Hi Guys
I flashed the leaked ICS but hate it. Can I flash to stock GB via Odin? What about the baseband versions etc.., would it matter?
Sorry, I read another thread but it's unclear and I want to avoid bricking. Thanks
As far as what I've read you can flash stock from Odin or even use CWM to a previous nandroid of gingerbread.
Sent from my SAMSUNG-SGH-I717 using XDA
If you got your Note from AT&T, simply flash this stock ODIN:
http://forum.xda-developers.com/showthread.php?t=1506330
I went from ICS back to Gb cause I missed the tethering and it was easy. Just make sure you clear the caches and all should be well.
Thanks.. I was worried of the different baseband would have any adverse effect, but it doesn't sound like it will. I'll give it a try.
I Odin'd back to stock and I'm in a world of ****. My phone cant do anything, it just gets stuck on every swipe and reboots about every 5 minutes. Does anyone have any ideas?
Mines fine..only baseband is different, phone works.
Before I Odin to stock, I booted into recovery, factory reset and wiped cache. Odin, then booted into recovery and performed another factory reset and wiped cache again.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
beall49 said:
I Odin'd back to stock and I'm in a world of ****. My phone cant do anything, it just gets stuck on every swipe and reboots about every 5 minutes. Does anyone have any ideas?
Click to expand...
Click to collapse
Try factory wipe/format usb from within GB..it may help.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
beall49 said:
I Odin'd back to stock and I'm in a world of ****. My phone cant do anything, it just gets stuck on every swipe and reboots about every 5 minutes. Does anyone have any ideas?
Click to expand...
Click to collapse
figured it out. My post is below.
lindenhurst said:
You get it figured out? I did the same thing. . My old apps still there. I can tell it is gingerbread, but nothing works now. I hope you got your figured out!!
When I boot into recovery I get the screen that tells me to use the up and down keys and when I choose factory wipe, and press power button, nothing happebs. If I hold it down eventually the phone shuts off. When i restart it, nothing changed.
Click to expand...
Click to collapse
I had to revert from ICS to GB yesterday and, even tho I am on Telus, I had success by flashing the pda-odin-att-stock.rar image
I can't post links .. I'm too new. But literally.. google what's bolded above and you will find the hotfile link.
It replaced everything (including the recovery) ... FULL system image. Solved everything and brought me back to 100% stock.
So yes, I lost my root and my CWM recovery software.. but it got my phone working again.. I can reflash CWM and re-root as I need.
After the install, wipe cache, factory reset etc.
I too flashed the stock ATT rom but like the previous poster, it gave me a phone which started up but wouldn't work. When I tried to get into recovery mode, it went to a screen with the recovery mode stuff at the top, but with a yellow warning sign in the middle and some words about manual mode, and it would not let me do a wipe or reset.
Here is what I just did that did work.
I flashed the recovery-i717-cwm-b4.tar file with odin. This worked and allowed me to get into the "proper" recovery mode to do a wipe and factory reset, as well as a cache wipe. I then reflashed tieh the stock ATT rom, and my phone now is back to stock.
Just doing a sanity check: using TiBu to restore system data should work (in theory) so long as you restore data that has been backed up from the same ROM, correct?
Thanks for any help.
EDIT: Having power key problems, please see posts #3 and #16 for updated information.
In case it really backs up and restores EVERYTHING - theoretically you're right.
Practically, I'm not sure it's the case. Since you're restoring while running a ROM, I'm not sure you can get everything to exactly the same state.
Thanks for your help, but this question was hiding a bigger one.
So until today, my phone has been working just fine. I'm still running an old, now outdated and unsupported ROM: ShirshirROM pre-alpha ICS. It's been my daily driver for almost a whole year now, works perfectly with Entropy's old ICS kernel.
Yesterday, I got tired of shell errors with Superuser (which I had been dealing with since the latest binary update), so I finally switched to SuperSU. Everything seemed to work fine afterwards, though I noticed some trouble with the power button being a little wonky, i.e. showing up the power menu when I hadn't pressed it or not immediately responding.
Today, my power button doesn't work correctly at all. I tried wiping cache, dalvik, then restoring a Nandroid of the same ROM/Kernel combo from way earlier this year. Key test in CWM also shows that all buttons register when pressed, EXCEPT the power one. Otherwise phone functions are perfect; I can make calls, send/receive texts, etc, I just have to plug in my phone or have something happen for the screen to turn on, and then I have access to everything. My question is, is this (God forbid) a hardware failure? That would be my worst nightmare, seeing as I'm almost exactly one full year out from contract renewal, and I don't have a lot of money to spend on a new one, nor do I have nowhere near enough expertise to try to fix it myself. What can I do?
P.S. The TiBu question was because in case the Nandroid fixed the problem, I could just restore contacts and SMS from TiBu since it is the same ROM, and be back up and running immediately.
P.P.S. As mentioned, I can get into CWM. This is done by pulling battery, sticking it in, and holding all physical keys until boot screen shows twice. But I can't use the power key to select any options, I have to use home. And key test shows the power button not registering. I'm hoping that that means power key may still work, but that's just me praying this is fixable.
So this problem didn't occur at all prior to installing supersu ?
Phalanx7621 said:
So this problem didn't occur at all prior to installing supersu ?
Click to expand...
Click to collapse
No, as far as I recall. I'm not using supersu anymore since I'm on a Nandroid but power button still doesn't work. I have to find alternate ways of activating the screen, like plugging it into a charger or pulling the battery to restart :/
Sent from my SGH-I777
karate104 said:
No, as far as I recall. I'm not using supersu anymore since I'm on a Nandroid but power button still doesn't work. I have to find alternate ways of activating the screen, like plugging it into a charger or pulling the battery to restart :/
Sent from my SGH-I777
Click to expand...
Click to collapse
Run a Rom that will support siyah 4.3.3 or siyah 5.0.1 and enable swipe to wake.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Run a Rom that will support siyah 4.3.3 or siyah 5.0.1 and enable swipe to wake.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Is that my only option? How can I test for sure that it's a hardware failure and my power button is completely useless?
Sent from my SGH-I777
Full wipe and return to out of the box stock. If the issue persists, it's hardware.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Full wipe and return to out of the box stock. If the issue persists, it's hardware.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
After full wiping, if the problem is fixed I should be able to restore the Nandroid from earlier this year without retriggering it, right? Or is that out of the question now?
Sent from my SGH-I777
karate104 said:
After full wiping, if the problem is fixed I should be able to restore the Nandroid from earlier this year without retriggering it, right? Or is that out of the question now?
Sent from my SGH-I777
Click to expand...
Click to collapse
No one will know until you try it, as yours appears to be a unique issue if it is being caused by software/firmware.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
No one will know until you try it, as yours appears to be a unique issue if it is being caused by software/firmware.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
So I backed up stuff, then went ahead and flashed bone stock using the Odin3 One-Click from 2a in creepy's guide. I can't get past the initial setup wizard though, because Google Services Framework (process com.google.process.gapps), Calendar Storage (process.com.android.providers.calendar), and other Google apps processes keep force closing when I click the Android to start. I was able to boot into stock e3 recovery (again using three-button combo), but I can't select anything using the power key.
I didn't do a full data wipe/factory reset before flashing, and I can't get to the main menus to do so because my phone won't get past the setup wizard, which keeps crashing. What do I try next?
EDIT: I know that I was able to make selections using a CWM-enabled ICS kernel; home key functioned as select. I have the CWM-flashable zip, and I wanted to know if there's anyway to flash this kernel using Odin. I know it won't boot (custom ICS kernel with Gingerbread stock rom), but if I can get into recovery, I can use the home key to do a full data wipe/factory reset, then I'd Odin stock kernel+ROM again and see if that fixes things. So my question is, how do I flash a CWM-zipped kernel in Odin? (You can tell I never use Odin)
EDIT2: I'd still like to know how I can flash a CWM-zipped kernel in Odin, but I'm gonna hold off on it as it would trip the counter and I found out my phone is still under warranty, hooray! They're sending a refurb'ed replacement that should be here in a couple days, I can test that out and see if I can get me up and running again before I decide to do something really rash like trip the counter. It sucks cause I'm going out of town on Thursday but the replacement is arriving Friday, and I won't be back until next Wednesday. I'm stuck using my old iPhone 3G until then :/
I do know you can't flash this from Odim. You'll need another kind of file. Tar file... I don't remember.
Don't know where to find it.
I don't think you should back to stock. Just wipe and formating everything could test it.
Find an app that allow you to get recovery from android like rom toolbox lite.
Download mrRobinson AeSedai Aroma.
After formating and wiped everything, flash your rom and don't get out of recovery. Flash AeSedai just after. Flash gapps and KERNEL from AeSedai.
Must be an cm10 or aokp rom... Any rom from that source.
Sent from my SGH-I777 using xda app-developers app
RatusNatus said:
I do know you can't flash this from Odim. You'll need another kind of file. Tar file... I don't remember.
Don't know where to find it.
I don't think you should back to stock. Just wipe and formating everything could test it.
Find an app that allow you to get recovery from android like rom toolbox lite.
Download mrRobinson AeSedai Aroma.
After formating and wiped everything, flash your rom and don't get out of recovery. Flash AeSedai just after. Flash gapps and KERNEL from AeSedai.
Must be an cm10 or aokp rom... Any rom from that source.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
How would I format and wipe everything if I can't get past the setup wizard on bone stock 2.3.4? I can't install apps, make calls or texts, nothing. All I can do is select the language and make emergency calls. I can't wipe in stock e3 recovery either because the power button doesn't work.
I need a way to either Odin a kernel from which I can use the home button to make selections, or find some other way to remotely format and wipe my phone. Is there a way for me to put my phone in USB debugging mode so I can maybe use ADB? I can't access the settings menu...
Don't u use home button to select things in stock recovery?
Phalanx7621 said:
Don't u use home button to select things in stock recovery?
Click to expand...
Click to collapse
Nah, it's power key. I double checked again this morning. Oh, and I guess it's called 3e recovery, not e3 xD.
One other note, when pulling battery, then putting it back in, phone autoboots. I have to hold buttons then place battery in to boot to recovery, and for download mode, I have to have it plugged in, buttons held, then place battery in to get to download mode.
EDIT: Would anyone be willing to do me a huge favor? I want to find out if Entropy's DD GB kernel, the Odin-flashable tar one, can use home as select in CWM. Would someone be willing to temporarily flash DD_01242012 from here to check for me? It's a CWM zip, the changes are very tiny between it and the previous 01232012 Odin one. I just don't want to Odin it myself and trip the counter to find out it was useless, especially since I don't have a jig to reset the counter.
So an update:
While looking around for a way to root my new refurb model which came shipped with stock ICS, I found creepy's Stock ICS with root package, and I thought, "I told AT&T I was on ICS, I guess I should actually put ICS on my phone instead of leaving GB (UCKH7) on there. Maybe since I was on ICS before I can get past the gapps force closing too and do a factory reset from the settings menu." Sure enough, after flashing stock ICS, I was able to get past the darn wizard and toy with it. I do have problems of course: calendar still force closes, and the phone will randomly reboot after some period of using it. But at least I was able to access stuff.
My data was all still there, all pictures, contacts, settings, etc. I realized that before I do a data wipe/factory reset, I should heed the emmc superbrick bug warning and NOT do that with stock ICS kernel. I still had ES file explorer and root access, so I went in and manually deleted all data as much as possible, to make it look like my phone did have a factory reset done as I said to the AT&T representative. I've deleted wifi access points, browser history/cookies/cache, all contacts, texts, pictures/videos, downloads, all CWM zips and backups, all installed apps, all accounts that were signed in...
My newest questions are:
1) is there anything I'm missing that I should delete so that my phone does not look like it's been modified in any way? Also, any personal data I'm missing that needs to be deleted? I still have root access so I can delete anything I want.
2) Should I go ahead and risk the brickbug and actually do a factory reset/data wipe, or should I just let it be since I've deleted most things manually (and not potentially send them a useless brick lol)? Actually, since I'm rooted, I can install Mobile Odin to flash a CWM-enabled kernel, then wipe data/factory reset safely from there; that is, assuming my phone doesn't do a random reboot in the middle of flashing the kernel. I do run the risk of it rebooting while flashing and possibly bricking something else. So should I do that and take that risk, should I take the risk of wiping data from the stock kernel, or is there no reason to take either risk anymore?
3) Is there anywhere I can find a non-rooted stock UCLE5 ICS Odin-flashable tar, that I can flash before sending the phone back?
How about:
1. Flash back to stock GB
2. Wipe Data
3. Upgrade to stock ICS via kies or OTA
Sent from my SGH-I777 using xda premium
Red_81 said:
How about:
1. Flash back to stock GB
2. Wipe Data
3. Upgrade to stock ICS via kies or OTA
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks for your help, but I can't do that. If I could, I wouldn't be stuck in this predicament.
Power key doesn't work at all, but it is necessary to make selections in stock 3e recovery. Hence, I can't wipe from recovery, either on stock GB or ICS.
Stock GB rom doesn't boot past Setup Launcher due to gapps force-closes. These force closes prevent me from reaching the settings menu within stock GB to do a wipe there.
My two options for wiping data are using stock ICS ROM (under settings menu), or flashing a custom kernel using Mobile Odin, then wiping with the home key in CWM. Both are risky: stock ICS ROM uses the stock kernel to wipe, possible brickbug there. My phone currently experiences random reboots without warning; a reboot during a Mobile Odin flash could also brick something. My question is, should I do either one, or neither at all?
What about wiping through ADB?
Adb shell
Wipe data
Or
Adb recovery --wipe-data
Sent from my SGH-I777 using xda premium
Red_81 said:
What about wiping through ADB?
Adb shell
Wipe data
Or
Adb recovery --wipe-data
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Well, that previously wasn't an option on GB since I couldn't put the phone in debugging mode, but I can now in ICS so in theory it should work. The question now is, will the phone do one of its random reboots while I'm working with it in ADB...
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Hello.
Im using ripper rom on my s3 and everything on the phone was working ever since i got the rom(even going into reboots and recovery) but today i downloaded an update that i was supposed to flash and when i select reboot into recovery from the shutdown menu for some reason it went into download mode and i can't get it out of it =/
The only thing i did besides download the update(Which i didn't get to install/flash) was a backup with nandroid, but i did them before and restored from them and never had a problem.
Does anyone know what could it be and how to fix it? Do i really need to use the odin software? I have seen some threads that suggest a fix using odin and going back to stock, but i didn't even use odin on this rom (only once when i got the phone to put it back to stock and haven't used it again.
Thanks!
griffin_1 said:
Hello.
Im using ripper rom on my s3 and everything on the phone was working ever since i got the rom(even going into reboots and recovery) but today i downloaded an update that i was supposed to flash and when i select reboot into recovery from the shutdown menu for some reason it went into download mode and i can't get it out of it =/
The only thing i did besides download the update(Which i didn't get to install/flash) was a backup with nandroid, but i did them before and restored from them and never had a problem.
Does anyone know what could it be and how to fix it? Do i really need to use the odin software? I have seen some threads that suggest a fix using odin and going back to stock, but i didn't even use odin on this rom (only once when i got the phone to put it back to stock and haven't used it again.
Thanks!
Click to expand...
Click to collapse
Can u enter recovery?
Sent from my GT-I9300 using xda premium
REMOVE THE BATTRY AND WAIT FOR 5 mins aND then insert it !
I couldn't even get into recovery =/ i ended up restoring back to stock firmware via odin, then installed recovery and root.
I finally got the phone working again, but i have no idea why it decided to go on a "download mode" loop. Hopefully it won't happen again and if it does, i will try your advice to take the battery out for 5 minutes and see if works ( i did remove the battery but put it back right away to try to go into recovery, but with no luck).
Anyway, thanks for the help!
I'm having a bit of an issue with my phone.
I was running alliance ROM build 30 since it was released. A week or so ago i wanted to try cm12. So I flashed octos.
It flashed fine and it runs fine, but I still can't seem to "get into" asop. Just seem to keep wanting touch whiz again.
So I went to restore my backup of alliance and it fails right away. I'm using philz recovery. I've also tried twrp and no change.
So I went to do a clean install of alliance and it flashed fine, but it won't boot. It hangs at the boot screen.
So I tried to flash another touch whiz ROM and it did the same thing. Just won't boot.
But it does not boot loop, it justs gets to the boot animation and stays there until I take out the battery.
So far I'm able to get any asop ROM to work fine, but only one touchwhiz. And even then the touchwhiz ROM was really slow and force closed apps a lot (maybe the ROM, maybe not, I'm not sure).
So any help is greatly appreciated.
Odin back to stock?
Haven't tried that yet.
I assume I would have to use the MC3 file right?
So I can re root and unlock again.
It appears that there isnt any files that I can download.
Everything I can find is no longer available
Well I found the odin file.
Ran it now my phone is really screwed. It said it ran successfully but when it went to boot, it just flashes the galaxy note 2 screen.
Now every time I try to flash it in Odin it fails right away.
Bump. I tried to run the odin file again and it still fails.
Im back om my old phone for now so i have some time to figure this out.
Sent from my DROIDX using XDA Free mobile app
droidx2.3.3 said:
Bump. I tried to run the odin file again and it still fails.
Im back om my old phone for now so i have some time to figure this out.
Sent from my DROIDX using XDA Free mobile app
Click to expand...
Click to collapse
have you tried to boot into stock recovery and wipe data/cache?
I tried but it wont boot into recovery. The only thing kt will so is flash the boot screen or go into download mode
Sent from my DROIDX using XDA Free mobile app
You should have just used a custom kernel. It would boot with AGNI fine. My phone is doing the same thing yours was, IE not booting touchwiz roms. AGNI always works to have it boot correctly. Now, though, you have a different problem which is you probably flashed the wrong ODIN file and might have bricked the phone.
I've used this odin file before with success though.
I couldn't find any files to download at first, but then I remembered that I had them on my computer still from a long time ago.
I figured out if you load MochaDrizzle ROM, then after booted, download the app called FOLDERMOUNT. Run it with root access and it will 'fix' a broken permission. Next load Int-SDCard Writer and hit the Download (extra fix) button and then Fix Me buttons. THen reboot. Now you should be able to re-load stock roms and have them boot.
SHEESH!