recall correctly, after I rooted (indirect's method), I still had access to the entire B&N launcher and apps, including the stock reader. Homecatcher asks which launcher you want to launch, and if you choose the stock launcher, it works very much like out-of-the-box.
Unfortunately, I was reading a thread last night, indicating that the reader was not being restored from backup properly on the CM7 release.
Hope I helped!
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Nook app on Market
I've been on the CM7 alpha now for the past week with good success. I just went out to the Android Market and downloaded the Nook application. It is working fine for me. I've been reading on it all week.
It is good to know that the B&N reader works in CM7 on the Nook Tablet. I was wondering that myself. I knew from experience that the B&N reader from the market doesn't work on 1.4.0 rooted.
I can echo that rooting the Nook itself will not remove the reader (as long as you don't choose to "de-bloat"). Note, there are SD methods for rooting so you may not need to resolve your driver issue. So, regardless of your route (root, CM7) sounds like you are golden for reading your Nook books.
My thoughts are around an issue that is a bit more subtle: At the moment, I'm considering running CM7 on SD for a multi-boot experience. If I want a full tablet, I would boot to CM7 on SD. If I want a stock (or meta-stock) experience I would boot to the internal firmware whether it be root or stock. My reason for this? Whenever I try reading ebooks from the library (specifically ePub) and try to view them using the B&N reader on my phone, it won't work - I can't seem to read licensed content that I borrow from the library because I can't seem to sideload it: Adobe's tool (and others that I've tried) don't recognize my phone as a Nook.
Now, my need for a multi-boot would evaporate if someone tells me that Adobe's tool (and others) recognize a Nook Tablet running CM7 as a proper Nook - my problems would all go away and I would happily run CM7 internally and avoid multi-boot altogether. Anyone with input on this?
Thats exciting. Tell me, are you reading a book that you bought from B&N?
I have been cutting up (gasp) my favorite books and scanning them into epub, I can't get B&N to read them on my cm7 NC?
Sent from my Nook Tablet
PlacidCat said:
It is good to know that the B&N reader works in CM7 on the Nook Tablet. I was wondering that myself. I knew from experience that the B&N reader from the market doesn't work on 1.4.0 rooted.
I can echo that rooting the Nook itself will not remove the reader (as long as you don't choose to "de-bloat"). Note, there are SD methods for rooting so you may not need to resolve your driver issue. So, regardless of your route (root, CM7) sounds like you are golden for reading your Nook books.
My thoughts are around an issue that is a bit more subtle: At the moment, I'm considering running CM7 on SD for a multi-boot experience. If I want a full tablet, I would boot to CM7 on SD. If I want a stock (or meta-stock) experience I would boot to the internal firmware whether it be root or stock. My reason for this? Whenever I try reading ebooks from the library (specifically ePub) and try to view them using the B&N reader on my phone, it won't work - I can't seem to read licensed content that I borrow from the library because I can't seem to sideload it: Adobe's tool (and others that I've tried) don't recognize my phone as a Nook.
Now, my need for a multi-boot would evaporate if someone tells me that Adobe's tool (and others) recognize a Nook Tablet running CM7 as a proper Nook - my problems would all go away and I would happily run CM7 internally and avoid multi-boot altogether. Anyone with input on this?
Click to expand...
Click to collapse
For library books, I use Overdrive Console app. It downloads into the Nook. It's great but they had no pg numbers. I ask why & they updated it but the pg numbers are only by the pgs in the chapter.
Sent from my Nook Tablet
The Nook app installs for me but I can't synchronize my account or make the 'shopping' or 'search' buttons work. However, I can read all of my .epub books on the sd card so I'm good.
The nook app from the Android store works. The reader app on the origjnal 1.4.0 nook firmware does not work.
Ok, I stand corrected. I uninstalled the previously Market version of the Nook app and reinstalled it and things work better now. The 'synchronize' and the 'shopping' buttons work now.
I was also successful in connecting to B&N severs, while downloading from Market and using B&N Nook app on the NT with CM7. The reader worked on stock with root but access to B&N account/server was wiped out for me. I tried some methods found on this forum but they didn't seem to work for me. I have heard that others have successfully succeeded in the attempt of connecting to the B&N severs on Stock while rooted. @Claudiaa you could try the root method and try different approaches to getting the B&N severs to recognized a rooted Tab, then you could use the un-rooter if unsuccessful. You could always start back at Stock software, I'm not sure if that is the case if you decide to go with ClockworkMod Recovery(void warranty, proof). If you do decide to use CWM Recovery their is Stock ROMs out there, that have root, certain hacks and apps preloaded. Info is always helpful, good luck on your decision.
So I've had my NT (16GB) since Christmas and have been rooted and OTA blocked since the beginning. Now that CM7 is available and relatively stable, CM9 is getting there I am soliciting some advice on how best to proceed. I have purchased several Children's Books from B&N and have, much to my chagrin, noticed that they are only viewable on the NT (probably NC too but I don't have one of those). I got the NT because I wanted a cheap good tablet, I also want to support B&N through purchases from them for content as much as possible, but let's face it I'm not buying the same apps multiple times. So what to do.....
Option 1. (Currently Evaluating) - I purchased a class 10 32gb SD card and put an ROM on there (CM7). I just completed this step last night and I am still playing about. There seems to be noticeable lag though in starting apps and browsing/playing around in general. This could be a early symptom of things just needing to settle out though as I haven't spent a whole lot of time on it yet. This would allow me to pop the SD card and boot stock when the kids want to view the books. A hassle but possible good alternative.
Option 2. Find some way to get the stock B&N reader programs on the custom ROM. I have no idea where to start with that and the brief searches that I've tried has suggested it isn't possible.
Option 3. Just live with Rooted Stock and the side loaded apps that I have now. This isn't as much fun, but does make for a fairly usable tablet with the full Nook capabilities. Just a few nits but none that are completely onerous. However no ICS and that might be a problem with apps in the near future.
Option 4. Bootable SD of a stock image. This would allow me to completely change the internal storage and have a separate bootable card for the stock needs. I haven't seen any of these offered in the Dev section yet but I'm willing to try to make one myself with a little more research. A couple of questions here though would be how/or if I can access the SD card from internal storage boot and share media on the card (movies, music, etc)? Can you default the boot internal with a special key press to boot from SD card? Ideas.
Option 5. Can you run a VM of the stock image from a normal boot? This one is way out there as I haven't seen VM options for Android yet.
So that's about all I can think of. Interested in hearing your thoughts and ideas. Thanks.
Your option 1 with CM 7 should allow you to load Google Play, which will allow you to download the Nook Reader app from there. It will allow you to read your books, and some other content as well, but not Nook apps. (You can't read some magazines except with native Nook, and although the apps you've gotten from B&N don't function here, you can download from Google Play most anything you want. Also, you can always boot back to stock Nook Tablet and do that. I flip back and forth between CM7 and native stock Nook Tablet all the time.)
I also boot back and forth between stock and CM7. I use both Nook & Kindle apps on CM7. I really only boot into stock when I'm in the Barnes & Noble store.