I've read some threads but I don't understand them at all. I mean, how to install rafael baugis kernel when I have TouchWiz - Resurrection v7 by Sniper Killer installed already? What method should I use with the rom that has not installed CWM recovery as a default but the rom has been set up using that? Will I brick my phone if I flash kernel using stock recovery? I'm afraid of that part where installing rom is mentioned.
How to install Kernel with CWM or RZR:
shutdown the phone
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard" or "install menu"
select the file ( xxxxxxxxxxxx-XXX-boot.img.zip )
wait the end of process and reboot
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "mounts and storage" or "wipe menu"
format or wipe "/system", "/cache" and "data"
select the option "apply update from sdcard" or "install menu"
select the file ( Select_you_rom_file.zip ) and install
wait the end of process
select the option "apply update from sdcard" or "install menu"
select the file ( xxxxxxxxxxxx-modules.zip ) and install
wait the end of process and reboot
How to install Kernel with E3 Recovery (Stock):
shutdown the phone
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-XXX-boot.img.zip )
wait the end of process and reboot
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( Select_you_rom_file.zip )
wait the end of process
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-modules.zip )
wait the end of process and reboot
Click to expand...
Click to collapse
Could someone give an instruction step by step for all of newbies here? I will be grateful.
Download E3 PDA kernel which can be installed from ODIN. Go to download mode on your mobile and connect it eith the pc. On the ODIN program, place kernel on PDA section and flash. If you have no statusbar after installing just wipe data and cache.
Sent from my GT-S5830i using Tapatalk 2
Hmm...I've tried to install that kernel in another way. I've just skipped that part with installing rom. I went to stock e3 recovery mode then I installed boot.img, and next I rebooted system and the final step has been to install the modules.zip. Everything works correctly so far.
Should I expect any weird actions?
dzikizwierz said:
Hmm...I've tried to install that kernel in another way. I've just skipped that part with installing rom. I went to stock e3 recovery mode then I installed boot.img, and next I rebooted system and the final step has been to install the modules.zip. Everything works correctly so far.
Should I expect any weird actions?
Click to expand...
Click to collapse
I don't know. But if you have a 512 mb sd card partition install Cronmod Unofficial.
Sent from my GT-S5830i using Tapatalk 2
Related
Hi all,
appreciate all help in advance
I currently use the Litening ROM which was installed thanks to this thread
http://forum.xda-developers.com/showthread.php?t=1095274
works perfect now yesterday I stumbled across Miui Rom with the Ultimate Iphone theme which I really like and want on my s2 device!
http://www.youtube.com/watch?v=SKkrupyFg3s
i want this!
now I attempted this last night using the the rom from http://miuiandroid.com/roms/miui-development-roms/
then using CWM i carried out the following
Download the latest release from the downloads section and put it on your internal storage.
Boot into CWM, do this by powering off your phone and hold volume up and the home button while booting again.
Select "wipe data/factory reset" and confirm.
Select "wipe cache partition" and confirm.
Now go to "mounts and storage" select "format /system" and confirm.
Finally go to "advanced" select "wipe Dalvik Cache" and confirm.
Now select "install zip from sd card", "choose zip from sd card", browse to your zip select it and confirm.
Finally "reboot system now" and you’re finished.
but wen the phone rebooted it got stuck on the yellow triangle screen and wouldnt boot.
this morning i reverted back to litening rom using the original http://forum.xda-developers.com/showthread.php?t=1095274
please can someone help me got from the litening rom to the miui rom with the ultimate iphone them plz
Sorry, post edited
Help with installing a new rom
FIrst install a stock rom with odin from xda
http://forum.xda-developers.com/showthread.php?t=1075278
Make sure you download the correct country. EU UK
2 after instal of a stock rom after lightning rom I found my phone went into a boot loop DONT WORRY do a factory reset Home key volume up and power into recovery.
All should now be fine and you should be back to stock. Now inatall CWM cf Kernal from here
http://forum.xda-developers.com/showthread.php?t=1103399
I use the most up to date kernal at the bottom of the page. You will now see in your apps list CWM and or you can use buttons as above. Last install the new rom hope this helps
I rooted my phone months back and last week installed Olympus triten Rom with beats ultimatly decided I didn't like it and tried to install infectedrom eternity 3.5.
I did a factory reset erased as card then downloaded the Rom and installed via recovery. But whenever. I start my phone I get the beats bootbscree. From Olympus. Also tried to install the infected theme for infectedrom via recovery and it just bricks.the phone.
Here's how to fix it:
I'll assume you are using TWRP recovery. If you are using clockworkmod, it will be similar. If you use ROM Manager, you have clockworkmod. If you don't know/didn't install one, you have TWRP.
1. Turn phone completely off
2. remove battery and put it back in
3. Boot into bootloader - Hold volume down and power until it boots into a menu
It might say no PG86IMG found. Ignore that.
4. Use volume down to navigate to the RECOVERY option
5. Press power to select it when it is highlighted
The recovery will load. Once you see a black menu, continue.
Notes for when you are in recovery: Use volume down+up to navigate and press power to select options.
6. Again, use volume down or volume up to navigate to the wipe menu
7. Select 'Wipe Everything'
8. Once it's done wiping, leave the wipe menu if you are still in it.
9. Go to Install Zip
10. Select infectedROM
11. Select 'Flash Zips Now'
12. Zip will flash
13. Reboot after flash
If you are using clockworkmod...
After getting into recovery:
Notes for when you are in recovery: Use volume down+up to navigate and press power to select options.
1. Wipe everything
2. select install zip
3. select infected ROM zip
4. Select yes to confirm
5. Zip will flash
6. After flash, reboot
Notes for when flashing a new rom:
-You don't need to erase SD card. In fact, it's recommended you don't.
-Instead of factory resetting, wipe through the recovery using the steps above. It is more effective.
-If the problem still isn't fixed, download infectedrom again and try flashing it.
I would like to install VillainRom 3.0 on my GS2
http://forum.xda-developers.com/showthread.php?t=1198334
I already have
Root acces
CWM
Base Band: I9100UHKD8
Kernel: [email protected] #2 (CF-ROOT)
Build number: GINGERBREAD.UMKK1
but obviously as a noob I have to many questions..
It is compatible with my phone
It is complicated to install?
Thanks
Regards
yes, it is compatible with your phone.
Just read, understand and then follow the developers instruction on lash with cwm.
Cosmic Blue said:
yes, it is compatible with your phone.
Just read, understand and then follow the developers instruction on lash with cwm.
Click to expand...
Click to collapse
Where to start.. In CWM after save villain on SD, just flash update.zip?
Coming from Another ROM
Ensure CWM recovery is available, do a CWM/nandroid backup and titanium backup, and put the zip onto the root of the internal SD.
Enter CWM, carry out a factory reset, and cache wipe, and flash the ROM via "Install zip from SD" option.
Reboot the phone into VillainROM, bearing in mind the first boot may take some time on the boot animation.
Click to expand...
Click to collapse
1. download and copy the villian zip file to your sd card after making a back up of your data.
2. go into cwm- boot into recovery, clean cache. Stay in recovery mode.
3. go advanced and clean dalvik cache. Stay in recovery mode
4 select install zip file.
5. choose zip from sd card, scroll down to the zip file you have download.
6. select and agree to install.
7. let it install, scroll back up to reboot system.
8. rom will install it may take up to 5 minutes for the first install.
You can scrool up down in recovery mode by using the volume keys. power button or homke button selects depending on what version of cwm you have.
back button returns you back on screen.
Cosmic Blue said:
1. download and copy the villian zip file to your sd card after making a back up of your data.
2. go into cwm- boot into recovery, clean cache. Stay in recovery mode.
3. go advanced and clean dalvik cache. Stay in recovery mode
4 select install zip file.
5. choose zip from sd card, scroll down to the zip file you have download.
6. select and agree to install.
7. let it install, scroll back up to reboot system.
8. rom will install it may take up to 5 minutes for the first install.
You can scrool up down in recovery mode by using the volume keys. power button or homke button selects depending on what version of cwm you have.
back button returns you back on screen.
Click to expand...
Click to collapse
Thanks.. simple and detailed, thats what a noob (like me) need
update: Instaled Villain 3.0 + Sk0pdr0id 1.6
Hi...
I am from Portugal and i have my Optimus One in 2.3.3 stock, already rooted.
I am thinking in try the GTR v3x and some CM. (These roms are made for the new baseband?)
I want to someone correct me if these are not the right way of doing the process of flashing...
have a rooted device
instal rom manager
instal clockworkmod via rom manager.
copy .rar to the sd (root?)
turn off
Home + Vol Down + Power
wipe what the developer say and the flash it.
Also, i want to know if the process of flashing unlock the phone (SIM Locked)?
Sorry for opening the threat and thanks in advance
Hi,
Your process is correct, however I would do it a bit differently to be honest.
Yes, I would install clockwork mod through ROM Manager. And boot it up using home + vol dwn + power.
To navigate, use the menu button to move down, and home button to move up in CWM. The back button is for back and search button for select.
To prepare installing a rom, I would do these in order:
Code:
Wipe data/factory reset
Wipe cache partition
Format /system/ by going into 'mounts and storage'
Wipe Dalvik Cache and Battery stats under 'Advanced'
Also, the rom should be a zip file, not a rar. I'm sure you meant zip in your post.
To flash the rom after wiping those stuff above^, just select 'Install zip from sd' from the main menu, and select the first option to select the zip file from your sd, and then find your rom.zip file and flash.
Then you're done. You can flash kernels and other stuff through this method too, just don't erase anything unless you're installing a new rom, as there's no need to.
Also make sure you have the right baseband for the rom
I have been trying to install Resurruction Rom and here is my present status
Build - XXLQ6
ROM - SiyahKernel S2-v6.0beta4
The phone is presently rooted and is on ICS.
My next question (I have read the OP and here is what it has)
Reboot into recovery (Turn off your phone then press and hold the keys: Volume Up + Power + Home)
Wipe Data / Factory Reset
Install the Main ROM file -- Wat does this mean ?? Is it "Apply update from SD Card ??
In AROMA installer select "Custom Installation" -- Is this after the reboot ??
Choose depending of your taste
When AROMA installer finish untick the "Reboot Now" option
When you're back on the recovery go to Advanced
Wipe Dalvik Cache
Fix Permissions
Wipe Cache Partition
Reboot
When you get the step for add your Google Account, if you don't have a WiFi enabled or you can' add it, skip it
When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot the phone
When you boot again into the system, the data will be enabled and you can do the configuration of Google Account (if you don't do this step before)
This is the moment for install all the extras like themes, mods, fixes, kernels, etc.
¡Enjoy!
Please help me with those 2 steps people..
Coolkriss said:
Reboot into recovery (Turn off your phone then press and hold the keys: Volume Up + Power + Home)
Wipe Data / Factory Reset
Install the Main ROM file -- Wat does this mean ?? Is it "Apply update from SD Card ??
In AROMA installer select "Custom Installation" -- Is this after the reboot ??
Please help me with those 2 steps people..
Click to expand...
Click to collapse
1) It means that you have to install the zip-file you've downloaded. So, just the rom-file. In Recovery, just go to 'Install zip from sd-card'.
2) No. When you flash the rom, Aroma will be started automatically from CWM (you'll see it when you try it).
So, boot into Recovery, make a Nandroid backup, do a full wipe, Install zip from sd-card (the rom-file), Aroma will be started, press Custom Installation, don't reboot afterwards but follow the steps that are written in the RR-thread.
Sent from the Matrix
Thanks man.. Am all set now .. cool
<snip>