Hi there i was hoping that somebody could help me out with my problem. Yesterday i made my flyer succesfully S-off and a perm rooting. I installed the custom rom from 【7/19/2011】【ROM】[Flyer] Stock ROOTED Full Phone Support, also succesfully. Now there was a new custom rom today and i wanted to install it on my flyer, i reset it to factory settings before installing the custom rom. The back up from Clockworkmod from the factory rom was on my sd card. As u might guess he didnt want to install the custom rom (that i copied to the sd card), if i put it in hboot/fastboot it shows with the green letters that it is reading the sd card but says the zip file is not good. If i want to boot in recovery it shows the white screen with the green htc letters on it and it doens show the menu of Clockworkmod. Is there a way to solve this or is it possible to install Clockworkmod new again? The flyer is permanently rooted and s-off.
thank u
Check this link out.
http://forum.xda-developers.com/showthread.php?p=14693680
I have a Evo 3d, hboot 1.50 latest radios, prl, pri. I had OMJ's latest Rom, and used Flash Image Gui to flash a custom Kernel package; I flashed Tiamuts "Tiamat_E3D-v1.1.0-Sense" http://downloads.tiamat-dev.com/8x60/110/Tiamat_E3D-v1.1.0-Sense.zip, and rebooted, then my phone was locked up on just the HTC screen.
I can still access the Bootloader, and Fastboot, and Recovery. I tried rolling back to my nandroid backup, and also reflashing the stock kernel through recovery (as the Rom won't ully load), and now all I get is a black screen after the HTC logo, and the phone is responsive to power and capacitive buttons, but no display at all.
Tried full wipe, and reflash of OMJ, even CleanRom.... Just black screen after HTC logo.... Any Ideas ? With Bootloader, Fastboot, and Recovery, you'd think I could unbrick, but no luck.
I'm sorry... I'm not a complete noob, I've been on the scene since early TP2s, and always rooted and custom rom’ed my Evo 4g.... Please help guys. Thanks in advance.
blckout99 said:
I have a Evo 3d, hboot 1.50 latest radios, prl, pri. I had OMJ's latest Rom, and used Flash Image Gui to flash a custom Kernel package; I flashed Tiamuts "Tiamat_E3D-v1.1.0-Sense" http://downloads.tiamat-dev.com/8x60/110/Tiamat_E3D-v1.1.0-Sense.zip, and rebooted, then my phone was locked up on just the HTC screen.
I can still access the Bootloader, and Fastboot, and Recovery. I tried rolling back to my nandroid backup, and also reflashing the stock kernel through recovery (as the Rom won't ully load), and now all I get is a black screen after the HTC logo, and the phone is responsive to power and capacitive buttons, but no display at all.
Tried full wipe, and reflash of OMJ, even CleanRom.... Just black screen after HTC logo.... Any Ideas ? With Bootloader, Fastboot, and Recovery, you'd think I could unbrick, but no luck.
I'm sorry... I'm not a complete noob, I've been on the scene since early TP2s, and always rooted and custom rom’ed my Evo 4g.... Please help guys. Thanks in advance.
Click to expand...
Click to collapse
Since you're on the HTC unlock method, in order for the custom recovery to properly work, i.e. flash all partitions including the kernel/boot partition, you have to access the custom recovery differently than the traditional method.
The proper command and method to access the custom recovery in order for the HTC unlock method to grant it write access to the kernel/boot partition is through fastboot. The full command is: fastboot boot c:\cwm-recovery.img . Once you've temporarily fastboot booted the custom recovery, you can then properly flash a ROM or restore a nandroid as both will be allowed write access to the kernel/boot partition.
Appreciate your support in using my application! Hope that helps!
Deleted my own question. I think I found a thread where it will be more appropriate.
Like joeykrim stated, you must access the recovery from fastboot to be able to flash kernels, nandroids and what not from recovery if you used HTC's method to unlock you phone. You are not bricked. It is fully fixable.
I have Clockwork Recovery flashed, always have (the only version compatible with Hboot 1.50, v4.0.1.4). I still have full access to the Bootloader, Customer Recovery, and Fastboot. But despite reflashing a fresh Rom (2 in fact), full wipes, reflashing boot.img with stock kernel; all the phone will do is boot past the HTC screen, vibrate, and the screen goes black. Capacitive buttons are responsive, and so is the power button, just no display. ...... Idk what else to Flash to get this phone booting again, any ideas ?
I had same problem I have 1 file name PG86IMG.zip I don't remember from where I downloaded 1st Iplaced this on SD root folder and turn on phone with volume down and power button and it care of everything
Sent from my PG86100 using XDA App
blckout99 said:
I have a Evo 3d, hboot 1.50 latest radios, prl, pri. I had OMJ's latest Rom, and used Flash Image Gui to flash a custom Kernel package; I flashed Tiamuts "Tiamat_E3D-v1.1.0-Sense" http://downloads.tiamat-dev.com/8x60/110/Tiamat_E3D-v1.1.0-Sense.zip, and rebooted, then my phone was locked up on just the HTC screen.
I can still access the Bootloader, and Fastboot, and Recovery. I tried rolling back to my nandroid backup, and also reflashing the stock kernel through recovery (as the Rom won't ully load), and now all I get is a black screen after the HTC logo, and the phone is responsive to power and capacitive buttons, but no display at all.
Tried full wipe, and reflash of OMJ, even CleanRom.... Just black screen after HTC logo.... Any Ideas ? With Bootloader, Fastboot, and Recovery, you'd think I could unbrick, but no luck.
I'm sorry... I'm not a complete noob, I've been on the scene since early TP2s, and always rooted and custom rom’ed my Evo 4g.... Please help guys. Thanks in advance.
Click to expand...
Click to collapse
You arent bricked if you can still get into fastboot, recovery, etc. I would recommend using this app called Flash Image GUI on the market, it's only $0.99 and I am (as we speak) flashing ziggy's dual core kernel. Oh wait my phone rebooted now. Its fast as all get out and my WiFi works (yay). But like I said this method is the EASIEST way to flash kernels!
up7up said:
I had same problem I have 1 file name PG86IMG.zip I don't remember from where I downloaded 1st Iplaced this on SD root folder and turn on phone with volume down and power button and it care of everything
Click to expand...
Click to collapse
I think the file you're referring to is the RUU (ROM Update Utility) file which can be placed in the root of the sdcard as PG86IMG.zip and flashed to competely reload all stock software (radios, system, kernel, etc) on the device.
These files are available at http://goo-inside.me/shooter/ruu.
blckout99 said:
I have Clockwork Recovery flashed, always have (the only version compatible with Hboot 1.50, v4.0.1.4). I still have full access to the Bootloader, Customer Recovery, and Fastboot. But despite reflashing a fresh Rom (2 in fact), full wipes, reflashing boot.img with stock kernel; all the phone will do is boot past the HTC screen, vibrate, and the screen goes black. Capacitive buttons are responsive, and so is the power button, just no display. ...... Idk what else to Flash to get this phone booting again, any ideas ?
Click to expand...
Click to collapse
Seems as if there is some issue with the display. If you confirm you have adb access to the device, I would think the issue lies in the android /system. If you don't have adb access, I would think the issue lies in the kernel/ramdisk.
Either way, if you want to eliminate both issues, reflash my Stock ROM - [ROM] joeykrim-original-1.2.0 Odex *Stock Rooted 2.08.651.2*, which will reload the stock kernel and the stock system with only adding in root access. I run this ROM as my daily ROM and it works great for keeping the phone stock but allowing root access.
Make sure to access the custom recovery through, fastboot boot c:\android\cwm-recovery.img . If you load the custom recovery through adb reboot recovery, or bootloader and selecting recovery from the menu, the HTC unlock method will not grant recovery write access to the kernel/boot partition.
Worse case, my stock ROM with stock Kernel doesn't resolve the display issue, you should flash the stock RUU files at http://goo-inside.me/shooter/ruu . If that doesn't resolve the issue, you'll prob need to exchange/return the device as it would seem to be a hardware issue.
Hope that helps! Good luck!
hi my incredible s went dead i want to recover it again but when i boot it up in hboot and chose recovery a red triangle apears and nothing happens
i know that the ruu roms can be installet via an exe file through the hboot so is there a recovery i can flash through hboot usb ?
i used revolutionary to root it not i can not get into the phone i get stuck at the htc boot screen i only need a recovery so i can revert and fix the problem
Flash a custom recovery via fastboot. Use this: http://forum.xda-developers.com/showthread.php?t=794638 to flash it.
thanks i hope this does the job
worked out just fine at first i tryied many different recovery images
but the thing that worked was the clockworkmod recovery image for my phone
after that i succesfuly recovered to a backed up rom
then quickly flashed 4ext and boom back in bussines
so thanks for the help hope that other guy i saw a few weeks ago with same problem sees this
Phone: EVO 3D hboot 1.5
What happened: I've been running and liking ScottsROM's CleanRom Reborn. Today I decided to try a few things. I used the Flash Image GUI app to flash TWRP 2.0 recovery. All seemed well with that. I was able to boot into recovery and reboot back to normal with ease and no issues. So I decided to try one of the Kushdeck's ICS Alpha roms just to see what it was like (knowing I was going to go right back to CleanRom since the camera still doesn't work in the Alpha ICS roms). So I boot into TWRP Recovery and perform a backup. Once it's done I reboot and open the Flash Image GUI app and install (as per joeykrim's instructions on using this app) the Kernal from the new ICS Deck Rom then boot into TWRP recovery to install the rest of the rom. I'm up and playing with ICS in a few minutes and all is smooth. After playing in ICS for a while I decide to go back to my CleanRom (the one I backed up before starting any of this), so I reboot back into TWRP recovery and clear all my caches and dalviks and also perform a wipe. After that's complete I then chose the restore option and let it do its thing. Once that finishes (no errors reported when it finished) I rebooted. Usually when booting up on CleanRom it goes straight into the CleanRom Boot animation screen. However here's where my problem begins (continue below):
Problem: Instead of getting the CleanRom Boot Animation I get the white HTC screen/Green HTC logo and after that clears the screen goes black(but still backlit) and the capacitive buttons at the bottom stay all lit up but that's it. Nothing else happens. Tried going back into recovery and clearing all caches again and re-restoring again but it just did the same thing...
Any advice or suggestions as to what I should do next? I'm currently redownloading CleanRom Reborn (since I'm at work) and was going to just try reinstalling the rom again.
phone wont load after restoring a back up
this happen to me when i was running lee's rom and i decided to flash warm's rom and i used the g u i flash tool to flash the kernal and every thing when well then boot into recovery and to flash the rom and the flash went well also and it booted up and played around with it and decided i didnt like it and i went back to lee's rom and what do you know im stuck in a boot loop and then i found out that some how i lost my boot.img so im willing to bet you have lost your's aswell so what you have to do is what ever rom you flashed i hop you have a back up copy of the zip of that rom on your laptop or desktop and extract the contence of that zip folder and it will create another folder now with in that folder you will see a boot.img this is what you need to to get your evo to boot up you will need to copy the boot.img file into the folder that you used to root your evo should be on your c drive then open up camand promt and typ fastboot flash boot boot.img and press enter and you have your evo 3d back enjoy
Hello , thank you for reading this. I'm trying to fix my amaze, it's stuck on the HTC boot logo. Phone was running latest tmobile rom, i unlocked the bootloader and rooted it to remove some tmobile bloatware using bloat freezer. Well the phone kept having these weird problems so i looked to install a custom rom. I installed clockworkmod recovery and then put my downloaded rom which was in a ZIP file onto the sd card. I booted into recovery, made a backup, then wiped data, then wiped dalvick cache or w/e it's called. wiped partition, then installed the ROM. the initial setup went good, phone said successful boot but when i restart it stays on the boot logo. So after some reading it looks like i didn't flash the kernel. So i found the boot.img file in the rom zip file but now i'm not sure what to do with it. I can boot into recovery but that is it. How can i flash the kernel with just clockwork recovery mod? Please help! I obviously would really like to get my phone up and running.
So as of now i have some custom roms on the SD card along with the OEM Ruby rom. I tried installing the tmobile stock ruby rom and it just says install aborted and it can not install. What should i do now? I juts want to get the phone working now. Thanks
Install 4ext recovery, it will flash the kernel for you, just make sure to turn on smartflash in the settings before you flash a rom if you're still S-On. If you're S-Off, then no need for smartflash
andy55 said:
Install 4ext recovery, it will flash the kernel for you, just make sure to turn on smartflash in the settings before you flash a rom if you're still S-On. If you're S-Off, then no need for smartflash
Click to expand...
Click to collapse
thank you. is there a way to install 4ext when the phone is just in recovery mode? my phone is just at the clockwork recovery main home screen right now. i can mount the drive and put files on the phone but that is it. thanks again
Okay so the tmobile stock rom is on the sd card. I renamed it to PH85IMG.zip and booted into hboot mode, it found the zip package and there was a loading bar. But then it went back to the boot screen. I tried restarting and it wouldn't move past the HTC quietly brilliant screen. I tried using the all in one tool kit to flash 4ext but it just keeps saying waiting for device. Pretty sure it wont work in clockworkmod recovery. Starting to get worried
NAIAmix said:
Okay so the tmobile stock rom is on the sd card. I renamed it to PH85IMG.zip and booted into hboot mode, it found the zip package and there was a loading bar. But then it went back to the boot screen. I tried restarting and it wouldn't move past the HTC quietly brilliant screen. I tried using the all in one tool kit to flash 4ext but it just keeps saying waiting for device. Pretty sure it wont work in clockworkmod recovery. Starting to get worried
Click to expand...
Click to collapse
Too flash the T-Mobile ruu you would have to relock your bootloader first.
As for flashing 4ext with the toolkit, when it said waiting device, were you in the bootloader, or did u select fastboot?
sent from my
NRGized amaze
powered by Faux
i think he was in recovery. ok so flash 4ext with the toolkit (i think you need to be in fastboot for the toolkit to flash it). then go to tools(in 4ext recovery) scroll down till the end and make sure smart flash is enabled (when it says enable smart flash means its not enabled and you need to click that, if it says disable smart flash then dont touch it you re good). then you can install a custom rom and it wont boot loop
hope this helps
hey guys thank you so much for taking time to help me! i got it flashed with 4ext and now using smartflash i'm able to flash roms onto it. so relieved to get it working, thanks again!
NAIAmix said:
hey guys thank you so much for taking time to help me! i got it flashed with 4ext and now using smartflash i'm able to flash roms onto it. so relieved to get it working, thanks again!
Click to expand...
Click to collapse
Thanks button working? I got u covered
Sent from my SGH-T999 using Tapatalk 2