Hi guys,
Sorry guys for what might appear to be a noob question, but is there any major differences between the I9300 and I9300T model? and more importantly, will I9300 ROMs work on a I9300T model S3? or is the difference so minor that it won't really matter?
I have only just noticed that my model had the T. If someone could clear that up or shed some light on the matter, it would be greatly appreciated
Thanks in advance
I flashed it with the I9300 Italian latest rom with no issues at all. So I think they are the same, I think the network locked ones come with T, I got mine unlocked at the store where I bought it. It was Vodafone stock.
Sent from my GT-N7000 using xda premium
Barracuda77777 said:
I flashed it with the I9300 Italian latest rom with no issues at all. So I think they are the same, I think the network locked ones come with T, I got mine unlocked at the store where I bought it. It was Vodafone stock.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I'm guessing there must be some hardware difference. A different model number usually (always I think) indicates some hardware difference. Just adding a letter though, is usually the smallest difference of all.
The i9300 is capable of being locked, or at least it would seem to be considering it has menu functions for it. Could be wrong on this though, maybe it can't.
The T model is tuned to favour the 850mhz band. There is a difference in hardware but very minor. Other than that they are the same.
Just Google i9100 i9100t (S2 model) and you will find alot of info. Something about different sar value.
Anyway, as for flashing you'll have no problems. Firmwares are interchangeable. Same with the S2 but on the S2, it was better to flash a T modem afterwards for optimum reception.
Sent from my GT-I9300T using xda premium
I'm really curious about this coming from a gti9100T to a gti9300T I have found zero difference in using Tmodems vs any other
Sent from my GT-I9300 using xda premium
sxi200 said:
The T model is tuned to favour the 850mhz band. There is a difference in hardware but very minor. Other than that they are the same.
Just Google i9100 i9100t (S2 model) and you will find alot of info. Something about different sar value.
Anyway, as for flashing you'll have no problems. Firmwares are interchangeable. Same with the S2 but on the S2, it was better to flash a T modem afterwards for optimum reception.
Sent from my GT-I9300T using xda premium
Click to expand...
Click to collapse
Oh ok. The only reason I ask is because I was on Sammobile and noticed this warning which stated "Do not flash I9300T roms with your GT-I9300 device!" so was wondering if firmwares were truely interchangeable.
I've been on Slim ICS on my I9000 for a while and was looking forward to flashing it on my S3, but was unsure if it would be compatible. I've tried asking in the thread but haven't got a response and thought that mayb someone else in the community could just confirm this for me.
but also from the little reading I've done, it appears that I can flash any I9300 custom ROM on my T model S3 and will just need to flash a T modem later. If someone could just confirm this, it would make my decision to flash a custom ROM a lot easier
Thanks
ActionBastardDV said:
Hi guys,
Sorry guys for what might appear to be a noob question, but is there any major differences between the I9300 and I9300T model? and more importantly, will I9300 ROMs work on a I9300T model S3? or is the difference so minor that it won't really matter?
I have only just noticed that my model had the T. If someone could clear that up or shed some light on the matter, it would be greatly appreciated
Thanks in advance
Click to expand...
Click to collapse
The T model of the S2 had a chip in line where the non-T model had just straight through wires. I was speculated that this was some sort of band filter that attenuated the non-850Mhz bands to favour the 850MHz range.
From experience I can say that, on Telstra, the S2 T model occasionally had crap reception where a non-T model right nex to it was fine. I believe this was in areas where the Telstra 850MHz network was unavailable and it was using on of their 2100MHz towers. Eventually, afer a lot of troubleshooting and flashing different ROMs and modems, I sold the T and got the non-T model.
I would NOT under ANY circumstances get another T model unless one of these useless clowns (Samsung, Telstra, Vodafone and the likes) actually tells me in writing what the difference is.
I did a hardware comparison with my friends GS3.
He has the I9300 and I have the I9300T.
Once both phones were flashed to the same ROM (Vodafone New Zealand) using ODIN, the only difference I could find (including the hardware that were listed) was the bootloader.
I just used first 3 apps I could find when I searched "hardware info" in the Google Play Store.
They all gave me the same results saying that the only difference was the bootloader.
Also we are both on the same network (2Degrees) which uses 900Mhz.
I have yet to have a close look at attenuation to see if there is any real difference though.
charsleysa said:
I did a hardware comparison with my friends GS3.
He has the I9300 and I have the I9300T.
Once both phones were flashed to the same ROM (Vodafone New Zealand) using ODIN, the only difference I could find (including the hardware that were listed) was the bootloader.
I just used first 3 apps I could find when I searched "hardware info" in the Google Play Store.
They all gave me the same results saying that the only difference was the bootloader.
Also we are both on the same network (2Degrees) which uses 900Mhz.
I have yet to have a close look at attenuation to see if there is any real difference though.
Click to expand...
Click to collapse
oh ok, that's quite interesting. I'm not very familiar with bootloaders (it was never an issue on the I9000 for me and so don't have much experience with it), but when you say the difference was the bootloader, what do you mean exactly?
you mentioned that you both FLASHED to the same ROM (Vodafone NZ), was that through ODIN or through CWM? As I've mentioned in the OP, my main concern is whether or not I am able to flash a I9300 ROM on my I9300T S3.
I'm no rush atm, as I'm waiting for a stock Aus VAU firmware to be released as a precautionary measure before I start getting into the custom ROMS, but just wanted to know so I can start researching which ROMs to flash once I'm ready
If you could confirm whether your I9300T model was able to flash a regular I9300 custom ROM, it would be greatly appreciated. Also, if you've got any recommendations as to which ROMs are good, that would be helpful too.
Cheers
ewok666 said:
The T model of the S2 had a chip in line where the non-T model had just straight through wires. I was speculated that this was some sort of band filter that attenuated the non-850Mhz bands to favour the 850MHz range.
From experience I can say that, on Telstra, the S2 T model occasionally had crap reception where a non-T model right nex to it was fine. I believe this was in areas where the Telstra 850MHz network was unavailable and it was using on of their 2100MHz towers. Eventually, afer a lot of troubleshooting and flashing different ROMs and modems, I sold the T and got the non-T model.
I would NOT under ANY circumstances get another T model unless one of these useless clowns (Samsung, Telstra, Vodafone and the likes) actually tells me in writing what the difference is.
Click to expand...
Click to collapse
yeah I ordered mine online and didn't realise it was going to be a T model S3. If I had known, It would have most likely affected my decision to purchase the phone. From my experience on the I9000, it's always so much easier to have the full international version (more compatible ROMs, more options, more support etc) and having any variants (not sure how much of a variant the T model is) is always abit more troublesome
I'm just hoping that the I9300T is compatible with the vast majority of custom ROMs out there for the I9300, otherwise I'll be hating life for the next 2 years
you mentioned that you both FLASHED to the same ROM (Vodafone NZ), was that through ODIN or through CWM?
If you read on, just after I say that, I say "using ODIN", so yes I did it through ODIN.
If you could confirm whether your I9300T model was able to flash a regular I9300 custom ROM
Yes, I9300 ROM's can be flashed on to the I9300T. They use the same hardware AFAIK.
The only thing you need to worry about is flashing the right modem, but if your network uses the standard 900Mhz band, then you'll be right.
When I got mine they didn't tell me it was the T model, but after flashing a stock ROM instead of the branded ROM, it was fine and I didn't notice any problems.
All you need to do is flash a I9300 stock ROM then flash CF-root using ODIN to root the phone, then you can use CWM to put any ROM you want on the phone.
EDIT:
A bootloader is basically the stuff that interfaces with your hardware right at the start.
You should never touch this because if you screw up your bootloader then you can kiss your phone goodbye.
Flashing custom ROM's is safe because they never touch the bootloader, thats an entirely different procedure using ODIN.
The only reason I want to touch the bootloader is because I want to know the difference between the I9300 bootloader and the I9300T bootloader.
charsleysa said:
If you read on, just after I say that, I say "using ODIN", so yes I did it through ODIN.
Yes, I9300 ROM's can be flashed on to the I9300T. They use the same hardware AFAIK.
The only thing you need to worry about is flashing the right modem, but if your network uses the standard 900Mhz band, then you'll be right.
When I got mine they didn't tell me it was the T model, but after flashing a stock ROM instead of the branded ROM, it was fine and I didn't notice any problems.
All you need to do is flash a I9300 stock ROM then flash CF-root using ODIN to root the phone, then you can use CWM to put any ROM you want on the phone.
EDIT:
A bootloader is basically the stuff that interfaces with your hardware right at the start.
You should never touch this because if you screw up your bootloader then you can kiss your phone goodbye.
Flashing custom ROM's is safe because they never touch the bootloader, thats an entirely different procedure using ODIN.
The only reason I want to touch the bootloader is because I want to know the difference between the I9300 bootloader and the I9300T bootloader.
Click to expand...
Click to collapse
Sorry, I must have missed the fact that you mentioned you used ODIN, but thanks for confirming again.
I've done some reading through XDA already and I've gathered that some people have been flashing regular I9300 ROMs on a T model S3, but that's only through looking at their sig, which may or may not always be up-to-date, so again, thanks for confirming that too
It also appears some people using the T model have been using the regular modem, and with better results too. I'll probably try experimenting between the 2 variations of the modem and finding the best fit for myself
I think Chainfire's CF-Root is compatible for both I9300 and I9300T models, so I should be ok to root and just get straight into the custom ROMs without flashing a stock I9300 first
and thanks for that brief bootloader explanation. seems like if I get CF-Root running, I should be good to go with the custom ROMs so won't look into it too much, but it's good to have a better understanding of it.
Many thanks for all your help so far
ActionBastardDV said:
yeah I ordered mine online and didn't realise it was going to be a T model S3. If I had known, It would have most likely affected my decision to purchase the phone. From my experience on the I9000, it's always so much easier to have the full international version (more compatible ROMs, more options, more support etc) and having any variants (not sure how much of a variant the T model is) is always abit more troublesome
I'm just hoping that the I9300T is compatible with the vast majority of custom ROMs out there for the I9300, otherwise I'll be hating life for the next 2 years
Click to expand...
Click to collapse
Ok. Let me explain what I've noticed and hopefully clear things up.
I had the S1 non T and flashed the guts out of it.
Then got a T model S2. Running Optus sim. Got poor reception when I flashed an international rom + modem. Turned out all I had to do was flash a T modem anytime I flashed any custom or i9100 rom. But, as mentioned I could flash anything I wanted.
Now, I have a T model S3 with the same setup, and thought it would be like the S2. Turns out that it doesn't require a T modem for good reception. I use the lf5 modem and its just as good if not better than the T modems I've tried.
So, for the S3 flash any rom you want. If it does suffer poor reception there are plenty of T modems available in xda in cwm and Odin format. But don't think you'll need to.
Sent from my GT-I9300 using xda premium
sxi200 said:
Ok. Let me explain what I've noticed and hopefully clear things up.
So, for the S3 flash any rom you want. If it does suffer poor reception there are plenty of T modems available in xda in cwm and Odin format. But don't think you'll need to.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for clearing that up. I didn't upgrade to the S2 so was not familiar (or even aware) of there being a T variant. As such, was not sure how much of an impact that would have when flashing roms. I just knew that a lot of people had issues when flashing the I9000 roms on a variant of the S1.
But now that I know that any S3 custom rom should run fine on my T model S3, I'll start flashing once a stock AUS VAU firmware has been released (in case anything happens). I'm also using this time to see if there are any hardware faults with my device, rather than running a custom rom and finding an issue, and not be sure if it was there with the stock firmware or not.
And again, many thanks for clearing that up. I can now start searching through XDA for roms (that appear stable) and then flash once that stock firmware is released
ActionBastardDV said:
Thanks for clearing that up. I didn't upgrade to the S2 so was not familiar (or even aware) of there being a T variant. As such, was not sure how much of an impact that would have when flashing roms. I just knew that a lot of people had issues when flashing the I9000 roms on a variant of the S1.
But now that I know that any S3 custom rom should run fine on my T model S3, I'll start flashing once a stock AUS VAU firmware has been released (in case anything happens). I'm also using this time to see if there are any hardware faults with my device, rather than running a custom rom and finding an issue, and not be sure if it was there with the stock firmware or not.
And again, many thanks for clearing that up. I can now start searching through XDA for roms (that appear stable) and then flash once that stock firmware is released
Click to expand...
Click to collapse
No problem.
Earlier I saw a thread where a Vodafone Aus firmware had been added. It was in cwm format so all that needs to be done is flash and unroot + clear counter. Phone would then be stock.
Sent from my GT-I9300 using xda premium
Telecom
Hi
I bought a Galaxy S3 from Telecom NZ, and it is a 9300T.
Can I install the vodafone NZ rom, with Odin?
Cheers
Jon
jonny_winters said:
Hi
I bought a Galaxy S3 from Telecom NZ, and it is a 9300T.
Can I install the vodafone NZ rom, with Odin?
Cheers
Jon
Click to expand...
Click to collapse
Yes, I have an NZ I9300T and the Vodafone NZ ROM works fine when you flash (install as you say) it with ODIN.
Thanks for your fast reply mate!
One more question. I have rooted my phone, do I just download the NZ vodafone Rom, and flash it using Odin? That simple?
Sorry if I seem stupid lol. New to android after 3 years of Apple.
Again thank you for your help
Note: I have already download the rom was approximately 750mb in size.
Jon
jonny_winters said:
Thanks for your fast reply mate!
One more question. I have rooted my phone, do I just download the NZ vodafone Rom, and flash it using Odin? That simple?
Sorry if I seem stupid lol. New to android after 3 years of Apple.
Again thank you for your help
Note: I have already download the rom was approximately 750mb in size.
Jon
Click to expand...
Click to collapse
now start odin
reboot ur phone in download mode
volume down + home + power
connect cable
click on pda
select .tar file
u got in the download
and flash
Sent from my GT-I9300 using xda premium
Will this enable me to get better support via samsung kies? Currently my mates on vodafone and 2 degrees get updates, and I can't.
Cheers
Hi everyone,
I'd like to flash a Traditional Chinese (Taiwan) rom into my Samsung Note SGH-I717; I want the entire interface to be Traditional Chinese. Also, I'd like to unlock the phone as well. Can anyone please tell me how to do it?
PS: This is an AT&T phone that will be used overseas which is a GSM carrier.
Model #: SGH-I717
Android Version: 2.3.6
Baseband: I717UCLA1
Kernel: 2.6.35.11
Build #: GINGERBREAD.UCLA1
Much help appreciated!
Cheers
Google
RooT-4/20-BoX
shayneflashindaily said:
Google
RooT-4/20-BoX
Click to expand...
Click to collapse
I googled it but random things came up ...
Not even sure that is even possible
RooT-4/20-BoX
Why didn't you buy the international note? It supports Chinese language interface.
I didn't think too much and thought it was a quick flash. Didn't do my research
Please tell me it's possible
The rom nearest to Taiwan would be the Singapore rom. Its ICS not JB. Its what I used last year. I'm betting it would have your language pac. Its listed as N7005 Novena rom by Nunhugger.
http://forum.xda-developers.com/showthread.php?p=43165784
What model of i717 go you have? I have an international version N7000. Perhaps a trade.
bump
bump for help ...
bbumpppp
you asked if you can flash a chinese rom on your i717. i717 is for the Northern American market, and so one will not expect to find an official rom that has built-in chinese support. and since it's different from the international GN (n7000) in terms of hardwares, n7000 roms from south-east asia won't install. some have suggested the i717 is very similar to the korean version of GN and those roms can swap with i717's, but you need to google it yourself. Your best bet is to look up chinese forums and get support from enthusiasts in that region, but we know that didn't go well. so there we go.
at the end of the day, I think you are barking up the wrong tree.