[Q] Unbrick Phone? PLease Help :c - Galaxy S III Q&A, Help & Troubleshooting

Hi everyone. I'm really new at rooting and flashing and I've managed to soft brick my Galaxy S3 SPH-L710. It gets stuck in a bootloop of cyangenmod and the Samsung logo. I first used CF-auto root, and then installed CWM Recovery on my phone, and just tonight I tried to install Cyangenmod and this happened. I know I screwed up and have made some really dumb beginner mistakes. Anyone know how to help? My download mode shows as follows:
Product Name: SPH-L710
Custom Binary Download: Yes (3 Counts)
Current Binary: Custom
Current Status: Custom
Qualcomm Secureboot: Enable.
I haven't attempted anything yet out of fear of making things worse. I can still get into CWM Recovery and everything if needed.

Electrixtoaster said:
Hi everyone. I'm really new at rooting and flashing and I've managed to soft brick my Galaxy S3 SPH-L710. It gets stuck in a bootloop of cyangenmod and the Samsung logo. I first used CF-auto root, and then installed CWM Recovery on my phone, and just tonight I tried to install Cyangenmod and this happened. I know I screwed up and have made some really dumb beginner mistakes. Anyone know how to help? My download mode shows as follows:
Product Name: SPH-L710
Custom Binary Download: Yes (3 Counts)
Current Binary: Custom
Current Status: Custom
Qualcomm Secureboot: Enable.
I haven't attempted anything yet out of fear of making things worse. I can still get into CWM Recovery and everything if needed.
Click to expand...
Click to collapse
this is international S3 forum buddy. this is your place : GALAXY S3 SPH-L710
though, try this tip:factory reset from recovery. if still the same persists, flash a stock firmware via odin.

Related

[Q] Strange bricked S2?

Hey!
I currently got CM 7 (Android 2.3.7) on my S2.
But I got some problems now, it's in boot loop, with no recovery and NO root!
I have no idea what do to now...
When I get into download mode it says the following:'
ODIN MODE
PRODUCT NAME: GT-i9100
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
So, here's the breakdown:
I got no root or recovery
I'm not experienced in S2 rooting, this phone is my friend's.
Boot loop, when I boot its still the Cyanogenmod boot logo.
Please help me!
follow this.
sebbe312 said:
Hey!
I currently got CM 7 (Android 2.3.7) on my S2.
But I got some problems now, it's in boot loop, with no recovery and NO root!
I have no idea what do to now...
When I get into download mode it says the following:'
ODIN MODE
PRODUCT NAME: GT-i9100
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
So, here's the breakdown:
I got no root or recovery
I'm not experienced in S2 rooting, this phone is my friend's.
Boot loop, when I boot its still the Cyanogenmod boot logo.
Please help me!
Click to expand...
Click to collapse
Vist galaxys2root.com
There is a simple method of rooting using supersu and cwm files.
U can flash this files from stock recovery.
Once u install this files u will ve cwm recovery. Then factory reset n wipe cache n dalvik cache.
Your os will load out of boot loop.
Surely it will work.
Follow instructions carefully.
Just boot phone into download mode and flash Siyah kernel via odin and then you will have recovery and root, simple.

galaxy tab 2 please help

hey everybody, im new here and hopefully i can get some help. ive got a galaxy tab 2 10.1 with stock android which was updated to 4.1.1 though an update. i looked at a few guides and came across a few guides.
followed it exactly as it said it passed in odin, but no clockworkmod, only stock android recovery still comes up. i let the galaxy tab 2 logo flash twice and released still only stock recover. ive tried this 3 times now even twice with:
GT-P5110_ClockworkMod-Recovery_6.0.1.0.Tar
and once with:
GT-P5113_ClockworkMod-Recovery_6.0.1.0.Tar
still no luck...
so i just factory reset it from the android recovery screen. and when i open download mode it still says this
ODIN MODE
PRODUCT NAME:GT-P5113
CUSTOM BINARY DOWNLOAD: YES(3 COUNTS)
CURRENT BINARY:CUSTOM
SO IM STUCK PLS SOMEONE HELP
SamsonX said:
hey everybody, im new here and hopefully i can get some help. ive got a galaxy tab 2 10.1 with stock android which was updated to 4.1.1 though an update. i looked at a few guides and came across a few guides.
followed it exactly as it said it passed in odin, but no clockworkmod, only stock android recovery still comes up. i let the galaxy tab 2 logo flash twice and released still only stock recover. ive tried this 3 times now even twice with:
GT-P5110_ClockworkMod-Recovery_6.0.1.0.Tar
and once with:
GT-P5113_ClockworkMod-Recovery_6.0.1.0.Tar
still no luck...
so i just factory reset it from the android recovery screen. and when i open download mode it still says this
ODIN MODE
PRODUCT NAME:GT-P5113
CUSTOM BINARY DOWNLOAD: YES(3 COUNTS)
CURRENT BINARY:CUSTOM
SO IM STUCK PLS SOMEONE HELP
Click to expand...
Click to collapse
This is the original galaxy tab section. You may get better results in the tab 2 section.
SamsonX said:
hey everybody, im new here and hopefully i can get some help. ive got a galaxy tab 2 10.1 with stock android which was updated to 4.1.1 though an update. i looked at a few guides and came across a few guides.
followed it exactly as it said it passed in odin, but no clockworkmod, only stock android recovery still comes up. i let the galaxy tab 2 logo flash twice and released still only stock recover. ive tried this 3 times now even twice with:
GT-P5110_ClockworkMod-Recovery_6.0.1.0.Tar
and once with:
GT-P5113_ClockworkMod-Recovery_6.0.1.0.Tar
still no luck...
so i just factory reset it from the android recovery screen. and when i open download mode it still says this
ODIN MODE
PRODUCT NAME:GT-P5113
CUSTOM BINARY DOWNLOAD: YES(3 COUNTS)
CURRENT BINARY:CUSTOM
SO IM STUCK PLS SOMEONE HELP
Click to expand...
Click to collapse
As mentioned, you really need to ask this in the Galaxy Tab 2 forums. However, quick answer: the stock ROM will overwrite recovery when it boots. If you install a custom recovery on your Tab 2, you MUST start the tablet in recovery immediately after ODIN finishes the flash. If you let it reboot, then the stock recovery will be restored.

Samsung Galaxy S3 Accidentally Disconnected While Backing Up Files On Samsung Kies

Hello,
I'm currently using a Samsung Galaxy S3 GT I9300 and is rooted through the CF Root method.
Just recently, I was backing up my files on Samsung Kies when I accidentally manually shut down my phone (so regretting this right now). Since then, my phone is unable to boot up and is always stuck at the boot logo "Samsung Galaxy SIII GT I9300". I have tried several methods such as flashing CWM Recovery and factory wipe everything and then installing custom roms but didn't work, even with repeated wiping and rebooting.
Custom Binary Download: Yes (16 counts)
Current Binary: Custom
System Status: Custom
Any help is greatly appreciated, thank you!!
Krewella
Reflash the firmware via odin. Are you sure it was reading and not writing because it's odd that it won't boot.

Help - Star GT S7262 duos whitescreened

ok, I', usually pretty good at rooting and such having my galaxy S4 for many years now but I got this Galaxy Star for work just to use it off wifi and bluetooth but it had 4.1 and i needed it on 4.4 for it to work so I knew i needed to root it, load recovery and find an updated rom.
I Odin'd CWM recovery and all I got was a white screen when going into recovery mode. didnt matter what i tried. I wound up flashing a file that also wiped out my download screen, now all I see it a blueish/white screen for download mode, but I can odin files ok.
I've tried every stock recovery hard reset file i can find online and nothing helps. Any help is appreciated. Is there any samsung stock firmware somehere that wipes everything???
Model: GT-S7262
and I seem to have bricked it now, wont even power up after flashing a phillipine version of the firmware.
well, no more white screen but now I have no display at all. still goes into download mode though.
Dougrun said:
ok, I', usually pretty good at rooting and such having my galaxy S4 for many years now but I got this Galaxy Star for work just to use it off wifi and bluetooth but it had 4.1 and i needed it on 4.4 for it to work so I knew i needed to root it, load recovery and find an updated rom.
I Odin'd CWM recovery and all I got was a white screen when going into recovery mode. didnt matter what i tried. I wound up flashing a file that also wiped out my download screen, now all I see it a blueish/white screen for download mode, but I can odin files ok.
I've tried every stock recovery hard reset file i can find online and nothing helps. Any help is appreciated. Is there any samsung stock firmware somehere that wipes everything???
Model: GT-S7262
Click to expand...
Click to collapse
I came from a Galaxy S4 too
You need to flash FireLord1's CWM 6.0.5.1 on stock ROM, otherwise you will get a whitescreen trying to enter.
I know it works with both Indian and Eaten European firmwares.
ok, so i need a link to a the stock rom and his CWM. I can find indian firmware i think.
Weird thing is, I can hear it boot up, Samsung Kies and Odin see it just fine. Just a black screen for everything now.
got it back working with this firmware..
http://d-h.st/1Ajc
Install twrp buddy
Same procedure as cwm
Believe me!!!! no white screen!!!
U will be booted into twrp

Odin can't detect my phone after rooting.

Hello everyone, this is my first time to post here. I would be grateful if you would guide me in this forum. : )
So this is my problem...
I have a Samsung Galaxy S3 (SHV-E210K) running on KitKat 4.4.4.
I wanted to install a Custom rom so I did some research on downloading and installing one. I found out that I needed to root my phone first before being able to install the rom, so I found this CF Autoroot for this specific model. I successfully installed it and rooted my phone using Odin v3.10.6. I already downloaded the custom rom and as I try to get my phone to Download mode, it says:
ODIN MODE
PRODUCT NAME: SHV-E210K
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download: Enabled
KNOX WARRANTY VOID: 1
RP SWREV: A2
I don't know what to do to install the rom. If I won't be able to install the rom, I would just like to revert everything and be able to use odin mode so if something fails in the future, I could use Odin to flash my phone...
Btw, I can use my phone entirely as a normal operating phone except only for that Odin or download mode.
Any help would be greatly appreciated.
Thanks in advance and have a good day everyone!

Categories

Resources