Related
I just got off the phone with a Verizon rep and they confirmed that there are no network outages in LA. So I guess there's something wrong with my phone. I'm currently running the debloated OTA rom with the radio that comes with it. I can intermittently connect to 4G, but only the upstream seems to work. It randomly cuts out, bumping my internet off or dropping me to 3G and 1X. Does anyone have any insight into this?
lolipear said:
I just got off the phone with a Verizon rep and they confirmed that there are no network outages in LA. So I guess there's something wrong with my phone. I'm currently running the debloated OTA rom with the radio that comes with it. I can intermittently connect to 4G, but only the upstream seems to work. It randomly cuts out, bumping my internet off or dropping me to 3G and 1X. Does anyone have any insight into this?
Click to expand...
Click to collapse
Well I think you were lied to,they have been messing with the network in several market over the last few days,if flashing different radios doesnt fix your problem it has to be the network, in sioux city iowa the same thing had been going on ask day, they are getting ready to switch the 4g on, it happened in three twin cities yesterday when they expanded the coverage, can't always believe what the reps tell you
Sent to you via my handheld cellular communications device
The rep seemed like an honest dude, but I guess there could be sneaky network changes and upgrades. It might also be hardware damage. Does anyone about the 4G antennas on the back cover of the Thunderbolt? Does anyone know where I can get a replacement? A ticket has been opened for some techs to check out the network in my area. I'll keep you all updated.
You're sure your network mode is on CMDA / EvDo + LTE?
Positive. I can't think of anything else except network issues or hardware damage. :\
I am still in sioux city and the network is flippin out,give it a day befor you go buying hardware
Sent to you via my handheld cellular communications device
Good call on that one. 4G is up and running when I leave the apartment. The strange thing is I have basically full 4G reception outside of the apartment, but inside: no 4G, but full 3G. Such is life, I guess.
I've been having this problem probably once a day since I've gotten the phone where my phone will lose data signal while switching between 3G and LTE and the only way to get data back is to restart the phone. Turning airplane mode on and off won't work either.
Ive had that issue too..but most of the time it switches back n forth no problem
bik2101 said:
I've been having this problem probably once a day since I've gotten the phone where my phone will lose data signal while switching between 3G and LTE and the only way to get data back is to restart the phone. Turning airplane mode on and off won't work either.
Click to expand...
Click to collapse
Sent from my ADR6425LVW using XDA App
I haven't noticed any data problems until today. I am unable to connect to 3G. We do not have 4G in my area.
These problems are probably bugs in the LTE System.
Sent from my Galaxy Tab 10.1
jbh00jh said:
These problems are probably bugs in the LTE System.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
why should bugs in the LTE system affect 3G?
the 3G our phones use is not exactly the same as standard 3G unless you force your phone into EVDO 3G via the ##778 menu. which if you are not in a 4g zone I would recommend simply for stability. The 3G our phones use is basically a layer between 3G and LTE as I've had it explained to me.. I really don't know much else about it though, sorry. I'm sure someone else here can shine more light on it however.
racingtiger03 said:
the 3G our phones use is not exactly the same as standard 3G unless you force your phone into EVDO 3G via the ##778 menu. which if you are not in a 4g zone I would recommend simply for stability. The 3G our phones use is basically a layer between 3G and LTE as I've had it explained to me.. I really don't know much else about it though, sorry. I'm sure someone else here can shine more light on it however.
Click to expand...
Click to collapse
oh that's really interesting. thanks for that little bit of info. had no idea.
Same problem with it dropping data signal and never coming back without restart. At least now i know its not a hardware issue
I've had the same problem lately
~John
damn.. i was actually hoping this was a small problem with a simple solution... everything else about the phone is perfect except for this one problem.
Having the same issue here....when switching to cdma I get no 3G just 1X.....hope they find a fix soon
Sent from my HTC Rezound
same here guys. call Verizon and let them know. I think it helps if a bunch of us make them aware.
I've had a ton of weird data issues with the Rezound. I get 1x where i should get 3g, i get 3g where i should get 4g and i get nothing way too often.
I've only had this happen once with the rezound. Shows nothing but bars, no data can be used. Sometimes switching to 3g or 4g in lte on/off helps.
Had this problem intermittently on both my wife's and my bolts, completely agree its just a lte being a new tech issue.
I've listened to a podcast on how the handoff works and its definitely not fool proof.
racingtiger03 said:
the 3G our phones use is not exactly the same as standard 3G unless you force your phone into EVDO 3G via the ##778 menu. which if you are not in a 4g zone I would recommend simply for stability. The 3G our phones use is basically a layer between 3G and LTE as I've had it explained to me.. I really don't know much else about it though, sorry. I'm sure someone else here can shine more light on it however.
Click to expand...
Click to collapse
Im in Lawton Oklahoma and I'm not gonna c 4G till 2013 and I'll be pcs before that.
Now I access the ##778 menu in edit mode and what do I do to force EVDO 3G?
Rocking and Loving My Unbelievable Crazy ReZound
Dial ##778#, call
edit mode
password is 000000
modem settings
Rev. A
select "enable"
menu > commit
phone will reboot and you should get 3G back
This changes your network from eHRPD back to EVDO Rev.A. For LTE phone owners, eHRPD causes 3G to die (most of the time anyway) when the LTE network has problems. Get back on normal EVDO and you're good to go.
^ from Jntdroid on another forum (not sure if we're allowed to post to other forums here) I'm not positive on where he got it from, but this is a capability of all HTC 4G phones
I've had occasional issues with being down to 1X, but even that was only during nationwide 4G network issues, definitely get in touch with VZW about that... not that they have enough sense to fix anything *sigh*
Data Connection slow to Acquire (3G/LTE)
If I'm on the subway, or somewhere with no service, then come above ground, I get voice (full bars) but no data -- it could take upwards of 3 minutes+ for data to come back up. Any thoughts?
I've been losing my 3G service throughout my city, being restricted to 1x so many times lately where I SHOULD be getting 3G!(4G isnt available in my area yet). It's really annoying...perhaps nexus isnt theeee only one...
^should I try calling and programing what the user implied? Again, I am not in a 4G area...
not2gutta said:
I've been losing my 3G service throughout my city, being restricted to 1x so many times lately where I SHOULD be getting 3G!(4G isnt available in my area yet). It's really annoying...perhaps nexus isnt theeee only one...
^should I try calling and programing what the user implied? Again, I am not in a 4G area...
Click to expand...
Click to collapse
Same issue as you. I live in a 3G area only and my 3G drops out a lot. Even a reboot doesn't get it back. Not sure what to do :/
I see that you can now, in CM9, force roaming but i only seem to get 1x speeds. I'm not sure if thats just because im in a low coverage area for verizon? I saw screenshots Joker posted of him getting 1mb+ on verizons network with CM9. Anyone know if he was running a new PRL or if it was just CM9 that allowed this? Huge thanks to Joker and all involved with their amazing work with the Photon and CM9!
Could be area and how close to the connected tower. Wish I could remember the Web page but you could with the connection info see the tower you were connected to look at the maps and see how far it was from you..
I used to do this all the time with my old VZW air card.. It was interesting because you may be a closer antennae or tower but the device would insist on the further of the two. The cool thing was being able to try forcing it to one over the other..
Not sure about cm9 but there has to be a way to bring up the connection info.. DBm, tower number, etc.. Could be some pound code to access it?
This is a standard function of CM. I haven't yet tried the CM9 alphas, but on my evo I was using CM7 and put my network onto automatic all the time at work so I could pick up a decent VZW signale, instead of my crap Sprint one in the building. Sometimes I would get great speeds, sometimes not.
I ended up just flashing a Sprint "business" PRL that allows 3g roaming onto Verizon, they *supposedly* only allow 1x roaming for normal users. I tried putting network to auto on CM7 on my Photon and it didnt do anything, however since ive flashed to CM9 on Photon it switches right over to Verizon's tower and i now, due to the new PRL, jump right to 3g Verizon(where there is 3g, obviously) And to tell what cell tower i'm on, I use an app called "OpenSignal" its in the market for free and has done well for me for a while now.
Cool thanks for sharing will have to checkout OpenSignal.
w0lf215 said:
I ended up just flashing a Sprint "business" PRL that allows 3g roaming onto Verizon, they *supposedly* only allow 1x roaming for normal users. I tried putting network to auto on CM7 on my Photon and it didnt do anything, however since ive flashed to CM9 on Photon it switches right over to Verizon's tower and i now, due to the new PRL, jump right to 3g Verizon(where there is 3g, obviously) And to tell what cell tower i'm on, I use an app called "OpenSignal" its in the market for free and has done well for me for a while now.
Click to expand...
Click to collapse
How did you flash the prl? I was on 11115 then flashed to cm7 which gave me the 51083 prl. I can't seem to get cm7 into the right mode to flash the prl. All the posts on the web are for the evo. And those folks have to go back to stock to change the prl. I am stuck with the 1x roaming as well.
This tool allows me to force roam on cm7 but I believe that my prl is limiting me to 1x.
http://forum.xda-developers.com/showthread.php?t=1422952
Sent from my MoPho. All typos are the phones fault.
You can roam on 3g with the regular prls.
w0lf215 said:
I ended up just flashing a Sprint "business" PRL that allows 3g roaming onto Verizon, they *supposedly* only allow 1x roaming for normal users. I tried putting network to auto on CM7 on my Photon and it didnt do anything, however since ive flashed to CM9 on Photon it switches right over to Verizon's tower and i now, due to the new PRL, jump right to 3g Verizon(where there is 3g, obviously) And to tell what cell tower i'm on, I use an app called "OpenSignal" its in the market for free and has done well for me for a while now.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
I ended up restoring(via nandroid backup) to a stock blur rom from right after i unlocked/rooted my device and was able to follow THIS guide to get the PRL 01115 to flash to my Photon. Once i flashed PRL i just restored(again via nandroid) back to my CM9 backup. You will need your MSL, if you dont have it just call Sprint and tell them you need to do a data profile reset and need the 6 digit code and they give it out no questions as long as you play dumb and don't call it the MSL. And thanks for reply Joker! But i was out other day with some buddies(who are on verizon) and they were getting good 3g verizon speeds and i forced to roam on verizon and couldn't get over like 16k down(this was before i flashed new PRL). And in Settings - About Phone - Status it showed i was on 1x roaming, even though we were in a great 3g zone for verizon. Idk if that was a fluke or what but now that im on this 0115 business PRL i see flying speeds when force roaming. Cant thank you enough for all the amazing work you've done!
So do a nandroid back to stock and then nandroid back to cm7/9? Where is the prl info located that it would not change with a nandroid restore? I'm going to give of a shot and see how it goes.
Edit:
Found this:
http://forum.xda-developers.com/showthread.php?t=1263264
Sent from my MoPho. All typos are the phones fault.
It worked!
My stock nandroid would not flash (Error while flashing boot image!) so I wiped and flashed Jokerstockrev1 (nice ROM BTW) in CWM. This enabled me to enter BP tools mode and flash PRL 11115 using QPST. I nandroid'ed back to my CM7 backup and I now get 3g roaming! Not that I need this right now since I am in a Sprint saturated area, but having the option is nice when I travel to remote areas.
First of all, I live in a suburb of Dallas which is completely covered in LTE according to Sprint's coverage map and I can affirm this by Sensorly and my own personal usage of my phone when I see 4G LTE in many places. However, lately I have noticed on the bottom floor of my house I usually get 1X or 3G, whereas upstairs I get 4G quite nicely. In other houses nearby (less than 1 mile), my phone doesn't even get data many times (and if it does, it is 1X) whereas other Sprint iPhone 5's are enjoying LTE in the same location.
Now I know our phone's have connection issues, but why am I not even getting 3G? Is there anyway to help force my phone to try and get more 4G signal because I know for a fact Dallas has pretty decent 4G coverage? When my phone goes into 1X it also seems to be sucking up quite a bit of battery. Any help is appreciated!
I am running MeanBean 3.09, S-ON, with the newest Bulletproof Kernel.
007math said:
First of all, I live in a suburb of Dallas which is completely covered in LTE according to Sprint's coverage map and I can affirm this by Sensorly and my own personal usage of my phone when I see 4G LTE in many places. However, lately I have noticed on the bottom floor of my house I usually get 1X or 3G, whereas upstairs I get 4G quite nicely. In other houses nearby (less than 1 mile), my phone doesn't even get data many times (and if it does, it is 1X) whereas other Sprint iPhone 5's are enjoying LTE in the same location.
Now I know our phone's have connection issues, but why am I not even getting 3G? Is there anyway to help force my phone to try and get more 4G signal because I know for a fact Dallas has pretty decent 4G coverage? When my phone goes into 1X it also seems to be sucking up quite a bit of battery. Any help is appreciated!
I am running MeanBean 3.09, S-ON, with the newest Bulletproof Kernel.
Click to expand...
Click to collapse
MeanBean has the Roam only option baked in, just go to settings - mobile network and set it up... The battery drain is "normal" when the phone doesn't have a good signal... Roam or use wifi... I know it doesn't make sense but that's the now network...
Sent from my EVO
I'm at my wits end and am hoping someone could have an answer for my problem. My home's in the L.A./O.C. area and the local towers were recently upgraded. This has made my phone use ERHPD (I believe that the upgrade is only a software overlay) since 4G was not upgraded. Basically I'm in a 3G/1x speed zone. I'm stock 4.4.2 and towel rooted with roam control. If I go out into the street and force roam to Verizon's network, I'll get 4 to 6gb download speed. On Sprints network, I'm stuck on 3G with 0.20 dl speed. When I force to Verizon's network, (goes to 4G) and then switch back to Sprint, my Sprint speed will be on 4g (with 1/2 the dl speed of Verizon). I tested both networks by streaming a movie and no buffering with Verizon and just a little buffering while on Sprint 4g. Once I walk into the house my phone drops to 3g again and 50% of the time will time out when trying to speed test or Google anything. Go out into the street get slow 3g. Force roan to Verizon and back to 4g. Once on Verizon 4g I can turn off roam and Sprint will be at 4g then (but a slower speed than Verizon). This is an improvement over the consumer prl that was on the phone originally. I'm using 2 different corp. prls for sprint which allows me to get the above stated speeds. Consumer prl sucked big time. I'm wondering if flashing a Verizon radio to my N3 would allow me to pick up the 4g signal that Verizon phones are getting good speed with and or change over to a Verizon prl?
Another test/example done today while in the San Bernardino mountains.
Standing next to my neighbor who has Verizon NOTE3 and is getting 4g. Speed test showing 4mb upload. My Sprint Note3 download speed 0.13. Tried it with 2 corp. and 1 stock prl.
Is this a junky radio on SPRINT or do I need to use a custom Verizon PRL to get and maintain 4G on my Sprint Note 3? Could the speed connectivity issue be solved with a radio change? Maybe a Verizon radio?
Any help/direction is greatly appreciated,
I know speed and connectivity are a big issue with Sprint in a lot of areas right now and maybe the answers will be able to help the dozens of people I've seen looking for answers.
antilamr said:
I'm at my wits end and am hoping someone could have an answer for my problem. My home's in the L.A./O.C. area and the local towers were recently upgraded. This has made my phone use ERHPD (I believe that the upgrade is only a software overlay) since 4G was not upgraded. Basically I'm in a 3G/1x speed zone. I'm stock 4.4.2 and towel rooted with roam control. If I go out into the street and force roam to Verizon's network, I'll get 4 to 6gb download speed. On Sprints network, I'm stuck on 3G with 0.20 dl speed. When I force to Verizon's network, (goes to 4G) and then switch back to Sprint, my Sprint speed will be on 4g (with 1/2 the dl speed of Verizon). I tested both networks by streaming a movie and no buffering with Verizon and just a little buffering while on Sprint 4g. Once I walk into the house my phone drops to 3g again and 50% of the time will time out when trying to speed test or Google anything. Go out into the street get slow 3g. Force roan to Verizon and back to 4g. Once on Verizon 4g I can turn off roam and Sprint will be at 4g then (but a slower speed than Verizon). This is an improvement over the consumer prl that was on the phone originally. I'm using 2 different corp. prls for sprint which allows me to get the above stated speeds. Consumer prl sucked big time. I'm wondering if flashing a Verizon radio to my N3 would allow me to pick up the 4g signal that Verizon phones are getting good speed with and or change over to a Verizon prl?
Another test/example done today while in the San Bernardino mountains.
Standing next to my neighbor who has Verizon NOTE3 and is getting 4g. Speed test showing 4mb upload. My Sprint Note3 download speed 0.13. Tried it with 2 corp. and 1 stock prl.
Is this a junky radio on SPRINT or do I need to use a custom Verizon PRL to get and maintain 4G on my Sprint Note 3? Could the speed connectivity issue be solved with a radio change? Maybe a Verizon radio?
Any help/direction is greatly appreciated,
I know speed and connectivity are a big issue with Sprint in a lot of areas right now and maybe the answers will be able to help the dozens of people I've seen looking for answers.
Click to expand...
Click to collapse
You could try and change the radio to Verizon, but I think that would conflict with the Sprint version of the OS you have in the device. Then what happens when you are in an area that the roles are reversed, and Sprint has the dominant tower ? Do you have a different internet connection in the house that you can pull WiFi from ? A friend of mine had a similar problem the house was a dead zone. So she complained to Sprint and they gave her a router that produces a WiFi signal for internet and provides a signal for phone calls for her old Sprint EVO 4G. This way she never has to manually have to switch her device connections when leaving home for work. Don't know if this will help in your case, but might be worth a try.
jimzweb1 said:
You could try and change the radio to Verizon, but I think that would conflict with the Sprint version of the OS you have in the device. Then what happens when you are in an area that the roles are reversed, and Sprint has the dominant tower ? Do you have a different internet connection in the house that you can pull WiFi from ? A friend of mine had a similar problem the house was a dead zone. So she complained to Sprint and they gave her a router that produces a WiFi signal for internet and provides a signal for phone calls for her old Sprint EVO 4G. This way she never has to manually have to switch her device connections when leaving home for work. Don't know if this will help in your case, but might be worth a try.
Click to expand...
Click to collapse
Sprint gave me an Air Wave which I use at my work since it's in a dead zone also and I need cell signal to do my job.
Because I have one already, Sprint won't give me another one for use at my house. There's no internet or wifi at the mountain cabin. Only signal available there is cell if you're on the right provider. Thanks for the suggestion. I was thinking of flashing to a Verizon radio when I go to the mountains and re-flash it back to Sprint after I return. I'd have to do this every weekend and am not sure if it would get me kicked off of Sprint for roaming to much on Verizon. I'm also unsure if flashing the radio would actually give me good Verizon signals, and unsure if Sprint could be able to tell if I was using a different radio.
Update,
After researching some more I tried going to airplane mode for 30 seconds and back. This has my phone connecting to 4g when outside the house. Once I walk inside the signal fades and it goes to 3g in the house. Not needing to roam on Verizon to make it go into 4g. 3g data is only .03mb in the house when I can get the speed test to connect. Still no useable data speed in the mountains.