[Problem] Droid 3 rebooting when screen goes off - Android Q&A, Help & Troubleshooting

Hi,
no one in droid 3 forum could help me,but I think it could be not a droid 3 problem and maybe someone could help me.
this is my question:
----------------------------
I have this strange problem on my droid 3 (I just bought it with this problem).
Every time the screen goes off it reboots.It doesn't happen only when I'm on a JB based rom.I.e,with cm10.1 the Phone works perfectly!But I need Camera functionality,so I could not use it as daily driver!
I tried 6-7 roms gingerbread-based, the steeldroid 5.6(Ics based)and CM9.also stock rom (5.6.890, 5.7.906 and 5.8.25) reboot.
It's not wifi related (it reboots even with wifi off),it's not gsm related (it reboot even in airplane mode),it's not governor related(It reboot set in performance,hotplug,badass,ondemand,userspace...), it's not cpu related(it reboots even if I set Cpu to stay always to the max),it's not account related(it reboots even before setting the account),it's not deepsleep related(it reboots even if I disable deepsleep with wake lock app)
It doesn't reboot when I plug it in Pc but it reboots when it's plugged into the charger..
Help please..I'm going crazy!!
---------
I would like to logcat..but if I logcat with the phone it doesn't save my log..if I want to take a log from the pc the Phone doesn't reboot (it never reboots when it's plugged to the pc)

Related

G sensor not working.

I noticed that after using this rom for a few days my phone doesn't auto-rotate... nor does the G-Sensor work at all.
I go into Settings>Display>Horizontal Calibration, and the ball doesn't move from the center of the circle no matter where I turn the phone... it just stays there... even after I press "Calibrate" and it says it's calibrated but nothing happens..
It's weird... this has never happened to me on any ROM and am hoping that it isn't broken... don't see how. I didn't install any mods I haven't installed before and it always worked (yes I deleted cache partition and delvik-cache).
Would anyone know why it might not be working at all? Like what is the service or whatever that controls the g sensor specifically?
I am running simply galaxy 2.7.2 xe. It was working before but then decided to stop... help is greatly appreciated.
I have the same exact problem on my HTC Touch Pro2 (ATT) with the Windows Mobile 6.5 ROM installed.
The g-sensor works fine after you first boot up, and then completely stops working at some random interval. After this occurs, trying to calibrate the sensor results in the two animated levels freezing after twitching a bit. This obviously does not fix the problem.
I even tried using sktools to restart the g-sensor driver. The driver will apparently stop, but will not restart.
Honestly, I wouldn't mind rebooting this damn thing every time but it also freezes for like 15 minutes after I restart it. If you hit the power button to put the phone to sleep right after booting up, it will remain asleep and not respond to anything for almost a half hour. Sometimes calling it will wake it up though... and then it freezes again when you put it to sleep if it's within 20 minutes of boot up. The service process (services.exe) and manila show high CPU usage during this time.
Also the notification manager does not start up automatically; its service needs to be started manually each time. Setting it to manual does not fix anything.
Halp

[Q] Galaxy S2 display wake up in sleep mode

Hello!
My problem: I push the power button short on my Galaxy S2 to go sleep mode. The screen is goes black, the phone went sleep mode. I leave it on the table and I see the display is light up for 1-2 seconds and then off. This happening for 4-5 times then the sleeping continues for a long period.
What causes this problem? What can I do against it?
I've ben uninstalled almost all later installed programs, stay only stock apps +Titanium Backup, SPB Shell 3D, Dropbox, iGO, Adobe Reader, LogMeIn and Superuser (packaged in DoomLord's Easy rooting toolkit - that I've ben used to rooting my phone). Factory unlocked, rooted phone. All mobile data connection disabled - aviabled network connections are wifi and USB. I'm not using live wallpaper.
I think one of the apps try connectint to internet at this time, because when I turn on the wifi I get an application advise.
Android version: 2.3.4 Gingerbread
Build: GINGERBREAD.XWKI4
Any solution, suggestion?
(sorry my bad english)
Georgie9117 said:
Hello!
My problem: I push the power button short on my Galaxy S2 to go sleep mode. The screen is goes black, the phone went sleep mode. I leave it on the table and I see the display is light up for 1-2 seconds and then off. This happening for 4-5 times then the sleeping continues for a long period.
What causes this problem? What can I do against it?
I've ben uninstalled almost all later installed programs, stay only stock apps +Titanium Backup, SPB Shell 3D, Dropbox, iGO, Adobe Reader, LogMeIn and Superuser (packaged in DoomLord's Easy rooting toolkit - that I've ben used to rooting my phone). Factory unlocked, rooted phone. All mobile data connection disabled - aviabled network connections are wifi and USB. I'm not using live wallpaper.
I think one of the apps try connectint to internet at this time, because when I turn on the wifi I get an application advise.
Android version: 2.3.4 Gingerbread
Build: GINGERBREAD.XWKI4
Any solution, suggestion?
(sorry my bad english)
Click to expand...
Click to collapse
Same problem here. Sometimes when i put the phone to sleep, after a short period of time the screen turns on, and stays so until i put it again to sleep or wait until the timer (i use 15 seconds here) to power the screen off. This happens with or without wifi/3g so i think that's not a problem with an app trying to access internet.
Other annoying issue is when i'm charging the phone, sometimes when it reaches 100%, the screen turns on to say that's full charged, and continues on like.... forever. I noticed that when i put the phone to charge before sleeping and mornings when i go take the phone off the charge, the screen is already on for a long time.
Im using Stock Frankestein ROM 2.3.6 XWKK5 with CF "stock" root Kernel, with out Set CPU or any other Governor. Also using stock launcher.
84tdan said:
Same problem here. Sometimes when i put the phone to sleep, after a short period of time the screen turns on, and stays so until i put it again to sleep or wait until the timer (i use 15 seconds here) to power the screen off. This happens with or without wifi/3g so i think that's not a problem with an app trying to access internet.
Other annoying issue is when i'm charging the phone, sometimes when it reaches 100%, the screen turns on to say that's full charged, and continues on like.... forever. I noticed that when i put the phone to charge before sleeping and mornings when i go take the phone off the charge, the screen is already on for a long time.
Im using Stock Frankestein ROM 2.3.6 XWKK5 with CF "stock" root Kernel, with out Set CPU or any other Governor. Also using stock launcher.
Click to expand...
Click to collapse
i have a similar issue , opened a thread here :
http://forum.xda-developers.com/showthread.php?t=1405606
also added logcat , you can see the process thats trying to run multiple times , and wont stop until i press something .
this is very bad .if this happens at night , your phone might stay with screen on for hours , with the same image , the image will burn onto the screen eventually .
i'm running 2.3.6 KK5, siyah kernel , go launcher ,pattern lockscreen .
Thank you for hints guys!
I think I find it! I use SPB Shell 3D launcher. In the settings of this app checked the 'using mobile data network to download weather informations' (or something like). I unchecked it and this effect was gone - at least last evening... Now I using wifi and reinstalled all applications like before and now no ads.
But this means I think well - an application try to access internet (with GSM data connection) but the service provider denied, beause I've no subscribe.
So I advocate for you to search something settings like this in your apps.
i have that issue as well..i tried few different roms and kernels but no luck. so its hardware issue i think.. .
Used to happen to me a lot,until i installed Go launcher and Go locker.I know its not exactly a solution but at least its working,plus anything else than the stock samsung lock screen is soooo much better.
And the end... Uninstall all apps which are using ads whit AirPush technology. How do you know which are they? The AirPush Detector helps you find them - search on Google Play it's free!
Thanks for your attention!
20590630
hackinistrator said:
i have a similar issue , opened a thread here :
http://forum.xda-developers.com/showthread.php?t=1405606
also added logcat , you can see the process thats trying to run multiple times , and wont stop until i press something .
this is very bad .if this happens at night , your phone might stay with screen on for hours , with the same image , the image will burn onto the screen eventually .
i'm running 2.3.6 KK5, siyah kernel , go launcher ,pattern lockscreen .
Click to expand...
Click to collapse
thanks. you can see the process thats trying to run multiple times , and wont stop until i press something .
this is very bad . Pasta tarifleri

[Q] [CM10.1] [JB 4.2.2] System crashes on load

Hi,
my Galaxy SII runs on rooted CM10.1.3 which worked fine for a while.
Then it started to sometimes shut down all of a sudden. That usually was when I worked with maps (navigating). Then it also started to shut down when I worked with other apps that I suppose consume a little resources (eg. browser).
Whenever I re-boot right after the shutdown, it shuts down already during the CM start animation. With the second try it takes a little longer to shut down again. Usually I just have to wait 10-15 minutes to be able to re-boot finally. Sometimes only, when I connect it to the charger.
Just when it tries to run the scheduled Titanium Backup, after re-boot, it shuts down again, if I miss to stop Titanium in time.
After such a re-boot it usually shows very low (red) battery status. Just after it recovered after a short while, the BattStatus is back to its former value.
That happens no matter, if USB Debugging is enabled or disabled.
Even my former last resort (flight mode on - battery out+back in - flight mode off) doesn't help.
Today I wanted to backup to my PC before updating CM (hoping to solve the issues) just to find, that I couldn't connect to the PC anymore.
My App USB mode switch for SGS1 on CM shows an error message that I have to turn on USB Debugging to make it work. But USB Debugging was activated.
The processor is running at around 70% (1000 MHz) and+ 29% (800 MHz) when it got into this trouble.
I checked with Zooner Antivirus and it says, I'm clean.
Does anyone have an idea,
why my system shuts down
why it takes so long to recover
why I can't connect to the PC anymore
why USB Debugging is not recognized anymore
Those are many questions, but I'm sure, the answers point to the same root cause.
Thanks!
I could stop the massive CPU usage with Rescan Media Root. Now CPU is down to 60% (of which 97% (1200 MHz) and 1% (800 MHz)). Still, it looks odd to me that the CPU mainly runs on 1200 MHz though there isn't anything big running. Just the usual background processes.
It goes to deep sleep all right when I leave it alone. USB Debugging is turned off now.
Now my main concern is the sudden shut down of the system out of nowhere with the problem to re-start.
Has anyone found a solution for a similar problem?
Partly solved, but crashes still occur
CloeWolf said:
3. why I can't connect to the PC anymore
4. why USB Debugging is not recognized anymore
Click to expand...
Click to collapse
I got this part of my problems solved. Somehow no USB connection mode was selected anymore and I just didn't find the path to get to enabling it (Alzheimer??).
Now I found it: Settings > Storage > left button: USB-Connection (PC)
Meanwhile I updated to CM 10.2-20131026-Nightly. Unfortunately I experienced another sudden crash lately after registering a call on Control your calls 2.9 and another while surfing via 3G.
So, these qustions remain:
CloeWolf said:
1. why my system shuts down
2. why it takes so long to recover
Click to expand...
Click to collapse
I would still appreciate ideas regarding those crashes. It's so strange that I can not properly reboot right after the crash, but later on.

i9100 G having problem

Hi Dear Members,
Good Day!
I'm using i9100G and having a weird issue. if i charge my battery to 100% and remove the connector after some time my mobile will be hanged and i have force restart it by pulling out battery or pressing the power key with volume down key, this also happen when i connect my wifi and put the phone on table after some time when i try to turn on screen and press buttons nothing happend, it will be hanged. if some thing playing in background (e.g music player) or phone is connected with data cable then phone dont hanged other wise it will be hanged. is this SOD bugg or what? i recently installed CM 4.4.2 and it worked fine didn't hanged a single time but yesterday i installed stock rom 4.1.2 and the same issue again. is there any thing i can do to get rid of this thing becuz when it hanged i dnt get calls etc any thing and making a lot of issue cuz of this i have to check my phone every 10 min. any suggestion will be appreciated.
58 views and not a single reply ? Any developer can suggest any thing. thanks in advance.

[Q] padfone sucks !!! RANDOM REBOOTS help

Hi ,I just bough the ( padfone X) from a dealer on eBay my issue is it keeps on rebooting randomly for no reason I had tried everything from factory reset it ,also running device on safe mode clearing cache uninstalling wallpapers or unwanted apps I didn't need ,but once I managed to keep it alive I guess by keeping the apex launcher running in memory it did run okay approximately for 3 days. was running smoothly no reboots happy until one day I was playing a game and suddenly just out of no where it restarted again ,and same problem returned. I tried to do the last same trick and no use. it kept on restarting(force rebooting) every 30-20 minutes ,also got little overheating not too hot but warm !!
setup further info *no rooting *AT&T unlocked *using nova(phone) ,apex(station) with the padfone launcher app a padfone thing *used for 2 weeks only *running on kitkat 4.4.2 *sometimes using airplane mode phone runs for ever sometimes when I use AP mood it reboot in that moment * experiencing system UI crashes I noticed it crashes sometimes rather than rebooting * had over 300 random reboots in 2 weeks
padfone is awesome device I love it unfortunately still a messy device to handle . ANY HELP !!!
ohh and CPU reading is weird avg use sometimes is around 5% or 1% but the CPU GHz use is at maximum or stopped
same problem
spaceagent5823 said:
Hi ,I just bough the ( padfone X) from a dealer on eBay my issue is it keeps on rebooting randomly for no reason I had tried everything from factory reset it ,also running device on safe mode clearing cache uninstalling wallpapers or unwanted apps I didn't need ,but once I managed to keep it alive I guess by keeping the apex launcher running in memory it did run okay approximately for 3 days. was running smoothly no reboots happy until one day I was playing a game and suddenly just out of no where it restarted again ,and same problem returned. I tried to do the last same trick and no use. it kept on restarting(force rebooting) every 30-20 minutes ,also got little overheating not too hot but warm !!
setup further info *no rooting *AT&T unlocked *using nova(phone) ,apex(station) with the padfone launcher app a padfone thing *used for 2 weeks only *running on kitkat 4.4.2 *sometimes using airplane mode phone runs for ever sometimes when I use AP mood it reboot in that moment * experiencing system UI crashes I noticed it crashes sometimes rather than rebooting * had over 300 random reboots in 2 weeks
padfone is awesome device I love it unfortunately still a messy device to handle . ANY HELP !!!
ohh and CPU reading is weird avg use sometimes is around 5% or 1% but the CPU GHz use is at maximum or stopped
Click to expand...
Click to collapse
Unrelated to your question, but how did you install two different launchers for the phone and the station? Sorry for barging in.

Categories

Resources