Hi everyone, please I need help with my umi x2, I had cwm installed and had created all my backups successfully, I then changed my recovery to carliv touch recovery without issues.
I now tried to go back to normal cwm but carliv recovery wouldn't change. I was fustrated and mistakenly flashed a twrp recovery which wasn't for my phone and now I can't go back to cwm or carliv touch recovery which means I can't boot back into recovery. Each time I try to boot into recovery, it the phone hangs on the boot screen then after that it restarts and loads the android os to the home screen.
Any help on how to bout back to cwm will be most appreciated.
Thanks
Man install
Friend Install TWRP is more simple, and stable, CMW is good, but TWRP is better, this is my opinion
Look how to flash ur stockrom and make it. After that make the steps for the Cwm recovery and I can restore ur nandroid.
Gesendet von meinem Xperia SP
Or...
or install the Stock ROM Using a compatible Flasher (as well as Odin is the Flasher compatible with Samsung) and after that install A Recovery (Recommend the TWRP)
Please can you give me a link for twrp for UMI X2, I can't seem to be able to find it. Thanks for the effort.
OceanDEV said:
Friend Install TWRP is more simple, and stable, CMW is good, but TWRP is better, this is my opinion
Click to expand...
Click to collapse
Please can you give me a link to download the twrp recovery for my UMI X2?
OceanDEV said:
or install the Stock ROM Using a compatible Flasher (as well as Odin is the Flasher compatible with Samsung) and after that install A Recovery (Recommend the TWRP)
Click to expand...
Click to collapse
Related
need some help please. just did something pretty dumb in a moment of not thinking. i went into rom manager and flashed cwm recovery (I'm using Hairy Bean 1.51 with TWRP) over the damn TWRP recovery, then did a system backup through rom manager. now I can boot into the rom, but no chance of recovery (as i'm guessing there is a twrp/cwm and possibly jb/ics conflict - if the rom manager flashed ics cwm recovery)
how do I get back my twrp recovery?
NB. Rom manager shows both TWRP recovery as well as CWM flashed and I can choose which i want to use... but when I pick TWRP, I still cannot access recovery. Is there an ADB command I can use to remove CWM and then reinstall TWRP? (I already tried installing the TWRP over it hoping to overwrite, but both recoveries still exist)
FIXED, NM.
radici said:
need some help please. just did something pretty dumb in a moment of not thinking. i went into rom manager and flashed cwm recovery (I'm using Hairy Bean 1.51 with TWRP) over the damn TWRP recovery, then did a system backup through rom manager. now I can boot into the rom, but no chance of recovery (as i'm guessing there is a twrp/cwm and possibly jb/ics conflict - if the rom manager flashed ics cwm recovery)
how do I get back my twrp recovery?
NB. Rom manager shows both TWRP recovery as well as CWM flashed and I can choose which i want to use... but when I pick TWRP, I still cannot access recovery. Is there an ADB command I can use to remove CWM and then reinstall TWRP? (I already tried installing the TWRP over it hoping to overwrite, but both recoveries still exist)
FIXED, NM.
Click to expand...
Click to collapse
Tell people who you fixed it FFS!
how did you fixed ?
radici said:
need some help please. just did something pretty dumb in a moment of not thinking. i went into rom manager and flashed cwm recovery (I'm using Hairy Bean 1.51 with TWRP) over the damn TWRP recovery, then did a system backup through rom manager. now I can boot into the rom, but no chance of recovery (as i'm guessing there is a twrp/cwm and possibly jb/ics conflict - if the rom manager flashed ics cwm recovery)
how do I get back my twrp recovery?
NB. Rom manager shows both TWRP recovery as well as CWM flashed and I can choose which i want to use... but when I pick TWRP, I still cannot access recovery. Is there an ADB command I can use to remove CWM and then reinstall TWRP? (I already tried installing the TWRP over it hoping to overwrite, but both recoveries still exist)
FIXED, NM.
Click to expand...
Click to collapse
Please help , I'm having exactly the same issue.
OS is booting correctly, but I'm not able to enter in any recovery mode, neither in CWM or TWRP..: confused:
radici said:
FIXED, NM.
Click to expand...
Click to collapse
These forums become useless if the knowledge is not captured. It is awesome that you fixed it, but please let us know briefly HOW you fixed it!!
sparkdroid said:
These forums become useless if the knowledge is not captured. It is awesome that you fixed it, but please let us know briefly HOW you fixed it!!
Click to expand...
Click to collapse
Same issue here too' please share how you fixed it.
Hello!
I have a problem with my Jiayu G3, I rooted it using Bin4ry's method, and used CWM to flash Android 4.1.2 , all was finished well, but whenever I tried to powe the phone , it always went into a boot loop. I read somewhere to try and flash Lewa Recovery using CWM, and now the G3 won't even boot into CWM and Android.
Any help is much appreciated. Thank you.
Wade Tyler said:
Hello!
I have a problem with my Jiayu G3, I rooted it using Bin4ry's method, and used CWM to flash Android 4.1.2 , all was finished well, but whenever I tried to powe the phone , it always went into a boot loop. I read somewhere to try and flash Lewa Recovery using CWM, and now the G3 won't even boot into CWM and Android.
Any help is much appreciated. Thank you.
Click to expand...
Click to collapse
I think you will have to flash a new rom using mtk sp flash tool. You may have to try several versions before one works. Jiayu.es (in Spanish) should have all the files you need. Or, hopefully you made a backup and can just reflash cwm recovery and restore.
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
JuliusAlfred77 said:
Hi I Have a Lenovo A390 and I'm Having
Trouble going into the recovery
mode,Everytime I Boot Into Recovery
Mode,A dead android icon with a Red
Triangle Appears and nothing happens
(The Icon is like this> cdn.howtogeek.com/wp-content/
uploads/2012/12/android-recovery-
mode.jpg ) I waited 2-3 minutes and still
Nothing happens,What should i do?Should
i install a custom recovery? Or what. I'm
on stock and my phone is rooted,I rooted
it using framaroot. Please Help Me.
Thanks.
Click to expand...
Click to collapse
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Ok.Thanks sir :thumbup:
Sent from my Lenovo A390_ROW using xda app-developers app
Red triangle dead android still appears even with your cwm
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
cappa72 said:
The stock recovery what you have got.
If you press the home button, you can see the menu.
If you want to install a custom recovery, you can use my ported CWM, which works. This recovery is based on bgcngm ZTE V970 recovery, using his mtktools.
CWM 6.0.1.2 for Lenovo A390
md5sum : 8ef0d0a92682a93fe147436d0ce20549
You can install it - considering that your phone is rooted - with the help of MobileUncleTools; Possible ways from A820 thread.
Click to expand...
Click to collapse
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
There can be many reasons for not having the CWM.
You mentioned that you could flash the CWM.
I have not used ROM manager for MTK platform - I don't know if it is compatible with it. I used Mobileuncletools instead: you can change recovery with this program (can be downloaded from PlayStore - free app)
Right after you change the recovery from stock to CWM, then you have to enter into it.
And then make a backup directly from CWM.
This is my suggestion.
Also, I would recommend that run the chinese application remover, right after entering the CWM.
The reason why I suggest it that the stock rom can contain patches, which rewrite all the modified recovery to stock.
can i flash twrp recovery with same scatter file to remove cwm
One more question. I found on several forums that TWRP recovery works for Lenovo A390 and can be flashed using SPFlashtool. Will flashing the TWRP recovery overwrite the CWM recovery, if I use the same scatter file. I guess the scatter file provides the start and end address for flashing into ROM.
chokybali said:
U need to install TWRP, coz a390 doesn't have default recovery. Ask Google for TWRP, install using flashtool.
Sent from my Lenovo A390_ROW
Click to expand...
Click to collapse
Hello,
I visited TWRP site as well as CWM recovery site. Niether of them supports Lenovo_A390_ROW, not listed. I guess coz the brand is new to the market. ROM Manager too complains that the phone model is not supported and I should wait until an official recovery from CWM is available. However, I googled and got one CWM recovery by cappa for Lenovo_A390 but got the dead android triangle. Then, I googled and got a TWRP recovery for Lenovo_A390_Row and flashed this one too (some friends suggested flashing with same scatter file overwrite the previous CWM). But, I still get the dead andorid with triangle icon. What is wrong? I guess the recovery images that I am flashing are not correct. Do you have the correct TWRP recovery image for Lenovo_A390_ROW?
How can I use SPflashtool and make the downloaded cwm 6.012 a scatter file?
ZaiduPaidu said:
Hello Cappa. I too have rooted my Lenovo A390 using framaroot. and installed ROM Manager. Initially, ROM manager complained there is no clockworkmod recovery for my device model. I then flashed your clockworkmod recovery using spflashtool. Successful and ROM Manager finally detcted my clockworkmod too as version 5.x.x.x.. But, then when i tried to backup my current ROM, phone reboots and tries to enter recovery mode. But, then the dead android killed by a red triangle still appears. Help me!!!! Somewhere i read that it is the stock recovery icon and the phone should still be able to enter recovery mode using volume up, down buttons. Is it true. Somewhere, I read that TWRP must be used instead, because LENOVO A390 does not have cutom recovery. What should I do next? Suggest. If TWRP should be installed, I would wish to remove CWM first. Is it possible to remove CWM, after it has been flashed?
Sorry for lots of questions.
Will be grateful for your help.
Regards
Click to expand...
Click to collapse
I downloaded SPflashtool and the CWM recovery image. It says I need a scatter file and it couldn't continue. How do I make that CWM recovery image a scatter file to flash and how do you flash that into the phone using SPflasher? Do I need ROM Manager for that?
Is it ok to flash twrp over cwm or do i need to remove cwm first. Hi i have been searching for this particular topic and found no definite answer. I am currently trying to flash blisspop rom on my phone and it says to use the latest twrp recovery. The problem is I have cwm installed on my phone. So my question is ok to flash twrp over cwm or set my default recovery to twrp
@onedaynerd: simply replace CWM with TWRP 2.8.6.1 by Odin. Ashame TWRP can't read/restore CWM-backups.
onedaynerd said:
Is it ok to flash twrp over cwm or do i need to remove cwm first. Hi i have been searching for this particular topic and found no definite answer. I am currently trying to flash blisspop rom on my phone and it says to use the latest twrp recovery. The problem is I have cwm installed on my phone. So my question is ok to flash twrp over cwm or set my default recovery to twrp
Click to expand...
Click to collapse
As far as I know, there will/can be only one recovery. Any recovery can be overwritten by the other. Just flash the new recovery and it automatically replaces the old one.
Example, If you are currently having CWM then boot into CWM recovery and flash the TWRP recovery zip file and reboot the device. Check the recovery by booting into recovery again. Now you will find TWRP as your recovery. CWM will be gone.
Hello everybody! i hope everyone is good
the other day i decided to try to install CWM so i could install Xposed Firmware on a phone that wasnt on the list i have an MLS IQTalk Flame 4G iQ1502A that runs Andorid 5.1 Lollipop and its rooted via King Root so after installing Clockwork recovery i realized the sickening mess of my ways...now i have NO recovery whatsoever stock is gone and CWM aint even there,the phone boots normally and i can use it but i cant boot into the recovery mode,im scared stupid right now and dont have any money for a new phone can somebody here please help me ?
You can flash stock recovery with flashify
DeadSquirrel01 said:
You can flash stock recovery with flashify
Click to expand...
Click to collapse
i tried using flashify but its like my stock recovery has got corrupted or something,i really messed up...which is weird for me since i have been installing ROMs and everything on multiple phones over the years...but still thank you
Maybe you corrupted recovery partition, to solve this you can flash any working recovery