[Q] Returning to Stock -please help- - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

I have read through the forums for the last two days trying to figure out how to get my tab back to stock and cant seem to find any links that are current (or unbroken). Can some one please point me in the right direction to a stock rom image? My note 10.1 gt-n8013 wont boot up at all after a recent update. I do have access to the recovery screen and the download target screen but I cant get my computer to run odin (it recognizes the device but fails connection set up every time). I re installed all drivers on my windows 7 laptop but it looks like I will have to load onto the memory card to get anything to work. Thanks in advance for any help and please don't hesitate to ask questions if I have left any needed info out.

First of all, you are in the wrong forum. This one is for the Galaxy Tab 10.1, which is very much different from your Galaxy Note 10.1. The correct forum is here: Galaxy Note 10.1 forum
But anyway
Go to http://www.sammobile.com/firmwares/, create a profile (press the "join"-button in the upper right corner), and then search for GT-8013. Pick the first firmware on the list. This will take you to a download page that contains the firmware. Download it :good:
Then go download Samsung KIES to install the correct drivers. Grab it here Be sure to download the correct version (not the one for the Note 3)
Since you don't specify which version of Odin you use, I suggest you download version 1.85 from the second post in this thread
Now you have all you need.
Make sure you have USB-debugging enabled and reboot to download mode.
Make sure KIES is not running, kill the process in windows task manager.
Start up Odin, preferably run it as administrator, and connect your device to your PC.
Select the downloaded firmware in the PDA box and press start :good:
You should now be on stock firmware
And shame on you for posting this in the development section too!

thanks so much for the info. sorry, wont make that newb mistake again! no wonder nothing was working!

Related

[Q] Read all the posts I can find and I still can't flash with odin! Please help!

Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.

Successfully rooted Galaxy Player 4.0 YP-GB1 (Korean Version)!!

I wanted to post how I rooted my Samsung YP-GB1 for those that are having trouble. My galaxy is the Korean version, 16gb, 2.3.6 stock firmware, and has the KRKPC kernel.
1). Check your kernel in the about device section. It should have KRKPC in the title. Then go here to download the modified stock kernel:
(pspmaster.tistory.com/120)(your looking for build 39 at the bottom of the page).
2). Make sure the system drivers are installed, by simply connectiong to kies. Kies will install the drivers automatically when you connect your device to it. then make sure kies is closed before continuing.
3). Download odin3 and unzip and run program.
4). Make sure "Auto Reboot & "F.Reset Time" are checked. Check the box next to "PDA" and click the "PDA" button. This will allow you to locate the new downloaded kernel on you computer and load it!
5). Now before connecting your galaxy to your computer put it in download mode first. Hold the power, volume down, and home button at the same time. Once you see the downloading screen connect your device to your computer.
6). Once your device is connected, you will see a yellow box appear in the first "ID:Com" box in the odin software. You are now ready to click start!
7). Click start and let it do it's magic. The galaxy will reboot automatically after lots of text appear on the screen.
8). Then go to the "play Store" and download the "Tegrak Kernel" app. Open and scroll down to "enable rooting." Allow superuser permission and your done!
I would recommend if your new to this going to youtube and searching for "how to flash a kernel" and watch some tutorials before trying. Also, thanks to Tegrak and the developers who put so much time into making our android experience just that much better!!
Please remember I am not a developer and am not resposible if you mess your device up! I searched the forum for quite some time and asked questions before trying this, so please do the same if you feel reluctant to try!
This is tegrak's blog
Sent from my galaxy s using XDA
I am very keen to root my Korean yp-gb1 32Gb device.
I would try the method suggested by the OP but in 'About device' and under 'Build number' it says "GINGERBREAD.KRKPH", which is different from the one stated.
My 'Firmware version' is 2.3.6 and the 'Kernel version' is 2.6.35.7.
I unsuccessfully tried 'superoneclick' and 'DoomLoRD's rooting programs. Then I learnt somewhere in the forums that the kernel needed flashing before this device could be rooted.
Would it be safe to try the procedure that this thread is dedicated to?
Can I get some help please?
question
may Kernel is KRKPH how can i root it

Root SCH-R760

Hey I have a SGS2 but its a generic handset from ACG. Its similar to USCC device but my kernel is completely different than any others on the web. If I use ODIN to flash a custom Kernel in my device will it result in data loss or any other harm? I am still kind of lost as to what using ODIN to flash a custom kernel will do to my device other than put CWM and SuperUser on my device.
I would also like to know this. I also have a SCH-R760.
I actually ran through the rooting method, and the Kernel didn't touch the Radio. I didn't have LOS, and I am running Jelly Bean on my device now. You can follow the links in my signature below =]
nice, if you need the stock ever shoot me a pm, and I can get it uploaded.
If anyone is just wanting stock root, it can be found HERE.
could someone please help me asap, im an amateur tech geek and well i tried rooting my phone and i downloaded the wrong kernel and now my phones stuck in airplane mode, no hardware info or baseband info please help me ! DD:
-uscc galaxy s ii sch-r760
thankyou
DakotahRay said:
could someone please help me asap, im an amateur tech geek and well i tried rooting my phone and i downloaded the wrong kernel and now my phones stuck in airplane mode, no hardware info or baseband info please help me ! DD:
-uscc galaxy s ii sch-r760
thankyou
Click to expand...
Click to collapse
If you can get it in download mode, do a one click Odin back to stock and start over. For my phone I use EL29. Usually if you can get it to Samsung screen, it is only soft bricked and fixable. Good luck!
Install the Galaxy S 2 Drivers
Driver Download
On your phone, select USB Debugging and Unknown Sources from the Settings menu.
(unknown sources located in the application tab in settings at the very top and usb debugging located in the application tab in settings in under development).
Plug your phone into your computer with the USB Cable that came with it.
Download this easy rooter tool
Epic 4G Touch Auto Fixer
Run the e4auto-sfx.exe (aka Root and download mode placer)
Press E then Enter.
Then press H then Enter on your keyboard then press any button to continue.
Your phone will now reboot into download mode. (green android guy that with a downloading bar)
Download Odin if you don't already have it
Odin Download
Download this Stock SCH-R760 File
Stock Download
Select the PDA Option on your Odin and flash it.
This will restore your device to factory default settings. From there you might need to flash your carrier files into the phone since this will restore it 100% back to factory settings.
If you have more questions I am here to help.
feyerbrand said:
Install the Galaxy S 2 Drivers
Driver Download
On your phone, select USB Debugging and Unknown Sources from the Settings menu.
(unknown sources located in the application tab in settings at the very top and usb debugging located in the application tab in settings in under development).
Plug your phone into your computer with the USB Cable that came with it.
Download this easy rooter tool
Epic 4G Touch Auto Fixer
Run the e4auto-sfx.exe (aka Root and download mode placer)
Press E then Enter.
Then press H then Enter on your keyboard then press any button to continue.
Your phone will now reboot into download mode. (green android guy that with a downloading bar)
Download Odin if you don't already have it
Odin Download
Download this Stock SCH-R760 File
Stock Download
Select the PDA Option on your Odin and flash it.
This will restore your device to factory default settings. From there you might need to flash your carrier files into the phone since this will restore it 100% back to factory settings.
If you have more questions I am here to help.
Click to expand...
Click to collapse
Hey, I have a generic sch-r760. I already managed to root but I am wanting to install a custom kernel with cwm attached. Need to get a recovery on the thing and I'm looking for ROMs as well but if I can at least get a kernel with cwm I'll be on the right path
I am sorry to be 'That guy'... But this is not the right place at all for this question.
If there is a forum for the device in question, you need to go there and ask the question. If not you need to go to http://forum.xda-developers.com/forumdisplay.php?f=456 and ask the question there.
If a noob comes in here and does anything on there E4GT from this post, they will be very unhappy.
I have asked a MOD to move the post to avoid confusion.
graydiggy said:
I am sorry to be 'That guy'... But this is not the right place at all for this question.
If there is a forum for the device in question, you need to go there and ask the question. If not you need to go to http://forum.xda-developers.com/forumdisplay.php?f=456 and ask the question there.
If a noob comes in here and does anything on there E4GT from this post, they will be very unhappy.
I have asked a MOD to move the post to avoid confusion.
Click to expand...
Click to collapse
Thanks, I had been trying to locate the correct spot so I keep doing searches on the model number commenting and hoping someone can help out and tell me where km suppose to be:good:
Thread moved to Android Q&A since it didn't belong in the Epic 4G Touch but doesn't seem to have its own forum.
Thanks for your understanding on this matter.
~ The-Captain
coltlacey1 said:
Hey, I have a generic sch-r760. I already managed to root but I am wanting to install a custom kernel with cwm attached. Need to get a recovery on the thing and I'm looking for ROMs as well but if I can at least get a kernel with cwm I'll be on the right path
Click to expand...
Click to collapse
This guide works great for the SCH-R760x even though this is a US cellular site
Root Guide with CWM and no Triangle.
Team US Cellular posted some good stuff for this phone on their website. Haven't seen any mirrors on XDA yet
http://teamuscellular.com/Forum/files/file/140-stock-ics-with-root/

New to android, need help

hello guys I bought my first android fone, S3,
it was preinstalled with 4.1.1 version I updated to 4.1.2 using kies but it only changed the version, I was hoping it would format everything and would start my s3 from brand new stage but it didn't, I want to know how can I install 4.1.2 thru pc and it installs the rom from scratch and s3 should boot like its out of box.
kindly tell me step by step which files I need and how to do it.
and like I said im new to android so I have no idea what to search in this forum.
thanks.
***NOTICE***
Before doing this do a back up in the recovery menu, search Xda if you aren't sure how. I'm not liable for any bricked, whether soft or hard, devices. Only use your DEVICE SPECIFIC ROMs and/or Kernels.
***NOTICE***
First off, Google Odin, download and install it and download and install your phones drivers to your computer, search on the forum for the KERNEL SPECIFIC Stock ROM for your S3, there are TUTs on Xda here on how to find out which one is for you, now, once you have the ROM downloaded normally its in .zip format, run Odin as administrator, right click it and select run as administrator, now, plug your phone into your computer and put it into download mode, Volume +/- and power at the same time until you see a yellow triangle, now press the Volume + button to continue, after that look in Odin to make sure you have the yellow COM number, you'll know if you have it, its highlighted yellow and says "COM:4" the number doesn't matter and may be different, if you don't have the COM number then re-install your phone drivers, now, open the Stock ROM .zip file and extract it to your desktop, open Odin and click PDA,now select the .tar file for the Stock ROM and press start and Wa-La, your phone should re-boot in approximately 10 seconds if all goes well.
Hope this helps.
**Current Setup**
AT&T SGH-i777 Galaxy SII
Android 4.2.1
Running CM 10.1 Nightly
ARMv7 Processor rev 1 (v71)
**Previous Setup**
AT&T HTC Inspire 4G
Running CM 9 Nightly
mostwant said:
hello guys I bought my first android fone, S3,
it was preinstalled with 4.1.1 version I updated to 4.1.2 using kies but it only changed the version, I was hoping it would format everything and would start my s3 from brand new stage but it didn't, I want to know how can I install 4.1.2 thru pc and it installs the rom from scratch and s3 should boot like its out of box.
kindly tell me step by step which files I need and how to do it.
and like I said im new to android so I have no idea what to search in this forum.
thanks.
Click to expand...
Click to collapse
BASICS Faqs and Guides read first .
http://forum.xda-developers.com/showthread.php?t=1927113
jje

[Q] Unroot - Recovery Mode- Download mode

Ok
Trying to Unroot.
But today I have this giantic issue.
My recovery mode just doesnt appear anything like before.
I have tried unrooting using a Root_Remover.zip file. But I can't find at all the "install zip" menu in recovery mode I had when I had to root it first ! Now it just wont appear at all. I only have :
Reboot system Now
Apply update from external Storage
Wipe Data/Factory REset
Wipe Cache Partition
and nothing more. I even tried the second menu (apply update from ext.stor.) but im not using any external storage.
I thought "all right, Ill get through it with ODIN >>> WRONG !!!!!! No download mode ...
So right now I'm completely screwed since theres no way I can perform an unroot under such conditions.
Please someone help me out with this, sorry for being a bit too straightfoward but after 72h spent on that @#%? I find it pretty unrelevant that this ****ing menu wont show the hell up. Even though I guess Im just doing something wrong, I need help.
EDIT : All right. So I figured out most tutorials are written by incompetent people whom mostly release pseudo tutorials that are just here to show the world that they can perform this or that, but in fact, can't take a single second to make a point where you don't get access to DOWNLOAD MODE the same way on a Tab2 than with a S2 -_-. We don't enter DOWNLOAD mode the same way ... geez ... so I figured out that using the Up volume button instead of the down volume button would eventually get me there. Which it did. Come on ... how is it possible that after 15 tutorials, not ONE did mention that ?
Also, ODIN doesn't want to do @#%? right now. I browsed the right firmware, plugged my tab to my laptop ... hit START and it ends in 5 seconds after "all thread completed (0 succeed/0 failed)
I've tried multiple stock firmwares (all the same but form different locations or mirrors) and ... nothing. So ...
First, please clarify these couple of questions. What device do you have? What version of recovery do you have? And one more out of curiosity. Where did you get that root remover zip?
Sent from my GT-P7500 using Tapatalk 4
Most of the tutorials are written for the GT-P75xx. Being that it's also the device for the section you posted this rant in, I can see why the tutorials were not what you needed. Just my two cents but condemning the authors of the tutorials will most likely get you very little help. Not to mention this section isn't for your device.
Sent from my GT-P7510 using XDA Premium HD app
Benzoman said:
Most of the tutorials are written for the GT-P75xx. Being that it's also the device for the section you posted this rant in, I can see why the tutorials were not what you needed. Just my two cents but condemning the authors of the tutorials will most likely get you very little help. Not to mention this section isn't for your device.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Don't know what happened to my last reply but anyway :
All the threads I read were for Tab2 p51xx or SII.
As explained in first reply (which disappeared), I had and have my damn good reason to condemn people who spam the net with their useless blogs. Won't waste time explaining again a reason which won't certainly arent interested in. But it was costy in term of $.
That said I then realized XDA still exists so I launched a quick google search and fell on this subboard. Reading "Samsung Tab 10.1", unfortunatly didn't mean to me it is a seperated sub forum from the Samsung tab2 10.1. My bad ... do I have to get this thread transfered to the right place or admins will find it useless ?
_____________
My ROM is none. I unrooted but didn't install any ROM. After that I simply figured out I don't need one. But today I need to upgrade to anything above 4.0.4 after the very bad experience I had late friday eve which is quite costy.
I have one more minor trouble I didn't speak of in my first post :
I bought my tablet in September 2012 in the Netherlands GT P5110, ICS 4.0.4. So after checking on the XDA page where all of the stock firmwares are listed, I realized there is no "perfect" match. The only firmware for the Netherlands and for P5110 is from April 2012 and ICS 4.0.3, not 4.0.4 ; yet it is the one I downloaded. Should I get another one ?
About the Root remover, I uploaded to my tab one I downloaded from a website which I can't recall or find on google right now because I downloaded two from two different websites and only remember this one : www techbloggerzone com/2012/09/how-to-unroot-galaxy-tab-2-101-gt html [dots for WWW | COM and HTML were removed since I'm not allowed to post external links yet]
I think there's nothing else missing, but tell me if there is.
IMPORTANT EDIT : I just realized the factory usb plug I have for the Samsung must be damaged. It charges on sector, but isn't identified properly on my laptop and thus won't let me connect it by wire. Didn't figure this out earlier as I did all transfers by Kies wifi. Damn ... but it only explains why Odin can't upload anything to my tab, not why I can't use find the zip install option in Recovery mode for the root_remover.zip
As already stated you're in the wrong place but we all try to help each other here...but no more rants or you might find a stoney silence will be your only reply....
Problem with Odin is more likely laptop drivers and/or windows version and not your cable...
Samfirmware has many 4.0.4 roms for your "area", they have a 4.1.2 version for Netherlands and 4.0.4 for Belgium, Luxembourg etc. As long as you find an XX version it will have Dutch language option.
The recovery you described when you eventually got into it sounded like stock recovery so you wouldn't be able to choose and flash zip from there
Calm down, take a deep breath, get your laptop and drivers sorted first or you'll not get anywhere... Did you have a yellow indication with com port number in the Odin window, if not it is surely drivers. Does windows in any way recognise the tab when connected? (warning tone, does device manager show anything?)
sent from my still superb Google I/O 7510 (xda hd)
stinky73 said:
As already stated you're in the wrong place but we all try to help each other here...but no more rants or you might find a stoney silence will be your only reply....
Problem with Odin is more likely laptop drivers and/or windows version and not your cable...
Samfirmware has many 4.0.4 roms for your "area", they have a 4.1.2 version for Netherlands and 4.0.4 for Belgium, Luxembourg etc. As long as you find an XX version it will have Dutch language option.
The recovery you described when you eventually got into it sounded like stock recovery so you wouldn't be able to choose and flash zip from there
Calm down, take a deep breath, get your laptop and drivers sorted first or you'll not get anywhere... Did you have a yellow indication with com port number in the Odin window, if not it is surely drivers. Does windows in any way recognise the tab when connected? (warning tone, does device manager show anything?)
sent from my still superb Google I/O 7510 (xda hd)
Click to expand...
Click to collapse
I thought I had all my drivers updated (for the samsung tab, installed like two or three weeks ago), so if it's about drivers, then I don't get it . I checked that in the first place. The cable sometimes fails the connection to my laptop, but today it just won't work. :/. Windows recognizes the device as an external object which can't properly install and such connect (yellow pop up message in right corner, over the task bar). I do not exactly undersatnd what you mean by a yellow indication with "com port" number in the Odin window, but I don't think I had that ... in fact I'm pretty sure about it.
If it's just about drivers, where can I go to find the latest ?
Try looking in Samsung site for drivers here http://www.samsung.com/us/support/
What version of odin are you using? Would recommend 1.3 for the tab 2.
The indication of com port in odin is as in attached image, if you haven't got that then the computer is not recognising your tab, either because of drivers, or cable, but as we've said, you should start with the drivers, probably by downloading the latest from Samsung, deleting all drivers you have at the moment then re-installing.
If the tab is not recognized by the computer then programs like odin cannot do anything as they use the computers' usb bus...
stinky73 said:
Try looking in Samsung site for drivers here
What version of odin are you using? Would recommend 1.3 for the tab 2.
The indication of com port in odin is as in attached image, if you haven't got that then the computer is not recognising your tab, either because of drivers, or cable, but as we've said, you should start with the drivers, probably by downloading the latest from Samsung, deleting all drivers you have at the moment then re-installing.
If the tab is not recognized by the computer then programs like odin cannot do anything as they use the computers' usb bus...
Click to expand...
Click to collapse
Thank you very much !! I was using Odin 1.85 and Odin 3.7 (used 1.85 for rooting), I'll try a downgraded version.
Keep you in touch if problems are resolved or not after that. Thank you again.

Categories

Resources