Hello,
I'm currently using a Samsung Galaxy S3 GT I9300 and is rooted through the CF Root method.
Just recently, I was backing up my files on Samsung Kies when I accidentally manually shut down my phone (so regretting this right now). Since then, my phone is unable to boot up and is always stuck at the boot logo "Samsung Galaxy SIII GT I9300". I have tried several methods such as flashing CWM Recovery and factory wipe everything and then installing custom roms but didn't work, even with repeated wiping and rebooting.
Custom Binary Download: Yes (16 counts)
Current Binary: Custom
System Status: Custom
Any help is greatly appreciated, thank you!!
Krewella
Reflash the firmware via odin. Are you sure it was reading and not writing because it's odd that it won't boot.
Related
hey everybody, im new here and hopefully i can get some help. ive got a galaxy tab 2 10.1 with stock android which was updated to 4.1.1 though an update. i looked at a few guides and came across a few guides.
followed it exactly as it said it passed in odin, but no clockworkmod, only stock android recovery still comes up. i let the galaxy tab 2 logo flash twice and released still only stock recover. ive tried this 3 times now even twice with:
GT-P5110_ClockworkMod-Recovery_6.0.1.0.Tar
and once with:
GT-P5113_ClockworkMod-Recovery_6.0.1.0.Tar
still no luck...
so i just factory reset it from the android recovery screen. and when i open download mode it still says this
ODIN MODE
PRODUCT NAME:GT-P5113
CUSTOM BINARY DOWNLOAD: YES(3 COUNTS)
CURRENT BINARY:CUSTOM
SO IM STUCK PLS SOMEONE HELP
SamsonX said:
hey everybody, im new here and hopefully i can get some help. ive got a galaxy tab 2 10.1 with stock android which was updated to 4.1.1 though an update. i looked at a few guides and came across a few guides.
followed it exactly as it said it passed in odin, but no clockworkmod, only stock android recovery still comes up. i let the galaxy tab 2 logo flash twice and released still only stock recover. ive tried this 3 times now even twice with:
GT-P5110_ClockworkMod-Recovery_6.0.1.0.Tar
and once with:
GT-P5113_ClockworkMod-Recovery_6.0.1.0.Tar
still no luck...
so i just factory reset it from the android recovery screen. and when i open download mode it still says this
ODIN MODE
PRODUCT NAME:GT-P5113
CUSTOM BINARY DOWNLOAD: YES(3 COUNTS)
CURRENT BINARY:CUSTOM
SO IM STUCK PLS SOMEONE HELP
Click to expand...
Click to collapse
This is the original galaxy tab section. You may get better results in the tab 2 section.
SamsonX said:
hey everybody, im new here and hopefully i can get some help. ive got a galaxy tab 2 10.1 with stock android which was updated to 4.1.1 though an update. i looked at a few guides and came across a few guides.
followed it exactly as it said it passed in odin, but no clockworkmod, only stock android recovery still comes up. i let the galaxy tab 2 logo flash twice and released still only stock recover. ive tried this 3 times now even twice with:
GT-P5110_ClockworkMod-Recovery_6.0.1.0.Tar
and once with:
GT-P5113_ClockworkMod-Recovery_6.0.1.0.Tar
still no luck...
so i just factory reset it from the android recovery screen. and when i open download mode it still says this
ODIN MODE
PRODUCT NAME:GT-P5113
CUSTOM BINARY DOWNLOAD: YES(3 COUNTS)
CURRENT BINARY:CUSTOM
SO IM STUCK PLS SOMEONE HELP
Click to expand...
Click to collapse
As mentioned, you really need to ask this in the Galaxy Tab 2 forums. However, quick answer: the stock ROM will overwrite recovery when it boots. If you install a custom recovery on your Tab 2, you MUST start the tablet in recovery immediately after ODIN finishes the flash. If you let it reboot, then the stock recovery will be restored.
Hi,
I recently tried to install CM 10.1 on my i9505 and it failed, now my phone wont boot past the samsung s4 boot screen.
I have dowloaded the latest I9505XXUAME2 firmware and flashed through odin, it still hasnt fixed the issue.
I have tried different recoveries and multiple odin flashes (which all complete successfully) but it still stops at the samsung boot screen.
I am not a superuser by any means but i have flashed every galaxy i have owned many times without fail.
Any help would be greatly appreciated.
Cheers
Hello,
I installed the (RazerDroid v2.5) http://forum.xda-developers.com/showthread.php?t=1816611.
After installing the ROM successfully (without any errors), I did a reboot, and since then the phone doesn't boot up beyond the Samsung Galaxy Ace logo. I am unable to go into recovery mode as well.
What should I do now? Is the phone dead? Any way to recover it?
Many thanks!
More information: My phone was locked to 3 Mobile UK network. I rooted the device first, then installed CWM prior to installing the ROM.
Use Odin Package According To Your Country Firmware After Flashing It You Will Be On Stock Rom
Hi everyone. I'm really new at rooting and flashing and I've managed to soft brick my Galaxy S3 SPH-L710. It gets stuck in a bootloop of cyangenmod and the Samsung logo. I first used CF-auto root, and then installed CWM Recovery on my phone, and just tonight I tried to install Cyangenmod and this happened. I know I screwed up and have made some really dumb beginner mistakes. Anyone know how to help? My download mode shows as follows:
Product Name: SPH-L710
Custom Binary Download: Yes (3 Counts)
Current Binary: Custom
Current Status: Custom
Qualcomm Secureboot: Enable.
I haven't attempted anything yet out of fear of making things worse. I can still get into CWM Recovery and everything if needed.
Electrixtoaster said:
Hi everyone. I'm really new at rooting and flashing and I've managed to soft brick my Galaxy S3 SPH-L710. It gets stuck in a bootloop of cyangenmod and the Samsung logo. I first used CF-auto root, and then installed CWM Recovery on my phone, and just tonight I tried to install Cyangenmod and this happened. I know I screwed up and have made some really dumb beginner mistakes. Anyone know how to help? My download mode shows as follows:
Product Name: SPH-L710
Custom Binary Download: Yes (3 Counts)
Current Binary: Custom
Current Status: Custom
Qualcomm Secureboot: Enable.
I haven't attempted anything yet out of fear of making things worse. I can still get into CWM Recovery and everything if needed.
Click to expand...
Click to collapse
this is international S3 forum buddy. this is your place : GALAXY S3 SPH-L710
though, try this tip:factory reset from recovery. if still the same persists, flash a stock firmware via odin.
hi
i tried rooting my gs3 GT I9300 with Samsung Galaxy S3ToolKit but in stead of using the root for gt i 9300 I USED THE ONE FOR I9305 ( stupid me )
and now it's stuck and i tried going to recovery mode ==) wipe===) factory reset but there is a message telling me no os installed sure you want to wipe and after i wipe (FAILED) and still the same problem please help
Follow the guide in general, stickies to flash a full stock rom using odin. If you are very lucky it might work.