Thanks for cm-10-20131006-NIGHTLY-ruby.zip - HTC Amaze 4G

Thanks for the great cm-10-20131006-NIGHTLY-ruby.zip.
On a hunch, that's Sportsstar89.

pbergonzi said:
Thanks for the great cm-10-20131006-NIGHTLY-ruby.zip.
On a hunch, that's Sportsstar89.
Click to expand...
Click to collapse
uhm where did you see this?
http://goo.im/devs/Sportsstar89/Ruby makes me think its on official CM ?
interesting.. did it work "okay" ?
*edit*
no commits for a long time.. just a random rebuild? http://changelog.bbqdroid.org/#/ruby/next

Ashcunak said:
uhm where did you see this?
http://goo.im/devs/Sportsstar89/Ruby makes me think its on official CM ?
interesting.. did it work "okay" ?
*edit*
no commits for a long time.. just a random rebuild? http://changelog.bbqdroid.org/#/ruby/next
Click to expand...
Click to collapse
It was on http://www.get.cm/?device=ruby, and is official Nightly for CM10.
I just figure if it is for the amaze, it was Sportsstar89.
It works great, and seems even peppier to me. I run CM10 'cause it has some features I need that are not yet present in the newer ROMs.

pbergonzi said:
It was on http://www.get.cm/?device=ruby, and is official Nightly for CM10.
I just figure if it is for the amaze, it was Sportsstar89.
It works great, and seems even peppier to me. I run CM10 'cause it has some features I need that are not yet present in the newer ROMs.
Click to expand...
Click to collapse
Tried to flash over last unofficial and it wouldn't go past the cm spinning logo restored backup.

lifeisfun said:
Tried to flash over last unofficial and it wouldn't go past the cm spinning logo restored backup.
Click to expand...
Click to collapse
That's too bad. I used 4EXT with smartflash enabled, though I don't need it for S-OFF, just forgot to disable it. Since my last ROM was the CM10 immediately before it I wiped only Cache and Dalvik, but remember there may be more to flash if not coming from CM10.
Are you sure you got the whole file? Also, it could take 10 minutes first boot at CM logo. Why not try again, and maybe pre-flash the kernel--there's instructions around.
Maybe this will help:
http://forum.xda-developers.com/showthread.php?t=2079288&highlight=stuck+spinning
And remember to flash the proper gapps:
http://wiki.cyanogenmod.org/w/Gapps
Also wouldn't surprise me if one of the other developers sees this thread and replies the quick fix.
Good luck.

Related

[Q] Glitch kernel with TeamHackSung ICS 6.5?

I put the TeamHackSung ICS 6.5 rom on my Fascinate, and then installed the Glitch v1.4 beta 5 kernel. Found that my 3G no longer would connect. I looked through the dev thread, and in post #5 saw, "Signal won't work, this kernel is GSM, your fascinate is CDMA" (http://forum.xda-developers.com/showthread.php?t=1459530&highlight=glitch+v14)
That sounds pretty definitive that you can't use this Glitch kernel with the Fascinate, yet I could have sworn I've read about others using it. Am I misunderstanding something here?
Anthony2816 said:
I put the TeamHackSung ICS 6.5 rom on my Fascinate, and then installed the Glitch v1.4 beta 5 kernel. Found that my 3G no longer would connect. I looked through the dev thread, and in post #5 saw, "Signal won't work, this kernel is GSM, your fascinate is CDMA" (http://forum.xda-developers.com/showthread.php?t=1459530&highlight=glitch+v14)
That sounds pretty definitive that you can't use this Glitch kernel with the Fascinate, yet I could have sworn I've read about others using it. Am I misunderstanding something here?
Click to expand...
Click to collapse
im running glitch v14 b5 on ths 6.5 with no issues.
Humph. That certainly makes sense, given that the Glitch thread is in the Fascinate forums...but why did someone say there's a CDMA vs GSM problem?
Lemme try reinstalling it, after first doing another Nandroid backup.
Is the kernel that comes with TeamHackSung ICS 6.5 rom available, so that I don't have to fuss with Nandroid if I need to revert from Glitch?
just reflash the rom but dont wipe data.
Nope...got the same result. No 3G access.
Anything else I can try?
Anthony2816 said:
Nope...got the same result. No 3G access.
Anything else I can try?
Click to expand...
Click to collapse
odin back to stock and start over...if that still dont work then you might have to activate another smartphone on your line then reactivate your current device.
droidstyle said:
odin back to stock and start over...if that still dont work then you might have to activate another smartphone on your line then reactivate your current device.
Click to expand...
Click to collapse
Groan...I'll have to put off starting over for a bit; I don't have time right now to set up everything again. And I'm a bit worried about "reactivate your current device" since, per my other thread, I'm unable to get a dial pad when calling *228.
the problem is you flashed the glitch b4 for 6.0 instead of the b4 6.1 version. If you read my guide it clearly states which version to flash. Also that link you posted is for the TELUS Fascinate NOT the Verizon Fascinate...
Well, I flashed with the b5 for 6.1 version, and while the 3G worked, I ended up with the unable-to-Nandroid-backup bug. Since the only remedy I could find (clear the cache and Dalvik) didn't help, I've gone back to the kernel that came with TeamHackSung ICS. I'll keep an eye posted to see if future Glitch versions manage to fix the backup bug. Thanks for all the help.
Anthony2816 said:
Well, I flashed with the b5 for 6.1 version, and while the 3G worked, I ended up with the unable-to-Nandroid-backup bug. Since the only remedy I could find (clear the cache and Dalvik) didn't help, I've gone back to the kernel that came with TeamHackSung ICS. I'll keep an eye posted to see if future Glitch versions manage to fix the backup bug. Thanks for all the help.
Click to expand...
Click to collapse
It should be fixed soon... For now, flash an older glitch kernel.. Backup.. Flash newest glitch
Sent from my SCH-I500 using xda premium
neh4pres said:
It should be fixed soon... For now, flash an older glitch kernel.. Backup.. Flash newest glitch
Click to expand...
Click to collapse
S'pose that's a workaround, although it makes the noob in me a bit nervous to keep flashing part of the OS like that.
Plus, despite having read the feature list, I'm still not clear just what switching to Glitch does for me.
Anthony2816 said:
I'm still not clear just what switching to Glitch does for me.
Click to expand...
Click to collapse
Glitch gives you the ability to overclock up to 1500mhz... also in call audio is clear and alot more crisp than the stock kernel...the bug where you have to always adjust the volume down on every call is fixed aswell. I also like the glitch recovery alot better...you can wipe cache and dalvik at the same time.
droidstyle said:
I also like the glitch recovery alot better...you can wipe cache and dalvik at the same time.
Click to expand...
Click to collapse
Do you think there's any chance that these changes to the recovery have something to do with the Nandroid backup problem?
Anthony2816 said:
Do you think there's any chance that these changes to the recovery have something to do with the Nandroid backup problem?
Click to expand...
Click to collapse
There is a problem with a partition not being mounted. And is being looked at. Find out more info in the glitch v14 thread in development.. For now just do a backup with the b3 kernel then flash back to b5
Sent from my SCH-I500 using xda premium
hey anthony if u dial*22890 u dont need to press 1. i had the same problem...it drove me crazy. lol
BDogg718 said:
hey anthony if u dial*22890 u dont need to press 1. i had the same problem...it drove me crazy. lol
Click to expand...
Click to collapse
Yes, thanks, someone told me that on another thread. To summarize:
To activate phone or update roaming without a keypad:
*22890 ---> This will program/activate your phone.
*22891 ---> This will update your roaming capabilities.
No need to hit other buttons after dialing. Let it finish, and reboot your phone.
You can also try dialing star 228 and then hit the menu button and add 8 or 10 2-second pause to it... It will look like this: *228,,,,,,,,,1
Hey guys, do you need the gingerbread boot loader before going to glitch? I can't find them in the vanilla ROM post.
Sent from my SCH-I500 using XDA App
Here ya go.
You don't really "need" the bootloaders before flashing glitch, but you should definitely have them to minimize any issues. Also, if you like BLN, I would flash B4 as opposed to B5, it's not working quite right on the latest beta.
k_nivesout said:
Also, if you like BLN, I would flash B4 as opposed to B5, it's not working quite right on the latest beta.
Click to expand...
Click to collapse
With the B5 kernel, my backlights come on when I have unread emails...and since I don't check them very often, I worry the feature is using a lot of battery. Is there a way to turn it off?
k_nivesout said:
You don't really "need" the bootloaders before flashing glitch, but you should definitely have them to minimize any issues.
Click to expand...
Click to collapse
Just what are the bootloaders? What do they do, and how do I use them?

[WIP][ROM][4.4] Cyanogenmod 11 for i777 [17.11.2013]

Hey all!
It's first build of CM11 for i777
Downloads:
ROM (17.11.2013): http://d-h.st/Swz
core google apps (17.50 MB): http://d-h.st/PbA
Sources:
kernel: https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-11.0
Do not promise to support it in future
Rom is not tested due I have no such device.
Thanks!!!
But if i want to install i have to be on cm10.2 and flash cm11 and core apps without wipes? Right? O i can install it from a 4.1.2 samsung rom?
Sent from my SGH-I777 using XDA Premium 4 mobile app
Wayland_ACE said:
Hey all!
It's first build of CM11 for i777
Downloads:
ROM (17.11.2013): http://d-h.st/Swz
core google apps (17.50 MB): http://d-h.st/PbA
Sources:
kernel: https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-11.0
Do not promise to support it in future
Rom is not tested due I have no such device.
Click to expand...
Click to collapse
Doesn't boot. Just spinning logo forever. Didn't have time to see if ADB was on to try to get a logcat. Will try later.
auTONYmous said:
Doesn't boot. Just spinning logo forever. Didn't have time to see if ADB was on to try to get a logcat. Will try later.
Click to expand...
Click to collapse
I had been keeping an eye on his i9100 thread and the jist was to flash the latest CM nightly to have the newest recovery then reboot recovery and flash Waylands CM11 like normal.
Thanks Wayland, I am glad you have decided to help us out as well!
Also I just tested using the steps from the i9100 thread and still just get the CM boot logo. Nothing I did could get past it. I could however restore a Nandroid I had just made so no harm done.
Kind Regards,
Render
It doesnt boot for me too I would like to help with a logcat but the usb port dont work on my phone
Thanks anyway!
Sent from my SGH-I777 using XDA Premium 4 mobile app
I will try again later today and provide a Log when I get back home
Logcat
I could not get past the CM boot logo so I could not provide a log at. If there is another way to get one for you then please let me know so I can do so.
Kind Regards
Render
I tried my best to get my phone to spit out a logcat because my phone also would not boot, it just sat at the splash screen. But, alas, I could not figure out how to get my device to not show offline. I know how to do it when Android is running, but not like that. BUTTTT, if someone can explain to me how to make the phone go "online" for adb during boot, I can pull a logcat, and would be more than grateful to do so, because im dying to try KitKat. Keep up the good work!
fastboot?
Is there no way to put the phone into fast boot mode and get a logcat that way? Would give it a try myself but my comp is on the fritz.
CWM
Rookie407 said:
Is there no way to put the phone into fast boot mode and get a logcat that way? Would give it a try myself but my comp is on the fritz.
Click to expand...
Click to collapse
This might be a long shot, but I think it requires you to have CWM 6.0.4.3 and higher to install correctly. You might double check your current version.
My CWM version was 6.0.4.5 and it doesnt boot. So theres may be a problem that only a logcat could show..
Sent from my SGH-I777 using XDA Premium 4 mobile app
Wayland said he would be taking another look at CM11 and our phone tomorrow. Just so you guys know.
Read on the i9100 forum before that someone who couldn't it to boot the normal way got it to work by just flashing CWM and not CM10.2. Tried that and no luck here.
phillytemptation said:
Read on the i9100 forum before that someone who couldn't it to boot the normal way got it to work by just flashing CWM and not CM10.2. Tried that and no luck here.
Click to expand...
Click to collapse
Could it be an incompatible kernel issue? I know on the lg optimus zip and galaxy precedent (both straight talk phones with dev support from another forum) we had to enable sd-ext before cm would work. Not sure if that's the case here or not just a suggestion.
Wish I had internet to set up my build environment.
I have been watching the i9100 thread and have e been trying everything that has worked there but to no avail. I have been wanting to compile cm11 but have not had the time to do so. Wayland, most likely, will need to make some minor change but since he does not own our phone so we will need to be patient. I told him I would volunteer to test if need be.
RenderBroken said:
I have been watching the i9100 thread and have e been trying everything that has worked there but to no avail. I have been wanting to compile cm11 but have not had the time to do so. Wayland, most likely, will need to make some minor change but since he does not own our phone so we will need to be patient. I told him I would volunteer to test if need be.
Click to expand...
Click to collapse
If needed I have a spare s2 I can use for dev purposes however I'm not on the i777 but the s959g(straight talk) Vasily the same but minor software differences. I can be reached at [email protected] a lot easier then I can on this thread if y'all need any assistance.
I have been working on 4.4 for the i777 and getting CM11 to work right, I found that some people had to do ANOTHER Wipe data/factory reset AFTER flashing the rom and gapps. This is what has to be done on the CM11 rom I ported to the i777 to make it work. Just thought I would share.
Would you happen to know what is not working on this ROM? Any bugs you have found? Thanks.
RenderBroken said:
I have been working on 4.4 for the i777 and getting CM11 to work right, I found that some people had to do ANOTHER Wipe data/factory reset AFTER flashing the rom and gapps. This is what has to be done on the CM11 rom I ported to the i777 to make it work. Just thought I would share.
Click to expand...
Click to collapse
hmm still can't get it to boot.
RenderBroken said:
I have been working on 4.4 for the i777 and getting CM11 to work right, I found that some people had to do ANOTHER Wipe data/factory reset AFTER flashing the rom and gapps. This is what has to be done on the CM11 rom I ported to the i777 to make it work. Just thought I would share.
Click to expand...
Click to collapse
Doesn't work. Not only that but now I can't go back to cm 10.2 after flashing this. I'd advise everyone to stay away from this port until its 100℅ bootable. If you try to go back you end up with status 7 error.
Sent from my Nexus 4 using Tapatalk

[Q] Post-s-off OTA update -- Not techie enough to follow update thread. Stuck :(

Hey all. I am sorry to ask, but I am not good enough to figure out how to do what has to be done to get the latest update to update the radio so I can upgrade to the newest roms that are out. I am currently running one of mdmower's original no-flicker builds. I have been having problems with the phone hitting buttons when I talk on it (cheek-dialing) during calls, and figured it's probably time to upgrade. But I noticed that post the new stock-OTA, I can't just upgrade.
I have HTCDev engineering, Root, S-off (I don't remember which method I used), and SuperCID. I realize there is a whole thread on how to flash just the files related to upgrading the radio, but I have read it like 20 times and unfortunately, I am having a really hard time following it.
I am embarrassed to admit that I can't figure this out.
At this point, I don't care about what is installed on my phone and am happy to do a clean wipe, lose all my apps, as long as I dont brick it. :crying:
If anyone's willing to help me, I would be in your debt.
dcooterfrog said:
https://dl.dropboxusercontent.com/u/5271399/PJ53IMG.zip
Click to expand...
Click to collapse
Download that file, and place it on the root of your SD card as a zip file. (not in any folders)
Boot into your bootloader and select bootloader. It will automatically do the rest. Once done, remove the zip file from your SD card.
articzap said:
Download that file, and place it on the root of your SD card as a zip file. (not in any folders)
Boot into your bootloader and select bootloader. It will automatically do the rest. Once done, remove the zip file from your SD card.
Click to expand...
Click to collapse
WOW. I don't....can't....how did you.....
Can I paypal you a few bucks or something? I am forever in your gratitude. Truly humbled and feel even more stupid now. I don't belong playing with my phone!
dangerousnewbie said:
WOW. I don't....can't....how did you.....
Can I paypal you a few bucks or something? I am forever in your gratitude. Truly humbled and feel even more stupid now. I don't belong playing with my phone!
Click to expand...
Click to collapse
I am glad this helps
as a side note I have been running cm11 nightlies with nary a problem.
dcooterfrog said:
I am glad this helps
as a side note I have been running cm11 nightlies with nary a problem.
Click to expand...
Click to collapse
I would imagine if we are running CM10.2.1 this update should not adversely impact that. I am thinking of jumping to CM11 as a daily runner. It is good to hear that it is stable.
Has anyone got Isis to work running CM10.2.1 or CM11 with this latest update?
dangerousnewbie said:
WOW. I don't....can't....how did you.....
Can I paypal you a few bucks or something? I am forever in your gratitude. Truly humbled and feel even more stupid now. I don't belong playing with my phone!
Click to expand...
Click to collapse
No money necessary! Just enjoy your phone :good:
therreid said:
I would imagine if we are running CM10.2.1 this update should not adversely impact that. I am thinking of jumping to CM11 as a daily runner. It is good to hear that it is stable.
Has anyone got Isis to work running CM10.2.1 or CM11 with this latest update?
Click to expand...
Click to collapse
What CyanogenMod 11 ROM is that stable for this device?
swordmastr54 said:
What CyanogenMod 11 ROM is that stable for this device?
Click to expand...
Click to collapse
None that I have heard of. It seems like all have bugs. My phone in important for work so I am running CM 10.2.1
swordmastr54 said:
What CyanogenMod 11 ROM is that stable for this device?
Click to expand...
Click to collapse
I run CM11M4, and its pretty damn stable. And that's with ART mode. GPS can be funky at times, but that's it.
articzap said:
I run CM11M4, and its pretty damn stable. And that's with ART mode. GPS can be funky at times, but that's it.
Click to expand...
Click to collapse
Can you post a link? It seems the stuff in dev area needs to be cleaned up its old or not used at all.
swordmastr54 said:
Can you post a link? It seems the stuff in dev area needs to be cleaned up its old or not used at all.
Click to expand...
Click to collapse
http://download.cyanogenmod.org/?device=fireball
articzap said:
http://download.cyanogenmod.org/?device=fireball
Click to expand...
Click to collapse
CM11 Started off stable, but started having random reboots/Freezes and data drops, battery drain.
CM10.2 is the way to go for now.

[Q] CM11 Question

I am running CM11 with one plus one conversation.. I have found that every couple of calls there is no sound on either end and I have to reboot the phone. I have searched for an answer but can not find one. Does anyone know of a fix? Thanks and I already checked the website I got it all from and there is nothing on it about this issue.. thanks again
mcernuto said:
I am running CM11 with one plus one conversation.. I have found that every couple of calls there is no sound on either end and I have to reboot the phone. I have searched for an answer but can not find one. Does anyone know of a fix? Thanks and I already checked the website I got it all from and there is nothing on it about this issue.. thanks again
Click to expand...
Click to collapse
lol you and you're one plus one conversation haha, try using the rom with out it. If the problem goes away it just means that the mod is the cause of your issue.
dzee206 said:
lol you and you're one plus one conversation haha, try using the rom with out it. If the problem goes away it just means that the mod is the cause of your issue.
Click to expand...
Click to collapse
ok forget the 1+1. is this a problem on any 4.4.4 roms?? I ran banstalk and had similar issues with the dialer not working?
mcernuto said:
ok forget the 1+1. is this a problem on any 4.4.4 roms?? I ran banstalk and had similar issues with the dialer not working?
Click to expand...
Click to collapse
dialer is working fine for me, it worked like it should on Beanstalk, aokp, slimfast, liquidsmooth, candykat, pac. are you doing a full wipe before flashing?
EDIT: can you take a screenshot and post the image?
dzee206 said:
dialer is working fine for me, it worked like it should on Beanstalk, aokp, slimfast, liquidsmooth, candykat, pac. are you doing a full wipe before flashing?
EDIT: can you take a screenshot and post the image?
Click to expand...
Click to collapse
yea I always do full wipes before flashing...I don't have a screen shot to take it just does it sometimes when I make a call...
mcernuto said:
yea I always do full wipes before flashing...I don't have a screen shot to take it just does it sometimes when I make a call...
Click to expand...
Click to collapse
Hmm just did a quick search in the cm11 thread and seen this http://forum.xda-developers.com/showpost.php?p=55196642&postcount=305 maybe you just need the right modem/radio installed.
mcernuto said:
yea I always do full wipes before flashing...I don't have a screen shot to take it just does it sometimes when I make a call...
Click to expand...
Click to collapse
Dzee could be correct about the modem… even if you have that modem. Go ahead and flash the modem zip in recovery. Wipe cache and dalvik. I even wipe cache and dalvik before rebooting.
The reason i say to flash it over itself if you already have it is because im wondering if you have been on stock jb before. You see.., ics and jb have a different partition layout and as ive said to others. You really should odin the stock jb to get those partitions correct before flashing any jb or kitkat roms.
But because of the specific way a zip flashes its contents. You maybe able to get away with just flashing the modem zip itself..and not have to mess with a one click exe or odin. Im not even sure if we have any one clicks here… but using odin and the stock firmware would be enough to correct the issue..if the modem doesnt work.
Atleast this is my take on your situation.

Cynogenmod 11

So guys, I have finally rooted my s3 (international version) after the warranty expired a week ago.
Have installed CWM and am in a search of ROM for it now.
For now I have decided to flash CM 11, but have few doubts about it:
Should I install m9 snapshot or m10 snapshot? I read it on reddit that m10 is not stable, so should I go for m9 instead for now?
And the zip file from their official site is around 212 MB, so does this zip file contain gaaps? If no, then where can I find the gaaps file for cm 11 m9 snapshot version?
I am kinda new to these things so sorry for being so noob.
And since I am flashing a rom for the first time, do I need to do anything else other than these steps:
1. Backup current rom using recovery.
2. Copy the zip file of the cm 11 rom in SD card.
3. Reboot into recovery, clear data, clear cache and clear dalvik cache.
4. Flash rom and gaaps(if not included in rom).
Any help regarding the above post
deepanshuchg said:
Any help regarding the above post
Click to expand...
Click to collapse
Only stock roms come with gapps.
You need to do some reading before you start playing.
http://forum.xda-developers.com/galaxy-s3/help/frequently-questions-t2148708
http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125
I have actually read a lot about it, have done all the prerequisite steps (nandroid backup, efs folder backup etc), have downloaded cm 11 m9 and gaaps for it, now the only thing that is stopping me from flashing is rootSU post here which says:
"Note that Cyanogenmod is very controversial for the international version of the S3, there are technical issues, and newer stable version is always behind, I would NOT go for Cyanogenmod at the moment.."
So should i go ahead and flash cm 11? What do you guys suggest. I know i am being too preventive but this is my first time so i think this is understandable.
deepanshuchg said:
I have actually read a lot about it, have done all the prerequisite steps (nandroid backup, efs folder backup etc), have downloaded cm 11 m9 and gaaps for it, now the only thing that is stopping me from flashing is rootSU post here which says:
"Note that Cyanogenmod is very controversial for the international version of the S3, there are technical issues, and newer stable version is always behind, I would NOT go for Cyanogenmod at the moment.."
So should i go ahead and flash cm 11? What do you guys suggest. I know i am being too preventive but this is my first time so i think this is understandable.
Click to expand...
Click to collapse
That was made 2 years ago. Ignore that and flash cm if you want to give it a try. Countless number of us use it no problems. If you don't like it you can always flash something else.
Thank you for your reply. So alright I will flash cm now, and will keep you updated about my experience of flashing my first rom. Lol.
deepanshuchg said:
Thank you for your reply. So alright I will flash cm now, and will keep you updated about my experience of flashing my first rom. Lol.
Click to expand...
Click to collapse
Good luck. I have only ever used CM so I think you will be impressed.
Darke5tShad0w said:
Good luck. I have only ever used CM so I think you will be impressed.
Click to expand...
Click to collapse
To OP
Its funny how I am in the Exact same postion as you. I have CRM recovery and thinking about CM, I have downloaded the Snapshot. verison and hopefully will be flashing my first ever ROM today or tomorrow. Let me know how it goes for you please
DARK - Can i ask which CM verison and build are you CURRENLTY using? and how do you find it?
and quick question.
I see in some youtube vidoes ( I understand we wipe cache/dalvik/partion) but some people do something like Mount/ system thingy? Do I HAVE TO do that? as some vidoes DON'T do it?
Thank You
Krisshp said:
To OP
Its funny how I am in the Exact same postion as you. I have CRM recovery and thinking about CM, I have downloaded the Snapshot. verison and hopefully will be flashing my first ever ROM today or tomorrow. Let me know how it goes for you please
DARK - Can i ask which CM verison and build are you CURRENLTY using? and how do you find it?
and quick question.
I see in some youtube vidoes ( I understand we wipe cache/dalvik/partion) but some people do something like Mount/ system thingy? Do I HAVE TO do that? as some vidoes DON'T do it?
Thank You
Click to expand...
Click to collapse
Have successfully flashed CM 11 M9 snapshot, and everything is good as of now.
And I also didn't mount anything, just follow the simple steps ( wipe data, cache, dalvik cache, flash rom and gaaps), and everything should go fine.
deepanshuchg said:
Have successfully flashed CM 11 M9 snapshot, and everything is good as of now.
And I also didn't mount anything, just follow the simple steps ( wipe data, cache, dalvik cache, flash rom and gaaps), and everything should go fine.
Click to expand...
Click to collapse
tHANKS How much FREE RAM do you get in CM11 Snapshot.
I will be doing the EXACT Same thing as you today or tomorow .
but I have a question , I'm stuck
How did you BACK UP your EFS folder/file?
I cant back it up suing the APP KTool Hack?
There is not much difference in free ram, but that should not be a problem I guess.
And for tha efs I actually used a app called Samsung tool (there is thread here on xda, go ahead and search it, else I will provide you tha link once I get on pc.) But after I read about k-tool, I even used it to backup it again and it worked for me fine. So you can try Samsung tools or may be some expert can help you in this regard.
Sent from my GT-I9300 using Tapatalk
deepanshuchg said:
There is not much difference in free ram, but that should not be a problem I guess.
And for tha efs I actually used a app called Samsung tool (there is thread here on xda, go ahead and search it, else I will provide you tha link once I get on pc.) But after I read about k-tool, I even used it to backup it again and it worked for me fine. So you can try Samsung tools or may be some expert can help you in this regard.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I am trying to find Samsung tool
Another last question I promise and sorry to distrub you.
How does the Phone FEEL? after CM11 ? Better? faster? have you enabled ART?
Thank
deepanshuchg said:
Have successfully flashed CM 11 M9 snapshot, and everything is good as of now.
And I also didn't mount anything, just follow the simple steps ( wipe data, cache, dalvik cache, flash rom and gaaps), and everything should go fine.
Click to expand...
Click to collapse
Hey!!!!!! THANKS!!!
I USED Samsung TOOL
I JUST PUT THE FIRST EVER ROM ON MY PHONE!!!!!!
IT WORKS!!! :d
Im so happy I didn't screw anything lol!!!
How are you finding it?
only 1 stupid thing I got charged for a GPS because my phone automatic used mobile data!
CM11 Snapshot, is like Normal Stock Andriod. Has a few new things? like DPS and some terminal setting - Not sure.
It felt a bit laggy ,first but then speeded up.
WAHOOOO I GOT KITKAT!!!
Lol nice.
For me it wasn't laggy at all, buttery smotth. And yes as of now I haven't found any drastic changes, although haven't used phone much after updating but still I don't think my battery life is gonna improve :/ So most probably would be dead soon, will have to research on it though but thats out of topic now
Android operates differently to windows so the theory about free ram doesn't apply here.
deepanshuchg said:
Lol nice.
For me it wasn't laggy at all, buttery smotth. And yes as of now I haven't found any drastic changes, although haven't used phone much after updating but still I don't think my battery life is gonna improve :/ So most probably would be dead soon, will have to research on it though but thats out of topic now
Click to expand...
Click to collapse
Hello, so how are you finding it, after a week?
Unfortunatly, I am now trying to find a new ROM
The problem I have is the battery life, is TERRIBLE
I lost 10% on stand by over night
how about you?
Krisshp said:
Hello, so how are you finding it, after a week?
Unfortunatly, I am now trying to find a new ROM
The problem I have is the battery life, is TERRIBLE
I lost 10% on stand by over night
how about you?
Click to expand...
Click to collapse
Don't blame the rom. Install betterbatterystats and find the actual cause.
can someone give me a mirror to download the today cm11 nightly?
Falfa_31 said:
can someone give me a mirror to download the today cm11 nightly?
Click to expand...
Click to collapse
Are you unable to download from cyanogenmods servers?

Categories

Resources