Related
Beside of juffo & superROM, any other new ROM for I9100G??
Look at the following 2 links...
http://forum.xda-developers.com/forumdisplay.php?f=1058
http://forum.xda-developers.com/forumdisplay.php?f=1204
Everything about SGS2 ROMs on xda developers can be found in those 2 links.
There is a new ROM for i9100G. Check it out
http://forum.xda-developers.com/showthread.php?t=1463891
need it too...
gti9100g 2.3.6 white s2
2.3.6 i9100GDDKI1
its really very crappy on microbes live wallpaper(not so smooth),
also sometimes its camera get failed and i have to switch off the phone to get camera again working , same happens sometimes in video player,previewing image after taking image from camera takes more time.
someone plzzzz help me to fix this.......
[A] Any new ROM for I9100G???
There are quite a few actually. I have one myself, and I was able to install many new ROMs. What you can do is going to sammobile.com
There, in the firmware section, you can install one of the new ROM versions (there were releases up to december, last time I checked).
If you need further assistance, kindly let me know.
HELP!!!!!!!!!!!!!!
i have this firmware on my s2 i9100GDDKI1
how to fix all that above mentioned probs plz let me know
thnxxxx in advance
---------- Post added at 03:15 AM ---------- Previous post was at 03:08 AM ----------
Frederick84-lb said:
There are quite a few actually. I have one myself, and I was able to install many new ROMs. What you can do is going to sammobile.com
There, in the firmware section, you can install one of the new ROM versions (there were releases up to december, last time I checked).
If you need further assistance, kindly let me know.
Click to expand...
Click to collapse
i have visited there but i am unable to find firmware for gti9100g plz send me link........
and also tell me process for flashing it ......
thanxxxxxx in advance frnd............
Hey,
Here's the link : http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=2#regiona
There you can select the Malaysian firmware for instance (since it's the latest amongst)
But first find your own firmware (the KI1) and save it on your laptop just in case you needed to fallback.
As for the procedure of flashing it's very simple, it has been listed by so many users on the forum here.
What I usually follow is this one:
###Downloads###
1- Install Samsung Kies from samsung.com
2- download the package from sammobile (it will mostly redirect you to hotfile.com, and you will have to download a (340MB ZIP)
3- Download Odin3 V1.83, it is the most appropriate with the GT-I9100G
####INSTALLATIONS#####
1- Install Samsung Kies [Needed later by ODIN for driver use]
2- Once Kies is installed and is able to run, close it and kill all the KIES processes in the Windows TASK Manager.
3- Make a directory in the C:\tmp for your update [name it without spaces]
4- Place the firmware pkg and Odin pkg there
5- Extract the firmware ZIP and the Odin ZIP
6- Take down the GS2 to download mode [syncro: POwer + Home + Vol_down]
7- start Odin
8- Connect the GS2 to the USB [if you're on a PC, use the back USBs]
9- Odin will identify its recognition of the GS2 with a yellow marker saying [ID:COMX]
10- Make sure you check only the AutoReboot and the F.Reset Time [NOTHING ELSE]
11- Click on PDA and go to your unzipped firmware directory [where you will have a .tar.md5 file] and select that file
12- Press on start in Odin
13- Odin should do the flash
14- The Phone will reboot if all is successful
15- Voila, you're done ))
this one is old stock rom 2.3.6 , update way back on September '11.
How to Unbrick/Flash
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin
First You Need
Latest Version of ODIN [ TRY TO GOOGLE IT]
Bricked Samsung Galaxy Ace S5830I
USB Cable
YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR
http://samsung-updates.com/device/?id=GT-S5830i
Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.
Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.
Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:
Sent from my GT-S5830i using xda app-developers app
we already have unbrick tutorial..
any help is appriciated...but please search before u post...
there is already a guide in general section stickies...
Sent from my GT-S5830i using xda app-developers app
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Had a bricked bootlooped s5830i laying somewhere, it is fixed now! thanks!
Cant unbrick
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
FirsThink2000 said:
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
Click to expand...
Click to collapse
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Hitesh2626 said:
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Click to expand...
Click to collapse
Hi! I was try it, and its works!!! TNX A LOT!!!!
FirsThink2000 said:
Hi! I was try it, and its works!!! TNX A LOT!!!!
Click to expand...
Click to collapse
Don't just say thanks, hit his thanks button! :silly:
odin3 1.84 stuck at <ID:0/005>setupconnection...
not working
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Flash013 said:
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Click to expand...
Click to collapse
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
ChelebiTech said:
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
Click to expand...
Click to collapse
I already did that ...it didn't help!
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
aakifnouman said:
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
Click to expand...
Click to collapse
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Hitesh2626 said:
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
aakifnouman said:
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
Click to expand...
Click to collapse
Yes their are some Kernels for both model ,for flashing them just the steps are given in there Original posts they are simple just need to flash them via CWM
Sent from my GT-S5830i using xda app-developers app
Help me
I try to do what you said above, but Odin has to step it
<ID:0/004> NAND Write Start!
<ID:0/004> BcmCP.img
<ID:0/004> boot.img
<ID:0/004> system.img
I attached a picture to see more precisely. What should I do not get any phone in recovery mode (Power On + Volume Up + Home).
HELP ME.
Works great. +1
hey man,
im a newbie here, can you help me unbrick my galaxy ace s5830i , ived looked at several how to tutorials but im just haveing a problem on finding an australian stock rom for my phone! , please help , it would be a pleasure
Please help!
Hi guys,
I'm a newbie, and I decided to root my phone yesterday. Once it was rooted successfully, i tried flashing a couple of ROMS (Ace of spades & Slimbean) and both didn't work because of an rror in the file. I then downloaded Razodroid 2.5, and insatlled it (after installing CWM 5), it said installation complete and i tried to reboot my phone, but its stuck on the logo screen. I've looked at so many different tutorials to unbrick it, downloaded all the different setups needed, but the problem is that it just won't go into recovery.
If i press down all the buttons, the logo comes on once, and then just stays blank for as long as i hold the buttons down, and if i let go of the buttons the logo comes up again and stays there.
I tried doing it through ODIN, but if it won't go in to recovery mode how do i get it to work? It doesn't even connect to the computer.
Please help me, I am really upset and frustrated by this, and no longer have a phone. I am at my wits end. Please tell me how to fix this.
Q&A for [GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can't root my tab, Heimdall can't find "RECOVERY"
Help, I'm trying to root my GAlaxy Tab 10.1 WiFi. First of all, the ODIN program and Heimdall GUI ask for gz.tar files, but all the recovery files I download are .img files....?? Well I'm trying to put TWRP on my Tab through Heimdall command line (I'm on Linux), but I get this error:
Code:
ERROR: Partition "RECOVERY" does not exist in the specified PIT.
I have tried typing RECOVERY both in upper cases and lower cases.
After this, the device just reboots into stock ROM.
The command I am using is
Code:
sudo heimdall flash --RECOVERY recovery.img --no-reboot
Any ideas?
I'm not familiar with Heimdall, so if possible try to use Odin. Go to http://droidbasement.com/db-blog/?p=3158 and download the recovery.tar.md5 for your tab version, launch Odin, connect your tab, select PDA and choose the recovery.tar.md5 file and flash. And then you can flash the twrp zip file from AAcount's Omni ROM thread through recovery. To root, the easiest and most updated way is to simply flash the SuperSU zip from recovery. http://download.chainfire.eu/supersu
Sent from my GT-P7500 using Tapatalk
Where's Link
Where is the download link?
Guys
Urgent help
I am trying to repair my friends galaxy 10.1 tab which she tried to root nd wasn't a success.
I tried flashing stock rom but it is stuck on Samsung logo
Initial boot loader was high on android
Tried wiping cache nd reset factory all done but gives efs error too
Restart nd stuck again
Plz help
Swapyyyyy said:
Guys
Urgent help
I am trying to repair my friends galaxy 10.1 tab which she tried to root nd wasn't a success.
I tried flashing stock rom but it is stuck on Samsung logo
Initial boot loader was high on android
Tried wiping cache nd reset factory all done but gives efs error too
Restart nd stuck again
Plz help
Click to expand...
Click to collapse
Are you sure it's a p7510/7500 galaxy tab?
Sent from my Nexus 7 using XDA Free mobile app
It's n8000 galaxy note
Swapyyyyy said:
It's n8000 galaxy note
Click to expand...
Click to collapse
Then you're in the wrong forum. If you ask your question in the right forum they will be able to help you.
Sent from my Z1 Compact
open links
I am having no luck opening links in the forum. Is it me, or my computer?
Shotweb said:
Help, I'm trying to root my GAlaxy Tab 10.1 WiFi. First of all, the ODIN program and Heimdall GUI ask for gz.tar files, but all the recovery files I download are .img files....?? Well I'm trying to put TWRP on my Tab through Heimdall command line (I'm on Linux), but I get this error:
Code:
ERROR: Partition "RECOVERY" does not exist in the specified PIT.
I have tried typing RECOVERY both in upper cases and lower cases.
After this, the device just reboots into stock ROM.
The command I am using is
Code:
sudo heimdall flash --RECOVERY recovery.img --no-reboot
Any ideas?[/QUOTE
Have you tried WINE..I use it in xubuntu 14.10 and run Odin in it
Click to expand...
Click to collapse
perfect instructions! Thanks!
perfect instructions! Thanks!
Looking for the downloads
I know this is old but do you have another location where I can find these downloads? I need a recovery file for my 10.1
thanks
Joe
Galaxy Tab 3 GT-P5210. Root links removed!
Why are the links removed? I want those links badly
Hello! Since everything here seams to be outdated I'm going to add my own little guide right here.
I tried to put this in the main thread, but was unable to.
This worked fine for me.
I Started with Stock Android ICS + stock recovery and ended up with rooted stock + ClockWorkMod recovery.
Rooting GT-P7500 (3G):
(I'm sure this works with whatever model you have.)
Downloads:
Odin3 v3.10.6:http://forum.xda-developers.com/showthread.php?t=2711451
ClockWorkMod:http://www.clockworkmod.com/rommanager
Caboomi's Recovery img2tar odin maker:http://forum.xda-developers.com/showthread.php?t=2281287
SuperSU:https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Installation:
Put the UPDATE-SuperSU zip file on your tablets sdcard.
Convert your recovery image to odin flashable tar file with Caboomi's nifty script. (If you get any errors just read the thread.)
Make sure you have USB-drivers installed
Start Odin on your PC.
Go in to download mode on tablet.
Connect tablet to PC, click AP, choose your recovery tar file and flash.
Reboot in to your tablets new recovery.
Install the SuperSU application.
Press Thanks button.
Reboot, done!
Galaxy Tab 10.1 Root Guide by djR3Z
Hello,
I don't have a noob question, I just need the links updated in the "[GUIDE] How to Root the Samsung Galaxy Tab 10.1 [Video Walkthrough]" by djR3Z. I have a friend who has this tablet and still uses it so I need the links updated please. He has the Samsung Galaxy Tab 10.1 P7510 wifi only. I see dennyhhh has posted links but do they work for the Samsung Galaxy Tab 10.1 P7510 wifi only? Yea, he wants to update from the Android Honeycomb version, I dont blame him!!
Thank you.
Where can I find links, I need it.
Thanks!
Missing links
I feel like I'm overlooking the links...but I don't see them.
2017 update
Hi everyone, I just rooted my galaxy tab 10.1 wifi and it was difficult to find the files, hopefully I can help someone in trouble.
First of all, dennyhhh thanks a lot for the instructions, that was clear but unfortunately the clock work mode doesn't work that way now. So I'll cite what dennyhhh said:
Rooting GT-P7500 (3G):
(I'm sure this works with whatever model you have.)
Downloads:
Odin3 v3.10.6:http://forum.xda-developers.com/show....php?t=2711451
ClockWorkMod:http://www.clockworkmod.com/rommanager
Caboomi's Recovery img2tar odin maker:http://forum.xda-developers.com/show....php?t=2281287
SuperSU:https://download.chainfire.eu/696/Su...erSU-v2.46.zip
Installation:
Put the UPDATE-SuperSU zip file on your tablets sdcard.
Convert your recovery image to odin flashable tar file with Caboomi's nifty script. (If you get any errors just read the thread.)
Make sure you have USB-drivers installed
Start Odin on your PC.
Go in to download mode on tablet.
Connect tablet to PC, click AP, choose your recovery tar file and flash.
Reboot in to your tablets new recovery.
Install the SuperSU application.
Press Thanks button.
Reboot, done!
So it was not very clear to me how to use the Caboomis script so I ended up downloading the tar file that is mention on original post:
https://www.androidfilehost.com/?fid=529152257862684556
I also used a really old version of Odin, It was 1.3
Also, If you have troubles to get in the download mode you must press Power button + low volume button and when the galaxy logo shows, inmedialty let the power button go while still pressing the low volume button.
I guided myself with dennyhhh post and also the original post, the difference is that I installed the superSU instead of Samsung_Galaxy_Tab_10.1_root.zip on recovery mode.
That's all Fellas!!! By the way the clockrom is now an app you can download from the market after the root:good:
---------- Post added at 12:53 AM ---------- Previous post was at 12:49 AM ----------
2017 update
Hi everyone, I just rooted my galaxy tab 10.1 wifi and it was difficult to find the files, hopefully I can help someone in trouble.
First of all, dennyhhh thanks a lot for the instructions, that was clear but unfortunately the clock work mode doesn't work that way now. So I'll cite what dennyhhh said:
Rooting GT-P7500 (3G):
(I'm sure this works with whatever model you have.)
Downloads:
Odin3 v3.10.6:http://forum.xda-developers.com/show....php?t=2711451
ClockWorkMod:http://www.clockworkmod.com/rommanager
Caboomi's Recovery img2tar odin maker:http://forum.xda-developers.com/show....php?t=2281287
SuperSU:https://download.chainfire.eu/696/Su...erSU-v2.46.zip
Installation:
Put the UPDATE-SuperSU zip file on your tablets sdcard.
Convert your recovery image to odin flashable tar file with Caboomi's nifty script. (If you get any errors just read the thread.)
Make sure you have USB-drivers installed
Start Odin on your PC.
Go in to download mode on tablet.
Connect tablet to PC, click AP, choose your recovery tar file and flash.
Reboot in to your tablets new recovery.
Install the SuperSU application.
Press Thanks button.
Reboot, done!
So it was not very clear to me how to use the Caboomis script so I ended up downloading the tar file that is mention on original post:
https://www.androidfilehost.com/?fid=529152257862684556
I also used a really old version of Odin, It was 1.3
Also, If you have troubles to get in the download mode you must press Power button + low volume button and when the galaxy logo shows, inmedialty let the power button go while still pressing the low volume button.
I guided myself with dennyhhh post and also the original post, the difference is that I installed the superSU instead of Samsung_Galaxy_Tab_10.1_root.zip on recovery mode.
That's all Fellas!!! By the way the clockrom is now an app you can download from the market after the root
I have lastest version of stock rom for i8552.
All new firmware users have some root problems. And I have never root my device so My device is not rooted ,(original firmware)
I want to install old version of stock rom .Can you help me . How to install old version for this device ?
Have you any idea ?
I want to install that version , PDA: I8552XXAMK2
current verison on device is I8552XXANF2.
And I never root my device. Please help me
Visit the following thread for rooting with CWM.
http://forum.xda-developers.com/showthread.php?t=2494471
For flashing back to previous stock rom download the stock rom from sammobile or samsung-updates.com and flash it with Odin.
Sent from my GT-I8552 using Tapatalk
devesh9 said:
Visit the following thread for rooting with CWM.
http://forum.xda-developers.com/showthread.php?t=2494471
For flashing back to previous stock rom download the stock rom from sammobile or samsung-updates.com and flash it with Odin.
Sent from my GT-I8552 using Tapatalk
Click to expand...
Click to collapse
I know this topic . But Samsung has new security on new Stock Firmware updates. All users have new updates said that .
Please explain it ,
I have downloaded old stock rom on sammobiles. But How to flash it ?
as a normal flashing ? without root ?
Sorry I am a beginnger user for this.
Dear friend,
Install USB Drivers or install Samsung Kies . kies will install the necessary drivers automatically.
1. First be sure USB Debugging is checked in ur device ( Settings/Developer Options/USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release Power Button but keep others pressed. You should have a triangle with an android janitor while it's saying downloading ..VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.( stock ROM file)
7. Dont check any other option (F.reset time and Auto reboot are checked by default).
8. Now click Start.
9. When it's finished, it should say that "Res OK" or "PASS"in Odin.
10. Now the phone will restart and you will have the stock firmware as per your requirements.
You don't need root to flash ROM thru Odin.
If you want to root search for framaroot.apk in XDA .
Sent from my GT-I8552 using Tapatalk
Hi friends here is my post about samsung galaxy star advance(sm-g350E).
Here are the stock kernel & stock recovery for galaxy star advance.
Those who want unroot their device & receive software updates.
follow this method:-
1: download those two files from the attachments.
2: connect ur device(in download mode) to pc & let it detect by odin.
3: flash this file one by one by selecting them in pda or ap in odin.