Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
JuliusAlfred77 said:
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
Click to expand...
Click to collapse
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Ok.Thanks sir :thumbup:
Sent from my Lenovo A390_ROW using xda app-developers app
Red triangle dead android still appears even with your cwm
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
cappa72 said:
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Click to expand...
Click to collapse
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
There can be many reasons for not having the CWM.
You mentioned that you could flash the CWM.
I have not used ROM manager for MTK platform - I don't know if it is compatible with it. I used Mobileuncletools instead: you can change recovery with this program (can be downloaded from PlayStore - free app)
Right after you change the recovery from stock to CWM, then you have to enter into it.
And then make a backup directly from CWM.
This is my suggestion.
Also, I would recommend that run the chinese application remover, right after entering the CWM.
The reason why I suggest it that the stock rom can contain patches, which rewrite all the modified recovery to stock.
can i flash twrp recovery with same scatter file to remove cwm
One more question. I found on several forums that TWRP recovery works for Lenovo A390 and can be flashed using SPFlashtool. Will flashing the TWRP recovery overwrite the CWM recovery, if I use the same scatter file. I guess the scatter file provides the start and end address for flashing into ROM.
chokybali said:
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
Click to expand...
Click to collapse
Hello,
I visited TWRP site as well as CWM recovery site. Niether of them supports Lenovo_A390_ROW, not listed. I guess coz the brand is new to the market. ROM Manager too complains that the phone model is not supported and I should wait until an official recovery from CWM is available. However, I googled and got one CWM recovery by cappa for Lenovo_A390 but got the dead android triangle. Then, I googled and got a TWRP recovery for Lenovo_A390_Row and flashed this one too (some friends suggested flashing with same scatter file overwrite the previous CWM). But, I still get the dead andorid with triangle icon. What is wrong? I guess the recovery images that I am flashing are not correct. Do you have the correct TWRP recovery image for Lenovo_A390_ROW?
How can I use SPflashtool and make the downloaded cwm 6.012 a scatter file?
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
I downloaded SPflashtool and the CWM recovery image. It says I need a scatter file and it couldn't continue. How do I make that CWM recovery image a scatter file to flash and how do you flash that into the phone using SPflasher? Do I need ROM Manager for that?
Related
Hello. I have recently bought YuanDao(Window) N70S tab, but it has been turning off every time i launched any app. I flashed ClockWorkMod and tried to flash this RockCream Sandwich ROM. First I wanted just to restart the tab (before installing custom ROM) but it only launched recovery menu), so I decided to flash this ROM. After another restart it just went dead. It's not recognized by RKAndroidTool, but my PC recognizes it, but i can't access its memory. Can be something done about this? Sorry for my English, because it's not my native language.
You can't install CWM on N70S.
Use RKbatchtool and revert to stock 4.1.1
Rayman96 said:
You can't install CWM on N70S.
Use RKbatchtool and revert to stock 4.1.1
Click to expand...
Click to collapse
You can install CWM, for the N70S fun_ has created a recovery for it and can be found here:
http://forum.xda-developers.com/showthread.php?t=2102679
I have a rooted n70s and cannot figure out how to install cwm recovery. I get the droid with the red triangle when I boot to recovery using both cwm ROM manager, quick boot, or the volume buttons. Is there another way to flash it?
Sent from my XT1056 using Tapatalk
I know it's kinda stupid to ask about this stuff. but i'm completely stuck with this bootloop thing.
so i got this Tiphone A508 with mt6572 inside. the spec is android 4.2.2, 3.5inch screen, 320x480pixels, dual camera (2mp and vga), and this writing in the 'about phone' :
moly.wr8.w1315.md.wg.mp.v15.p1
that's all i can remember about my phone because the cellphone is now in bootloop state. it happened after i installed a new font using ifont from the playstore. and the stupid thing about it is i don't have any usable backup.
i thought i had installed cwm recovery on the phone but i was mistaken, it was just the stock recovery (recovery 3e). and the backup i made with the stock recovery is completely useless.
i'm kinda lost of what to do now? i tried installing flashable zip stock jellybean font via the stock recovery but it always said 'installation aborted'
please someone tell me what to do
thanks
Find a TWRP recovery for your phone. The one flashable via stock recovery. And if it was a apk, try formatting/reset via stock recovery. Thanks!
Sent From My Samsung Galaxy Y s5360
Wickedfire.214 said:
Find a TWRP recovery for your phone. The one flashable via stock recovery. And if it was a apk, try formatting/reset via stock recovery. Thanks!
Sent From My Samsung Galaxy Y s5360
Click to expand...
Click to collapse
been searching for any cwm or twrp for my device but no luck. i don't know what the real brand of my phone. Tiphone is just a rebrand in my country, but in China it must have its own name. So it's kinda difficult to find suitable cwm or twrp for my device.
Can i just use cwm recovery.img from another mt6572 device?
Hello,
I followed this post to root and install TWRP recovery on my Sprint Samsung Note 3. The root procedures went well, showing rooted successfully.However, I installed TWRP recovery using GooManager, and also tried installig through Odin.
It shows that TWRP recovery is successfully installed, but I am not able to boot into recovery. The phone seems to try to boot into TWRP for ever.....
Later I read this post, which says that Do not try on Android 4.4.2 KitKat firmware!
IS my issue due to my rooting and installing TWRP are based on 4.4.2 (my phone is having new NC5 OTA update)? How shall I do?
Thank you very much for your helps!!!
Did you fiqure it out
Sent from my SM-G900P using XDA Free mobile app
lsdyna said:
Hello,
I followed this post to root and install TWRP recovery on my Sprint Samsung Note 3. The root procedures went well, showing rooted successfully.However, I installed TWRP recovery using GooManager, and also tried installig through Odin.
It shows that TWRP recovery is successfully installed, but I am not able to boot into recovery. The phone seems to try to boot into TWRP for ever.....
Later I read this post, which says that Do not try on Android 4.4.2 KitKat firmware!
IS my issue due to my rooting and installing TWRP are based on 4.4.2 (my phone is having new NC5 OTA update)? How shall I do?
Thank you very much for your helps!!!
Click to expand...
Click to collapse
You should be suing TWRP 2.7.0.1 and do not use goo manager.. Go to their site and click on the alternate download.. I do believe TWRP mentioned they disable the goo manage download because of issues.. Make sure you are also choosing the right phone.. I have choosing the wrong phone more than once.. Also when your done flashing in odin, and you reboot into recovery manually, make sure you wait until you see the line about recovery, before you release the 3 buttons, or you will just boot into your desktop.. Also you can use TWRP on KItKat firmware as many have done so..
Hi everyone, please I need help with my umi x2, I had cwm installed and had created all my backups successfully, I then changed my recovery to carliv touch recovery without issues.
I now tried to go back to normal cwm but carliv recovery wouldn't change. I was fustrated and mistakenly flashed a twrp recovery which wasn't for my phone and now I can't go back to cwm or carliv touch recovery which means I can't boot back into recovery. Each time I try to boot into recovery, it the phone hangs on the boot screen then after that it restarts and loads the android os to the home screen.
Any help on how to bout back to cwm will be most appreciated.
Thanks
Man install
Friend Install TWRP is more simple, and stable, CMW is good, but TWRP is better, this is my opinion
Look how to flash ur stockrom and make it. After that make the steps for the Cwm recovery and I can restore ur nandroid.
Gesendet von meinem Xperia SP
Or...
or install the Stock ROM Using a compatible Flasher (as well as Odin is the Flasher compatible with Samsung) and after that install A Recovery (Recommend the TWRP)
Please can you give me a link for twrp for UMI X2, I can't seem to be able to find it. Thanks for the effort.
OceanDEV said:
Friend Install TWRP is more simple, and stable, CMW is good, but TWRP is better, this is my opinion
Click to expand...
Click to collapse
Please can you give me a link to download the twrp recovery for my UMI X2?
OceanDEV said:
or install the Stock ROM Using a compatible Flasher (as well as Odin is the Flasher compatible with Samsung) and after that install A Recovery (Recommend the TWRP)
Click to expand...
Click to collapse
I have a new lava iris 506Q about which there is no
discussion on XDA ,which is rooted by me by framaroot.
It works fine everything after root and using many
rooted apps like system tuner, lucky patcher etc. But
when I try to backup my device by ROM toolbox pro it
state that there is no cwm recovery and reboots to my
stock recovery where I can only backup the userdata.
Then I googled for cwm recovery . And I got nothing
about lava iris 506Q. So I think to flash iris 504Q's
cwm recovery . I did this by using "flashify pro" android
flashing app It flashed it and reboots.
Then I checked whether it is done or not. When I want
to reboots to recovery by pressing home+volume.
+power key it does not boots to recovery mode rather it
boots to normal mode. Now I can use my android phone
rooted smoothly but I Lost my stock recovery for which
I can not reset my device and can not go to stock recovery and
my phone is now restricted.
Please help. I know it was my fault to flash wrong
recovery. But plz help I don't have any stock recovery
but I have stock ROM of my device and my device is
now rooted.
What can be done????? can a cwm recovery flash solve it. but there is no cwm recovery cirrently available on XDA / so please upload it or tell me yhe way to solve it . plzzzzz