Related
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.
Hello everyone,
I just tried to put CM 10.1 (pollux RC3) on my Z, but I think I made a mistake: I accidently used a fastboot command which was meant for the xperia z phone, not the tablet (something like "fastboot flash boot boot.img"). Now I probably crashed my tablet, didn't I?
First a red light was visible, after 10mins I did a vol.up+power button reset. Now the red light is gone and so is my tablet. I can't get it recognized on the computer anymore, I can't start up the device, nothing.
Anyone has an idea what to do or am I just screwed?
*Edit*
Got it working again, see link in last post.
No you're not screwed. Download your corresponding system dump (do a search in this XTZ forum) eg. SGP311 (wifi 16gb), or SGP312(wifi32gb) and so on. Download flashtool (do a search too). FLASH THAT SYSTEM DUMP WITH FLASHTOOL (sorry for caps). HTH.
cool, thanks for the quick reply. I guess I was a bit fast on the first try...cool someone can help me out
downloading the dump and flashtool right now, gonna take a while, slow connection right now.
cheers
Aaalright...*still hoping not to be screwed*
If I plugin the usb cable to the computer, holding the volume button down for flash mode, absolutely nothing happens. I tried windows boxes and linux boxes, neither one of them logs anything happening on the usb ports.
Does anyone have a suggestion what to do? The tablet seems dead...the only thing is a single quick LED blink if I do a reset with power button + vol. up. So far I can't get it to do anything else besides that.
*New situation*
I plugged in the USB cable while holding power+vol up. Now I got a constant red led...
Trying this right now: http://forum.xda-developers.com/showthread.php?p=42003603
Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)
Hello everyone,
First of all, let me tell you that I am very good at android rom flashing and stuff and know these things. Now, here is my problem.
1. I have Aoson M19 tablet, which fell and the lcd screen stopped working.. The touch still work as I can see the output on HDMI by connecting it to an external screen. It lied in its box for sometime before I took it out again...
2. It had a pattern lock, which I unfortunately forgot, so after trying many times, it is stuck asking for my email/password immediately after boot (however the wifi is disabled at start so it never goes anywhere)
3. The tablet does not have a volume button, It has a button for Power, Escape, Home and Menu. I tried all combinations possible (as much as I could) to try and boot it so that it is recognized as an Rockchip 2918 device on my pc connected to it, but it does not work at all..
4. I tried using adb but it never shows it as a device when connected..
So I would like to ask the gurus as xda on how can I get my tablet back by either installing a new ROM (if I can get it to be recognized as rockchip device I can install drivers for it), or some other way to bypass the pattern lock somehow. Maybe some sdcard boot trick which I am unaware of till now..
(Note: this is indeed my device, not trying to hack into someone elses). Any help appreciated...
Maybe this will help: http://forum.gsmhosting.com/vbb/f90...pattern-problem-paswword-without-adb-1717216/
It was mentioned on the last page that Rockchip devices without Volume keys must connect the usb cable to PC and the port on tablet and press the reset button in the hole and the tab will be booted into the correct mode.
Tools: http://www.solidfiles.com/d/747bdce149/Rockchip_Batch_Tool_v1.7.rar
Firmware: http://www.szaoson.com/UploadFiles/Help/20130829102744_71726.rar ( 4.0 ICS v.1 )
My understanding is that the method for flashing Rockchip tablets is essentially the same across the board. So maybe try this guide for some general direction: http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
I don't know if this will work for your particular Rockchip tablet, but I also found this: http://forum.gsmhosting.com/vbb/f90...re-tool-how-use-guide-share-sonualok-1786042/
Please keep in mind that I do not have said tablet and am only going off of info I have found on the various forums that people reported success with. Also, be sure you do have the RK2918 version as there is a dual core RK3066 model with the same name floating around that I had noticed. The link provided is for a 2918 version. Good luck!
es0tericcha0s, you are a star, let me try and i will be back with the results.. I hope something will surely work..
Ok tried the reset button trick also, pressing it and holding before connecting the usb, and pressing after connecting usb, also tried the same with power button, but it always boots in android. And as usual the device keeps appearing as 'MID' in devie manager...
still stuck
Quick update
Ok quick update, I finally found the way to get it recognized differently (good or bad)
For Aoson M19, Hold the 'Home' key on tablet and then connect the usb cable to PC. However, it still refuses to install the drivers for the device..
See attached picture, still working on it...
{Solved}I have an Azpen A727 i bought from MicroCenter that I bricked.
I found out the solution to unbrick the tablet. First you need the firmware for the version of Android your A727 came with (Jelly Bean or KitKat) which i will provide the links for or you can request from Azpen (which i did and got a response for in 30min), 2nd you need a flashing tool called PheonixUSBPro and a "key" to flash your firmware on the bricked tablet.
1. Follow the instructions on this page for flashing firmware and downloading PhoenixUSBPro here http://www.azpenpc.com/download/detail.php/id-2.html or use the Backup here https://drive.google.com/folderview...JrLUZEYTFjOVF2ajJISy1pdkVCSTgzVlk&usp=sharing
2. a. Firmware and "Key" for A727 Jelly Bean https://drive.google.com/folderview?id=0B53yZ1fbVqxJVnNFSkY2cjFoRjQ&usp=sharing
b. Firmware and "Key" for A727 KitKat (For some reason we have two different versions. If one doesn't work try the other)https://drive.google.com/folderview?id=0B53yZ1fbVqxJZGx2SDVPcWhsWmM&usp=sharing
Note: If anyone is having trouble with PhoenixUSBPro detecting your tablet try holding down the power button and plugging in your tablet from the micro-USB side then press the power button 10 times. Then Windows should be installing the driver so PhoenixUSBPro should detect it now. It worked for me in Windows 7.
If anyone has any problems let me know . Thank you @viper2110 for providing the community with the KitKat firmware.
bricked as well
Were you able to get the device working again?
I bricked mine messing with it today and am trying to fix it.
Have the stock recovery so far if you still need it let me know. xda wont let me attach for some reason
buellonsholes said:
Were you able to get the device working again?
I bricked mine messing with it today and am trying to fix it.
Have the stock recovery so far if you still need it let me know. xda wont let me attach for some reason
Click to expand...
Click to collapse
Yep i fixed it. I edited the first post with the solution
thank you
treecheetahdolo said:
Yep i fixed it. I edited the first post with the solution
Click to expand...
Click to collapse
still trying to figure out adb, livesuit, and eclipse all at once but here we go.
nothing like jumping in and just figuring out whats what lol
no luck
treecheetahdolo said:
{Solved}I have an Azpen A727 i bought from MicroCenter that the camera wasnt working so i decided to install a custom ROM on it instead of bringing back to the store. I was able to root it. But once I flashed a custom ClockWorldMod from http://forum.xda-developers.com/showthread.php?t=2532464 i was bricked.
I found out the solution to unbrick the tablet. First you need the firmware which i will provide the link for or you can request from Azpen (which i did and got a response for in 30min), 2nd you need a flashing tool called PheonixUSBPro and a "key" to flash your firmware on the bricked tablet.
1. Follow the instructions on this page for flashing firmware and downloading PhoenixUSBPro http://www.azpenpc.com/download/detail.php/id-2.html
2. Firmware and "Key" https://drive.google.com/folderview?id=0B53yZ1fbVqxJVnNFSkY2cjFoRjQ&usp=sharing
If anyone has any problems let me know
.
Click to expand...
Click to collapse
Can 't figure out why but after trying many times phoenixpro fails me (trying to use key but red button and green button both arent there)
livesuit wont run either unsure why
only thing i have up and running is sdk manager and im working on learning the steps with it
anyone who can help it would be appreciated. using a windows 8
Very important:
Originally Posted by dsulliii View Post
1) Make sure your A700 is turned off. (Do NOT have the micro-USB end plugged into your A700 at this time, that is for later.)
2) Start LiveSuit on your computer. (The COMPUTER end of your USB cable should be plugged into ONLY your computer at this stage.)
3) Select the ROM that you want to flash to your A700.
4) Hold down the Vol button on your device (I usually hold it down Vol-, not Vol+, but I believe that this device does not matter which.)
5) While holding down Vol, plug the micro-USB end of the cable into your A700. Keep holding down the Vol button.
6) While still holding down the Vol button, WITH the USB cable now connected between your computer and your A700, press and release the A700's Power button 10 times, and wait for a second to a few.
7) The LiveSuit program will detect your A700 going into download mode and begin prompting you for what to do.
8) Follow LiveSuit's recommendations, including formatting. It will take less than 5 minutes.
This wasn't clear to me from the original post.
However I followed the original link and figured it out.
Hope that clears it up for anyone else.
.....
WarezAppz said:
Very important:
Originally Posted by dsulliii View Post
1) Make sure your A700 is turned off. (Do NOT have the micro-USB end plugged into your A700 at this time, that is for later.)
2) Start LiveSuit on your computer. (The COMPUTER end of your USB cable should be plugged into ONLY your computer at this stage.)
3) Select the ROM that you want to flash to your A700.
4) Hold down the Vol button on your device (I usually hold it down Vol-, not Vol+, but I believe that this device does not matter which.)
5) While holding down Vol, plug the micro-USB end of the cable into your A700. Keep holding down the Vol button.
6) While still holding down the Vol button, WITH the USB cable now connected between your computer and your A700, press and release the A700's Power button 10 times, and wait for a second to a few.
7) The LiveSuit program will detect your A700 going into download mode and begin prompting you for what to do.
8) Follow LiveSuit's recommendations, including formatting. It will take less than 5 minutes.
This wasn't clear to me from the original post.
However I followed the original link and figured it out.
Hope that clears it up for anyone else.
Click to expand...
Click to collapse
i'm feeling really dumb here i read that too and am pretty sure i have gotten it into this mode. but its the livesuit software thats the problem i cant get that or the other ones i mentioned to even run. anything i do get to run (phoenix and sdk) dont seem to run correctly. windows 8 is annoying me this week. im trying to get one of my old windows 7 computers up and running and ill try again i guess
WarezAppz said:
Very important:
Originally Posted by dsulliii View Post
1) Make sure your A700 is turned off. (Do NOT have the micro-USB end plugged into your A700 at this time, that is for later.)
2) Start LiveSuit on your computer. (The COMPUTER end of your USB cable should be plugged into ONLY your computer at this stage.)
3) Select the ROM that you want to flash to your A700.
4) Hold down the Vol button on your device (I usually hold it down Vol-, not Vol+, but I believe that this device does not matter which.)
5) While holding down Vol, plug the micro-USB end of the cable into your A700. Keep holding down the Vol button.
6) While still holding down the Vol button, WITH the USB cable now connected between your computer and your A700, press and release the A700's Power button 10 times, and wait for a second to a few.
7) The LiveSuit program will detect your A700 going into download mode and begin prompting you for what to do.
8) Follow LiveSuit's recommendations, including formatting. It will take less than 5 minutes.
This wasn't clear to me from the original post.
However I followed the original link and figured it out.
Hope that clears it up for anyone else.
Click to expand...
Click to collapse
Im pretty sure LiveSuit wont work on the A727 because the CPU is different. The A727 uses an Allwinner thats why we have to use PhoenixUSBPro. Sorry for my late response I dont have internet anymore so I got lucky today getting online, lol.
treecheetahdolo said:
Im pretty sure LiveSuit wont work on the A727 because the CPU is different. The A727 uses an Allwinner thats why we have to use PhoenixUSBPro. Sorry for my late response I dont have internet anymore so I got lucky today getting online, lol.
Click to expand...
Click to collapse
Yeah, sorry I was using PhoenixUSBPro, guilty of not mentioning that.
Anyone else have any luck unbricking the A727 with this method?
Look what I ran across
SDK for Allwinner CPUs?
Now will this aid in someone creating a Android 4.4 image for an Azpen a1023 or at least a custom CWM or TWRP? for one?
answer soon back.
WarezAppz said:
SDK for Allwinner CPUs?
Now will this aid in someone creating a Android 4.4 image for an Azpen a1023 or at least a custom CWM or TWRP? for one?
answer soon back.
Click to expand...
Click to collapse
I dont know but BLuFeNiX started this thread where he did a CWM for an A700 http://forum.xda-developers.com/showthread.php?t=2532464
treecheetahdolo said:
I dont know but BLuFeNiX started this thread where he did a CWM for an A700 http://forum.xda-developers.com/showthread.php?t=2532464
Click to expand...
Click to collapse
Yeah I was aware of that, but that's for an A700
and I am actually interested in A1023, not sure the A700 will work for the A1023
Question. Frozen after reimage.
Hi all! I was able to reimage my A727 with PhoenixUSBPro and the firmware and key linked in the OP, but when it reboots and comes up to the initial screen, it's frozen. Won't take any input. The only thing I can do is force a shutdown with the power button. Am I doing something wrong? Thanks.
TMBackstrom said:
Hi all! I was able to reimage my A727 with PhoenixUSBPro and the firmware and key linked in the OP, but when it reboots and comes up to the initial screen, it's frozen. Won't take any input. The only thing I can do is force a shutdown with the power button. Am I doing something wrong? Thanks.
Click to expand...
Click to collapse
I dont know. Have you tried pressing the reset button?
treecheetahdolo said:
I dont know. Have you tried pressing the reset button?
Click to expand...
Click to collapse
Yup, tried the reset button and resetting back to factory. Still frozen.
I just redownloaded everything from the OP onto a Win 7 Pro x86, instead of on my Win 7 Ultimate x64 system, ran the upload, and it is working fine now. Thanks for all the help. :good:
TMBackstrom said:
I just redownloaded everything from the OP onto a Win 7 Pro x86, instead of on my Win 7 Ultimate x64 system, ran the upload, and it is working fine now. Thanks for all the help. :good:
Click to expand...
Click to collapse
Wow interesting. Im surprised it made a difference. Im glad you have everything up and running now
treecheetahdolo said:
{Solved}I have an Azpen A727 i bought from MicroCenter that I bricked.
I found out the solution to unbrick the tablet. First you need the firmware which i will provide the link for or you can request from Azpen (which i did and got a response for in 30min), 2nd you need a flashing tool called PheonixUSBPro and a "key" to flash your firmware on the bricked tablet.
1. Follow the instructions on this page for flashing firmware and downloading PhoenixUSBPro
2. Firmware and "Key"
If anyone has any problems let me know
Click to expand...
Click to collapse
I also have an azpen tablet that comes up with the azpen logo when switching it on and it just stays there.
I did try your solution above but does not work. The device does not seem to be picked up in PhoenixUSBPro.
In windows device manager it did pick up the device as "USB Developer". I instlled the Google drives and now it shows as "Android Composite ADB Interface". But PhoenixUSBPro still does nit pick it up.
Any ideas what else I can try.
viper2110 said:
I also have an azpen tablet that comes up with the azpen logo when switching it on and it just stays there.
I did try your solution above but does not work. The device does not seem to be picked up in PhoenixUSBPro.
In windows device manager it did pick up the device as "USB Developer". I instlled the Google drives and now it shows as "Android Composite ADB Interface". But PhoenixUSBPro still does nit pick it up.
Any ideas what else I can try.
Click to expand...
Click to collapse
Are you holding down the power button and volume down button while plugging in your tablet like Azpen said?