Related
Ok well, after succesfully installing the original 2.2.2 rom through KDZ in emergency mod, i decided to roll back to 2.2, so i opened KDZ again and started flashing it.. well, at a point it just crashes.. I said "no worries, let's start over again".
I tried to flash again but i was getting multiple errors or crashes, so i decided to turn the phone off and unplug it from the USB.
After replugging, KDZ stopped recognising it and now im stuck at a forced emergency screen unable to flash the original rom back... any chance to fix it or it's definitely dead?
EDIT: By turning off the battery, disabling modem device on pc and connecting usb i could manage to start KDZ update. During the installation I got an error so I couldn't finish it. Tried many times without results. I was stuck in emergency mode. After doing the same steps, phone doesn't even turn on.. i guess it's a bye bye now :/
enriquez90 said:
Ok well, after succesfully installing the original 2.2.2 rom through KDZ in emergency mod, i decided to roll back to 2.2, so i opened KDZ again and started flashing it.. well, at a point it just crashes.. I said "no worries, let's start over again".
I tried to flash again but i was getting multiple errors or crashes, so i decided to turn the phone off and unplug it from the USB.
After replugging, KDZ stopped recognising it and now im stuck at a forced emergency screen unable to flash the original rom back... any chance to fix it or it's definitely dead?
EDIT: By turning off the battery, disabling modem device on pc and connecting usb i could manage to start KDZ update. During the installation I got an error so I couldn't finish it. Tried many times without results. I was stuck in emergency mode. After doing the same steps, phone doesn't even turn on.. i guess it's a bye bye now :/
Click to expand...
Click to collapse
follow error guide http://forum.xda-developers.com/showthread.php?t=883314
just follow some instruction for downgrading http://forum.xda-developers.com/showthread.php?t=1038338 like disabling modem,phone charge screen time out,lg pc suite ,removing sd card etc and then use the error guide
I Recommend do not switch phone off. There was some people, which done it and after they was not be able to turn it on again.
Click to expand...
Click to collapse
I guess this is enough
Will send it to LG tomorrow
I just wonder, will it be on warranty? There was no superadmin installed before it got bricked, and there was the official 2.2.2 rom on it. Can they know if before that I installed custom roms? If so, does anyone know how much I would have to pay to get it back working?
thanks in advance
enriquez90 said:
I guess this is enough
Will send it to LG tomorrow
I just wonder, will it be on warranty? There was no superadmin installed before it got bricked, and there was the official 2.2.2 rom on it. Can they know if before that I installed custom roms? If so, does anyone know how much I would have to pay to get it back working?
thanks in advance
Click to expand...
Click to collapse
Why were u downgrading when root for froyo 2.2.2 and 2.2.1 is available ?
You must try again by reading all the tutorials to bring back the dead phone. Its true that once you disconnected the phone, its not easy to bring back but try on other machine/pc. People has recover it even when they disconnect the phone.
Or
If you are taking it to LG service center, tell them you were updating the phone, but it crashed and didnt bootup. If they ask you anything about custom rom, tell them you dont know anything about that and this is your first android phone and they would repair it in warranty.
From my opinion, they will repair the phone as you haven't installed any recovery, rom yet.
If they are not repairing it in warranty, the charges could cost as much as you can buy a new phone.
Good luck.
Well the phone is not responding at all, tried to pull off the battery for many hours and then pull it back in to try charging it and next turn it on, but I didn't get the expected results..
"Good" new is that phone completely on stock settings as I just did the original 2.2.2 update and didn't have root and custom recovery aswell... they shouldn't be able to check if i had custom roms/recovery as mainboard should be completely gone :/
I will definitely take it to LG service next week in the spare time..
Hi,
I have an Xperia X10 with Cyagenmod 6 (gingerbread 2.3.3) but it's broken. It won't boot any more. Some days ago it just went out, and it won't start up again. The phone behaves as if it freezes the moment android should load. Like if your computer would freeze in bios, unable to load your operating system.
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
I am kind of a noob with these things and therefore hope one of you guys could help me out. I'm not really looking foreward te buying a new phone already
Thanks!
Freekh
kinda same problem..
i'm removing battery, put back and after holding power the phone shows green led for short time and vibrates for a sec and that's.
add:
i've flashed it before the problem occurs.. flashed, phone booted up, everything normal.. put on usb for charging, changed language and time when it suddenly freezed
This is what happened to mine what country u in
sent with a geordie kiss using wb 2.3.3
what do you mean with "country"?
freekh said:
Hi,
I have an Xperia X10 with Cyagenmod 6 (gingerbread 2.3.3) but it's broken. It won't boot any more. Some days ago it just went out, and it won't start up again. The phone behaves as if it freezes the moment android should load. Like if your computer would freeze in bios, unable to load your operating system.
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
I am kind of a noob with these things and therefore hope one of you guys could help me out. I'm not really looking foreward te buying a new phone already
Thanks!
Freekh
Click to expand...
Click to collapse
Try re-flashing the stock rom using flashtool. That solves Every problem for me ^^
freekh said:
Hi,
...
I'm also not able to repair it with SEUS because although it recognizes the phone, it can't reset because the phone freezes just before the stage in witch it can reset.
...
Click to expand...
Click to collapse
not able to flash anything
blmn1337 said:
not able to flash anything
Click to expand...
Click to collapse
Why exactly are u unable to flash anything? Are you following the proper procedure?
Here's a guide fro using flashtool http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
fawadmir said:
Why exactly are u unable to flash anything? Are you following the proper procedure?
Here's a guide fro using flashtool http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Click to expand...
Click to collapse
i've posted some logs in other thread
http://forum.xda-developers.com/showthread.php?t=1190540&page=2
umm.. Do u move your mobile when the flashing process is going on? The xperia USB slot is pretty sensitive. Moving the phone can cause it to lose connection and abort the flashing process
28/048/2011 21:48:10 - ERROR - Error flashing. Aborted
i always receive this error if i move my phone.
Notice if you hear the USB device unplug sound from your PC before this error occurs.
^^
fawadmir said:
umm.. Do u move your mobile when the flashing process is going on? The xperia USB slot is pretty sensitive. Moving the phone can cause it to lose connection and abort the flashing process
28/048/2011 21:48:10 - ERROR - Error flashing. Aborted
i always receive this error if i move my phone.
Notice if you hear the USB device unplug sound from your PC before this error occurs.
^^
Click to expand...
Click to collapse
it doesnt seem to be a connection-problem (no usb unplug sounds).
it seems that the phone is in a state, where bootup is not possible
But the phone is not required to boot during flashing. Did you try changing the USB slot on your PC? The one you're connecting your phone to? Try another slot. Sometimes that works too.
fawadmir said:
But the phone is not required to boot during flashing. Did you try changing the USB slot on your PC? The one you're connecting your phone to? Try another slot. Sometimes that works too.
Click to expand...
Click to collapse
same result. can't flash
Me too. Can't flash with Flashtool (latest version), even without moving my phone. It starts flashing, but the progress bar shows of no progress. After a while it just says Error - Abort Flashing. I tried all of my USB port, but nothing changes.
after doing and trying my battery got completely drained (red led blinking) so i left it on the wallcharger for ~1day..
then at sometime it managed to boot up itself.. i left it for charging till 100%
after that i did a few "wipe battery stats" in xrecovery and now it seems to work stable again..
is it possible that messed up battery stats could cause the problem?
Wow, that would be nice.
A question! Was the little led on while charging? Because when I put my phone in the loader, it turns green (as if the battery is completely empty) and after a while it just goes off (when it would normally turn red). Do you have that to?
Putting my phone in the loader now, and waiting till tomorrow! Hope this helps!
yea, i've noticed this with my phone too..
strange led behavior..try to plug the charger first (green led turns on, cant say whether its charging or doing anything else) and then put in the battery and wait
maybe you're lucky and the phone will boot
and report pls
I didn't work. I've put my phone in the loader for over 24 hours, but nothing happened.
But my phone wasn't completely drained. Perhaps that is a condition to make this work. The only question is, how do I drain my battery when I can't turn on my phone?
i have used an 5watt light bulb ^^
connected on + and - and then waited till light goes out
Wel, I connected a little lamp and waited until it went out. Then when I put my battery in my phone and pressed the ON button nothing happend, not even the green light flashing shortly.
When I put my phone in the loader the LED started flashing red. And that whent on for a while until it stoped, and the LED did nothing. Then I waited over 24 hours, but nothing has happend.
When I put my phone in the loader now, it's just like before, the green light burns a little while, then nothing..
it happened to me again.. freeze and then no boot.
but i think i know whats wrong. for my phone i can say, that the battery is ok and the rom/os aswell.
its hardware problem. something is screwed up inside the phone.
when i press the phone at randomly places and hold it + then pushing on-button it boots up
i will open it tomorrow
I was following the phone unlocking guide in a sub-forum got my unlock code, powered off, inserted a different sim, powered on. I didn't get a request for a code; phone started up fine except no network access. I got a message a short while after something like android.phone stopped working.
Turned the phone off, put original sim back in and turned the phone on. All the phone will do is flicker the backlight every couple of seconds. 3-button recovery will take me to "Downloading..." and sit there. Flashing to Gingerbread using Odin will get to the RESET and phone will power off and phone will sit there screen flashing as before.
Anything I can do to resolve this?
russ18uk said:
I was following the phone unlocking guide in a sub-forum got my unlock code, powered off, inserted a different sim, powered on. I didn't get a request for a code; phone started up fine except no network access. I got a message a short while after something like android.phone stopped working.
Turned the phone off, put original sim back in and turned the phone on. All the phone will do is flicker the backlight every couple of seconds. 3-button recovery will take me to "Downloading..." and sit there. Flashing to Gingerbread using Odin will get to the RESET and phone will power off and phone will sit there screen flashing as before.
Anything I can do to resolve this?
Click to expand...
Click to collapse
Hey!
Look HERE. Hope its helping!
CHEERS!
Yep, I just done that. Now the phone will not power on at all. It will show as a device in Odin and Device Manager but no power comes up. It will not even go into recovery either.
russ18uk said:
Yep, I just done that. Now the phone will not power on at all. It will show as a device in Odin and Device Manager but no power comes up. It will not even go into recovery either.
Click to expand...
Click to collapse
Hey!
Firstly: For me worked(not in unlock, but in some other cases, where other soft fails) the STOCK ..XXKC1. Try to flash it. Dose you put you phone in to "Download" mode for Odin?
Where you get that UNLOCK? From here?
These are the questions, what I want answers. Maybe after that I can say surely.
TIA!
CHEERS!
I was following the guide [TUTORIAL]How to Network Unlock Samsung Galaxy Ace Via ADB. Phone didn't ask for unlock code when I put a Vodafone sim in my o2-locked Ace. Shortly after putting the Vodafone sim in it said something like Android.phone force closed.
I can flash any firmware but so far the phone will not boot. The screen will just flash after flashing firmware and I can put it in Downloading recovery but nothing else happens so far.
Could it be something to do with the phone storage being screwed up? I followed the tutorial word for word and got my code and everything.
russ18uk said:
I was following the guide [TUTORIAL]How to Network Unlock Samsung Galaxy Ace Via ADB. Phone didn't ask for unlock code when I put a Vodafone sim in my o2-locked Ace. Shortly after putting the Vodafone sim in it said something like Android.phone force closed.
I can flash any firmware but so far the phone will not boot. The screen will just flash after flashing firmware and I can put it in Downloading recovery but nothing else happens so far.
Could it be something to do with the phone storage being screwed up? I followed the tutorial word for word and got my code and everything.
Click to expand...
Click to collapse
Hey!
Sorry, then. I cant answer. Dont know that. Maybe better to ask in that thread, from where you followed the TUTORIAL, how to unlock.
Go back to that thread and ask in there.
CHEERS!
I,m The owner of the Unlocking post and i feel like i need to help, Last night i was "Playing" ClockWork Recovery and i touched the "Fix Permissions" option, the phone got stucked and i waited like 10 minutes and nothing happend so i long pressed the power button for a hard reset and when the phone turned on it made the same thing that your did, it sended me a message like yours and the phone started acting weird, and throw me a lot of other error messages so i rebooted the phone and the same, so i entered the recovery again and made a wipe/data and calvik cache, turned the phone back on and problem solved, if it does not work try this: http://forum.xda-developers.com/showthread.php?t=1071970 and you can install a custom rom wich is better than stock, i suggest FirstUA-ROM, i hope this was helpfull and im sorry that this happens to your phone.
russ18uk said:
I was following the phone unlocking guide in a sub-forum got my unlock code, powered off, inserted a different sim, powered on. I didn't get a request for a code; phone started up fine except no network access. I got a message a short while after something like android.phone stopped working.
Turned the phone off, put original sim back in and turned the phone on. All the phone will do is flicker the backlight every couple of seconds. 3-button recovery will take me to "Downloading..." and sit there. Flashing to Gingerbread using Odin will get to the RESET and phone will power off and phone will sit there screen flashing as before.
Anything I can do to resolve this?
Click to expand...
Click to collapse
Also to enter the recovery is, Home + Power on button
Jc_master said:
I,m The owner of the Unlocking post and i feel like i need to help, Last night i was "Playing" ClockWork Recovery and i touched the "Fix Permissions" option, the phone got stucked and i waited like 10 minutes and nothing happend so i long pressed the power button for a hard reset and when the phone turned on it made the same thing that your did, it sended me a message like yours and the phone started acting weird, and throw me a lot of other error messages so i rebooted the phone and the same, so i entered the recovery again and made a wipe/data and calvik cache, turned the phone back on and problem solved, if it does not work try this: http://forum.xda-developers.com/showthread.php?t=1071970 and you can install a custom rom wich is better than stock, i suggest FirstUA-ROM, i hope this was helpfull and im sorry that this happens to your phone.
Click to expand...
Click to collapse
Hey!
Thx for dropping in and clearing things.
CHEERS!
Jc_master said:
Also to enter the recovery is, Home + Power on button
Click to expand...
Click to collapse
Hi mate. Thanks for dropping in. I cannot enter recovery; the phone just does what happens in the OP - it just flashes. I can only enter 3-button recovery. So far I've tried 5 different firmware 2 Froyo (inc stock) and 3 different Gingerbreads found droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html. Will try a custom firmware but otherwise will try and take the phone back to o2 tomorrow.
russ18uk said:
Hi mate. Thanks for dropping in. I cannot enter recovery; the phone just does what happens in the OP - it just flashes. I can only enter 3-button recovery. So far I've tried 5 different firmware 2 Froyo (inc stock) and 3 different Gingerbreads found droidangel.blogspot.com/2011/05/samsung-galaxy-ace-s5830-original-stock.html. Will try a custom firmware but otherwise will try and take the phone back to o2 tomorrow.
Click to expand...
Click to collapse
Hey!
Dont take it back to SERVICE, before you not get flashed back to STOCK firmware or they can MAYBE, see that you not in stock firmware. Just saying it, that you DONT get in to trouble, with warranty.
CHEERS!
Yeah too it into o2 this morning. Luckily the dipshits that work there don't know anything. He just plugged it into his laptop and ran Kies. It's being sent off though. Hopefully will be sorted in warranty for free
Hello,
To solve this problem, did you activate the warranty?
I have the same problem, none of the existing ROM work, or find another solution?
I appreciate the help,
mscofield07
Yeah; I sent it back for warranty. They replaced the main PCB.
Can we unlock locked SGA? ?
XDA Rocks!
Ok, where to begin. so i rooted my phone fine. i was trying to attempt to apply some hacks to swap external sdcard with internal but everything said i have to change my bootloader. rooted fine with some Chinese program. i tried rom toolkit for the bootloader unlocker. reboots, but nothing. so i found an APK file that you run on the phone itself, that you hit an unlock button and it reboots. it said it supported my model etc. but now when i turn it on it goes past the MetroPCS screen into a white screen with "Encrypting" and a button saying "Reset Phone". then an error pops up that says "com.android.phone has stopped" then it sits there forever.
Well, i did figure out that if you let the battery die down a warning message pops up like normal warning of low battery. it gives options to hit OK or Battery Use. if i hit battery use it takes me into the settings menu. i can change anything from there. i tried a factory reset from there and nothing. i tried hard reset [buttons] and nothing. i tried flashing the 10B_00.kdz using AIO Toolkit and it fails saying my phone isn't connected. so oi go back into settings and enable debug etc etc, reboot and then try....same failure. doesnt recognize. i uninstalled and reinstalled pc suite, LGUnited mobile drivers......nothing nothing nothing. i have seen others with same issue and they end up recovering....but not me. am i supposed to flash 10B kdz? that's what my settings say i have. LGMSP76910b or something like that. all firmware sites the p769 model is TMOBILE....can i try flashing a tmobile kdz for my phone and it NOT mess up my metro service? i have tried the update tool....nothing.
My wife has been threatening to kill me so please help. i can only say "Woman! get your ass back in the kitchen and make me a sammich!" a few more times before she realizes all she has to do is whop me over the head with a pan....or broom.....or my broken LG Optimus.....help.
OneHitGamer said:
Ok, where to begin. so i rooted my phone fine. i was trying to attempt to apply some hacks to swap external sdcard with internal but everything said i have to change my bootloader. rooted fine with some Chinese program. i tried rom toolkit for the bootloader unlocker. reboots, but nothing. so i found an APK file that you run on the phone itself, that you hit an unlock button and it reboots. it said it supported my model etc. but now when i turn it on it goes past the MetroPCS screen into a white screen with "Encrypting" and a button saying "Reset Phone". then an error pops up that says "com.android.phone has stopped" then it sits there forever.
Well, i did figure out that if you let the battery die down a warning message pops up like normal warning of low battery. it gives options to hit OK or Battery Use. if i hit battery use it takes me into the settings menu. i can change anything from there. i tried a factory reset from there and nothing. i tried hard reset [buttons] and nothing. i tried flashing the 10B_00.kdz using AIO Toolkit and it fails saying my phone isn't connected. so oi go back into settings and enable debug etc etc, reboot and then try....same failure. doesnt recognize. i uninstalled and reinstalled pc suite, LGUnited mobile drivers......nothing nothing nothing. i have seen others with same issue and they end up recovering....but not me. am i supposed to flash 10B kdz? that's what my settings say i have. LGMSP76910b or something like that. all firmware sites the p769 model is TMOBILE....can i try flashing a tmobile kdz for my phone and it NOT mess up my metro service? i have tried the update tool....nothing.
My wife has been threatening to kill me so please help. i can only say "Woman! get your ass back in the kitchen and make me a sammich!" a few more times before she realizes all she has to do is whop me over the head with a pan....or broom.....or my broken LG Optimus.....help.
Click to expand...
Click to collapse
I'm having the same exact problem too. Have you found a solution to this??
OneHitGamer said:
Ok, where to begin. so i rooted my phone fine. i was trying to attempt to apply some hacks to swap external sdcard with internal but everything said i have to change my bootloader. rooted fine with some Chinese program. i tried rom toolkit for the bootloader unlocker. reboots, but nothing. so i found an APK file that you run on the phone itself, that you hit an unlock button and it reboots. it said it supported my model etc. but now when i turn it on it goes past the MetroPCS screen into a white screen with "Encrypting" and a button saying "Reset Phone". then an error pops up that says "com.android.phone has stopped" then it sits there forever.
Well, i did figure out that if you let the battery die down a warning message pops up like normal warning of low battery. it gives options to hit OK or Battery Use. if i hit battery use it takes me into the settings menu. i can change anything from there. i tried a factory reset from there and nothing. i tried hard reset [buttons] and nothing. i tried flashing the 10B_00.kdz using AIO Toolkit and it fails saying my phone isn't connected. so oi go back into settings and enable debug etc etc, reboot and then try....same failure. doesnt recognize. i uninstalled and reinstalled pc suite, LGUnited mobile drivers......nothing nothing nothing. i have seen others with same issue and they end up recovering....but not me. am i supposed to flash 10B kdz? that's what my settings say i have. LGMSP76910b or something like that. all firmware sites the p769 model is TMOBILE....can i try flashing a tmobile kdz for my phone and it NOT mess up my metro service? i have tried the update tool....nothing.
My wife has been threatening to kill me so please help. i can only say "Woman! get your ass back in the kitchen and make me a sammich!" a few more times before she realizes all she has to do is whop me over the head with a pan....or broom.....or my broken LG Optimus.....help.
Click to expand...
Click to collapse
i also got the same problem
Yes i got it. Was so simple. I used the legit, un cracked version of the lg tool. Entered model and it started downloading correct firmware and restored. I randomly found someones post sharing un modded lg tool. Forget the server thing, forget running cracked lg tool. Its what lg or metro does. Nornal tool. If you need the file ill find the link for you.
Help
OneHitGamer said:
Yes i got it. Was so simple. I used the legit, un cracked version of the lg tool. Entered model and it started downloading correct firmware and restored. I randomly found someones post sharing un modded lg tool. Forget the server thing, forget running cracked lg tool. Its what lg or metro does. Nornal tool. If you need the file ill find the link for you.
Click to expand...
Click to collapse
hey man could u post the links for me and everyone for this problem? :laugh:
OneHitGamer said:
Yes i got it. Was so simple. I used the legit, un cracked version of the lg tool. Entered model and it started downloading correct firmware and restored. I randomly found someones post sharing un modded lg tool. Forget the server thing, forget running cracked lg tool. Its what lg or metro does. Nornal tool. If you need the file ill find the link for you.
Click to expand...
Click to collapse
You performed the online restore method.
In order to get the offline flash to work, you need to use the unofficial fastboot and restore an ice cream (p769) x-loader & u-boot. Then perform the offline flash.
There is a problem with jellybeans x & u, and performing the s/w upgrade starting from a cold boot.
The only way for the offline flash flash to work and still be on a jellybean (x-loader & u-boot) the phone must be operating properly and turned on normally (plus it needs to be in the lg software mode).
Finding this information is not easy, because the main sticky threads are out dated.
I've posted this information so many times. I'm like a broken record.
Sent from my LGMS769 using XDA Premium 4 mobile app
still not awserwing the main question.
kuma82 said:
You performed the online restore method.
In order to get the offline flash to work, you need to use the unofficial fastboot and restore an ice cream (p769) x-loader & u-boot. Then perform the offline flash.
There is a problem with jellybeans x & u, and performing the s/w upgrade starting from a cold boot.
The only way for the offline flash flash to work and still be on a jellybean (x-loader & u-boot) the phone must be operating properly and turned on normally (plus it needs to be in the lg software mode).
Finding this information is not easy, because the main sticky threads are out dated.
I've posted this information so many times. I'm like a broken record.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How do u fix this problem we have at hand, give us a method for the restore can we unlock the boot loader when its in this state? I'm in need of a easy method that work I had to use the one-click root for goodness sake plz, help me out.
pimpinparker74 said:
How do u fix this problem we have at hand, give us a method for the restore can we unlock the boot loader when its in this state? I'm in need of a easy method that work I had to use the one-click root for goodness sake plz, help me out.
Click to expand...
Click to collapse
The easy (however takes longer) is the online restore. I posted the lg recovery tool in a thread a long time ago. Do a search for all my attachments. I just got finish working a 16 hour shift so I'm going to sleep. I'll post the link later if know one else does. Sorry goodnight or good morning.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
The easy (however takes longer) is the online restore. I posted the lg recovery tool in a thread a long time ago. Do a search for all my attachments. I just got finish working a 16 hour shift so I'm going to sleep. I'll post the link later if know one else does. Sorry goodnight or good morning.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
could u post the link for me.
kuma82 said:
I'm like a broken record.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
LOL.....hahahahaha!!!!!
Sent from my LG-P769 using XDA Premium 4 mobile app
pimpinparker74 said:
could u post the link for me.
Click to expand...
Click to collapse
Here's the link. http://forum.xda-developers.com/attachment.php?attachmentid=2221245&d=1377786261
Remove any changes to your windows host file (if you don't know what I'm talking about disregard)
Setup the program put your phone in s/w mode (hold vol + then enter the USB cable into your computer). Enter the information and wait a really long time.
Please don't do anything else while performing the restore. Also make sure your computer doesn't go to sleep during the whole process.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
Here's the link. http://forum.xda-developers.com/attachment.php?attachmentid=2221245&d=1377786261
Remove any changes to your windows host file (if you don't know what I'm talking about disregard)
Setup the program put your phone in s/w mode (hold vol + then enter the USB cable into your computer). Enter the information and wait a really long time.
Please don't do anything else while performing the restore. Also make sure your computer doesn't go to sleep during the whole process.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So I'm having the same issues as OP and this is apparently the only thread on the internet where anyone is experiencing this issue. MetroPCS 769 running JB. The phone POSTs and gets to the metroPCS carrier screen but goes to a white screen that just says "encrypting" with a blank progress bar, and that one app crashing. Every other reboot I get the Android recovery screen with the robot and a progress bar, and it reboots back to the "Encryping" screen. I can't even force the phone into a recovery or factory reset mode.
When I run the LG software updater, it says the software on my phone is up to date. There's a menu item for "Download recovery" which detects my phone, and acts like it's downloading something but never finishes. Any idea on how to proceed from here?
kebles said:
So I'm having the same issues as OP and this is apparently the only thread on the internet where anyone is experiencing this issue. MetroPCS 769 running JB. The phone POSTs and gets to the metroPCS carrier screen but goes to a white screen that just says "encrypting" with a blank progress bar, and that one app crashing. Every other reboot I get the Android recovery screen with the robot and a progress bar, and it reboots back to the "Encryping" screen. I can't even force the phone into a recovery or factory reset mode.
When I run the LG software updater, it says the software on my phone is up to date. There's a menu item for "Download recovery" which detects my phone, and acts like it's downloading something but never finishes. Any idea on how to proceed from here?
Click to expand...
Click to collapse
The download recovery takes hours, just let it do it's thing.
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
The download recovery takes hours, just let it do it's thing.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I assumed it would but at this point it's been going for ~14 hours with the "Time Elapsed" stuck at 13 seconds.
Guess I'll just let it sit some more.
kebles said:
I assumed it would but at this point it's been going for ~14 hours with the "Time Elapsed" stuck at 13 seconds.
Guess I'll just let it sit some more.
Click to expand...
Click to collapse
The most I've heard of is 3 hours.
Use the offline flash
http://forum.xda-developers.com/showthread.php?p=48834061
Sent from my LGMS769 using XDA Premium 4 mobile app
im having this exact problem but my phone cant connect to the lg tool be it cracked or legit.
the **** just wont work iv installed drivers and uninstalled and restarted and reinstalled with no luck.
so what can i do make my phone connect to the lg tool?
i have no luck what so ever... all i get is problem with communication between cell phone & pc...
Hey guys.
I own a lenovo A328. For the past couple of months my phone, gets poping up "com.google.etc.etc has stopped".
I tried doing a factory reset, but no luck. Then I learn that I can flash it using SPflash tool with the stock firmware.
And luckily, I did it, my phone back to normal. But then, a few couple of weeks, it started to pop up the same error messages again until I can't do anything on my phone, and unitl it boot loops. So, I reflash again with the same firmware (stock).. and it works again. And same thing keeps repeating and repeating;
until I thought I can try to change the options in sp flash tool..
Instead of "Download only", I choose, "Firmware upgrade".... the flashing finished successfully.
BUT when I press the power button to turn it on, nothing happens, and when I charge it, I cant see the charging screen (or it's not actually charging). I'm sure that it is charging before the flashing, and the power button is working.
When I connect it to the computer, i hear a "connected" sound, then "disconnected", and repeating.
i also tried to reflash it, both the "DL only" and "Firmware upgrade", even the "Format all + ...."
and it flashed successfully (meaning, computer still recognized it), but still not turning on.
Please help me. please.
@jamsubzero check guide here and also please post over there and I am sure he will help you.
[Guide/Info] [How To] Unbrick your Bricked MTK Devices (Dead Brick)
Deena Khanam said:
@jamsubzero check guide here and also please post over there and I am sure he will help you.
[Guide/Info] [How To] Unbrick your Bricked MTK Devices (Dead Brick)
Click to expand...
Click to collapse
The link only shows how to use the sp flash tool... and I have done that many times, still no luck. Thanks btw.
jamsubzero said:
The link only shows how to use the sp flash tool... and I have done that many times, still no luck. Thanks btw.
Click to expand...
Click to collapse
Ask help from OP in that thread, he will guide you completely, Please post your question over there