Shabbypenguin and the OUDHS
presents to you
OUDHS Touch CWM-based Recovery 1.0.3.6
for your Samsung Galaxy Mega 5.8 (GT-9152)
Read this whole post before doing anything
Enjoy
ODIN tar - OUDHS CWM-based Recovery 1.0.3.6
Odin 3.04
Directions:
1) Download the above files
2) Extract Odin3-3.04.zip and copy the tar that you downloaded into the folder
3) Run Odin as an administrator
4) Power your device off
5) Enter download mode
6a) Connect your phone to your computer
6b) Wait for drivers to finish installing if they need to be
7) You should see Odin find your device by marking a blue square in the ID COM box
8) Click on PDA and choose the recovery tar you downloaded
9) Disable auto-reboot
10) When it says finished you need to pull the battery out
11) You need to unplug it and enter recovery
12) Once you have booted into recovery it will handle the script that installs stock recovery if its present at /system/etc/install-recovery.sh
-------------------------------------------------------------------------------------------------------------------------------------------------
Congrats you now have CWM now if you wish to root youll need to follow these instructions
-------------------------------------------------------------------------------------------------------------------------------------------------
Superuser-1.0.1.1.zip
Directions:
1) Download the above file
2) Connect your phone and copy them to your phone
3) Once they are copied power down your device
4) Hold volume up and power to enter recovery
5) Navigate recovery by using the volume keys and power to select
6) Choose install zip from sdcard, then pick internal or external (where you copied it to)
7) Scroll down to the Superuser.zip and select it to install
-------------------------------------------------------------------------------------------------------------------------------------------------
Congrats you are rooted! this procedure will work on any firmware update you guys get
-------------------------------------------------------------------------------------------------------------------------------------------------
Source for crater
Credits:
Members of the Official Unloved Devices Hit Squad (OUDHS) for being the best we can for those whom need us
@oldmanhp for testing.
@tim_dnepr for testing and joining IRC
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just one question as rooting was avaliable earlier and most of cell are rooted.
Do we need to root again after installing OUDHS CMW Recovery? If its already rooted
Sent from my GT-I9152 using xda app-developers app
avismohite said:
Just one question as rooting was avaliable earlier and most of cell are rooted.
Do we need to root again after installing OUDHS CMW Recovery? If its already rooted
Sent from my GT-I9152 using xda app-developers app
Click to expand...
Click to collapse
nope, this is installing on the recovery partition has nothing to do with root. i merely offer the instructions on how to root so that should you guys get an update or a newcomer you already know how to root
I Went to sleep and recovery got fixed lol. Thanks Shabby
Sent from my GT-I9152 using Tapatalk 4
Huaaahahahaha finally thanks
Finally it work. Thank @shapbypenguin and @Rittik
First of all Thanks to everyone who have contributed ti make this recovery, ShabbyPenguin and the testers.
One question, installing this will activate the custom box? One which shows official or custom or any other message (like yellow triangle) will be shown on the device. .
Thanks
Sent from my GT-I9152 using Tapatalk 4
It works perfectly, thanks shabby.. Finally it works:laugh:
Now just wait for any custom rom hehe
oldmanhp said:
Finally it work. Thank @shapbypenguin and @Rittik
Click to expand...
Click to collapse
Thanks to you too bro :good:
Dear all mega 5.8 member, since shabbypenguin (thank you so much) had make CWM for our device, i think maybe we should ask XDA to give us a different thread instead of mix with mega 6.3 thread.... sorry for the poor English
Sent from my GT-I9100 using XDA
Sgilmans lets keep the discussion to Dev mode And once my CM tree is ready and we get one compiled rom, we can ask for a different forum. Anyway. Just offtopic. Can someone upload kernel sources from samsung for mega to github? I need to fork it..my net is screwed up rite now
Sent from my GT-I9152 using Tapatalk 4
shabbypenguin said:
Shabbypenguin and the OUDHS
presents to you
OUDHS Touch CWM-based Recovery 1.0.3.6
for your Samsung Galaxy Mega 5.8 (GT-9152)
Click to expand...
Click to collapse
Many thanks for this. I recall some exchanges in this forum when someone said their would "never" be a Recovery for the I9152. I told him never to say "never". You proved me right. Many thanks once again (I have clicked the "Thanks" button).
There is nothing called "never" in the android world. Just needs the correct knowledge
Sent from my GT-I9152 using Tapatalk 4
the recovery is in .ing format
the recovery is in .img format
n odin detects .tar ..md5 etc but not detecting .img
so now wat to do...
aakashdahake said:
the recovery is in .img format
n odin detects .tar ..md5 etc but not detecting .img
so now wat to do...
Click to expand...
Click to collapse
stop extracting the image file.
i submitted my device tree to have CWM made officially, dees_troy has made a test build of twrp and should have that done official in a few days. that means you can flash CWM via rom manager, twrp via goo manager. and enjoy all 3 kinds of recovery
shabbypenguin said:
stop extracting the image file.
i submitted my device tree to have CWM made officially, dees_troy has made a test build of twrp and should have that done official in a few days. that means you can flash CWM via rom manager, twrp via goo manager. and enjoy all 3 kinds of recovery
Click to expand...
Click to collapse
sorry my winrar shows its icon ,, so i thougt it would be .zip file
now i got its already .tar file,, sorry again for my mistake
need a favor from a mega 5.8 user to help dump some partitions, if you dont mind sending me a PM if you are willing to help that would be awesome
then i just gutta get some mega 6.3 users to dump the same files...
shabbypenguin said:
need a favor from a mega 5.8 user to help dump some partitions, if you dont mind sending me a PM if you are willing to help that would be awesome
then i just gutta get some mega 6.3 users to dump the same files...
Click to expand...
Click to collapse
Hi bro... how to dump file from device and which file do you need ?
Cheers
Sent from my GT-I9100 using XDA
I got some issue here. I deodex stock rom with kitchen, but when i try install the zip its failed. Status 0. Anything i can do to fix the problem.
Related
Hello Gentlemen,
Last time I managed to root my device Samsun galaxy S III (GT-I9300) via CF-Root 6.4 and it was successfully rooted,
This was the last time it has been rooted, afterwards, I upgraded and flashed a Jelly Bean 4.1.1 via Odin and found out that Root has GONE !!!
That's okay, but the most amazing problem is, the device does never get rooted no matter how many times I try to root it via the same method mentioned above (CF-Root 6.4),
I though afterwards that this is because CF-Root needs to be updated or something, so I reverted back to ICS 4.0.4 by flashing a stock md5 ROM over.
I tried the CF-Root 6.4 and found out it does not work anymore, please help me gentlemen as I spent the last night trial & error, never succeeded.
I am doing all of this just because I want to flash the HD 14 Android Revolution ROM made by Mike here:
http://forum.xda-developers.com/showthread.php?t=1797334
I hope there was an md5 or tar file (Odin flashable) so that it could be much easier to flash for people who are stuck with this situation.
can you post the exact file name you are trying to use to root
slaphead20 said:
can you post the exact file name you are trying to use to root
Click to expand...
Click to collapse
It is Chainfire CF-Root 6.4 (Latest one)
you many find it here
http://forum.xda-developers.com/showthread.php?t=1695238
Thank you
cfroot is Odin flashable... extract the .tar from the zip you downloaded.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
cfroot is Odin flashable... extract the .tar from the zip you downloaded.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I did extract it and end up with tar file, I flashed it, I know the procedure very well, the point is, the device is not welling to get rooted what so ever.
Engineering Support said:
I did extract it and end up with tar file, I flashed it, I know the procedure very well, the point is, the device is not welling to get rooted what so ever.
Click to expand...
Click to collapse
Can you see the su app? If not try installing it
similar problem
Hi, Im having a similar problem, I was rooted, upgraded to 4.1.1 through kies and it was rooted no more. I rooted it again and no problem. I tried a custom rom and it had an issue with wifi so I went back to stock. Now Ive loaded the stock back on and after wiping/factory reset and clear cache it still says Im running a custom binary, system status is custom also, so trying to root it again so I can reset the flash counter and load my backup but it keeps getting stuck on set up connection on odin and eventually fails.
Ive been at this all afternooon with out much luck, can anyone provide me with some guidance on this?
Hi
I have the same problem
slaphead20 said:
Can you see the su app? If not try installing it
Click to expand...
Click to collapse
I can't see anything like SU or CWM or anything else, besides, I use root checker and it tells me that I am not rooted yet.
Any idea why this is happening?
Also I noticed that upgrading to Jelly Bean changes the SDCard name to Sdcard0
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
I am happy to read this different answer. I will try your recommendations today,
and if it does succeed, I'm gonna fly to the moon
:good:
have you tried flashing a custom kernel which autoroots?
Sent from my GT-I9300 using Tapatalk 2
Must be having a brain dead day today! Totally forgot about the rebooting recovery to trigger installation....my bad! That will fix it
Finally
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
I finally got it to flash the .tar file in odin, in odin I unpluged the phone after hitting start ( it was just in SetUpConnection doing nothing ) and when I plugged in straight away it started doing its thing. However it didnt go through and load the SU etc. So I did it over again using the above method and it worked:good:. So thanks to you Mopral!!:laugh:
Engineering Support said:
I am happy to read this different answer. I will try your recommendations today,
and if it does succeed, I'm gonna fly to the moon
:good:
Click to expand...
Click to collapse
You Shiny Star,
You did it, you saved my days and nights
many thanks man
many thanks
Mopral said:
After flashing CF-Root with Odin, your phone should restart in custom recovery to install SuperSU and CWM app
If it's not, try that:
-Flash CF-Root with "auto-reboot" disabled in Odin
-once flash is done, unplug your phone from the computer
-restart in recovery with VolUp+Power+Home
It should trigger the apps installation process
Click to expand...
Click to collapse
You Shiny Star,
You did it, you saved my days and nights
many thanks man
many thanks
By following the above simple steps, I got what I want and resolved this puzzle which really pissed me off for 3 nights already,
Many thanks XDA
Does not work for me
My stats
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! Here I am with the new Android 4.3 Touchwiz rom. It's rooted, deodexed, knox free + does NOT flash the new bootloader (NO KNOX WARRANTY ON BOOTLOADER). It would not be possible to make it work without DerTeufel1980 kernel (Devil Kernel) - THANKS! Also THANKS to Chainfire for the SuperUser binaries + app! Since I am not a N7105 owner the development may be very slow.
I am a college student so any donation is very appreciated and will be very helpful (hahaha). Anyway, thanks everyone and enjoy the rom!
Code:
[SIZE="3"]*I am not responsible for bricked devices,
dead SD cards or anything else related with this.
*You are entirely responsible for what you're doing.
*I will, always when I can, update the thread with news and updates,
just be calm.
*Avoid discussion on the thread.
*Don't quote OP.
***You've been warned*** :)[/SIZE]
------------------------
INFO
>> Based on N7105XXUEMK5 4.3
>> 4.3 Modem included (well, I am not really sure what version it is)
>> Devil Kernel (Stock wifi not working)
>> Deodexed
>> Knox Free
>> Fully rooted
>> Free of new locked bootloader
> My rom is KNOX FREE, it means you WON'T get the locked bootloader + any of the knox apps. IF you still having the old bootlader (4.1.2) without knox on it, you will NOT get any "KNOW WARRANTY: 0x0" after flashing my rom; but if you already flashed the stock 4.3 via odin and got the new bootloader, the only thing I can say to you is: AVOID ROOTING YOUR DEVICE IN CASE YOU STILL HAVING WARRANTY, KNOX 0x1 WILL VOID YOUR WARRANTY FOREVER. -sorry for the caps-
> I do NOT have a N7105 to test the rom, I am making it just because I am sure there is people like my friend that doesn't want the new bootloader + a fully working, rooted, stock 4.3.
> READ ALL THE INSTRUCTIONS to install it properly.
> I am not a pro-developer, maybe I won't be able to help you but I will make sure to help you most I can.
> I make the rom flash the new 4.3 radio (modem). If you may face any problem related with mobile signal, just exchange the modem with the one you prefer.
> For now, it is needed to flash firstly the rom .zip with stock kernel and wait for it to boot and then flash Devil kernel and after Superuser update. As I said, I am not a pro developer and I am doing what I can to make sure I delivery a good and fully working rom to you all.
------------------------
CHANGELOG
Code:
[b][COLOR="Orange"]--V1.2--[/COLOR][/b]
- Revert V1.1 -.-
[b][COLOR="Orange"]--V1.1--[/COLOR][/b]
- Correction of SU binaries + app.
[b][COLOR="Orange"]--V1.0--[/COLOR][/b]
- First release
------------------------
BUGS
- You tell me
------------------------
HOW TO INSTALL
1- Normal process like any rom, FULL WIPE (system, data, cache and dalvik cache);
2- Flash Lion_Rom_N7105.zip (The install may take 2+ minutes);
3- Wait for the first boot (wi-fi probably won't be working);
4- Reboot recovery and flash Devil2-1.8.1-t0lte-DUAL-20131130.zip (I tested this version myself, other versions may not be working properly) and after flash UPDATE-SuperSU 1.80.zip;
5- Enjoy!
I highly recommend you to install xposed framework and try some of the modules to adapt the rom to your own way
IF YOUR USB IS NOT WORKING, FOLLOW THIS INSTRUCTIONS: http://forum.xda-developers.com/showpost.php?p=47604798&postcount=2645 (Thanks to baddesthad for posting and trickyhurl for sharing)
*If you're having any problems on recovery, just flash latest Philz recovery and go ahead.
------------------------
DOWNLOAD
Lion Rom V1.2 - READ INSTRUCTIONS!
UPDATE Super SU v1.80
LionROM N7105 4.3 Stock Kernel
Devil2 Kernel v1.8.1
LionROM N7105 4.3 Modem
------------------------
*Screenshot from beta test, show different modem and stock kernel*
Thanks! Waiting feedback
*reserved
Do we need to flash 4.3 modem separately?
Sent from N7105 Jedi X20, at the corner of this rounded earth.
antique_sonic said:
Do we need to flash 4.3 modem separately?
Sent from N7105 Jedi X20, at the corner of this rounded earth.
Click to expand...
Click to collapse
no, it's included, I've made a different .zip file just in case...
thanks for the rom,
just wanna confirm after read the op that can be revert to 4.1.2 after flash this?
and knox change to 0x1?
thanks
Any chance we could use air commands from note 3 on this rom?
no root support!
super su message:
there is no SU binary installed and superSU cannot install it.
I've run into some problems:
- SuperSU says that no SU-binary is installed and that i may need to re-root the system again
- I can't reboot into CWM because the Volume Up + Menu Button combination doesn't work now
- I can't reboot into CWM via Rom Manager as it needs root access to be able to do that
Solution: I had to flash CF-Auto-Root-t03g-t03gxx-gtn7100 via ODIN 3.0 (as PDA), after which i had to re-install SuperSU from the Play Store, start it up, and let it install the binaries (via CWM). I could then update CWM in Rom Manager (which was version 5.0 instead of 6.0 for some reason), reboot into recovery and finally flash the Devil kernel.
Hopefully this can be helpful to anyone who'd run into the same problems.
aguiamaster said:
Any chance we could use air commands from note 3 on this rom?
Click to expand...
Click to collapse
is the aircommand patch in skynote work ?
That one do not work, I did try to install as a total mess....and to help more I was on odex
Sent from my GT-N7105 using Tapatalk
RobbyRobbb said:
I've run into some problems:
- SuperSU says that no SU-binary is installed and that i may need to re-root the system again
- I can't reboot into CWM because the Volume Up + Menu Button combination doesn't work now
- I can't reboot into CWM via Rom Manager as it needs root access to be able to do that
Solution: I had to flash CF-Auto-Root-t03g-t03gxx-gtn7100 via ODIN 3.0 (as PDA), after which i had to re-install SuperSU from the Play Store, start it up, and let it install the binaries (via CWM). I could then update CWM in Rom Manager (which was version 5.0 instead of 6.0 for some reason), reboot into recovery and finally flash the Devil kernel.
Hopefully this can be helpful to anyone who'd run into the same problems.
Click to expand...
Click to collapse
tht works for me, flashing the CF-Auto-Root thru Odin
thanks!
I can takeany more.
Does this work on att phone?
Sent from the TermiNOTEr 2!
borijess said:
Does this work on att phone?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
+2
And can we flash from twrp or odin only? Would that wipe the recovery too?
Sent from my GT-N7105 using xda app-developers app
=====psycho-crusher===========>
actually its a zip. i think its twrp
I've just followed the instructions and have NO any issues in installation.
Able to go back to recovery and flash new kernel.
My wifi is working... will be testing it more and will report back in a few days time.
By the way, I have an international lte from hk.... oh and I was using Jedi X-17 (4.1.2) before this ROM.
Got the same error message when opening SuperSU and had to install CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip via Odin3 (PDA). After this, have to install SuperSU from GooglePlay. I also installed TriangleAway.
rookie_aus said:
I've just followed the instructions and have NO any issues in installation.
Able to go back to recovery and flash new kernel.
My wifi is working... will be testing it more and will report back in a few days time.
By the way, I have an international lte from hk.... oh and I was using Jedi X-17 (4.1.2) before this ROM.
Got the same error message when opening SuperSU and had to install CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip via Odin3 (PDA). After this, have to install SuperSU from GooglePlay. I also installed TriangleAway.
Click to expand...
Click to collapse
so you didnt already have 4.3 ?
Why can't we install Devil kernel from the begining, instead of flash the stock one first and then Devil?
Thanks
Yes that's right. I was waiting for 4.3 from Jedi but am a bit impatient and tried this one. So far so good. Running very fast.
Sent from my GT-N7105 using xda app-developers app
Sorry for the mess with SU, I included wrong one by mistake. It shoudn't be a problem at all as you can just go into cwm and flash UPDATE SuperUser 1.75 from Chainfire... REVERTING AND UPLOADING V1.1
Sent from my GT-I9505 using xda app-developers app
BEFORE WE BEGINDownload the following Rooting package, based on your device model number and save it to your desktop
Samsung Device Drivers
ODIN 3.07
CWM Recovery tar file
Rooting Package
HOW TO ROOT SAMSUNG GALAXY POCKET NEO
First of all, download and install the Samsung USB drivers on your PC
Next download the CWM recovery tar file from above, and save it to your desktop. Also download the Root Package zip file and save it to your desktop.
Connect your phone to PC via USB cable and transfer the Root Package zip file to the internal memory of your phone
Download the ODIN package and extract it to your desktop too
Disconnect the phone and power it off
Open the ODIN folder you extracted in Step 4 and run the Odin3 exe file as administrator
Now power on your phone while pressing the Volume Down + Home + Power buttons at the same time. This will boot your phone into Download Mode
Now plug in your phone to the PC. You should see an Added! message in the Odin window
image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device Added Odin
Click the PDA button in ODIN and load the CWM-recovery-s5310-ODIN.tar.md5 file from your desktop
Leave everything else in ODIN as it is. Check screenshot below for confirmation
image:
ODIN Setup
Double-check everything in ODIN and click the Start button to start flashing the CWM recovery image on to your device
Once the flashing is complete, you should see a Green PASS message at the top left in ODIN. It is now safe to disconnect your phone. CWM Recovery has been flashed on your device
Power off your phone.
Reboot to CWM Recovery. To do so press and hold the Volume Up + Home + Power buttons together. Release them when you see the CWM screen. In CWM mode, use the Volume Up/Down keys to scroll and the Power or Home key to select an option
Select Install zip from SD card, and on the next screen select Choose Zip from SD card
You should now see a bunch of folders and files. These are the contents of your internal SD card. Locate the Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip file you copied over earlier and select it with the Power button
image:
CWM Recovery Flashing Steps
On the next screen, select Yes to confirm the flash
Wait for CWM to flash the root package
Once done, Go Back to the main menu and select Reboot System Now
After your phone has booted up fully, open the App drawer and look for the SuperSU app.
Congratulations!! Your Galaxy Pocket Neo now has full root access as well as the custom CWM Recovery installed!
Enjoy your rooted device. Cheers!!
Can this method work on pocket neo s5310I running KitKat 4.4.2??
Sent from my GT-S5310I using XDA Free mobile app
---------- Post added at 02:34 AM ---------- Previous post was at 02:29 AM ----------
GT-5310I i meant to ask about.
Sent from my GT-S5310I using XDA Free mobile app
already rooted
skullhack said:
Can this method work on pocket neo s5310I running KitKat 4.4.2??
Sent from my GT-S5310I using XDA Free mobile app
---------- Post added at 02:34 AM ---------- Previous post was at 02:29 AM ----------
GT-5310I i meant to ask about.
Sent from my GT-S5310I using XDA Free mobile app
Click to expand...
Click to collapse
It Is already rooted if you are using CM11
It came with this rom as its stock. I am not sure what CW it's running. Can you please walk me through this CW11, perhaps to install it and see if it's rooted
Sent from my GT-S5310I using XDA Free mobile app
karthick mostwanted said:
It Is already rooted if you are using CM11
Click to expand...
Click to collapse
My phone also came with 4.4.2 stock (not cm11), so can I root it with the above files on a S5310I ?
I am not using CM11. I am not even sure that i can install roms' on this device. It i have installed droidVnc and it still requires root permissions. I beleive it's not yet rooted. That'si need guide to root this device. Plz help me
Sent from my GT-S5310I using XDA Free mobile app
skullhack said:
I am not using CM11. I am not even sure that i can install roms' on this device. It i have installed droidVnc and it still requires root permissions. I beleive it's not yet rooted. That'si need guide to root this device. Plz help me
Sent from my GT-S5310I using XDA Free mobile app
Click to expand...
Click to collapse
Use The Guide Then
karthick mostwanted said:
Use The Guide Then
Click to expand...
Click to collapse
I can use the guide but am i not gona need the right files to to root it? this one i am using is 5310I not just 5310. I don't want to brick my phone. It's on KitKat 4.4.2
skullhack said:
I can use the guide but am i not gona need the right files to to root it? this one i am using is 5310I not just 5310. I don't want to brick my phone. It's on KitKat 4.4.2
Click to expand...
Click to collapse
Hey your device is different chipset, you can't install this device CWM but you can root it with Keyroot app
I have followed karthik mostwanted instructions n everything went well in odin, sadly my device is not rooted and i cant get into recovery mode anymore. And my phone's keypads is untable in a way that long press while im typing. Is ther a way to fix the issue? If therz an official stock rom please share the link. Also please share link for ķeyRoot
Sent from my GT-S5310I using XDA Free mobile app
Rooting the Samsung Galaxy Pocket Neo with a Macintosh
Thanks for this walkthrough.
I was very excited to rid my phone of all the pre-loaded bloatware and prepared to root it.
However, I couldn't get past the "load up Odin" stage in the above instructions. This is because Odin is PC only.
Does anyone know how I can root my phone using Macintosh? Ideally, I would prefer not to run bootcamp or parallels.
I downloaded Heimdall, but wasn't able to find instructions.
Can someone helpful please give me a walkthrough on how to root my Samsung Galaxy Pocket Neo with a Macintosh?
KINGO ROOT worked for me, install kingo on you pc , connect you phone and click root
KINGO ROOT worked for me, install kingo on you pc , connect you phone and click root.
Its free and worked on all my fones this far.
kingoapp.com
skullhack said:
Can this method work on pocket neo s5310I running KitKat 4.4.2??
Sent from my GT-S5310I using XDA Free mobile app
---------- Post added at 02:34 AM ---------- Previous post was at 02:29 AM ----------
GT-5310I i meant to ask about.
Sent from my GT-S5310I using XDA Free mobile app
Click to expand...
Click to collapse
is the S5310b compatible with this ROOTING process?
Thanks.
Thanks a lot
Most of the people on xda getting error while flashing new update on YU yureka.
so i have created this thread to solve there's problems :highfive:
you just have to follow some steps.
1.you should be on stock recovery.
if you do not have stock recovery then here is LINK
************************************************************
2. now you need big data pack you have to download whole updated stock rom which is approx 643.767 MB
here is LINK.
3. now put this in internal storege(not in any folder or ext_sd card)
4. go to recovery and apply update. and choose this zip file and flash it :good:
and now very important step. Hit thanks button :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
sunny765 said:
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
Click to expand...
Click to collapse
yes bro if you want update then you should be on stock if you have backup ur stock rom then just restore it.
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Rakesh251 said:
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Click to expand...
Click to collapse
have tried flishify app?
LINK
flash using this.
i have not tried yes but search.
Why is it 643 mb the update is just 130mb
thearjunraju said:
Why is it 643 mb the update is just 130mb
Click to expand...
Click to collapse
'cos it's the "whole updated stock rom", i.e., stock rom + the latest update rolled into one convenient easy-to-use package. read the op.
i was reading stock kernel was needed
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
oemaritradey said:
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
Click to expand...
Click to collapse
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
feeroz123 said:
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
Please flash any custom kernel to see if it works or not :3
oemaritradey said:
Please flash any custom kernel to see if it works or not :3
Click to expand...
Click to collapse
I am on thunderzap kernel
enjoy happy flashing .
best of luck
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
LOL i tried falshing stock kernel with flashify both time i didnt get wifi signal(MAC UNKNOWN) xD Am not switching over to new update anytime soon....
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
feeroz123 said:
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
Click to expand...
Click to collapse
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
ashish_zarekar said:
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
Click to expand...
Click to collapse
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
feeroz123 said:
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
Click to expand...
Click to collapse
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
m_rajaganesh said:
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
Click to expand...
Click to collapse
DO NOT SPAM.
read carefully i already told the steps in my first POST
download stock kernel and flash it.
download stock recovery and flash it.
now download whole rom from my post and flash it.
ashish_zarekar said:
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Click to expand...
Click to collapse
I am sorry, I put it in wrong terms.
The CWM recovery (having basic look with text in blue that can be opted only using hardware buttons and not touch) is not shown for me now. The Cyanogen Recovery it shows me now looks new (with Apply Update option that can be opted by touch as well). THis new recovery fails whenever I try to flash any zip with it. The error being R/W error or something.
With the old recovery (CWM recovery) I could/did flash the Root.zip. After flashing this full ROM (having the patch), the old recovery is lost. It shows only the new recovery. And with it the Root.zip can not be flashed as it fails, as I mentioned earlier.
May be I will get you screenshots of the new Cyanogen recovery to explain what I mean.
Old CWM Recovery:
New Cyanogen Recovery:
Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1).
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:TWRP 3.0.0-0
Bugs:
MTP may not work correctly.
SlimPickins will not flash. Recommended to flash using TWRP 2, make a backup of the System, then upgrade to TWRP 3.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Let me just steal this...
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
bogarty said:
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yes, but not without the help of @Y300-0100.
xRaZeR_FuZioNx said:
Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1).
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:TWRP 3.0.0-0
Bugs:
MTP may not work correctly.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Click to expand...
Click to collapse
YASSS!! TWRP 3 is out! Now at least recovery can look nicer and much improved now.
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Thank you for letting me know. I can confirm this issue appears at the "formatting system" step. I'll look into this issue and see what may be causing it.
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Y300-0100 said:
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Click to expand...
Click to collapse
I don't believe so, if you're referring to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
thisisapoorusernamechoice said:
I don't believe so, if you're conflict bing to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
Click to expand...
Click to collapse
So as I thought. Wipe system definitely working but there must be some conflict between updare binary and updater script with twrp since you restored system. First recovery wipe system and than restore it.
this conflict is common when rom is made with kitchen.
So wait for cm. It won't be to long
Y300-0100 said:
So wait for cm. It won't be to long
Click to expand...
Click to collapse
God I can't wait. I synced the repos but I can't seem to get it to build, no matter what I tinker with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Unfortunately, that was the case for me, too. I was able to wipe but not able to install the Slim Pickins ROM. It came up with an error. So I had to go back to TWRP 2.8.7.0 and successfully install the ROM.
Thanks
I've hung out in the irc almost every day and got to see this be made and released thanks all to who contributed to it now to make cm
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
X_shinobi.apk_X said:
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
Click to expand...
Click to collapse
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
X_shinobi.apk_X said:
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
Click to expand...
Click to collapse
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try using flash fire by chainfire if you still need to install twrp and can't use a PC. It's the successor to mobile Odin and is compatible with way more devices including virtually every Samsung device. Flashify might work too. Obviously either app will require root
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I think the "reboot to recovery" causing a recovery loop issue might be a system one. It's always been an issue on this device. There are quite a few versions of TWRP now for the SM-G360T1, but all if them do it. I think it even did it with the stock recovery too. Not a big deal though in my mind. Just have to remember to always reboot normal.