This happens every time I try to run an RUU. EVERY. TIME. The most angering thing I've ever had happen in my life. Someone please help. I have the 1.26.502.15 RUU.
manlavi95 said:
This happens every time I try to run an RUU. EVERY. TIME. The most angering thing I've ever had happen in my life. Someone please help. I have the 1.26.502.15 RUU.
Click to expand...
Click to collapse
the .exe utilities can be finicky,so if you have trouble getting it to run, you can extract "rom.zip" in the following manner:
-start the utility
-check the "i understand" box to move on to the next screen
-hide the utility temporarily out of site
-search your C drive for "rom.zip". you will find it in a temporary location(it will be in a different spot each time you run the utility)
-open the folder location,and transfer rom.zip to a safe location on your PC.
-unhide and cancel the utility,youre done with it.
-rom.zip
Click to expand...
Click to collapse
here are some directions to flash "rom.zip":
Quote:
if youre working with a booted,operational phone,you can flsh the file in the following manner:
-open a cmd window
-change to adb/fastboot directory
cd c:\foldername
(cd c:\mini-adb if youve used any of my guides )
-place the zip file you want to flash into adb/fastboot directory
-enable usb debug,disable fastboot,plug in phone
-check for connectivity
adb devices (should return serial number)
-boot to fastboot
adb reboot bootloader
-check for connectivity again
fastboot devices
-flash the file
fastboot erase cache
fastboto oem rebootRUU (will put you in ruu mode,black screen silver htc letters)
fastboot flash zip zipfilename.zip (will send and flash the file. dont interupt it while the cmd window shows its writinging,and the green status bar is moving on the phone screen)
*sometimes a file will fail with a pre-update error. this is normal,just enter again:
fastboot flash zip zipfilename.zip
and this time it will finish
-when you get "finished" and "OK"
fastboot reboot-bootloader (takes you back to fastboot)
-reboot back to the OS
fastbooot reboot
Click to expand...
Click to collapse
you can use this if you dont have an operational phone as well. you just need to manually put the phone in fastboot(select from hboot menu) then skip the "adb" commands and start with fastboot devices
to answer your other question,yes,you will need to re-unlock and re-install recovery after running the RUU. an ruu is designed as an "unroot" solution, or emergency fix,if other attempts have not made the phone operational.
Thanks go to Scotty85 over at Android forums for this info
http://androidforums.com/t-one-all-things-root/723061-t-ruu-1-26-502-12-a.html#post5864243
clsA said:
here are some directions to flash "rom.zip":
you can use this if you dont have an operational phone as well. you just need to manually put the phone in fastboot(select from hboot menu) then skip the "adb" commands and start with fastboot devices
to answer your other question,yes,you will need to re-unlock and re-install recovery after running the RUU. an ruu is designed as an "unroot" solution, or emergency fix,if other attempts have not made the phone operational.
Thanks go to Scotty85 over at Android forums for this info
http://androidforums.com/t-one-all-things-root/723061-t-ruu-1-26-502-12-a.html#post5864243
Click to expand...
Click to collapse
But will this unroot my device? I'd rather not be rooted or have superuser access at all. I just want everything normal again.
manlavi95 said:
But will this unroot my device? I'd rather not be rooted or have superuser access at all. I just want everything normal again.
Click to expand...
Click to collapse
yes RUU is full factory reset
flashing rom.zip is the same
Sweet, thanks
I may have been vague. This happens before I even get a chance to do anything. Example: I double click the RUU.exe, and it gives me that error. Every. Time.
Download a rom.zip
Sent from my HTC One using Tapatalk 4
clsA said:
Download a rom.zip
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
the .exe RUU tend to mess up alot. Try downloading the ZIP, and flashing it that way.
I can't find a 1.26.502.15 zip. I looked everywhere, they only come in exe. I would have already done it if I could have found one.
manlavi95 said:
I can't find a 1.26.502.15 zip. I looked everywhere, they only come in exe. I would have already done it if I could have found one.
Click to expand...
Click to collapse
Here >> https://mega.co.nz/#!yNQlFJKb!aTXDHQRG0mcv3htWOHjnYxpExjB5dT7HdkuNxCtSVyo
Now can I ask why you want to stay on old Android 4.1.2 when 4.3 is out ?
What do you mean? Does the M7 not update to 4.3 when it's on the stock rom?
manlavi95 said:
What do you mean? Does the M7 not update to 4.3 when it's on the stock rom?
Click to expand...
Click to collapse
4.3 isn't out yet for att. It's still on 4.1
Sent from my HTC One using Tapatalk 4
xcrazydx said:
4.3 isn't out yet for att. It's still on 4.1
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
I'm on AT&T and 4.3
You just need S-Off
Sent from my HTC One using Tapatalk 4
---------- Post added at 06:30 PM ---------- Previous post was at 06:27 PM ----------
manlavi95 said:
What do you mean? Does the M7 not update to 4.3 when it's on the stock rom?
Click to expand...
Click to collapse
Yes if you RUU back to stock you will get the update eventually, no one knows when
Sent from my HTC One using Tapatalk 4
clsA said:
I'm on AT&T and 4.3
You just need S-Off
Sent from my HTC One using Tapatalk 4
---------- Post added at 06:30 PM ---------- Previous post was at 06:27 PM ----------
Yes if you RUU back to stock you will get the update eventually, no one knows when
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
I was explaining to the other guy he won't get 4.3 yet officially on at&t. I'm good.
Sent from my HTC One using Tapatalk 4
Related
OK, so the other night I was trying to restore to stock but I found the RUU giving me errors. I figured it out after hours of tedious work and here it is:
1. Download the latest RUU.
2. Uninstall HTC sync.
3. This is important: go into fastboot mode and using command prompt at the folder where fastboot.exe is stored, type in 'fastboot oem lock' without quotes into the window and press enter.
4. Run the RUU and follow instructions (while still in fastboot usb on phone).
tl;dr for more advanced users: you need to relock the bootloader to get the RUU to work
Hope this helps, peoples.
note: this only applies for hboot 1.5 htc unlocked people
Yup...
10char
THANK YOU!!
is ther anyway i can put the HTC sense back in?? i took it to metropcs store to flash the phone (f**ed it up top to bottom)..lolz but anyways he removed the sense n he made secondary my one n only theme...now its pain in the a$$ to get anything to work..lolz thankx if u can help
Stonko9 said:
is ther anyway i can put the HTC sense back in?? i took it to metropcs store to flash the phone (f**ed it up top to bottom)..lolz but anyways he removed the sense n he made secondary my one n only theme...now its pain in the a$$ to get anything to work..lolz thankx if u can help
Click to expand...
Click to collapse
So are you saying that you have tried to run an ruu and it did not restore the phone....?
an Ruu should definitely work.
Sent from my PG86100 using XDA App
i will definitely try this..................
i have hboot 1.5 and i tried to flash my phone to boost, since i missed something i need to reinstall RUU and do every process again.
and yes i tried to just reinstall RUU it does not work! (tried fastboot usb too!failed)
Now i will try your suggestion jdeoxys
btw will "locking" it makes it unlockable after too????
jdeoxys said:
OK, so the other night I was trying to restore to stock but I found the RUU giving me errors. I figured it out after hours of tedious work and here it is:
1. Download the latest RUU.
2. Uninstall HTC sync.
3. This is important: go into fastboot mode and using command prompt at the folder where fastboot.exe is stored, type in 'fastboot oem lock' without quotes into the window and press enter.
4. Run the RUU and follow instructions (while still in fastboot usb on phone).
tl;dr for more advanced users: you need to relock the bootloader to get the RUU to work
Hope this helps, peoples.
note: this only applies for hboot 1.5 htc unlocked people
Click to expand...
Click to collapse
This is good info! I didint know this. But thank god I dont have to deal with S-ON.
-Scott
Just want to bump this. Need to do this before I send my phone back in.
usb broken
My usb is not working i can only charge so i can not get into fast boot is there anything else i can do before i waste 100$o on insurance claim i will paypal donate 20$ to anyone who can help
i need direct link to latest ruu help pls.
aiua said:
i need direct link to latest ruu help pls.
Click to expand...
Click to collapse
Bump. Looking for RUU as well. Not the pg86img file but the ruu. I got this from ppc geeks http://forum.ppcgeeks.com/2154352-post28.html but the ruu is not available to free users.
Download the ruu. Find it in your phone and rename it pg86img. Now reboot into your hboot and wah lah. Your phone is back to stock
Sent from my blazing fast 3d using xda premium
Danger Dan said:
Download the ruu. Find it in your phone and rename it pg86img. Now reboot into your hboot and wah lah. Your phone is back to stock
Sent from my blazing fast 3d using xda premium
Click to expand...
Click to collapse
Download it from.......
I'm looking for the RUU the exe file you run on your computer not the zip file for sd flash.
Oh sorry. You can find it on Google if you search hard.
Sent from my blazing fast 3d using xda premium
I thought on hboot 1.5 the pgm.zip file or whatever its called won't work. I am trying to go back to stock. i relocked boot loader but cannot for the life of me figure out how to run the ruu.zip.. that's all i keep reading ... can someone explain exactly HOW to run a zip file? i'm on hboot 1.5, evo 3d, relocked.
Lady1178 said:
I thought on hboot 1.5 the pgm.zip file or whatever its called won't work. I am trying to go back to stock. i relocked boot loader but cannot for the life of me figure out how to run the ruu.zip.. that's all i keep reading ... can someone explain exactly HOW to run a zip file? i'm on hboot 1.5, evo 3d, relocked.
Click to expand...
Click to collapse
If you have already downloaded the exe to your pc then just plug your phone into your pc. If you phone is powered on just choose charge only from your pull down screen or when the usb window pops up. Then locate the .exe-ruu you downloaded to your pc and double click on it to run it and follow the instructions and you should be good. If you phone is powered off plug it into your pc. Then hold the volume up button and press power and and the fasboot menu should appear and it should state "fastboot usb" at the top. Then once again repeat the steps above once you located the .exe-ruu on you pc. Also make sure you have the correct ruu. Hope this helps.
Locked & Loaded
""shooter on Deck""
First thank you for your quick response... so i downloaded the RUU.ZIP file, do i need to download RUU.EXE instead? This is whats confusing me because i'm searching and cannot find ruu.exe file. Thanks!
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
nevermind i think i may have found one.
Lady1178 said:
First thank you for your quick response... so i downloaded the RUU.ZIP file, do i need to download RUU.EXE instead? This is whats confusing me because i'm searching and cannot find ruu.exe file. Thanks!
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
nevermind i think i may have found one.
Click to expand...
Click to collapse
Lol I'm glad you found one. Also yes you should be looking for an .exe.ruu which means that you have to run it from your pc. The zip file is for flashing the ruu threw fastboot. Hope all works out. Pm me if you need any assistance. Good luck.
Locked & Loaded
""shooter on Deck""
Asked and answered.
Lady1178 said:
First thank you for your quick response... so i downloaded the RUU.ZIP file, do i need to download RUU.EXE instead? This is whats confusing me because i'm searching and cannot find ruu.exe file. Thanks!
---------- Post added at 01:15 AM ---------- Previous post was at 01:11 AM ----------
nevermind i think i may have found one.
Click to expand...
Click to collapse
Do you know what RUU means? Obviously not, because you wouldn't be asking this question.
Odoslané z môjho HTC EVO 3D X515m cez Tapatalk
hi guys im a total noob bought a droid dna on craigslist that was rooted. i tried to set back to stock with ruu got message error 158. i then tried hboot method and when i put cmd fastboot oem writeflagsecure 3 my phone now says tampered ,relocked, security warning and when you reboot just keeps going to fast boot menu.again im new to this and dont know what im doing so maybe i shouldnt have dabbled with it...ill attach a pic of the screen its a red employee edition droid dna... thanks for any help you can offer
Leave it alone! Go to recovery and delete data and reboot the phone.
Sent from my HTC6435LVW using XDA Premium HD app
ifi try recovery or anything just brings me back to the same screen
worm1977 said:
hi guys im a total noob bought a droid dna on craigslist that was rooted. i tried to set back to stock with ruu got message error 158. i then tried hboot method and when i put cmd fastboot oem writeflagsecure 3 my phone now says tampered ,relocked, security warning and when you reboot just keeps going to fast boot menu.again im new to this and dont know what im doing so maybe i shouldnt have dabbled with it...ill attach a pic of the screen its a red employee edition droid dna... thanks for any help you can offer
Click to expand...
Click to collapse
Did you know if it had an Engineer's HBOOT before? Writeflagsecure 3 is to remove S-OFF. You didn't need to do that to go stock.
Try flashing a recovery?
If this for insurance purposes? Just wondering what you're trying to do with your phone since it was working when you got it.
karn101 said:
Did you know if it had an Engineer's HBOOT before? Writeflagsecure 3 is to remove S-OFF. You didn't need to do that to go stock.
Try flashing a recovery?
If this for insurance purposes? Just wondering what you're trying to do with your phone since it was working when you got it.
Click to expand...
Click to collapse
i think i tried to flash recovery. i just want to get it to work so i can use it or sell it. when it poered up normally it had the red writing on the bottom that said for htc developer purposes also instead of the dna boot up it said htc one
worm1977 said:
i think i tried to flash recovery.
Click to expand...
Click to collapse
That isn't a good sign. What steps did you take to flash a recovery?
karn101 said:
That isn't a good sign. What steps did you take to flash a recovery?
Click to expand...
Click to collapse
tried recovery then reboot on phone just takes me to the same screen. also believe i tried fastboot-flash recovery
worm1977 said:
tried recovery then reboot on phone just takes me to the same screen. also believe i tried fastboot-flash recovery
Click to expand...
Click to collapse
No offense, but you keep saying things like "i think" or I "believe"; if you want our help, we need to know if you did it or not.
What recovery were you flashing?
Basically, what I'm saying is you might have deleted your recovery since you're saying that you keep ending up on the bootloader. You need to flash a recovery into your phone. If this doesn't make sense, just let me know and I'll point you in the right direction.
EDIT:
Follow these directions and then select RECOVERY from your bootloader. Let us know what happens please.
http://forum.xda-developers.com/showthread.php?t=1994662
karn101 said:
No offense, but you keep saying things like "i think" or I "believe"; if you want our help, we need to know if you did it or not.
What recovery were you flashing?
Basically, what I'm saying is you might have deleted your recovery since you're saying that you keep ending up on the bootloader. You need to flash a recovery into your phone. If this doesn't make sense, just let me know and I'll point you in the right direction.
Click to expand...
Click to collapse
It had clock work mod on it.no offense taken im just new to this and its kind if confusing to me.since it wouldnt boot thru ruu thats when I tried the hboot method.i dont quite understand the cmd's and flashing I guess.
karn101 said:
No offense, but you keep saying things like "i think" or I "believe"; if you want our help, we need to know if you did it or not.
What recovery were you flashing?
Basically, what I'm saying is you might have deleted your recovery since you're saying that you keep ending up on the bootloader. You need to flash a recovery into your phone. If this doesn't make sense, just let me know and I'll point you in the right direction.
EDIT:
Follow these directions and then select RECOVERY from your bootloader. Let us know what happens please.
http://forum.xda-developers.com/showthread.php?t=1994662
Click to expand...
Click to collapse
ok after i download do i just try to flash thru the adb commands?
worm1977 said:
It had clock work mod on it.no offense taken im just new to this and its kind if confusing to me.since it wouldnt boot thru ruu thats when I tried the hboot method.i dont quite understand the cmd's and flashing I guess.
Click to expand...
Click to collapse
I hear you, it can be overwhelming at first. I've been flashing since the WM 6.5 days and still don't know as much as some of the people here!
When you select RECOVERY, it's bringing you back to the BOOTLOADER screen, right?
If that's the case, the RECOVERY may have been removed, which is why I'm saying to flash a new one in. Did you follow the instructions on that thread I linked to?
---------- Post added at 04:04 AM ---------- Previous post was at 03:53 AM ----------
worm1977 said:
ok after i download do i just try to flash thru the adb commands?
Click to expand...
Click to collapse
Just saw this. No, you should be using fastboot commands, not ADB
fastboot flash recovery recovery.img
To begin, do you have the Android SDK installed on your computer? (Platform Tools)
You save the TWRP .img file in that folder.
Shift+Right Click on the folder and click Open Command Prompt Here
The phone should be connected to the PC
From the BOOTLOADER, go to FASTBOOT
It should say FASTBOOT USB
You can double check by typing 'fastboot devices'
Then run 'fastboot flash recovery recovery.img'
recovery.img will be named whatever your TWRP file is named
Then for good measure do 'fastboot reboot'
Now, you should be back in BOOTLOADER
Go to RECOVERY, and what do you see?
karn101 said:
I hear you, it can be overwhelming at first. I've been flashing since the WM 6.5 days and still don't know as much as some of the people here!
When you select RECOVERY, it's bringing you back to the BOOTLOADER screen, right?
If that's the case, the RECOVERY may have been removed, which is why I'm saying to flash a new one in. Did you follow the instructions on that thread I linked to?
---------- Post added at 04:04 AM ---------- Previous post was at 03:53 AM ----------
Just saw this. No, you should be using fastboot commands, not ADB
fastboot flash recovery recovery.img
yeah fastboot sorry. im at work now ill try it when i get home in 2 hours i have the sdk downloaded
To begin, do you have the Android SDK installed on your computer? (Platform Tools)
You save the TWRP .img file in that folder.
Shift+Right Click on the folder and click Open Command Prompt Here
The phone should be connected to the PC
From the BOOTLOADER, go to FASTBOOT
It should say FASTBOOT USB
You can double check by typing 'fastboot devices'
Then run 'fastboot flash recovery recovery.img'
recovery.img will be named whatever your TWRP file is named
Then for good measure do 'fastboot reboot'
Now, you should be back in BOOTLOADER
Go to RECOVERY, and what do you see?
Click to expand...
Click to collapse
i get home in 2 hours ill try then. i have sdk installed and was using fastboot commands
worm1977 said:
i get home in 2 hours ill try then. i have sdk installed and was using fastboot commands
Click to expand...
Click to collapse
Cool. Same here. I work 2300-0700 hours.
karn101 said:
Cool. Same here. I work 2300-0700 hours.
Click to expand...
Click to collapse
down loaded that goo manager tried fastboot flash recovery GooManager_2.1.2.img said unknown error cant load GooManager
worm1977 said:
down loaded that goo manager tried fastboot flash recovery GooManager_2.1.2.img said unknown error cant load GooManager
Click to expand...
Click to collapse
You need to flash a recovery twrp is probably the best one. Goomanager is a app use to download and install ROMs.
Sent from my HTC6435LVW using Tapatalk 2
coachcrey said:
You need to flash a recovery twrp is probably the best one. Goomanager is a app use to download and install ROMs.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
What he said ^^
Here are the direct links.
http://techerrata.com/browse/twrp2/dlx
I'd suggest downloading 2.5 as 2.6 gave me issues.
karn101 said:
What he said ^^
Here are the direct links.
http://techerrata.com/browse/twrp2/dlx
I'd suggest downloading 2.5 as 2.6 gave me issues.
Click to expand...
Click to collapse
I've had no problems with 2.6 personally but either one will work. Once your in
Recovery you can download a ROM on your computer and on adb use.
adb push "C:\Documents and Settings\Josh\My Documents\Downloads\ViperDNA_1.3.5.zip" sdcard
Clearly that's how I would do it via my computer after you type adb push you can hit the space bar and drag the file to the command prompt and drop it there that will do the dirty work lol then you just hit space and tell it to install on the sdcard.
Dont let your phone or computer go to sleep or the push will corrupt the file it can take up to 10 mins to transfer the file and once you hit enter it won't acknowledge its actually transferring Dont worry it is. It will tell you when its done how long it took and how much it transfered. After that you can flash the ROM and you should be golden man!
Sent from my HTC6435LVW using Tapatalk 2
coachcrey said:
I've had no problems with 2.6 personally but either one will work. Once your in
Recovery you can download a ROM on your computer and on adb use.
adb push "C:\Documents and Settings\Josh\My Documents\Downloads\ViperDNA_1.3.5.zip" sdcard
Clearly that's how I would do it via my computer after you type adb push you can hit the space bar and drag the file to the command prompt and drop it there that will do the dirty work lol then you just hit space and tell it to install on the sdcard.
Dont let your phone or computer go to sleep or the push will corrupt the file it can take up to 10 mins to transfer the file and once you hit enter it won't acknowledge its actually transferring Dont worry it is. It will tell you when its done how long it took and how much it transfered. After that you can flash the ROM and you should be golden man!
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
thanks guys im going to try it when i get home in the morning...lol i got alot to learn!!
worm1977 said:
thanks guys im going to try it when i get home in the morning...lol i got alot to learn!!
Click to expand...
Click to collapse
Not a problem man I hope this helped let me know if your still having issues I'm no dev but I have gathered a plethora of knowledge over the years playing with stuff.
Sent from my HTC6435LVW using Tapatalk 2
@worm1977 any luck man?
Sent from my HTC6435LVW using Tapatalk 2
So I bought an Evo 3D from a friend, he said he played with it quite a bit. Wifi (says error) and cell data is not working, haven't tried Bluetooth. Phone is supposedly from Rogers, so I'm trying to reflash the stock ICS rom that was linked from this site.
First off, the recovery wasn't doing anything, so I flashed cwm-4.0.1.4-shooteru. Now I've got a recovery at least.
Phone refuses to flash either
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262715_signed (obtained from the repository)
also tried to run the .exe version. The flash through CWM says Image Verification Failed or (bad), depends if I get it to actually check the signature. I have redownloaded and tried again with no success.
Hell, even the OTA update doesn't work, says the phone has been tampered with (duh).
Here's what my HBOOT says:
Code:
*** UNLOCKED ***
SHOOTER_U PVT SHIP S-OFF RL
RADIO-10.13.9020.08_2M
eMMC-boot
Jul 12 2011, 15:29:51
I have no idea how he obtained S-OFF or did the unlock, and I have no idea of the phone has the stock radio/software/anything. All I want to do is use the stock ICS rom from Rogers, as I'm lending this phone from a friend. I'm hoping the wifi and cell data will be fixed with proper software.
if your using the zip file then you need to rename it to PG86IMG.zip and place it on the root of your sdcard. then boot into bootloader and accept the update.
if this doesnt work then relock the bootloader and then try running exe version from your pc.
btw what is your hboot?
EM|NEM said:
if your using the zip file then you need to rename it to PG86IMG.zip and place it on the root of your sdcard. then boot into bootloader and accept the update.
if this doesnt work then relock the bootloader and then try running exe version from your pc.
btw what is your hboot?
Click to expand...
Click to collapse
Trying to PG86IMG.zip autoload, also my HBOOT is HBOOT-1.49.0007. Will get back to you when I'm done trying these steps.
zeropaladn said:
Trying to PG86IMG.zip autoload, also my HBOOT is HBOOT-1.49.0007. Will get back to you when I'm done trying these steps.
Click to expand...
Click to collapse
Sooo, it started to update everything with the PG86IMG (i renamed the ICS SHOOTERU rom mentioned above) and about halfway through updating various things it powered off. It won't boot now, it gets stuck in a reboot loop, but I can still get into recovery and HBOOT. Going to try the exe while it's in HBOOT, see if that works (since I can't get the phone to fully power on.)
EDIT: So, since it's stuck in the bootloop now, I can't get the S-ON done. The RUU won't detect the phone now, either. (ERROR[170]: USB CONNECTION ERROR.
So I think I may have just bricked my phone.
Rerun the PG86IMG.zip
Sent from my PC36100 using xda app-developers app
jlmancuso said:
Rerun the PG86IMG.zip
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Re-ran the PG86IMG.zip, CID is incorrect, the update failed. Do I have the incorrect ROM, or was the file I downloaded bad?
Not exactly sure. I am on a CDMA but most times I have to run the zip twice. Make sure you have downloaded the latest version. Also most sites post md5sums so you can check to make sure the download is correct.
Sent from my PC36100 using xda app-developers app
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
The file was a zip or exe?
Sent from my PC36100 using xda app-developers app
jlmancuso said:
Not exactly sure. I am on a CDMA but most times I have to run the zip twice. Make sure you have downloaded the latest version. Also most sites post md5sums so you can check to make sure the download is correct.
Sent from my PC36100 using xda app-developers app
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
The file was a zip or exe?
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
I've MD5 checked both the Rogers Gingerbread and ICS ROMs from http://www.androidruu.com/index.php?developer=Shooter, they're good. Both get checked then tell me the CID incorrect!!! error. The radio currently installed matches the Gingerbread (WWE) ROM, but that's the first one I've tried (3 times each, just to be sure after reading above. Also, I am using the .zip files, the .exe files are the ones you run on your computer, right? (If I'm using the wrong files I'll be so pissed.)
Yes zip is for sdcard and exe for PC. Was the phone unlocked (htcdev or s-off) before?
Just reread your op. Got an idea but I have to find the files. You can still get into recovery right?
Could not find zip files right away but here is a thread with more info. Should have the zips in it.
http://forum.xda-developers.com/showthread.php?t=1970252
The zip locks bootloader so you can run the pg86img. I forgot that it has to be locked because I use custom hboots that are locked but don't show **locked** or **relocked**.
Sent from my PC36100 using xda app-developers app
Any luck?
Sent from my PC36100 using xda app-developers app
jlmancuso said:
Any luck?
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
Just checked back now, lots of technical stuff that's beyond my knowledge scope, but I did find the zip you referenced. I can still get into cmw so I should be able to do this, ill edit this post when I have results (or not XD)
EDIT: Bootloader is now ***RELOCKED***, after running the query then the relock, now trying the PG86IMG.zip again.
EDIT2: CID is still incorrect. Going to see if I can hit the ***LOCKED*** status instead of ***RELOCKED***, see if that makes a difference.
EDIT3: CID is still incorrect. Must I have the wrong image?
maybe the phone isnt rogers. try an European RUU
---------- Post added at 08:18 PM ---------- Previous post was at 08:15 PM ----------
and if you just aren't able to run a RUU then just flash a stock rom in recovery. you might also have to update your firmware. put on root of sdcard, boot into bootloader and accept update
What CID has the phone actually got right now? (in fastboot, type "fastboot oem readcid").
emulsification said:
What CID has the phone actually got right now? (in fastboot, type "fastboot oem readcid").
Click to expand...
Click to collapse
I've tried fastboot to query the device if it won't boot. I've tried doing many other things with fastboot and it just says <waiting for device>.
zeropaladn said:
I've tried fastboot to query the device if it won't boot. I've tried doing many other things with fastboot and it just says <waiting for device>.
Click to expand...
Click to collapse
Are you sure that the bootloader says "Fastboot USB"?
When you boot the phone into the bootlader, you have to choose the "fastboot" option (select by pressing the power button). It will go into fastboot mode (and display "Fastboot"). Then, when you connect your phone to your PC via USB cable, it should connect to your computer (assuming you have the HTC drivers installed), and "Fastboot" will turn into "Fastboot USB".
Then in the command prompt on your PC, type "fastboot devices". If your phone is detected, it'll show you it's serial number.
You can also verify it's connected by checking Device Manager on your computer.
in case you dont have the latest drivers installed, I suggest you do that first.
emulsification said:
Are you sure that the bootloader says "Fastboot USB"?
When you boot the phone into the bootlader, you have to choose the "fastboot" option (select by pressing the power button). It will go into fastboot mode (and display "Fastboot"). Then, when you connect your phone to your PC via USB cable, it should connect to your computer (assuming you have the HTC drivers installed), and "Fastboot" will turn into "Fastboot USB".
Then in the command prompt on your PC, type "fastboot devices". If your phone is detected, it'll show you it's serial number.
You can also verify it's connected by checking Device Manager on your computer.
Click to expand...
Click to collapse
Bah, I wasn't going into fastboot menu in the bootloader. Go me. It says HTC__001, which means it should be taking anything I throw at it.
EDIT: Changed the CID to ROGER001, the CID for Rogers devices using this information:
http://htcevohacks.com/htc-evo-3d-hacks/how-to-change-cid-on-rooted-htc-evo-3d-gsm/
Threw the RUU at it, worked like a charm! I have a Rogers ICS HTC Evo 3D now! YAY!
Thanks for everyone!
EDIT2: Wi-fi still doesn't work... Probably a hardware issue at this point.
zeropaladn said:
Bah, I wasn't going into fastboot menu in the bootloader. Go me. It says HTC__001, which means it should be taking anything I throw at it.
EDIT: Changed the CID to ROGER001, the CID for Rogers devices using this information:
http://htcevohacks.com/htc-evo-3d-hacks/how-to-change-cid-on-rooted-htc-evo-3d-gsm/
Threw the RUU at it, worked like a charm! I have a Rogers ICS HTC Evo 3D now! YAY!
Thanks for everyone!
EDIT2: Wi-fi still doesn't work... Probably a hardware issue at this point.
Click to expand...
Click to collapse
Glad you got it. Try a couple custom roms and you might get WiFi if your lucky.
Sent from my PC36100 using xda app-developers app
Whoo! Congrats. :highfive:
jlmancuso said:
Glad you got it. Try a couple custom roms and you might get WiFi if your lucky.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
I agree - WiFi is one of the most integral and most used features of a smartphone. Would be good if you can get it working.
So...I was showing someone at work today how to install custom recovery in goomanager. I wasn't paying attention, went to far & it started to download twrp. I was running a newer version 2.6.3.0 so I tried to cancel the download. Well, that's when my problem started. I rebooted my phone into recovery so I could show him what twrp could do & it was gone. The phone would boot to the splash screen & hang for a few. It would then reboot again back to the splash screen & continue until the phone was back up & running. If I reboot into the bootloader it still says I'm unlocked & s-off. I'm also still rooted. I've tried all the options...fastboot, terminal emulator/adb shell, the PJ75IMG.zip in bootloader, & again thru goomanager. I just can't get it to reinstall. Everything else on the phone works fine. I can connect to my cpu & view all the files on internal storage & the sd card. I'm running Meanbean on hboot 1.19 & baseband 1.12.11.1210.
So what are my options??? I'm not above doing a complete factory reset if needed. Obviously, I'd like to do this without having to start over from scratch if possible.
TIA
buddahj said:
So...I was showing someone at work today how to install custom recovery in goomanager. I wasn't paying attention, went to far & it started to download twrp. I was running a newer version 2.6.3.0 so I tried to cancel the download. Well, that's when my problem started. I rebooted my phone into recovery so I could show him what twrp could do & it was gone. The phone would boot to the splash screen & hang for a few. It would then reboot again back to the splash screen & continue until the phone was back up & running. If I reboot into the bootloader it still says I'm unlocked & s-off. I'm also still rooted. I've tried all the options...fastboot, terminal emulator/adb shell, the PJ75IMG.zip in bootloader, & again thru goomanager. I just can't get it to reinstall. Everything else on the phone works fine. I can connect to my cpu & view all the files on internal storage & the sd card. I'm running Meanbean on hboot 1.19 & baseband 1.12.11.1210.
So what are my options??? I'm not above doing a complete factory reset if needed. Obviously, I'd like to do this without having to start over from scratch if possible.
TIA
Click to expand...
Click to collapse
Open a cmd window from your PC>platform tools folder
Boot into bootloader>fastbootusb
Type fastboot erase cache
Re-Flash twrp > fastboot flash recovery recoverymane.img
Hopefully that will fix your issue
BD619 said:
Open a cmd window from your PC>platform tools folder
Boot into bootloader>fastbootusb
Type fastboot erase cache
Re-Flash twrp > fastboot flash recovery recoverymane.img
Hopefully that will fix your issue
Click to expand...
Click to collapse
I tried it & unfortunately it didn't work. It's still doing the same thing.
After typing in the command: fastboot erase cache
erasing 'cache'...
OKAY [ 0.109s]
finished. total time: 0.109s
After typing in the command: fastboot flash recovery recovery.img
error: cannot load recovery.img' : Unknown error
buddahj said:
I tried it & unfortunately it didn't work. It's still doing the same thing.
After typing in the command: fastboot erase cache
erasing 'cache'...
OKAY [ 0.109s]
finished. total time: 0.109s
After typing in the command: fastboot flash recovery recovery.img
error: cannot load recovery.img' : Unknown error
Click to expand...
Click to collapse
Is the recovery.img file in the folder you are using to run the commands?
BD619 said:
Is the recovery.img file in the folder you are using to run the commands?
Click to expand...
Click to collapse
Yes, it's in the platform-tools folder.
Something else that just happened. I went into Nandroid Manager to see if it would say what recovery I'm running...if any. It said: Detected Recovery: Unknown Click to fix! When I clicked it I got this message.
"It looks like the file last_log at /cache/recovery/last_log does not exist! This file is required to detect installed recovery. To fix this problem please reboot into your recovery then reboot back to system!
What about flashing recovery via Nandroid Manager? I'm a little reluctant to do this since they warn it can brick your phone.
Odd. If you can't get recovery reinstalled I would RUU and go from there. You can use the 3.17 RUU and you'll retain S-off. You'll need to unlock your bootloader, install recovery and flash a ROM once it completes. Might be your best option.
Sent from my HTC EVO 4G LTE
buddahj said:
Yes, it's in the platform-tools folder.
Something else that just happened. I went into Nandroid Manager to see if it would say what recovery I'm running...if any. It said: Detected Recovery: Unknown Click to fix! When I clicked it I got this message.
"It looks like the file last_log at /cache/recovery/last_log does not exist! This file is required to detect installed recovery. To fix this problem please reboot into your recovery then reboot back to system!
What about flashing recovery via Nandroid Manager? I'm a little reluctant to do this since they warn it can brick your phone.
Click to expand...
Click to collapse
I have never heard of Nandroid Manager so can't really answer.
Are you sure everything is spelled correctly in the command?
FinZ28 said:
Odd. If you can't get recovery reinstalled I would RUU and go from there. You can use the 3.17 RUU and you'll retain S-off. You'll need to unlock your bootloader, install recovery and flash a ROM once it completes. Might be your best option.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
If I RUU, what's my best option for unlocking the bootloader? Can you still use HTC dev?
BD619 said:
Are you sure everything is spelled correctly in the command?
Click to expand...
Click to collapse
yes
buddahj said:
If I RUU, what's my best option for unlocking the bootloader? Can you still use HTC dev?
Click to expand...
Click to collapse
Yep.
Sent from my HTC EVO 4G LTE
If I use the 3.17 RUU will it change my hboot? Not that it matters, just curious. You don't happen to have a link for the 3.17 ruu do you? Any thoughts on the viperuu?
buddahj said:
If I use the 3.17 RUU will it change my hboot? Not that it matters, just curious. You don't happen to have a link for the 3.17 ruu do you? Any thoughts on the viperuu?
Click to expand...
Click to collapse
Yep, you'll have the newest Hboot. Doesn't really matter since you're S-off. Hit the top link in my sig and go to the bottom of the first post.
Sent from my HTC EVO 4G LTE
buddahj said:
If I use the 3.17 RUU will it change my hboot? Not that it matters, just curious. You don't happen to have a link for the 3.17 ruu do you? Any thoughts on the viperuu?
Click to expand...
Click to collapse
http://www.htc.com/us/support/htc-evo-4g-lte-sprint/news/
Same hboot as far as I know.
If you are running Moonshine or Rumrunner hboot it may overwrite it but you can just re-flash the hboot again
:good::good: Thanks for the help guys. This looks like something I'll tackle on my next day off. Lol, the way my luck's been running lately this may not go as smoothly as it should.
FinZ28 said:
Yep, you'll have the newest Hboot. Doesn't really matter since you're S-off. Hit the top link in my sig and go to the bottom of the first post.
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
He's on 1.19 so it'll update to 2.09. As far as VipeRUU, I don't have an opinion on it. I've used it previously on a phone that had a borked recovery partition and it worked just fine. It's really a matter of personal preference.
Sent from my HTC EVO 4G LTE
---------- Post added at 08:19 PM ---------- Previous post was at 08:16 PM ----------
buddahj said:
:good::good: Thanks for the help guys. This looks like something I'll tackle on my next day off. Lol, the way my luck's been running lately this may not go as smoothly as it should.
Click to expand...
Click to collapse
I ran the 3.17 RUU on my phone the other night just for the heck of it. It takes about ten minutes from start to finish but it's pretty painless.
Sent from my HTC EVO 4G LTE
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
Just curious. When you were showing how to install recovery, how did you go about doing it?
Sent from my HTC EVO 4G LTE
FinZ28 said:
He's on 1.19 so it'll update to 2.09. As far as VipeRUU, I don't have an opinion on it. I've used it previously on a phone that had a borked recovery partition and it worked just fine. It's really a matter of personal preference.
Sent from my HTC EVO 4G LTE
Just curious. When you were showing how to install recovery, how did you go about doing it?
Sent from my HTC EVO 4G LTE
Click to expand...
Click to collapse
I was in the goomanager app showing him how you could use it to install open script recovery & accidentally started to download it.
I tried to run the 3.17 Ruu & got an error [158]: image error
It says: The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility & try again.
buddahj said:
I tried to run the 3.17 Ruu & got an error [158]: image error
It says: The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility & try again.
Click to expand...
Click to collapse
Try a different USB port USB2 work the best
BD619 said:
Try a different USB port USB2 work the best
Click to expand...
Click to collapse
I am using USB 2.0. I'll try on my laptop later & update then.
I ended up running the viperuu. I'm now back to being unlocked/rooted with twrp. What a pain in my arse.
Thanks again guys!!!
I can't find a RUU for my HTC ONE MAX by Sprint. It has to have "t6spr" or " t6whl" to work on my phone. If not an RUU; then what else to use and instructions on how to accomplish the task. I'm currently running 3.02.651.5 and an older RUU is not working(1.16.651.4)...will not overwrite latest update.
Currently positioned at bootloader....os is wiped, lost "recovey" and my computer doesn't see my device. Haven't found a way to go forward to unlock bootloader or go back to stock.
HELP! I NEED SOMEBODY!....Desperate.
BlackSuperman69 said:
I can't find a RUU for my HTC ONE MAX by Sprint. It has to have "t6spr" or " t6whl" to work on my phone. If not an RUU; then what else to use and instructions on how to accomplish the task. I'm currently running 3.02.651.5 and an older RUU is not working(1.16.651.4)...will not overwrite latest update.
Currently positioned at bootloader....os is wiped, lost "recovey" and my computer doesn't see my device. Haven't found a way to go forward to unlock bootloader or go back to stock.
HELP! I NEED SOMEBODY!....Desperate.
Click to expand...
Click to collapse
Are you S-OFF or S-ON?
same
s-on. I have backups on external sd card, but because I can't even fastboot from my pc; I can't install one.
BlackSuperman69 said:
s-on. I have backups on external sd card, but because I can't even fastboot from my pc; I can't install one.
Click to expand...
Click to collapse
No Chance.
You are not able to downgrade the ROM or the Hboot or whatever if you have S-ON.
This is one of the most reasons why I will have an S-OFF device. You can't do nothing with it. Use it. Or throw it out of the Windows. Or sometimes take a call.
But that's it.
---------- Post added at 05:53 PM ---------- Previous post was at 05:49 PM ----------
Ohhhh... I see you have a bigger problem with your device.
No panik. the device is still alive. I need to know:
1. Which OS you are using?
Win7, Win8 or LINUX
same
MrT69 said:
No Chance.
You are not able to downgrade the ROM or the Hboot or whatever if you have S-ON.
This is one of the most reasons why I will have an S-OFF device. You can't do nothing with it. Use it. Or throw it out of the Windows. Or sometimes take a call.
But that's it.
---------- Post added at 05:53 PM ---------- Previous post was at 05:49 PM ----------
Ohhhh... I see you have a bigger problem with your device.
No panik. the device is still alive. I need to know:
1. Which OS you are using?
Win7, Win8 or LINUX
Click to expand...
Click to collapse
Win 7.
1. Download my "HTC OneMax - S-OFF Package" here:
http://ul.to/gqwmbc08
Click to expand...
Click to collapse
2. Unpack the package
3. Uninstall EVERYTHING related HTC Driver or HTC Manager on your Win7 machine. You can keep your Windows installed
4. Reboot
5. Install the HTC_Driver_4.1.0.001.exe (My Package - Driver Folder) and reboot
6. Install the USB3.0 driver - cross the fingers you have a Intel Based device No clue about AMD
7. Download the Sprint 3.02.615 Repair Package here:
http://ul.to/lcdltgd0
Click to expand...
Click to collapse
8. Extract the folder and run the ARUWizard.exe
This will flash default hboot, recovery and boot. It will also repair some things on your device if they are broken. This will mean your device is back again with default things.
Click to expand...
Click to collapse
9. Went back to my "HTC OneMax - S-OFF Package"
10. Copy your Unlocktoken.bin and a recovery.img into this folder. Use this fastboot and flash your Unlocktoken. Don't use your's fastboot!
fastboot flash unlocktoken Unlocktoken.bin
Click to expand...
Click to collapse
11. Flash CWR/TWRP recovery of your choice
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
and then
fastboot erase cache
Click to expand...
Click to collapse
12. Now you are ready to flash your recovery back to your device
repair package...can't get
MrT69 said:
1. Download my "HTC OneMax - S-OFF Package" here:
2. Unpack the package
3. Uninstall EVERYTHING related HTC Driver or HTC Manager on your Win7 machine. You can keep your Windows installed
4. Reboot
5. Install the HTC_Driver_4.1.0.001.exe (My Package - Driver Folder) and reboot
6. Install the USB3.0 driver - cross the fingers you have a Intel Based device No clue about AMD
7. Download the Sprint 3.02.615 Repair Package here:
8. Extract the folder and run the ARUWizard.exe
9. Went back to my "HTC OneMax - S-OFF Package"
10. Copy your Unlocktoken.bin and a recovery.img into this folder. Use this fastboot and flash your Unlocktoken. Don't use your's fastboot!
11. Flash CWR/TWRP recovery of your choice
and then
12. Now you are ready to flash your recovery back to your device
Click to expand...
Click to collapse
I can't get the Sprint repair package from that site....The language is Swiss and they want me to sign up.
Repair Kit
BlackSuperman69 said:
I can't get the Sprint repair package from that site....The language is Swiss and they want me to sign up.
Click to expand...
Click to collapse
I now have it. Proceeding to phase two!
I'm stuck
I need to get back to stock to replace phone. I don't understand how to flash "0P3IMG" zip files to get back to stock. I was hoping to go s-off to run a downgraded RUU back to stock; but Rumrunner isn't working for me either. Don't know what to do next.......
BlackSuperman69 said:
I need to get back to stock to replace phone. I don't understand how to flash "0P3IMG" zip files to get back to stock. I was hoping to go s-off to run a downgraded RUU back to stock; but Rumrunner isn't working for me either. Don't know what to do next.......
Click to expand...
Click to collapse
Are you already S-OFF?
Sent from my HTC One max using XDA Free mobile app
Well I take no responsibility for what you do or what happens, but here's the ruu for 4.3 that I saved when I almost bricked my phone https://www.dropbox.com/s/ggaw261oo..._NV_SPCS_4.54_003_release_340074_signed_2.exe
MrT69 said:
Are you already S-OFF?
Sent from my HTC One max using XDA Free mobile app
Click to expand...
Click to collapse
For the last two and a half days ,I have been trying to get back to factory; to no avail. The process was a great learning experience about many different tools and people who provide great support to those like myself.
I want to thank "Mr.T69" for his help....I really can't thank you enough for the "Fix" you provided for me.
Short synopsis: I got up and running but found that "revone" or "Rumrunner" wouldn't work for me because many roms have made them outdated. So tried as I have, I could not get S-Off. The RUU I had was too old also and I did not know how to flash "0P3PIMG" or "OTA" type files; couldn't find any directions.
The saddest part of this was to find the lack of support out there for my Sprint HTC One Max; as far as RUU's and the like.... We who have them are on an island by ourselves.
Blah
Blah blah
BlackSuperman69 said:
For the last two and a half days ,I have been trying to get back to factory; to no avail. The process was a great learning experience about many different tools and people who provide great support to those like myself.
I want to thank "Mr.T69" for his help....I really can't thank you enough for the "Fix" you provided for me.
Short synopsis: I got up and running but found that "revone" or "Rumrunner" wouldn't work for me because many roms have made them outdated. So tried as I have, I could not get S-Off. The RUU I had was too old also and I did not know how to flash "0P3PIMG" or "OTA" type files; couldn't find any directions.
The saddest part of this was to find the lack of support out there for my Sprint HTC One Max; as far as RUU's and the like.... We who have them are on an island by ourselves.
Click to expand...
Click to collapse
did you really skip over the fact that I provided you the ruu?????
Yea he did. It's crazy how much time ppl spend looking for help on xda and you guys have no clue how many ppl you've helped. On my behalf, I'm saying thanks to everyone. Every step by step instruction, every link, every replied post, every question answered.... Thank you all!!!!
Sent from my HTC0P3P7 using XDA Premium 4 mobile app
Thanks a lot borther!!!
You save my HTC One Max...I love you forever
Hello! Help please my phone HTC ONE MAX 16GB PCT he died after an unsuccessful re firmware, charging doesn't react when connecting the charging and pressing the volume button + enable doesn't respond... On windows7 64bit in device Manager it sees it as QHSUSB_DLOAD.... I downloaded ubuntu-14.04.3 Linuх , he sees it. Please Please send me on my email slava.postyrna[email protected] file ( unbrick.zip ) court or in the chat so I can flash the phone. The service center nearby there is no place, to reach it very cloves.
any one have mirror for this HTC One MAX - S-OFF Package…zip http://uploaded.net/file/gqwmbc08 ?
I cant download from that site..
is that compatible with htc m7 802d?
I want to make s-off my m7. hboot 2.49
is it work for my device m7 hbot 2.49?
kevin mitnick said:
any one have mirror for this HTC One MAX - S-OFF Package…zip http://uploaded.net/file/gqwmbc08 ?
I cant download from that site..
is that compatible with htc m7 802d?
I want to make s-off my m7. hboot 2.49
is it work for my device m7 hbot 2.49?
Click to expand...
Click to collapse
No. the t6 and m7 are two completely different phones. You need to post in the m7 section.