Thank you for reading this.
Yes i know this is a common problem with alot of easy fixes, but it is a bit different in my case.
Please Read:
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
Help?
If I'm not mistaking all these rockchip tablets use lievsuite to download stock firmware, is there a small pinsize hole on it (other than a mic) this often gets you to the download mode and you would need the factory firmware from OEM website
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
If I'm not mistaking all these rockchip tablets use lievsuite to download stock firmware, is there a small pinsize hole on it (other than a mic) this often gets you to the download mode and you would need the factory firmware from OEM website
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
i have rk3066 tab too, called treq turbo in indonesian, bootloop becouse that driver not suitable with your OS ar Chipset like chainfire app, try to flash rom again
when you say flash rom, im to that point after reflashing my recovery via odin would all i have to do is reinstall the rom to recover? or would i have to recover original system first the apply the new rom
Related
I have an unrooted samsung s III, gt-i9300 which does not enter download mode. I do have recovery mode and the phone operates fine in normal mode. I thought I had a backup, but I was wrong. I tried to use cf-auto-root to root the device, thinking it would be easy, and I think download mode got overlaid in the process.
Without download mode, I find I cannot use ODIN to restore/install anything.
I also find that I cannot use Kies. When I use Kies, on a windows system, I seem to always get prompted for drivers. I thought all the samsung usb drivers were included with Kies.
full system reset gets rid of my user data, but did not restore download mode.
Can I use recovery mode to restore my system either to stock mode or to jelly bean? The phone is new and I don't have anything on it that I need to preserve.
Thanks!
There's no way the phone works and recovery work, but no download mode, you must be doing something wrong
You have to press Vol - + Home Button + Power Button untill the download mode appears (ca. 10sec).
instead of download, recovery menu with red triangle
GerasVille said:
You have to press Vol - + Home Button + Power Button untill the download mode appears (ca. 10sec).
Click to expand...
Click to collapse
First off, thanks for the speedy response!
Here is exactly what happens when I try that:
1) at around 6 seconds, I see a green android on its back, with a red triangle above his exposed inner
2) this will stay there until I hit the home key (all other keys are disabled)
3) when I hit the home key, I see the "Android system recovery <3e>" menu
If I try to do wipe data/factory reset or wipe cache partition, the problem remains.
I was able to get into download mode once, when I tried to install cf-auto-boot, but not since.
thanks again!
Pete
Recovery? You sure you're not pressing Volume UP?
using volume up
Glebun said:
Recovery? You sure you're not pressing Volume UP?
Click to expand...
Click to collapse
yup... not volume up. I tried that one too, because I thought I was going nuts.
When I do this:
1) power off
2) pull battery
3) insert battery
4) press and hold volume UP
5) press and hold home button
6) press and hold power
7) wait 5 seconds then release all 3
I see a hardward diagnostic screen showing "factory mode" in a blue background and a list of types of diagnostic tests (full test, item test, test report, clear eMMC, Version, Reboot).
No download mode next step is a USB Recovery |Jig .
Or service centre .
Possible you have a fake / clone SGS3 . Where purchased what firmware .
jje
Imm76d.i9300zsale9
JJEgan said:
No download mode next step is a USB Recovery |Jig .
Or service centre .
Possible you have a fake / clone SGS3 . Where purchased what firmware .
jje
Click to expand...
Click to collapse
I (incorrectly) thought that the clone was identical to the samsumg gt-i9300.
firmware is IMM76D.I9300ZSALE9
sounds like I need to start researching the firmware. THANKS!
no firmware from xda will work for you
Seems you got a mediatek clone.
Not only they will not run the official operating system including aftermarket ones like Cm (completely different hardware) but they are less powerful and have less interesting hardware than the real S3.
Additionally they don't tend to live very long and have lots of issues.
Verzonden door mijn GT-I9300 met xda premium
coolhof said:
Seems you got a mediatek clone.
Not only they will not run the official operating system including aftermarket ones like Cm (completely different hardware) but they are less powerful and have less interesting hardware than the real S3.
Additionally they don't tend to live very long and have lots of issues.
Verzonden door mijn GT-I9300 met xda premium
Click to expand...
Click to collapse
now you tell me! Thanks for the info.:crying:
pmckay said:
now you tell me! Thanks for the info.:crying:
Click to expand...
Click to collapse
Surely you must have seen you didn`t get a Samsung box with the seals intact as well as the bootupscreen that should say GT-I9300. And off course the price you payed must have been quite a bit lower than the real S3.
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.
Hello, i've been trying to find anything related to this tablet, a Hipstreet Equinox 10.1 HS-10 DTB1-4GB, from what i can tell its supposed to be based on android 2.3 gingerbread.
The tablet basically trefuses to boot up and i've been trying to find a way to get into recovery to do a factory reset or a firmware to force flash to factory reset but i have been unable to find out how to do either, or even any information/firmwares for this tablet. if anyone can help me it would be greatly apreciated.
dragonfly14 said:
Hello, i've been trying to find anything related to this tablet, a Hipstreet Equinox 10.1 HS-10 DTB1-4GB, from what i can tell its supposed to be based on android 2.3 gingerbread.
The tablet basically trefuses to boot up and i've been trying to find a way to get into recovery to do a factory reset or a firmware to force flash to factory reset but i have been unable to find out how to do either, or even any information/firmwares for this tablet. if anyone can help me it would be greatly apreciated.
Click to expand...
Click to collapse
Your tablet may not have CWM or TWRP recoveries..Some combinations you can try are:
When tablet is booting up press VOLUP or VOLDOWN or both.
When tablet is booting up press VOLUM + Power or VOLDOWN + Power or both.
UltraWelfare said:
Your tablet may not have CWM or TWRP recoveries..Some combinations you can try are:
When tablet is booting up press VOLUP or VOLDOWN or both.
When tablet is booting up press VOLUM + Power or VOLDOWN + Power or both.
Click to expand...
Click to collapse
its most definitely on stock recovery for GB 2.3, but i have not managed to get into it. i have Vol + vol - Menu, home and back buttons, so far i've tried volume +/- both + power and ive tried menu + power as well as back and the home individually. i have not managed to get anything different other than on home + power, when i do that, i ttakes 5x longer on the "hipstreet splash logo" once it gets past that though it says android then infiniblackscreen. - i dont get anything on a host computer via the USB either when trying any of these combos - hoping to get ADB to do a factory reset via ADB.
i used to have a ployer momo 9 and i remember that tablet had a special recovery mode with a special flasher and was wondering if something like that existed for this cheap tablet which is based on just about the same thing, allwinner dual core 1.0 ghz + 512mb ram + 4 gb rom.
dragonfly14 said:
its most definitely on stock recovery for GB 2.3, but i have not managed to get into it. i have Vol + vol - Menu, home and back buttons, so far i've tried volume +/- both + power and ive tried menu + power as well as back and the home individually. i have not managed to get anything different other than on home + power, when i do that, i ttakes 5x longer on the "hipstreet splash logo" once it gets past that though it says android then infiniblackscreen. - i dont get anything on a host computer via the USB either when trying any of these combos - hoping to get ADB to do a factory reset via ADB.
i used to have a ployer momo 9 and i remember that tablet had a special recovery mode with a special flasher and was wondering if something like that existed for this cheap tablet which is based on just about the same thing, allwinner dual core 1.0 ghz + 512mb ram + 4 gb rom.
Click to expand...
Click to collapse
Using ADB is a good idea .I didn't think of that though :silly:...
UltraWelfare said:
Using ADB is a good idea .I didn't think of that though :silly:...
Click to expand...
Click to collapse
thanks, but yeah, i cant get anything out of it so far and was hoping someone had the magical way to revive it :/ i believe on my ployer it was something ridiculous like vol - + home + back + power for 5 seconds and i had to get it flashing within 5 seconds of that or it would switch modes.... x_x
dragonfly14 said:
thanks, but yeah, i cant get anything out of it so far and was hoping someone had the magical way to revive it :/ i believe on my ployer it was something ridiculous like vol - + home + back + power for 5 seconds and i had to get it flashing within 5 seconds of that or it would switch modes.... x_x
Click to expand...
Click to collapse
Wait I found something for you
There is a few tricks to get your Tablet back , You require a few things
-A usb cable to connect to computer
-Internet connectivity
Now Lets start by putting the tablet in Android recover mode .
1. Connect the tablet to the USB port on the Computer .
2. Press and hold the power button and the Big button on the tablet , Keep pressing it until the logo of the android gut with his gut open shows up .
3. It is possible to perform a reset using the ADB (Android Debug Bridge)
I did mine on Windows XP , (Does your tablet install correctly in the Device manager? )
If so That is great news , You may goto step 5
If not Goto step 4 :
Step 4: Getting the Chinese driver equivalent for your tablet .
Get the drivers for the Ainol 7" Auror tablet (or equivalent )
Now Before the driver will work with your device (you can try to install it but it will give you an INF error)
You must edit the file (.INF) to match your USB id of the tablet
(At the bottom of the file change the STRINGS section to the device codes of your tablet ) (found by right clicking the Unknown device in the device manager . the (VID_1f3a_PID_efe8) is the HARDWARE ID and the
[Strings]
USBDRV="USB Devices"
USB\VID_1f3a&PID_efe8.DeviceDesc="USBDevice(VID_1f3a_PID_efe8)"
YOUR STRINGS:
USBDRV="USB Devices"
USB\<YOURDEVICEID>.DeviceDesc=USBDevice(<YOURDEVICEID>)"
Step 5:
Get the Recovery tool from here
https://spideroak.com/share/KNQW243.../CWM_Recovery_Manta_MID08_windows_install.zip
This will give you a suite of tools to restore your device to factory reset
Use it to install the recovery partition , and then reboot your device in recovery mode , Then use the Vol + and - buttons to navigate and power button to Enter .
(Source : click here)
Hello there, i have a Hipstreet too, but my android have crashed and dont turn on anymore.
I cant find the stock rom or custom rom anywhere.
Can you find some of these?
If you dont, you can make a backup and send a link to me?
Thanks and sorry for the english.
Hi,
I bought lenovo tab 2 A7-10f for my brothers birthday.
After one week of using it he brought it back to me with words: I broke it.
He rooted (Kingo software) the Android system and than he cleaned some system apps which caused the crash of the system.
Now when I start it the boot stops in lenovo welcome animation and I can't get to boot mode anymore (pushing volume and start button) the system freeze in welcome screen with lenovo and android logo - no martian.
When I tried to connect by ADB the device appeared to be "offline" and I can't reach it.
Can you help me, please?
OS ANDROID 4.4
CPU: MTK 8127 QC 1.3GHZ
You need lenovo flash tool and latest rom. T2-A7-10F_USR_S041_150112_ROW or another.
power off your tablet.
push volume down and connect with your computer.
tablet will start and show he is charching.
Start flash tool. load the scatter file. In above rom it is : MT8127_Android_scatter.txt
once loaded push download.
some files will go to your tablet. If flash tool quickly stops , power off your tablet, but leave the usb cable.
Once powerd off , flash tool will continue.
when het is finished , you will see this on your computer.
disconect and restart tablet.
2nd possibility : power off you tablet
hold 3 buttons. Poweron , + and -
when tablet vibrates , release powerbutton but do not release + and - button
now your tab will start in recovery. here the tab says : no command and you push the powerbutton to see the menu.
there you can choose : wipe data/factory reset
after reset choose to reboot.
if this factory reset does not restore you tab , you must flash the rom.
choosing with keys :
with - button you go down
with +button you select
with power button menu will show
Can someone help me with a link to the stock rom ?
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Try resetting the phone from recovery.
Enter into recovery(use possible combinations of power+vol up or power+vol down or power+vol up+vol down) and factory reset the phone. This might help.
danstermadman said:
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Click to expand...
Click to collapse
I was asking for a way to download the stock rom for lenovo. now i got both a smartphone and a tablet from lenovo.
edit: when i try to us e the method showed by stevencumps,nothing happen. is there a posibility to flash the rom via stock recovery ?
danstermadman said:
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Click to expand...
Click to collapse
That's amusing. they have a lenovo tablet and you're telling them to look for their stock firmware on a site for samsung devices and to restore the device with a program that is made for samsung devices, lol.
Rom original zip for upgrade to lollipop tab 2 a7 10f
honzasasak said:
Hi,
I bought lenovo tab 2 A7-10f for my brothers birthday.
After one week of using it he brought it back to me with words: I broke it.
He rooted (Kingo software) the Android system and than he cleaned some system apps which caused the crash of the system.
Now when I start it the boot stops in lenovo welcome animation and I can't get to boot mode anymore (pushing volume and start button) the system freeze in welcome screen with lenovo and android logo - no martian.
When I tried to connect by ADB the device appeared to be "offline" and I can't reach it.
Can you help me, please?
OS ANDROID 4.4
CPU: MTK 8127 QC 1.3GHZ
Click to expand...
Click to collapse
HERE YOU GO
I am not sure how this works but this is the downloable file any tablet tab 2 A7 10F gets when it's going to upgrade from kitkat 4.4 to lollipop 5.0 so I guess this will work on any of your tablets. This versión is supposed to be for latinamerica but It holds many languagues if any of you need others than Spanish or English.
This is the link, join the lines
just to avoid being banned
h
t
t
p
s
:
/
/
drive.google.com/
file/
d/
0B0M2L15KUCM2OXdITzZ2YWVPWUk/
view?usp=sharing
---------- Post added at 02:36 AM ---------- Previous post was at 02:31 AM ----------
HERE YOU GO
I am not sure how this works but this is the downloable file any tablet tab 2 A7 10F gets when it's going to upgrade from kitkat 4.4 to lollipop 5.0 so I guess this will work on any of your tablets. This versión is supposed to be for latinamerica but It holds many languagues if any of you need others than Spanish or English.
This is the link, join the lines
just to avoid being banned
h
t
t
p
s
:
/
/
drive.google.com/
file/
d/
0B0M2L15KUCM2OXdITzZ2YWVPWUk/
view?usp=sharing
Droidriven said:
That's amusing. they have a lenovo tablet and you're telling them to look for their stock firmware on a site for samsung devices and to restore the device with a program that is made for samsung devices, lol.
Click to expand...
Click to collapse
My twrp is very slow. İs this normal? Bad eng sorry
i just bought a "Dragon Touch M7" from ebay. It uses a Mediatek MT8127 chipset. It comes with KitKat. The manufacturer's website (tabletsexpress.com) has the download links for FIRMWARE file for 5.0 Lollipop and the SP Flash tool for it. I downloaded the 5.0 firmware and flash tool.. however, I cant get into download mode on the tablet because the tablet doesnt have any buttons. no home button no volume buttons. I tried "adb reboot download" command but it just reboots the tablet. When I type in reboot recovery I can get into some stock recovery mode but i cant move up and down because my tablet has no volume buttons. All i can do is hold down power and turn it off. Pressing the power button hides the choices of "Reboot now; install from sdcard; install from" .. etc... is recovery mode the same thing as download mode?? if so, nothing happens when i try to flash the firmware.
I have rooted and flashed custom ROMs with samsung galaxys in the past so I do have some experince with this kind of stuff.
Wow this is mind puzzling perhaps you need to google this tablet via Chinese websites and use Google Translate. You need to get the exact firmware for the tablet to power-up.
hackaveli said:
i just bought a "Dragon Touch M7" from ebay. It uses a Mediatek MT8127 chipset. It comes with KitKat. The manufacturer's website (tabletsexpress.com) has the download links for FIRMWARE file for 5.0 Lollipop and the SP Flash tool for it. I downloaded the 5.0 firmware and flash tool.. however, I cant get into download mode on the tablet because the tablet doesnt have any buttons. no home button no volume buttons. I tried "adb reboot download" command but it just reboots the tablet. When I type in reboot recovery I can get into some stock recovery mode but i cant move up and down because my tablet has no volume buttons. All i can do is hold down power and turn it off. Pressing the power button hides the choices of "Reboot now; install from sdcard; install from" .. etc... is recovery mode the same thing as download mode?? if so, nothing happens when i try to flash the firmware.
I have rooted and flashed custom ROMs with samsung galaxys in the past so I do have some experince with this kind of stuff.
Click to expand...
Click to collapse
I got one of these too, generic knock off with the specs all spoofed to make it look better then it is.
It's on 4.4 would like it at least on 5, any luck with yours?