Related
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
I was using XZXperience 2 on my Sony Xperia S, and then sony companion detected that i had firmware 6.1.A.1.45 and 6.1.A.55 was available, so just to give it a try, I installed that update, but that is a failed update, it says unfortunately music player stopped working, or unfortunately xperia keyboard stopped working etc. The main problem is that my system does not recognize my XS anymore, it says USB Device Not Recognized, so I cant connect it to Flashtool or PC Companion for repair. The Sad part is that I cant even connect it in Flash Mode, I tried a hard reset by using power button and volume up buttons, but no use. I should mention that once it recognized my phone when i turned off my laptop and removed its battery too, after restarting both phone and laptop, flashtool detected that phone was connected with USB Debugging OFF, though it was on, but as a try, I unchecked USB Debugging and then checked it again, and it worked. Now my Xperia S was connected in USB debugging mode, I tried to install busybox, rooted it, and tried to install CWM recovery,flashtool said that busy box was installed and phone was rooted, but it could not install recovery and I used another tool to install recovery,which had a bat file and it installs recovery automatically. But it didnt. After restarting my phone, the same issue appeared again, My PC does not recognize my Xperia S, tried previous procedure several times, but no use. Cant even repair it as my set cant go in flash mode. What can I do? have I bricked my Xperia S? I`m in Pakistan and there is no official Sony Mobile franchise as they dont launch their flagships in Pakistan. Please help me, considering I`m used to with rooting,flashing etc. How can I connect my phone in flash mode? Thank you.
Thanx
Sewrizer said:
It looks like another strike from the productors. They usually send you malicious updates which cause your device to stop working. This only happens to rooted phones which run custom roms. And since the rooted users only flash their roms in zip format, sending an OTA update patch(designed for stock rom) to a custom rom can only lead to a malfunction. I am not sure whether or not sony did that on purpose, but the truth is that after installing a custom rom NEVER do OTA updates(unless they are from the rom's developer).
If you want an update check your rom's thread and there may be new flashable versions.
As for making your device work, the only thing you can do is to call technical support or go to a phone service(in my country they are called gsm services, and they fix mostly everything, both hardware and software. Some even claim to be able to fix water damage) but given that your warranty is voided, you will have to pay for the reparations. I guess they will only do a re-soft(delete everything, and install the stock version, you may lose your root, i am not sure here.)
I hope this helps, this is how we fix things like this in our country, so it will work in your case too, hopefully.
Sent from Area 51 using my HTC Sensation XE, hit thanks if I helped
Click to expand...
Click to collapse
Thanx for your advice. I was almost hopeless, but after spending continous 16 hours, I`m now able to get a solution. I got another data cable, removed battery of my laptop, and made a hard reset to my phone, and after 10-15 min I tried again, and Thanx GOD, it detected my phone, so I hurriedly start repair my phone option and connected my phone in flash mode which was successful and that was not less than a miracle, because i`ve been repeating same procedure and it was not working, this time luckily it worked, now i`m using stock rom with firmware 6.1.A.2.55. Now I would either wait for official Sony JB Update or I would flash a custom ROM XZXperience 2, which I found awsome, as it had no bugs, and it improved battery and sound quality was significantly imrpove + Bravia Engine 2 with improved graphics. I would ask users to not to give up hope, there is always a solution to every problem.
device not recognized
jibraiel.hassan said:
Thanx for your advice. I was almost hopeless, but after spending continous 16 hours, I`m now able to get a solution. I got another data cable, removed battery of my laptop, and made a hard reset to my phone, and after 10-15 min I tried again, and Thanx GOD, it detected my phone, so I hurriedly start repair my phone option and connected my phone in flash mode which was successful and that was not less than a miracle, because i`ve been repeating same procedure and it was not working, this time luckily it worked, now i`m using stock rom with firmware 6.1.A.2.55. Now I would either wait for official Sony JB Update or I would flash a custom ROM XZXperience 2, which I found awsome, as it had no bugs, and it improved battery and sound quality was significantly imrpove + Bravia Engine 2 with improved graphics. I would ask users to not to give up hope, there is always a solution to every problem.
Click to expand...
Click to collapse
I have sony xperia s.....before it was working perfectly fine but than suddenly i got message on my laptop usb device not recognized.. i have not rooted my phone than also.. since then m suffering from it and transferring files via wi fi... please help me.. i tried almost every thing.. but i dont know how to perform hard reset.... and what kind of new data cable are u talking about..as i bought this phone from other country so sony service center is not entertaining....
pratik1315 said:
I have sony xperia s.....before it was working perfectly fine but than suddenly i got message on my laptop usb device not recognized.. i have not rooted my phone than also.. since then m suffering from it and transferring files via wi fi... please help me.. i tried almost every thing.. but i dont know how to perform hard reset.... and what kind of new data cable are u talking about..as i bought this phone from other country so sony service center is not entertaining....
Click to expand...
Click to collapse
Get a new data cable, fortunately almost all phone now a days have same data cable, u can try data cable of some HTC, Samsung, Blackberry or even Iphone`s data cable. Secondly, u must turn off your PC, and remove its power source, if it is laptop then also remove its battery. Then after 5-10 minutes, turn on your PC and connect the phone. Also try installing drivers, which u can by using PC Companion. You can also install drivers by using FlashTool. Download it and extract it, then go to the installation folder and look for folder "Drivers" open it and u will see an exe file. Just run it and select Xperia S and follow the instructions.
maybe not new usb cable sometimes usb port is broken
Hey, I had the same problem a few time ago, you can try to restore with flashtool, if you can still get in to flash mode
Sony xperia S not starting
Plzzzz help I m realy worried
few months back i had unlocked the bootloader of my xperia s and flashed CWM 10 on it...Now i Thought of locking the bootloader and to get official updates...i locked the bootloader directly by using flash tool....after i locked it and tried to turn on the phone it is not turning on...a green light just flashes once and the phone vibrates once after that nothing happens...plzzz helppp
elegantuser29 said:
Plzzzz help I m realy worried
few months back i had unlocked the bootloader of my xperia s and flashed CWM 10 on it...Now i Thought of locking the bootloader and to get official updates...i locked the bootloader directly by using flash tool....after i locked it and tried to turn on the phone it is not turning on...a green light just flashes once and the phone vibrates once after that nothing happens...plzzz helppp
Click to expand...
Click to collapse
-.-
There's nothing strange: you are using a custom kernel and you have locked bootloader
It's impossible it could work
You need to flash official stock rom to boot up
Sent from my LT26i using xda app-developers app
Phone responded
mirhl said:
-.-
There's nothing strange: you are using a custom kernel and you have locked bootloader
It's impossible it could work
You need to flash official stock rom to boot up
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
the phone has responded and is working now...i unlocked the boodloader using cmd..and the phone worked...One Thing plzz tell that i want to bring my phone to stock ics from sony..and want to get the OTA update...is it possible??
elegantuser29 said:
the phone has responded and is working now...i unlocked the boodloader using cmd..and the phone worked...One Thing plzz tell that i want to bring my phone to stock ics from sony..and want to get the OTA update...is it possible??
Click to expand...
Click to collapse
Since you CAN'T use custom kernels with locked bootloader (and so, no cm10)
You only need to flash stock rom and then relocking your bootloader
http://forum.xda-developers.com/showthread.php?p=23180725
Sent from my LT26i using xda app-developers app
I am also having the same problem
I have sony Xperia S. I updated to the latest stock firmware version(6.2.B.1.96). after this update I rooted my phone using old kernel .200 and update the firmware's kernel again to stock after that I locked the boot loader again. Now I can't use memory stick that I used to use before with OTG cable. And now, if I am trying to enter flash mode by pressing volume down key, the led turn green for a while only about 10 sec while this was happening, my pc say that USB device not recognized. So, now I can't use flashtool or sony update service tool(SUS) as well.
Now I am using stock .96 rom with no error but I want to install CWM and also want to unlock boot loader again to test some custom roms.
Pls help me what I have to do and what should. I am now in Delhi.
aungthumoe said:
I have sony Xperia S. I updated to the latest stock firmware version(6.2.B.1.96). after this update I rooted my phone using old kernel .200 and update the firmware's kernel again to stock after that I locked the boot loader again. Now I can't use memory stick that I used to use before with OTG cable. And now, if I am trying to enter flash mode by pressing volume down key, the led turn green for a while only about 10 sec while this was happening, my pc say that USB device not recognized. So, now I can't use flashtool or sony update service tool(SUS) as well.
Now I am using stock .96 rom with no error but I want to install CWM and also want to unlock boot loader again to test some custom roms.
Pls help me what I have to do and what should. I am now in Delhi.
Click to expand...
Click to collapse
To unlock the bootloader you need to enter fastboot (blue led) with vol+ during the boot, not vol-
Or you can also reboot the phone from adb with
adb reboot bootloader
If phone still doesn't stick to fastboot, it has to be a driver problem
There are lots of guide on the procedure (which is really hard on windows 8)
Sent from my noobish GT-I9100 using xda app-developers app
Yes i use windows 8.1
mirhl said:
To unlock the bootloader you need to enter fastboot (blue led) with vol+ during the boot, not vol-
Or you can also reboot the phone from adb with
adb reboot bootloader
If phone still doesn't stick to fastboot, it has to be a driver problem
There are lots of guide on the procedure (which is really hard on windows 8)
Sent from my noobish GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes I use windows 8.1
now. I can't use memory stick with OTG cable but I can only use mouse or keyboard with OTG cable. I don't know why?
I can access fastboot mode but I can't access flash mode. pc said that device not recognized. so, I think it is device error.
aungthumoe said:
Yes I use windows 8.1
now. I can't use memory stick with OTG cable but I can only use mouse or keyboard with OTG cable. I don't know why?
I can access fastboot mode but I can't access flash mode. pc said that device not recognized. so, I think it is device error.
Click to expand...
Click to collapse
I dont really understand what you did
But my advice is: unlock your BL and enjoy the magic of aosp ROMs (magic included inside doomkernel for stock sony is fine too)
Sent from my noobish GT-I9100 using xda app-developers app
Bricked my phone - please help!
Hi,
I think I bricked my Xperia S. I already had cyanogen 10 on my phone, so I thought I could just flash the new Cyanogen 11 4.4.2 ROM and GAPPS over top. I followed the instructions but I skipped the Fastboot step. I cleared the cache and system and then went ahead with the ROM and GAPPS. Once the ROM and GAPPS were installed, I selected "Reboot" and the phone turned off and now it won't boot at all. If I hold the power button, I get a faint vibration and if I hold the up volume and power I get the 3 vibration sequence but no boot. Please help!
This is what I was using:
http://forum.xda-developers.com/showthread.php?t=2555243
Hye Guys
as per title, i read most of the solution ( i think so) in this forum, but none can solve mine,
because..
1) my original usb cable cant be detected by my pc so I cant use ODIN
2) the android recovery does not have "install zip from sd card" , so i cant flash cwm and root
so, my tab isnt rooted and I cant flash to a new rom due to above reason
This is all happened when I tried to factory reset from stock ICS..
please help me with a good solution
khaix said:
Hye Guys
as per title, i read most of the solution ( i think so) in this forum, but none can solve mine,
because..
1) my original usb cable cant be detected by my pc so I cant use ODIN
2) the android recovery does not have "install zip from sd card" , so i cant flash cwm and root
so, my tab isnt rooted and I cant flash to a new rom due to above reason
This is all happened when I tried to factory reset from stock ICS..
please help me with a good solution
Click to expand...
Click to collapse
try to uninstall yours device drivers from pc. Do a fresh clean and reinstall em. After that if u can t link your device maybe you have a broken cable.
Anyway u aren y be able to see install to zip option because your device isn t rooted yet and u can do that using odin or twp as i know.
^ what he said...your main problem is getting your tab connected to PC. Either reinstall your drivers or use another cable. Once that's done, Odin flash cwm recovery and then only you can root and install custom ROMs.
Sent from my GT-P7500 using Tapatalk HD
khaix said:
Hye Guys
as per title, i read most of the solution ( i think so) in this forum, but none can solve mine,
because..
1) my original usb cable cant be detected by my pc so I cant use ODIN
2) the android recovery does not have "install zip from sd card" , so i cant flash cwm and root
so, my tab isnt rooted and I cant flash to a new rom due to above reason
This is all happened when I tried to factory reset from stock ICS..
please help me with a good solution
Click to expand...
Click to collapse
1. Do you have correct driver installed ?
2. Did you try using it as OTG with your usb drive whether it connect as storage ?
3. If you can boot to recovery mode , you'll surely have the option "install zip from sd card" .Try look again into it.What's your recovery version ?
4. You can set your PC folder as Sharing samba and put your 10.1 root.zip into your sdcard.Install es explorer and copy the file as LAN wifi router.
5. Manual back to recovery and root it again.
6. Install latest recovery ver via odin again
Hope it helps
khaix said:
Hye Guys
as per title, i read most of the solution ( i think so) in this forum, but none can solve mine,
because..
1) my original usb cable cant be detected by my pc so I cant use ODIN
2) the android recovery does not have "install zip from sd card" , so i cant flash cwm and root
so, my tab isnt rooted and I cant flash to a new rom due to above reason
This is all happened when I tried to factory reset from stock ICS..
please help me with a good solution
Click to expand...
Click to collapse
You don't have the install zip from sdcard because you're recovery is stock...and the old ( update from sdcard option ) on stock recovery was removed in 4.0.4 ICS...So that's out.
Do as above stated and try a fresh install of drivers/or older set and a different version of Odin. I have an older version linked in my FAQ thread...but only use the recovery zip and root zip in the link if you have a p4wifi only tablet. The Odin version will work though for any tablet model.
I'll look around..I might have an alternative way...but I'm not sure. I'll post back later today, as I'm at work..:good:
---------- Post added at 11:44 AM ---------- Previous post was at 11:34 AM ----------
khaix said:
Hye Guys
as per title, i read most of the solution ( i think so) in this forum, but none can solve mine,
because..
1) my original usb cable cant be detected by my pc so I cant use ODIN
2) the android recovery does not have "install zip from sd card" , so i cant flash cwm and root
so, my tab isnt rooted and I cant flash to a new rom due to above reason
This is all happened when I tried to factory reset from stock ICS..
please help me with a good solution
Click to expand...
Click to collapse
Give this thread a read and try the app...its called Framaroot...it has a new exploit that might now work with you're device. If it doesn't..no harm done. But read the thread op...as it will give you info on some things to try if the app fails the first time.
Let me know if it works.. So I can update my FAQs thread and you or myself can post to the apps thread to help update the supported devices for the op over there...Thanks
.... http://forum.xda-developers.com/showthread.php?t=2130276
eushaun99 said:
^ what he said...your main problem is getting your tab connected to PC. Either reinstall your drivers or use another cable. Once that's done, Odin flash cwm recovery and then only you can root and install custom ROMs.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
xdadfm said:
1. Do you have correct driver installed ?
2. Did you try using it as OTG with your usb drive whether it connect as storage ?
3. If you can boot to recovery mode , you'll surely have the option "install zip from sd card" .Try look again into it.What's your recovery version ?
4. You can set your PC folder as Sharing samba and put your 10.1 root.zip into your sdcard.Install es explorer and copy the file as LAN wifi router.
5. Manual back to recovery and root it again.
6. Install latest recovery ver via odin again
Hope it helps
Click to expand...
Click to collapse
geloso78 said:
try to uninstall yours device drivers from pc. Do a fresh clean and reinstall em. After that if u can t link your device maybe you have a broken cable.
Anyway u aren y be able to see install to zip option because your device isn t rooted yet and u can do that using odin or twp as i know.
Click to expand...
Click to collapse
Gil81 said:
You don't have the install zip from sdcard because you're recovery is stock...and the old ( update from sdcard option ) on stock recovery was removed in 4.0.4 ICS...So that's out.
Do as above stated and try a fresh install of drivers/or older set and a different version of Odin. I have an older version linked in my FAQ thread...but only use the recovery zip and root zip in the link if you have a p4wifi only tablet. The Odin version will work though for any tablet model.
I'll look around..I might have an alternative way...but I'm not sure. I'll post back later today, as I'm at work..:good:
---------- Post added at 11:44 AM ---------- Previous post was at 11:34 AM ----------
Give this thread a read and try the app...its called Framaroot...it has a new exploit that might now work with you're device. If it doesn't..no harm done. But read the thread op...as it will give you info on some things to try if the app fails the first time.
Let me know if it works.. So I can update my FAQs thread and you or myself can post to the apps thread to help update the supported devices for the op over there...Thanks
.... http://forum.xda-developers.com/showthread.php?t=2130276
Click to expand...
Click to collapse
guys, thank you for trying to help,
but sorry, none above can solve the problem,
for cable and driver issue ;
i already tried to uninstall and install various type of galaxy tab p7500 driver that available in the internet, and tried to connect it to my pc, my friend's and my wife's pc but still a NO, tried to change the setting>storage>choose usb pc connection, disable USB debugging, but still nothing
and i tried to use the cable to connect my wife's galaxy tab to pc, and it works just fine
so confirm : driver - OK , cable - OK
for ODIN ; NO GO
as related to above issue, i tried to download mode and nothing happen, on the screen only appear "waiting for usb" and no yellow signal from ODIN in pc, tried with Odin3-v1.85
for recovery ; NO GO
in the screen tab, it appear version Android System Recovery <3e>
it only have menu:
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
with the help from airdroid app(via wifi), i put cwm file recovery.img and update.zip/root.zip/superuser.zip for root, but none of them is detected in the recovery
so neither rooting nor flashing can be done here
for Framaroot app NO GO
i installed Framaroot-1.6.1 into the tab, it rejected right away, not supported
mobile odin pro 3.76 ; NO GO
need to root first
terminal emulator; PENDING
need to root, but i found somewhere in the internet that we can root via TE just that need the specific code, I have no idea on this, tried to search terminal emulator help for galaxy tab 10.1 but none found, only found for other devices.
and another problem i cant type anything in the TE
so Terminal Emulator ; can't type , not sure the script/command
USB OTG;
i have no clue on this, do i need a specific driver?
so, is it Terminal emulator or usb otg might able to solve the problem?
really appreciate ur assistance, guys
@khaix
Seen this...maybe worth a try...
Quick STEP:
1. Connect TAB to PC ( with its corresponding USB cord )
2. While its connected ( MTP connected appears on your TAB )
3. GO to Control Panel on your PC ( Find the Devices and printer )
4. while in the " Devices and Printer ( SAMSUNG ANDROID will appear w/ a red marker saying " it has a problem connecting " )
5. Right Click the " SAMSUNG ANDROID " and press the fix problem .
6. then it will automatically fix the problem why your TAB wont connect to your PC ( Just fallow the troubleshoot steps )
7. Then its a rap.
If that is not an option...
Try uninstalling drivers and kies..reboot you're computer( make sure drivers were uninstalled ). Now reinstall drivers,but not kies. Or just plug in you're device and let it download the drivers..but no kies..
Try these two options to get connected and let me know...if they don't work I'll keep look...
---------- Post added at 09:32 PM ---------- Previous post was at 08:56 PM ----------
@khaix
Read this thread op and try this rooting apk.. http://forum.xda-developers.com/showthread.php?t=2050297
Also...what android version are you running...Lol. I should have led with that question.
Gil81 said:
@khaix
Read this thread op and try this rooting apk.. http://forum.xda-developers.com/showthread.php?t=2050297
Also...what android version are you running...Lol. I should have led with that question.
Click to expand...
Click to collapse
I don't think that thread will work. That is for exynos 4 devices while our tab is tegra 2.
Sent from my GT-P7500 using Tapatalk HD
---------- Post added at 12:04 PM ---------- Previous post was at 11:57 AM ----------
khaix said:
guys, thank you for trying to help,
but sorry, none above can solve the problem,
for cable and driver issue ;
i already tried to uninstall and install various type of galaxy tab p7500 driver that available in the internet, and tried to connect it to my pc, my friend's and my wife's pc but still a NO, tried to change the setting>storage>choose usb pc connection, disable USB debugging, but still nothing
and i tried to use the cable to connect my wife's galaxy tab to pc, and it works just fine
so confirm : driver - OK , cable - OK
for ODIN ; NO GO
as related to above issue, i tried to download mode and nothing happen, on the screen only appear "waiting for usb" and no yellow signal from ODIN in pc, tried with Odin3-v1.85
for recovery ; NO GO
in the screen tab, it appear version Android System Recovery <3e>
it only have menu:
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
with the help from airdroid app(via wifi), i put cwm file recovery.img and update.zip/root.zip/superuser.zip for root, but none of them is detected in the recovery
so neither rooting nor flashing can be done here
for Framaroot app NO GO
i installed Framaroot-1.6.1 into the tab, it rejected right away, not supported
mobile odin pro 3.76 ; NO GO
need to root first
terminal emulator; PENDING
need to root, but i found somewhere in the internet that we can root via TE just that need the specific code, I have no idea on this, tried to search terminal emulator help for galaxy tab 10.1 but none found, only found for other devices.
and another problem i cant type anything in the TE
so Terminal Emulator ; can't type , not sure the script/command
USB OTG;
i have no clue on this, do i need a specific driver?
so, is it Terminal emulator or usb otg might able to solve the problem?
really appreciate ur assistance, guys
Click to expand...
Click to collapse
As said before, you can't flash anything in your current t recovery because it is the stock recovery. About TE, for some reason you can't type anything using the stock Samsung keyboard. Download Google Keyboard from play store then you can type in it. But you won't be able to write the recovery.img into your tab because that would require root.
Try to go to Settings -> Storage -> press the menu button or the 3 dot button (whatever it is you want to call it) at the top right -> make sure the first checkbox is ticked.
Sent from my GT-P7500 using Tapatalk HD
Thanks for catching that...wow. I must be tired...well at least it won't hurt anything if he tries it..thank gosh.
I'm out..lol ... I'll hit you're thanks button tomorrow. 8 skate...no rebate..I'm all out.
Gil81 said:
@khaix
Seen this...maybe worth a try...
Quick STEP:
1. Connect TAB to PC ( with its corresponding USB cord )
2. While its connected ( MTP connected appears on your TAB )
3. GO to Control Panel on your PC ( Find the Devices and printer )
4. while in the " Devices and Printer ( SAMSUNG ANDROID will appear w/ a red marker saying " it has a problem connecting " )
5. Right Click the " SAMSUNG ANDROID " and press the fix problem .
6. then it will automatically fix the problem why your TAB wont connect to your PC ( Just fallow the troubleshoot steps )
7. Then its a rap.
If that is not an option...
Try uninstalling drivers and kies..reboot you're computer( make sure drivers were uninstalled ). Now reinstall drivers,but not kies. Or just plug in you're device and let it download the drivers..but no kies..
Try these two options to get connected and let me know...if they don't work I'll keep look...
---------- Post added at 09:32 PM ---------- Previous post was at 08:56 PM ----------
@khaix
Read this thread op and try this rooting apk.. http://forum.xda-developers.com/showthread.php?t=2050297
Also...what android version are you running...Lol. I should have led with that question.
Click to expand...
Click to collapse
eushaun99 said:
I don't think that thread will work. That is for exynos 4 devices while our tab is tegra 2.
Sent from my GT-P7500 using Tapatalk HD
---------- Post added at 12:04 PM ---------- Previous post was at 11:57 AM ----------
As said before, you can't flash anything in your current t recovery because it is the stock recovery. About TE, for some reason you can't type anything using the stock Samsung keyboard. Download Google Keyboard from play store then you can type in it. But you won't be able to write the recovery.img into your tab because that would require root.
Try to go to Settings -> Storage -> press the menu button or the 3 dot button (whatever it is you want to call it) at the top right -> make sure the first checkbox is ticked.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Hi guys,
I already unistalled Kies and the tab driver, restart, install the latest usb driver and restart again, and connect my tab to pc, still nothing, but when i ttried my wife's tab, it immediately detected the tab, so the cable is ok, only something is wrong with the tab...
i also double checked at setting>storage>3 lines at right end corner>media device (mtp)
still nothing
ok, one thing i forgot to mention
this problem happen after I did a factory reset on this tab. now got "x" red cross at battery bar, and when i switch it off, it appear the charging bar like it is charging even it is not. and end up battery still draining even in off mode
also sim card cant be detected..
khaix said:
Hi guys,
I already unistalled Kies and the tab driver, restart, install the latest usb driver and restart again, and connect my tab to pc, still nothing, but when i ttried my wife's tab, it immediately detected the tab, so the cable is ok, only something is wrong with the tab...
i also double checked at setting>storage>3 lines at right end corner>media device (mtp)
still nothing
ok, one thing i forgot to mention
this problem happen after I did a factory reset on this tab. now got "x" red cross at battery bar, and when i switch it off, it appear the charging bar like it is charging even it is not. and end up battery still draining even in off mode
also sim card cant be detected..
Click to expand...
Click to collapse
Sounds to me like you need to clean the charger port...it might have something crossed over...I've seen this in the epic 4g touch forum.. You're device is reading that something is in contact with the charging port...since its not reading the cable that came with the device..it puts the red x over the battery bar. You can't charge these tabs with just any cord..unless you're running a custom ROM..
The sim card I'm not sure...check that port and we'll proceed from there..
Gil81 said:
Sounds to me like you need to clean the charger port...it might have something crossed over...I've seen this in the epic 4g touch forum.. You're device is reading that something is in contact with the charging port...since its not reading the cable that came with the device..it puts the red x over the battery bar. You can't charge these tabs with just any cord..unless you're running a custom ROM..
The sim card I'm not sure...check that port and we'll proceed from there..
Click to expand...
Click to collapse
I just did that, clean the port carefully and tried again to connect to pc
The result still the same, not detected but only chargin like before, with red x on the battery bar
This is so frustating, am i reaching a dead end?
Sorry if you mentioned it before, but is your tab able to connect to PC normally? I mean without download mode and Odin and all those stuff.
And all this happens after you factory reset your tab using stock recovery right?
Sent from my GT-P7500 using Tapatalk HD
Gil81 said:
Sounds to me like you need to clean the charger port...it might have something crossed over...I've seen this in the epic 4g touch forum.. You're device is reading that something is in contact with the charging port...since its not reading the cable that came with the device..it puts the red x over the battery bar. You can't charge these tabs with just any cord..unless you're running a custom ROM..
The sim card I'm not sure...check that port and we'll proceed from there..
Click to expand...
Click to collapse
eushaun99 said:
Sorry if you mentioned it before, but is your tab able to connect to PC normally? I mean without download mode and Odin and all those stuff.
And all this happens after you factory reset your tab using stock recovery right?
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
nope, my tab cant connect to pc manually, not even download mode nor odin, coz it totally cant be detected by any pc
i believe yes, i did a factory reset via setting>backup and reset>factory reset...and right after that it became weird..
1)got red 'x' on battery bar
2)when i switch it off, appear charging bar even it is not charging
3)cant connect to pc
4)sim card not detected
5)auto update always fail
khaix said:
nope, my tab cant connect to pc manually, not even download mode nor odin, coz it totally cant be detected by any pc
i believe yes, i did a factory reset via setting>backup and reset>factory reset...and right after that it became weird..
1)got red 'x' on battery bar
2)when i switch it off, appear charging bar even it is not charging
3)cant connect to pc
4)sim card not detected
5)auto update always fail
Click to expand...
Click to collapse
The x happens when connected to USB or charging? If USB then its normal since by default it isn't charging.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
The x happens when connected to USB or charging? If USB then its normal since by default it isn't charging.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
If its showing the charge icon when not plugged in...don't you think its a port issue...maybe something stuck or bent inside..I've seen this in the e4gt forum. I'm going to look at what their fix was..
Thanks for all the help you give in this forum..:good:
---------- Post added at 11:05 AM ---------- Previous post was at 10:41 AM ----------
khaix said:
nope, my tab cant connect to pc manually, not even download mode nor odin, coz it totally cant be detected by any pc
i believe yes, i did a factory reset via setting>backup and reset>factory reset...and right after that it became weird..
1)got red 'x' on battery bar
2)when i switch it off, appear charging bar even it is not charging
3)cant connect to pc
4)sim card not detected
5)auto update always fail
Click to expand...
Click to collapse
Look at this thread.. http://www.androidtablets.net/forum...galaxy-tab-10-1-not-charging-brand-new-3.html
I'm thinking it has to be the port or the 30 pin connector...I know. You said it works with other devices...but trust me when I say...technology is a fickle mistress...
Did he say that? Whoops, I think I missed it.
I don't know much about these ports so I'll let you take over this thread.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
The x happens when connected to USB or charging? If USB then its normal since by default it isn't charging.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Gil81 said:
If its showing the charge icon when not plugged in...don't you think its a port issue...maybe something stuck or bent inside..I've seen this in the e4gt forum. I'm going to look at what their fix was..
Thanks for all the help you give in this forum..:good:
---------- Post added at 11:05 AM ---------- Previous post was at 10:41 AM ----------
Look at this thread.. http://www.androidtablets.net/forum...galaxy-tab-10-1-not-charging-brand-new-3.html
I'm thinking it has to be the port or the 30 pin connector...I know. You said it works with other devices...but trust me when I say...technology is a fickle mistress...
Click to expand...
Click to collapse
eushaun99 said:
Did he say that? Whoops, I think I missed it.
I don't know much about these ports so I'll let you take over this thread.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
sorry for didnt mention it earlier, actually the 'red x' is appear all the time, not just while charging or connect to pc, when i switch the tab on, the red x is there on the battery bar all the time..
however i will still try to blow something into the port, and see if it works...
khaix said:
Hye Guys
as per title, i read most of the solution ( i think so) in this forum, but none can solve mine,
because..
1) my original usb cable cant be detected by my pc so I cant use ODIN
2) the android recovery does not have "install zip from sd card" , so i cant flash cwm and root
so, my tab isnt rooted and I cant flash to a new rom due to above reason
This is all happened when I tried to factory reset from stock ICS..
please help me with a good solution
Click to expand...
Click to collapse
I think was able to solve your connection problem.
http://forum.xda-developers.com/showthread.php?p=47799644#post47799644
best regards
Julian OH8GEJ
I'm experiencing similar problem. I followed the instructions in Odin after bricking my phone via wrong carrier ROM update. I followed these stpes
http://forum.xda-developers.com/showthread.php?t=2261573
I was successful. I also rooted the phone. Yet, I don't see the "install zip from ...." and all recovery apps fail once the phone gets into recovery mode.
Any ideas?
Hi
could someone please send me stock rom for Alcatel pop 4, My phone is stuck on Alcatel logo after installing a theme and i have tried everything but i can't find a rom anywhere on internet.
Thank You
I have the same problem and I can´t find any.
GolpeadorMágico said:
I have the same problem and I can´t find any.
Click to expand...
Click to collapse
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
JordieSnipezHD said:
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
Click to expand...
Click to collapse
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
GolpeadorMágico said:
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
Click to expand...
Click to collapse
I could upload twrp backup if help
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Please, I´m going to try anything for recover it.
GolpeadorMágico said:
Please, I´m going to try anything for recover it.
Click to expand...
Click to collapse
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
Click to expand...
Click to collapse
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
Click to expand...
Click to collapse
I will never buy another there's no development or ROMs nothing I have installed exposed and root
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
I will never buy another there's no development or ROMs nothing I have installed exposed and root
Click to expand...
Click to collapse
Yeah, this mobile sucks. My mom lend me it and its horrible. I lost the system (you know) and the mobile update (Alcatel) don´t do any. I put it, the mobile sometimes its not recognized... No more. Alcatel, not again.
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
zbaracki said:
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
Click to expand...
Click to collapse
Can u get into twrp recovery
mygadgetgeek.com said:
Can u get into twrp recovery
Click to expand...
Click to collapse
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
zbaracki said:
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
Click to expand...
Click to collapse
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Cryonics said:
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Click to expand...
Click to collapse
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
zbaracki said:
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
Click to expand...
Click to collapse
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
bulletbeef said:
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
Click to expand...
Click to collapse
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
zbaracki said:
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
Click to expand...
Click to collapse
i had the same issue searched everywhere and nobody gave good drivers or complete answers not even alcatel themselves, so i figured it out, that's what this community is for
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
Click to expand...
Click to collapse
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
I succesefuly installed the stock rom witout mobile upgrade mobil
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
Click to expand...
Click to collapse
I had the same issue i was unable to install the stock rom using mobile upgrade it will say this is the last firmware there is no new update so i searched the web and i found a solution finaly its callad a software named sugar
what you need is a usb cable a good internet conection and drivers installed
make sure to follow instruction of the software to download
you will find the all instructions on this russian thread https://4pda.ru/forum/index.php?showtopic=675134&st=440#entry46026273
if you need any help just send me a pm
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Removed:
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Can you upload your twrp backup, or at least your stock recovery pleeease? I really need it since this is my work phone and it should be as stock as it came when they check it.
Hi I have a p760 that if I connect to my computer appears and disappears "omap4430" to infinity and if I try to flash through something fastboot says that the partition does not exist. (with omap4boot)
Try again and try again and try again, while partitions will be flashable
Andvelop said:
Try again and try again and try again, while partitions will be flashable
Click to expand...
Click to collapse
Please there are no alternatives? I've been trying for some time and it does not do anything. Perhaps I have not tried for quite some time?
up, I have the same and identical problem, how do I fix?
Up
Up
XRed_CubeX said:
Up
Click to expand...
Click to collapse
Hi, maybe look at 4pda, with a translator, and register for download if necessary. I have an unlocked bootloader and no such problems. Maybe I did not understand your problem correctly, but if the driver simply does not work, then you need to try other drivers, delete old ones, try other programs.
My L9 for an unknown reason stopped working, now when I connect it to the PC with and without battery, OMAP4430 appears and disappears infinitely without stopping, the drivers with W10 are incompatible, in fact I have the dualboot with W7 in VHD, using scripts as OMAP4Boot I am able to have the phone in fastboot but the phone shows that the partitions do not exist, it does not start in any mode only OMAP4430 convertible into Fastboot.
---------- Post added at 06:32 PM ---------- Previous post was at 06:28 PM ----------
P.S:And I don't understand Russian, I don't have a Russian keyboard, I'm Italian, I can't do captcha
I tried a guide on 4pda(https://4pda.ru/forum/index.php?showtopic=310832&view=findpost&p=19622299) but at some point it blocks me at 24% in the flash.
Up
XRed_CubeX said:
My L9 for an unknown reason stopped working, now when I connect it to the PC with and without battery, OMAP4430 appears and disappears infinitely without stopping, the drivers with W10 are incompatible, in fact I have the dualboot with W7 in VHD, using scripts as OMAP4Boot I am able to have the phone in fastboot but the phone shows that the partitions do not exist, it does not start in any mode only OMAP4430 convertible into Fastboot.
---------- Post added at 06:32 PM ---------- Previous post was at 06:28 PM ----------
P.S:And I don't understand Russian, I don't have a Russian keyboard, I'm Italian, I can't do captcha
Click to expand...
Click to collapse
The instructions say that the error should occur, this is normal. This instruction recovers the bootloader only. Maybe now you just need to flash using the LG Flash Tool. Allow another option that your phone could just break, for example, the memory deteriorated, and this is just not fix it.
Does the phone enter sw / upgrade mode? To see, connect the switched off phone with the volume + button pressed to the computer turned on. If it is, find your phone on lg.com, come in support, choose software and firmware, then option 2, Install USB DRIVER, Download and install LG MOBILE SUPPORT TOOL, enter sw / upgrade mode, launch LG MOBILE SUPPORT TOOL Wait for the connection, then select the recovery after the error in the additional options, and wait.
On the site lg.com, if you choose some countries, for example Italy, and others, you cannot find the product p760 or p765, so put the country Russia, in Russia only p765, or Germany, there p760. In USA only p769. Although all the drivers and LG MOBILE SUPPORT TOOL are the same, you can download anywhere.
No, it doesn't work, otherwise I wouldn't have tried it after the flash?
XRed_CubeX said:
No, it doesn't work, otherwise I wouldn't have tried it after the flash?
Click to expand...
Click to collapse
Clear. This phone is already in the past. If you can not find a solution for all forums and topics, then it is probably useless. I did not have such a problem, I unlocked the bootloader, it was that the custom recovery and custom firmware were breaking, and there was a brick, but through fastboot I was reinstalling the recovery again. Yes, there constantly the phone is connected, then disconnected, but after 3-5 times it stops and the recovery is stitched. You need to constantly connect, disconnect the phone, start the process again. You also need to catch the device in Device Manager in order to install the driver. Maybe someone else will help you, but I'm not sure. You have a strange problem if it just happened. Perhaps I have already said that the phone broke, not the software.
webdiman said:
Clear. This phone is already in the past. If you can not find a solution for all forums and topics, then it is probably useless. I did not have such a problem, I unlocked the bootloader, it was that the custom recovery and custom firmware were breaking, and there was a brick, but through fastboot I was reinstalling the recovery again. Yes, there constantly the phone is connected, then disconnected, but after 3-5 times it stops and the recovery is stitched. You need to constantly connect, disconnect the phone, start the process again. You also need to catch the device in Device Manager in order to install the driver. Maybe someone else will help you, but I'm not sure. You have a strange problem if it just happened. Perhaps I have already said that the phone broke, not the software.
Click to expand...
Click to collapse
It tells me that partitions do not exist.
I tried but it connects to me and disconnects indefinitely, so I'm done doing it only 3-5 to me it doesn't work.
XRed_CubeX said:
I tried but it connects to me and disconnects indefinitely, so I'm done doing it only 3-5 to me it doesn't work.
Click to expand...
Click to collapse
If fastboot writes that there are no partitions, then I think that the memory most likely died, otherwise you just have to install different drivers, do it correctly, delete the old ones, reboot, install new ones, try usb 2.0 and 3.0,It may be hampered by the antivirus, try to turn it off during the operation, in general all possible ways Try to disassemble the phone, reconnect all contacts. Try another usb wire, clean the usb contacts on the phone. New will be nothing. Since 2016, no one has done anything for this phone. On 4pda I read about a similar problem, no one was able to solve it, and those who decided, they had another problem. One person suddenly the next day, the phone began to enter the sw / upgrade mode, and the other turns out to be the phone entered this mode, and he thought he had the same problem, then just flashed the firmware.
Perhaps you are not doing the right thing according to the instructions. To put the driver on the omap it is necessary to catch it once, open the installation window manually, and install it, and let the phone itself always turn off and connect, it does not matter. The driver will already stand.
Even when I am fixing the recovery through the fastboot, there is an inscription everything is OK, but the phone does not go into the recovery if you turn it off and clamp the buttons. I am flashing, and I am not disconnecting anything, just waiting for 1-2 minutes, and the phone itself restarts in recovery. I do not know why.
I will try all these tips, but I have to tell you the truth, my phone had 2 identical bricks and the same problem, but at the first, something strange happened, fiddling with the lelus script using key combinations, my phone had entered into S / W upgrade, since I didn't have the flash tool installed, I turned it off, thinking I had solved the problem, trying to turn it on, it made a security error and from then on it was bricked again. The S / W mode was not the strange one without a screen, it was the correct one, I have to try again to make combinations, I had tried the combinations of a guide called: "how to fix partition problem"
---------- Post added at 06:30 AM ---------- Previous post was at 06:28 AM ----------
P.S:But if I can fix it, I'll instantly guide you on what I did to fix it, everyone has to solve this problem. Send me the correct OMAP driver link.
XRed_CubeX said:
I will try all these tips, but I have to tell you the truth, my phone had 2 identical bricks and the same problem, but at the first, something strange happened, fiddling with the lelus script using key combinations, my phone had entered into S / W upgrade, since I didn't have the flash tool installed, I turned it off, thinking I had solved the problem, trying to turn it on, it made a security error and from then on it was bricked again. The S / W mode was not the strange one without a screen, it was the correct one, I have to try again to make combinations, I had tried the combinations of a guide called: "how to fix partition problem"
---------- Post added at 06:30 AM ---------- Previous post was at 06:28 AM ----------
P.S:But if I can fix it, I'll instantly guide you on what I did to fix it, everyone has to solve this problem. Send me the correct OMAP driver link.
Click to expand...
Click to collapse
Here is the most detailed instructions for recovery, but in Russian, I am from Russia, you can translate (4pda.ru/forum/index.php?showtopic=406521&st=7620#entry32936537) If I am mistaken with the instruction, then I'm sorry. There are drivers too. Here on the fastboot, maybe you need something else to install on your computer (https://forum.xda-developers.com/showthread.php?t=2588979) my adb has always been installed a long time ago, maybe that's why it works. I also read such a case. One user did not enter the S / W mode, but he still pressed the volume + and connected to the computer, and the flashtool identified the phone and started updating the firmware.
Here are the official drivers and LG MOBILE SUPPORT TOOL ( lg.com/ru/support/support-mobile/lg-P765 )
1) You may be doing something wrong
2) No one had this problem, no one solved it. You decide.
3) This problem was someone else, he did not talk about it and threw out the phone. Therefore, no one solved it. You decide.
4) The memory of the phone is dead. Nothing you can probably.
5) I hardly know English, I rarely help someone, I was interested in using a translator, thank you, if you at least understand something.
I reiterate that partitions do not exist so I don't think I can delete the boot partition.
I tried the guide but the partitions keep saying that they don't exist, what do I do?