Hoping some of you guys with a little more knowledge round here will be able to help with this one.
I believe I've USB bricked my Onda VI40 v3 16gb, I can't access the internal sd card and the device wont communicate with my pc when its connected by usb.
I have CWM Recovery installed and can access and flash roms from it but pretty much all of the guides to unbrick the usb require fastboot and I cant for the life of my work out how to get it on the Vi40.
Can anyone shed some light on how to access fastboot on the Vi40 or any other suggestions for unbricking the usb.
I have flashed multiple different roms on to the device in an attempt to fix it with no luck.
I can access an emulated terminal screen on the tablet when booted if thats of any help.
I have also tried the image_flash and mtd0.img fix but I don't know the devices CID so that doesn't work.
Thanks in advance.
Go back to the original rom
check what version is your onda vi40 by checking the serial numbers at the back (ex Xxxv3xxx) means its a v3.
then go to onda.cn and look for your version firmware.
you nay have to use Google translate.
now once you have downloaded the correct firmware version pls remember to rename the image file which is in Chinese to any English name. hmmm on second thought go to slatedroid.com and search for the onda forums they have a detailed English guide to help you.
don't panic, the same thing happened to me on my onda vi10 elite but my mistake was flashing a custom firmware. just like you I lost some partitions but when I flashed the original 4.03 v1.1 firmware and selected format the tablet is fine again.
Vi40 16gb v3 - can you flash using osx?
Hi all, my vi40 was connected to my MacBook pro the other night ttransfer some mp3s and I think I may have turned Off USB mode on the tablet before unmounting.
Now every time I try to install an app I get the "no space left" type message altjough there's about 15gb of space left.
Almost like permissions won't allow write
Downloading from play store starts but never completes
I'm thinking may be best to reflash the firmware?
I only have macs though.
If I have a mate with a vi40 same model would I be able to clone his onto my tablet using mac carbon copy cloner app maybe?
Cheers
Chris
---------- Post added at 08:59 AM ---------- Previous post was at 08:52 AM ----------
Ps every time I turn off and reboot it reverts to Chinese too
Easy, run BootCamp on your Mac, I have bootcamp on two of my macs and they run windows 7 pretty nicely
Sent from my ONDA MID using xda app-developers app
jayahhdee said:
Hoping some of you guys with a little more knowledge round here will be able to help with this one.
I believe I've USB bricked my Onda VI40 v3 16gb, I can't access the internal sd card and the device wont communicate with my pc when its connected by usb.
I have CWM Recovery installed and can access and flash roms from it but pretty much all of the guides to unbrick the usb require fastboot and I cant for the life of my work out how to get it on the Vi40.
Can anyone shed some light on how to access fastboot on the Vi40 or any other suggestions for unbricking the usb.
I have flashed multiple different roms on to the device in an attempt to fix it with no luck.
I can access an emulated terminal screen on the tablet when booted if thats of any help.
I have also tried the image_flash and mtd0.img fix but I don't know the devices CID so that doesn't work.
Thanks in advance.
Click to expand...
Click to collapse
Hi ,
Have you tried to reflash with livesuite ? if not then do it with a stock rom and reflash cwm from there no ? remember to enable "usb mode" by pressing menu key then plugging the tablet to the pc ( the menu key act as a temporizer for the tablet to be detected in that mode afaik)
I accidently formatted my Samsung Galaxy Tab 2 GT-P7500. It was rooted since before and I entered the boot menu (at start-up) and were trying to find a way to remove the sd card that was on the harddrive, (I found this annoying since I couldn't remove the old owners files from there). I tried the command "format/system" as well as "format/cache" and now I can't start Android anymore. My guess is that I removed Android together with everything else on the harddrive. I basically pressed the self-destruct-button... Well, is there anything I can do to fix this?
I have tried to root it again using this method:[ thedroiddemos.com/2011/08/28/how-to-root-the-samsung-galaxy-tab-10-1-video-walkthrough ] All went well until the last reboot. My tablet couldn't start Android, it ended up stuck at the "Samsung Galaxy Tab 10.1"-screen.
Therefore I tried to install Android by using this guide: [ youtube.com/watch?v=qmHWAOgqlDk ] This doesn't work since the tablet doesn't pop up as an external harddrive/device when I plug it into the USB. However, the computer does recognize that something is there (it calls it an MTB-device) and it installs drivers automatically. I've also installed Samsung's USB drivers [ Sprint_L710_GSIII_Samsung_USB_Driver_v1_4_6_0 ].
I had CWM 5 from the start and after the attempt to "re-root" it changed to CWM 4. I had Android version 4 before things went wrong.
I have spent numerous hours on this self inflicted problem already. I hope that someone here is brighter than me and can help me out!
Flash stock rom with Odin... Get Stock rom from sams firmware...
Sent from my GT-S7500 using xda premium
Did this work? Do you have link to download?
I did same thing with my HTC desire HD. Can anyone help me on hoe to install new rom in it.plz
[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem
I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
maxvg said:
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
Click to expand...
Click to collapse
I think you accidentally stumbled into the wrong forum. This one is for the P7500/7510 type 10.1 tablet... The very first one.
I'm betting you'll have better luck with your questions in the correct forum.
Sorry I couldn't help you more.
Best of luck.
Olivier V said:
I think you accidentally stumbled into the wrong forum. This one is for the P7500/7510 type 10.1 tablet... The very first one.
I'm betting you'll have better luck with your questions in the correct forum.
Sorry I couldn't help you more.
Best of luck.
Click to expand...
Click to collapse
awh thx,
im very sry that i did this, im kinda new here :/:angel: