hi when i want to flash my phone with flastool i did every thing but when i plug my neo v into flashmode he do that but after seconds he leave it so can u please help me
brad182 said:
hi when i want to flash my phone with flastool i did every thing but when i plug my neo v into flashmode he do that but after seconds he leave it so can u please help me
Click to expand...
Click to collapse
Have you installed ADB and flashmode driver for Neo V on your computer?:sillyJust ask...)
XII KAITO said:
Have you installed ADB and flashmode driver for Neo V on your computer?:sillyJust ask...)
Click to expand...
Click to collapse
i installed flashmode drivers but adb idont understand
brad182 said:
i installed flashmode drivers but adb i dont understand
Click to expand...
Click to collapse
You need to install 3 drivers :
Neo V Driver (ADB)
Flashmode drivers
Fastboot drivers
1-are you doing all these stuff on windows 8 ?
cuz its different to install adb fastboot and flashmode drivers
flash tool may not recognize your phone
2-in log does it say "ending flash session" and pauses there and nothing happens ?
hossein7292 said:
1-are you doing all these stuff on windows 8 ?
cuz its different to install adb fastboot and flashmode drivers
flash tool may not recognize your phone
2-in log does it say "ending flash session" and pauses there and nothing happens ?
Click to expand...
Click to collapse
Mate I think the flashtool drivers in windows 7 & 8 is the same but the problem in windows 8 is the USB 3.0 driver...
For windows 8 user they need to change the USB 3.0 driver as here:
http://forum.xda-developers.com/showthread.php?t=2256359
Related
How to get Fastboot working in Windows 8 with the Xperia S? Somebody already got it working?
I installed PC Companion, Flashtool, Android SDK+adb. Everything works: I can connect through adb. Flashtools works in flashmode.
EXCEPT: fastboot...
Fastboot just won't see any device in Windows 8. How to fix this?
On my other computers/OSes it works without problems.
cognosco said:
How to get Fastboot working in Windows 8 with the Xperia S? Somebody already got it working?
I installed PC Companion, Flashtool, Android SDK+adb. Everything works: I can connect through adb. Flashtools works in flashmode.
EXCEPT: fastboot...
Fastboot just won't see any device in Windows 8. How to fix this?
On my other computers/OSes it works without problems.
Click to expand...
Click to collapse
got the same problem on my xperia ray
I had this problem earlier.
Well windows 8 does allow unsigned fastboot drivers to get installed. I'm assuming u r installing drivers from file in flashtool folder.
Follow the procedure in This link to disable driver signatures.
Reboot system after procedure done, then install the fastboot drivers they should work fine.
iamsuperuser said:
I had this problem earlier.
Well windows 8 does allow unsigned fastboot drivers to get installed. I'm assuming u r installing drivers from file in flashtool folder.
Follow the procedure in This link to disable driver signatures.
Reboot system after procedure done, then install the fastboot drivers they should work fine.
Click to expand...
Click to collapse
Thnx it worked!
iamsuperuser said:
I had this problem earlier.
Well windows 8 does allow unsigned fastboot drivers to get installed. I'm assuming u r installing drivers from file in flashtool folder.
Follow the procedure in This link to disable driver signatures.
Reboot system after procedure done, then install the fastboot drivers they should work fine.
Click to expand...
Click to collapse
Thank you, this method worked!
(Previously I disabled the driver enforcement through the command shell with 2 commands. But apparently that did not work.)
Hi
i tried with the metod above but it didn't work. can you help me? The phone enter in fasboot mode but after 5 seconds exit from it.
Solved: Use usb 2.0 port of your PC.
4lex96 said:
Hi
i tried with the metod above but it didn't work. can you help me? The phone enter in fasboot mode but after 5 seconds exit from it.
Solved: Use usb 2.0 port of your PC.
Click to expand...
Click to collapse
if i don't have any usb2.0. How can i do?
4lex96 said:
Solved: Use usb 2.0 port of your PC.
Click to expand...
Click to collapse
YOU ARE GOD!!
Was struggling with this for the last 2 months. Just had to plug it in another port! BOOM!!
THanks a ton @4lex96
GH0ST DR0NE said:
YOU ARE GOD!!
Was struggling with this for the last 2 months. Just had to plug it in another port! BOOM!!
THanks a ton @4lex96
Click to expand...
Click to collapse
It's a pleasure. If any moderator put this discussion in relief would be better :highfive:
Hi guys , sorry for my english. Im n00b. im trying to unlock bootloader on my u20i but flashtool cant find any drivers like a ADB, flashmod and fastboot. Do u have any ideas ? i tried search it on google but nothing. thank you so much.
!_XperiaFan_! said:
Hi guys , sorry for my english. Im n00b. im trying to unlock bootloader on my u20i but flashtool cant find any drivers like a ADB, flashmod and fastboot. Do u have any ideas ? i tried search it on google but nothing. thank you so much.
Click to expand...
Click to collapse
Try to install the drivers that are in the /drivers folder where you installed flashtool, otherwise install Sony Update Service or PC Companion to get the proper drivers for your phone. Fastboot is not supported on the U20, so choose flashmode for anything you want to do.
SmG67 said:
Try to install the drivers that are in the /drivers folder where you installed flashtool, otherwise install Sony Update Service or PC Companion to get the proper drivers for your phone. Fastboot is not supported on the U20, so choose flashmode for anything you want to do.
Click to expand...
Click to collapse
Yes i did these things. i plug device to pc , everything workss good , i get run bootloader -> i must unplug the device -> press back and plug in. After that log writes 'cancelled' no drivers atd. :/
Well, I've been trying to install a custom ROM on my Xperia Sola, but it won't go into fastboot
Tried this: http://forum.xda-developers.com/showpost.php?p=26875204&postcount=4
I've managed to install usb drivers on my phone using this, but it still won't go into fastboot
Any help?
Edit:
Just to be clear... blue LED is fastboot right?
cause its always purple, then when I try to activate fastboot it goes blue for half a second, then goes purple again
SrebX said:
Well, I've been trying to install a custom ROM on my Xperia Sola, but it won't go into fastboot
Tried this: http://forum.xda-developers.com/showpost.php?p=26875204&postcount=4
I've managed to install usb drivers on my phone using this, but it still won't go into fastboot
Any help?
Edit:
Just to be clear... blue LED is fastboot right?
cause its always purple, then when I try to activate fastboot it goes blue for half a second, then goes purple again
Click to expand...
Click to collapse
Install latest flashtool easiest way ( Google it) than install the driver (go to directory where flashtool installed and open the driver folder then run the exe file,be sure you tick three option ' fastboot flashmode and your phone')
Sent from my xperia sola using xda premium
MUHAMMAD KHALIL said:
Install latest flashtool easiest way ( Google it) than install the driver (go to directory where flashtool installed and open the driver folder then run the exe file,be sure you tick three option ' fastboot flashmode and your phone')
Sent from my xperia sola using xda premium
Click to expand...
Click to collapse
Still same outcome :\
I even tried rebooting into fastboot using the flash tool, still the LED is purple [tried to recognize it using command prompt from fastboot... doesn't work either]
SrebX said:
Still same outcome :\
I even tried rebooting into fastboot using the flash tool, still the LED is purple [tried to recognize it using command prompt from fastboot... doesn't work either]
Click to expand...
Click to collapse
Which windows are u using?? If xp then then it won't help much
And plz reinstall usb chipset drivers on ur computer and then install drivers for u p sola go n flashmode and fastboot drivers
This shall work
drsanket_xperia_u said:
Which windows are u using?? If xp then then it won't help much
And plz reinstall usb chipset drivers on ur computer and then install drivers for u p sola go n flashmode and fastboot drivers
This shall work
Click to expand...
Click to collapse
Windows 7
And I have no idea how ... I didn't use the standard method either for this, I opened it from the device manager like explained in the link from the 1st comment ...
How do I reinstall the chipset?
SrebX said:
Windows 7
And I have no idea how ... I didn't use the standard method either for this, I opened it from the device manager like explained in the link from the 1st comment ...
How do I reinstall the chipset?
Click to expand...
Click to collapse
First try this
Go to folder where flashtool is installed lets suppose C drive
So its like
C/flashtool/driver
U r in drivers folder
Now click on what u see
Select fastboot and flashmode and also select the name of ur xperia
And just install
Then retry entering into fastboot ( make sure u have run flashtool app before connecting in fastboot)
drsanket_xperia_u said:
First try this
Go to folder where flashtool is installed lets suppose C drive
So its like
C/flashtool/driver
U r in drivers folder
Now click on what u see
Select fastboot and flashmode and also select the name of ur xperia
And just install
Then retry entering into fastboot ( make sure u have run flashtool app before connecting in fastboot)
Click to expand...
Click to collapse
I've tried this
My phone's LED turns purple, then the flashtool says it's in fastboot mode [Which isn't, cause it should be blue, right?]
And to check I want to fastboot folder,tried to check with command prompt if he recognizes my deice, and he didn't :\
while in that condition [Purple LED, flashtool says fastboot] I tried to press power+volume up. The LED Turned blue for about 1 second, then went purple again and then red [rebooting itself into charging mode]
Thanks for the help by the way
SrebX said:
I've tried this
My phone's LED turns purple, then the flashtool says it's in fastboot mode [Which isn't, cause it should be blue, right?]
And to check I want to fastboot folder,tried to check with command prompt if he recognizes my deice, and he didn't :\
while in that condition [Purple LED, flashtool says fastboot] I tried to press power+volume up. The LED Turned blue for about 1 second, then went purple again and then red [rebooting itself into charging mode]
Thanks for the help by the way
Click to expand...
Click to collapse
M talking about led bar
I dun knw u r connecting it properly or not
Phone is off
U keep the volume up button pressed and attach the usb
Thats it, u r doing the same, right?
And plz if possible try reinstalling ur usb chipset drivers for ur computer
And then reinstall fastboot flashmode drivers
drsanket_xperia_u said:
M talking about led bar
I dun knw u r connecting it properly or not
Phone is off
U keep the volume up button pressed and attach the usb
Thats it, u r doing the same, right?
And plz if possible try reinstalling ur usb chipset drivers for ur computer
And then reinstall fastboot flashmode drivers
Click to expand...
Click to collapse
Yes, thats what I'm doing
And how do I reinstall the usb chipset?
U might be having a driver cd wid ur lappy or pc
Or a driver folder where u pc drivers are kept
drsanket_xperia_u said:
U might be having a driver cd wid ur lappy or pc
Or a driver folder where u pc drivers are kept
Click to expand...
Click to collapse
Have managed to do it ... still same outcome :\
Thanks again for the help by the way
Any help on this? I'm stuck :-\
Sent from my HTC One X using xda app-developers app
Try different USB port and make sure driver is installed.
Install the PC Companion, then connect the phone and let the phone install the drivers needed (When the pop up appears on the phone, select ok).
See if that works. This phone has a problem with Windows 7.
Otherwise, if you have a windows XP phone, you can get into fastboo there.
My experience - if your phone is "Bootloader Unlock Allowed = No", then you cannot access fastboot mode, only Flash mode. That's my experience from XU
same problem with xperia go
rado77 said:
My experience - if your phone is "Bootloader Unlock Allowed = No", then you cannot access fastboot mode, only Flash mode. That's my experience from XU
Click to expand...
Click to collapse
i think you may be right im in xperia go and i dont have unlocked bootloader allowed... and i cant get to fastboot mode either
rado77 said:
My experience - if your phone is "Bootloader Unlock Allowed = No", then you cannot access fastboot mode, only Flash mode. That's my experience from XU
Click to expand...
Click to collapse
I have this exact problem.
I can enter flashmode, but not fastboot mode.
I believe I have rooted my phone however.
Here's a video of me attempting to set it in fastboot
Somebody please help!!
Hi , when i connect my phone to pc via fastboot blue led appears , but pc recognizes my lww as Sony ADB interface ....
Flashtool says : 09/028/2013 21:28:14 - ERROR - Drivers need to be installed for connected device.
09/028/2013 21:28:14 - ERROR - You can find them in the drivers folder of Flashtool.
I reinstalled drivers but problem still exists ... any solutions ?
before i connected it to pc it said s1tool flasher or something like that and fastboot was working properly ...
please help me i cant change kernel without fastboot and i want to try another roms ...
try installing every driver from the drivers folder.
Okay, i will try it tommorow thanks
Odoslané z WT19i cez Tapatalk 2
restart pc after driver installation. that's better
Is urs win 8? If yes. http://forum.xda-developers.com/showthread.php?t=2181363
No, I have windows XP
Odoslané z WT19i cez Tapatalk 2
Pietro007 said:
No, I have windows XP
Odoslané z WT19i cez Tapatalk 2
Click to expand...
Click to collapse
Try installing pcc it will have more drivers, but make sure pcc is off before u flash with fashtool
Don't forget to hit thanks
Installed all drivers , installed PCC but problem still exists PCC is turned off before flashing
Pietro007 said:
Installed all drivers , installed PCC but problem still exists PCC is turned off before flashing
Click to expand...
Click to collapse
Heard this from somewhere, it's worth a shot.
Put phone in mtp, connect, it will install drivers then put it in msc and then try
Don't forget to hit thanks
where i can see this option in cyanogen mod 7 ? i cant find it
Simplest solution - just don't use flashtool for fastboot. Download android-sdk and install platform-tools. Follow this guide from step 9 - http://unlockbootloader.sonymobile.com/instructions
It will 100% work.:good:
Also, you should have posted in the Q&A section.
its not working
installed android SDK, platform tools , copied android_winusb.ini .... but when i try to connect via fastboot it asks for drivers and i installed it but it says that i have latest drivers... its not workiiing (
can you send me better guide with screenshots or something like that ?
It worked in past good ... but now its not working
Okay, first maybe you want to delete your current flashtool, then just install latest flashtool version
Then check all the drivers and install it
If still not working, maybe you want to uninstall your current fastboot driver:
Right-click My Computer, click Manage, and then click Device Manager.
Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager.
find S1Fastboot driver under other devices (i think... i forgot), right click and uninstall
After that just reinstall all the driver again from the fastboot folder
maybe it will work, correct me if im wrong
*)if still didn't work, just try to do it on other pc
in device manager , i cant find the s1fastboot driver ... isnt there but i installed all the drivers but they arent here
it works on other pc ... thanks .. but on this pc it dont work... on second pc i installed all drivers and it works... here i installed same drivers and it dont work
Pietro007 said:
in device manager , i cant find the s1fastboot driver ... isnt there but i installed all the drivers but they arent here
Click to expand...
Click to collapse
I think your phone should be connected to the pc to show it in device manager
I have installed Walkman Experience Elite ROM (4.0.4) and it shows kernel 3.0.8.
The problem is, I can not get into fastboot!
I turn it off, hold Vol+Up and plug in USB, but the blue LED appears only for a couple seconds, then goes off and the phone just continues charging.
I installed Android SDK stuff and I couldnt use it to fastboot CM10 boot.img. I tried Flashtool, AND I installed the drivers.
(Note in case it matters (don't think so): at first I downloaded fastboot drivers alone and installed, but after installing Flashtool those may have been newer drivers, I tried to install them too but it said I already have)
Even after installing the drivers my Xperia U showed no signs of working fastboot, and PC still couldn't recognize it in fastboot.
I had problems installing the drivers, as I found out - because of Windows 8.1, but I got through that.
Another question: Does Xperia U change from ST25a to ST25i depending on kernel/ROM or something? (I have ST25a)
Please help!
I tried to follow this guide:
http://forum.xda-developers.com/showthread.php?t=2447283
But at step 8 it doesn't recognize it as S1 fastboot device.
Why does nobody help? ;(
2Radon said:
Why does nobody help? ;(
Click to expand...
Click to collapse
Maybe because the is no answer.
Have you tried the guide in flashtool FAQ?
ChikeD said:
Maybe because the is no answer.
Have you tried the guide in flashtool FAQ?
Click to expand...
Click to collapse
flashtool FAQ has guide for windows 8, but it's not working on windows 8.1
ShinChven said:
flashtool FAQ has guide for windows 8, but it's not working on windows 8.1
Click to expand...
Click to collapse
windows 8.1 is not developer friendly