Hi,
Im trying to unlock the bootloader in my HTC Desire X, I have been following the instructions from the HTC Dev website but get stuck at step 8.
The prompt hangs on "Waiting for device".
I have fastboot setup on the bootloader and have downloaded the sdk and put the files in the appropriate folders.
Could someone help me please.
Thanks
Crypto
CryptoCanedv2 said:
Hi,
Im trying to unlock the bootloader in my HTC Desire X, I have been following the instructions from the HTC Dev website but get stuck at step 8.
The prompt hangs on "Waiting for device".
I have fastboot setup on the bootloader and have downloaded the sdk and put the files in the appropriate folders.
Could someone help me please.
Thanks
Crypto
Click to expand...
Click to collapse
Do you run on windows 8.1, if yes you need another OS. If no install the HTC drivers (again)
GtrCraft said:
Do you run on windows 8.1, if yes you need another OS. If no install the HTC drivers (again)
Click to expand...
Click to collapse
Ok thanks for the info will try this on windows xp in a few minutes and will let you know...
GtrCraft said:
Do you run on windows 8.1, if yes you need another OS. If no install the HTC drivers (again)
Click to expand...
Click to collapse
Yes the Windows version was the problem worked fine on Xp,
Thank you very much
Related
All Further updates will be handled in this other thread
Pre Req:
1) Make sure to install Pantech PC Suite as it will install the correct drivers you WILL need
2) Install ADB and Fastboot
How to gain Root
jcase said:
and here is root, you need fastboot and adb
androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
IOMonster saved the day here, without him you would have to wipe your phone and install modified leaked firmware to get root.
Very glad we decided to not release the initial root, sorry
If IOMonster wants to explain he can, I would prefer not to however.
Details
goo.im/devs/jcase/prestoroot.img
adb reboot bootloader
fastboot boot prestoroot.img
once phone boots, reboot it again, install superuser from the market
Click to expand...
Click to collapse
How to Install Clockwork Recovery
Originally Posted by attn1
tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip
unzip
adb reboot bootloader
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
Click to expand...
Click to collapse
Press Volume Down and Power when booting to get into recovery
I have no come up with any of this information. I just gathered from the previous post to make it easier to search. I will try and keep this updated that way we can have a quick reference post at the beginning of the thread
Saved for future use
***Will have a Links section once this gets established***
Using adb with Ubuntu Linux - forum.xda-developers.com/showpost.php?p=28041279&postcount=641
Step by Step Root Guide - androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
***Special Thank you goes to:***
jcase
Attn1
IOMonster
bulletproof1013
903tex
jackattack79
sandix
mr72
and everyone I didn't get *will update as we go*
from marcusmarcus
marcusmarcus said:
Here is what I did to get root on mine, maybe it will clear up things for others.
*Note, I am on 64bit Windows so folders will be different on 32bit windows.
On phone:
go to settings > Applications > Development > turn on USB Debugging
On Computer:
1-Download and install Pantech PC Suite from c724062.r62.cf2.rackcdn.com/PantechPCSuite_1.0.10.3314.exe
2-Launch Pantech PC Suite and update if it asks. When PC Suite is fully updated, plug phone into computer until device is recognized.
3-Download and install Android SDK from developer.android.com/sdk/index.html
4-Start SDK Manager and check the box next to “Android SDK Platform-tools” and install package.
5-Download prestoroot.img from dl.dropbox.com/u/9772722/XDA%20Forums/prestoroot.img and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools”
6-Download cwm-5.0.2.7-presto.img from tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” as well
7-Now open your command line and navigate it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” folder
Run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up on your phone then wait a few seconds to make sure your phone is recognized by the computer then run the following command
Code:
fastboot boot prestoroot.img
After phone reboots itself, shut the phone down and turn it back on again.
Then run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up again then type the following commands
Code:
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
8-When the phone boots up this time, download the play.google.com/store/apps/details?id=com.noshufou.android.su superuser app[/URL] from Google Play
---------- Post added at 09:10 PM ---------- Previous post was at 09:06 PM ----------
FYI,
I've tried uot.dakra.lt UOT Kitchen couple times so far and have been ale to change the font of the device and the color of the glow for overscrolling but my time and other icons up in the status bar disappeared (the "AT&T" still shows up there though). The Backup and Restore in CWM does work nicely though to get me back to before I installed the zip from UOT Kitchen. I'll try 1 mod at a time using UOT kitchen and see which is making the icons and time disappear from my status bar.
EDIT: I did notice one issue with CWM backups. The backup I did today saved the folder name as "1970-02-22.03.14.56". Some reason the date is wrong in the file naming, should have started with "2012-04-13", right?
Click to expand...
Click to collapse
I hope this helps
For those having trouble with a missing driver I followed the below instructions and installed PDAnet (I did so while in fastboot mode so I could see the drivers install) as soon as it installed and the drivers showed installed. I went back and uninstalled pdanet (leaving the needed drivers behind)
hawkwind212 said:
I solved my problem by referencing to part II of the following page:
theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/Describe
Be sure to download two programs PDANet and USBView (which you may not really need but it's a nice little program).
It's suppose to be "stupid easy" to root PANETCH Burst, but who ever said that left out that it's not so easy if you don't have all the proper driver on your computer. Anyway, so soon after the fastboot mode is brought up, you should notice the computer is telling you a new hardware is found. This is when the burst switches from PANTECH's ADB driver to something else, and only way for the command "fastboot boot prestoroot.img" to work is to find the proper driver for the new hardware call "Android" in the device manager. Now you want to install PDANet, and as soon as the installation process begin, it'll find the driver for the device "Android." and install the driver for you. Once the driver is installed, the installation process will tried to install whole bunch other things into your phone, but I really don't think it can install them in fastboot mode, so you'll probably want to terminate the process. Now type command "fastboot devices" and you should see some kind of output telling you that it's recognize the "Android" device. Now, and only now you can follow the rest of "stupid easy" rooting instruction.
Click to expand...
Click to collapse
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
tremeree said:
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
Click to expand...
Click to collapse
This method doesnt but sim unlock is currently also being worked on.
Is there a Mac version of any of this software?
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Sent from my PantechP9070 using xda premium
bulletproof1013 said:
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Click to expand...
Click to collapse
I think tfranzman is referring to Pantech PC Suite and Android SDK. The Android SDK I believe has a Mac version but I do not think the Pantech PC Suite has a Mac version.
<QUOTE>Download software installed on PC : Click Here
Download MyPhoneExplorer Client App which software installed on Pantech Burst/ Breakout. You must find this from android market or you can read my previous post to get this : Click here
Connect your Pantech Burst/ Breakout device using your USB Cable Data
Please restart your phone and your Computer
After restarting finished, Now launch the installed MyPhoneExplorer Client app on your Pantech Burst/ Breakout and click on OK or Enable and it will connect to the PC Automatically,
Note :
If connection doesnt start or error you can choose another Sync software like Android Sync Manager WiFi.
If you are want Pantech Burst/ Breakout to connect on Mac OS X please follow my previous post : iSync for Mac OS X . I hope you are enjoy with this software.If any problem for downloading ,please contact me anytime</QUOTE>
I don't have a mac so I haven't tested this but this is what I found with google
Any news on CM7/9?? Im already rooted and im just playing around with UOT Kitchen
Let me know, thanks
No news as of yet. there have been people stating they are working on this but we haven't recieved any updates in awhile that I know of atleast. Anyone else reading this please feel free to correct me
All Further updates will be handled in this other thread
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
There is only Windows version of Pantech PC suite. proof
Finn81 said:
There is only Windows version of Pantech PC suite. proof
Click to expand...
Click to collapse
they were asking if any of the software we are using would work on a mac. the answer is yes depending on what software you are refering too. the pantech suite (which has been useless to me with the exception it installed the drivers for me) is windows only. I had actually gotten the drivers originally at work by using pda net. The information I gave above is what I came up with after a quick google search. I'm not sure if that or pdanet for mac would have those drivers.
and again this thread has ended. please follow the links in my Signature (Burst love for discussion or burst essentials for rooting information
I keep tring to root this phone but phone gets stuck in the fastboot mode and does nothing what can i do for this?
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
kagedws6 said:
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
Can you point me to the right place to get the fastboot driver's please
mobgod said:
Can you point me to the right place to get the fastboot driver's please
Click to expand...
Click to collapse
kagedws6 said:
all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
install PDAnet on your computer. it will install the drivers
when i try to boot insecure.img it says cannot load "insecure.img" : no error
placed insecure.img in the root path (where i installed adb C:\Android)
but my device is detected by cmd "fastboot devices"
also installe HTCSync 3.0.0.007
also in Windows device manager i can see "my htc"
whats wrong?
anyone can help me
my device is "unlocked" and s-off
if i remember correctly - all the htc sync stuff should be turned off completely (through the task manager)
look here:
http://forum.xda-developers.com/showthread.php?t=1416896
guru_shastri said:
if i remember correctly - all the htc sync stuff should be turned off completely (through the task manager)
look here:
http://forum.xda-developers.com/showthread.php?t=1416896
Click to expand...
Click to collapse
htc sync is turned off bytheway cant connect tablet via sync(htcsync can not find device is problem?)
but by fastboot devices cmd is listed
and in widows 7 device manager
still didnt load insecure.img
Iv installed new htcsync correctly find my Device then i turned off htcsync pc antyvirus windows firewall
and try to root it reboot in bootloader but it still cant load insecure.img(is in root folder where adb rooted and added in "invironment var." path C:\Android)
I have :
1. adb&fastboot (11MB) extracted from sdk(downloaded work good & root in C:\Android)
2. JETSTREAM-DooMLoRD-insecure-kernel-autoroot-test2-boot.img(renamed insecure.img and copy to C:\Android )
3. DooMLoRD_v2_ROOT-busybox-su
4. htc driver (find in fastbootdevices cmd and htcsync)
5. usb debbug mode
is that enough for rooting?
help please
did u make sure all the adb processes in the background are closed?
guru_shastri said:
did u make sure all the adb processes in the background are closed?
Click to expand...
Click to collapse
thanks for replying
how can i be sure is not running in background by taskmanager?
usually i use adb once and fresh to avoid interfering
i dont think thats problem bytheway i test again
can device b s-0ff without rooting?
in my device is so! (s-off unlocked but not rooted)
another Q can use wifixmanager to fix wifi problem when using another SIMprovider(not AT&T sim)
i'm having hard time figuring out the problem. you can't get root access?
can you post a picture of what happens when you try?(printscreen)
as for the s-off, i'v heard of one other device that was shipped s-off from HTC, but that's it. u might be the second one.
guru_shastri said:
i'm having hard time figuring out the problem. you can't get root access?
can you post a picture of what happens when you try?(printscreen)
as for the s-off, i'v heard of one other device that was shipped s-off from HTC, but that's it. u might be the second one.
Click to expand...
Click to collapse
i didnt buy it directly from origin shop ,seller unlocked it but i dont know he s-off it or not
no need to screen shot its simple what happennig
just :
Run \ cmd \ adb reboot bootloader(device rebooted in white screen above "unlocked" in secound line "s-off")
\ fastboot devices(devices is listed successfully) \ fastboot boot filename.img
and it says
" cannot load "insecure.img" : no error "
when try using titanum or ram manager it say device not rooted and cant access root directory in file explorer
just it, and more try will not successfull
i try a fresh adb (sure no adb running in background) as u said but no ghange
maybe any change by seller caused problem?
Try fastboot boot insecure.img
The filename should be same as what the insecure kernel's name is. So putting filename.img might be the problem. They should correspond.
Sent from my HTC One using xda premium
kailashpchhabria said:
Try fastboot boot insecure.img
The filename should be same as what the insecure kernel's name is. So putting filename.img might be the problem. They should correspond.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I know exactly did that :
as i said in earlier post
JETSTREAM-DooMLoRD-insecure-kernel-autoroot-test2-boot.img(renamed insecure.img and copy to C:\Android )
(drive c is primary drive that Win7 is intstalled in)
but still it say:
" cannot load "insecure.img" : no error "
its seems no one can haelp me:crying:
maybe the file is corrupt?
try this:
https://dl.dropboxusercontent.com/u...MLoRD-insecure-kernel-autoroot-test2-boot.img
also, you need to search other devices forums. this forum is pretty dead, and i'm pretty sure an issue like that occurred elsewhere as well
guru_shastri said:
maybe the file is corrupt?
try this:
https://dl.dropboxusercontent.com/u...MLoRD-insecure-kernel-autoroot-test2-boot.img
also, you need to search other devices forums. this forum is pretty dead, and i'm pretty sure an issue like that occurred elsewhere as well
Click to expand...
Click to collapse
thanks for uploading file
i test new insecure but same problem:
" cannot load "insecure.img" : no error "
Please Help
mamalypro said:
thanks for uploading file
i test new insecure but same problem:
" cannot load "insecure.img" : no error "
Click to expand...
Click to collapse
Please l'm new member here I want to root my jetstream but i didn't find the files any where all links are currupted so could you please please please upload the files for me insecure kernel and root toolkit thank you very much
heres what u want threre is two link in middle of page
http://forum.xda-developers.com/showthread.php?t=1416145&page=6
DooMLoRD_v2_ROOT-busybox-su.zip - [Click for QR Code] : http://forum.xda-developers.com/attachment.php?attachmentid=901243&d=1329199186
JETSTREAM-DooMLoRD-insecure-kernel-autoroot-test2-boot.img : http://forum.xda-developers.com/attachment.php?attachmentid=901244&d=1329199186
downoad and enjoy!
and say what happend
Hi guys,
I known, this tema is often in the discursions. But unfortunately I'm not found answer for my problem. I'm finding it since yesterday lunch...
I have Desire X, I take factory reset and start with root my phone.
1) I have latest drivers for HTC sync and latest google drivers for HTC (I download it via android SDK)
2) I have latest java 32b and 64b and I have android SDK
3) USB debug is on
4) I'm registrated in htcdev.com (I tried manual by them but with result "device not found")
5) I tried root phone via Desire_X_All-In-One_Kit and WinDroid Universal HTC Toolkit
6) I turn off fastboot in settings of my phone
7) I'm trying it on win8 64b
And still I have problem with "no device found"
In cmd if I run adb devices and I got response. If I try adb reboot-bootloader phone is reboot into the bootloader. In device manager before restart phone into the bootloader I see my phone. It's OK but after reboot into the boadloader my phone missing. I don't known if I'm stupid or what but in all tutorials in the internet is that after reboot phone into the bootloader the phone is still visible and I can run fastboot oem get_identifier_token . But for me it is not working. Where I'm doing mistake? Please help me. Thank you.
Edit: I bought my phone by T-mobile. Can be problem there? I mean any strange version of android by T-mobile? Can I reinstal OS for clear Android for htc desire x? thx
dinamit_1 said:
Hi guys,
I known, this tema is often in the discursions. But unfortunately I'm not found answer for my problem. I'm finding it since yesterday lunch...
I have Desire X, I take factory reset and start with root my phone.
1) I have latest drivers for HTC sync and latest google drivers for HTC (I download it via android SDK)
2) I have latest java 32b and 64b and I have android SDK
3) USB debug is on
4) I'm registrated in htcdev.com (I tried manual by them but with result "device not found")
5) I tried root phone via Desire_X_All-In-One_Kit and WinDroid Universal HTC Toolkit
6) I turn off fastboot in settings of my phone
7) I'm trying it on win8 64b
And still I have problem with "no device found"
In cmd if I run adb devices and I got response. If I try adb reboot-bootloader phone is reboot into the bootloader. In device manager before restart phone into the bootloader I see my phone. It's OK but after reboot into the boadloader my phone missing. I don't known if I'm stupid or what but in all tutorials in the internet is that after reboot phone into the bootloader the phone is still visible and I can run fastboot oem get_identifier_token . But for me it is not working. Where I'm doing mistake? Please help me. Thank you.
Edit: I bought my phone by T-mobile. Can be problem there? I mean any strange version of android by T-mobile? Can I reinstal OS for clear Android for htc desire x? thx
Click to expand...
Click to collapse
It's an issue with windows8.1, i also have this issue. hope someone can shed some light on this as all drivers i have tried don't work either
Will_Xda said:
It's an issue with windows8.1, i also have this issue. hope someone can shed some light on this as all drivers i have tried don't work either
Click to expand...
Click to collapse
Thanks for your answer. Hmm, it isn't good . I'll just repair my another computers and create root there.
Q&A for Bootloader unlock
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Bootloader unlock. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
ImportError
After executing ./cublock.py XX SSSSSSSS it gives me this error :
Traceback (most recent call last):
File "C:\Users\angie\Desktop\cublock.py", line 4, in <module>
from cuber import forge
ImportError: No module named cuber
How can I fix this. Also do I need a fastboot cable? Thankyou.
1st Gen Fire HD ?
Hello, will the JMZ bootloader unlock method work for the 1st Gen Fire HD 7? Currently running sw 7.5.1
That's wrong cuber.
I think you need cuber.py from attachment in this topic: http://forum.xda-developers.com/kindle-fire-hdx/development/tools-create-unlock-img-fix-boot-img-t3050689
Do you need a fastboot cable to get into fastboot? I have ran the adb-setup in this thread http://forum.xda-developers.com/showthread.php?t=2588979
I can assure you I have ADB and fastboot drivers installed. When I get to the step to issue the adb reboot-bootloader command it just boots up back into the OS. I'm not sure what I am doing wrong, but I am stuck. Please help?? Also, I really appreciate your work you have done.
Fire HD 6/7 Boot loader unlock working with HDX devices?
Any idea if this will work with the HDX 7 and 8.9 devices?
hlep
i user kinder hd 6 , i unlock bootloader erro
[email protected]:/media/vo/DATA/Android/Rom/Kinder Fire/Fire HD6/cublock$ ./cublock.py 15 af2bb827
Traceback (most recent call last):
File "./cublock.py", line 4, in <module>
from cuber import forge
ImportError: No module named cuber
please hlep me fix erro
To fix ImportError: No module named cuber
Download tools.zip and extract to folder where you put cublock. (See here about tools. Thank you @draxie!)
codomir said:
Do you need a fastboot cable to get into fastboot? I have ran the adb-setup in this thread http://forum.xda-developers.com/showthread.php?t=2588979
I can assure you I have ADB and fastboot drivers installed. When I get to the step to issue the adb reboot-bootloader command it just boots up back into the OS. I'm not sure what I am doing wrong, but I am stuck. Please help?? Also, I really appreciate your work you have done.
Click to expand...
Click to collapse
Can someone please help me? I don't understand why my device won't boot into fastboot I have tried adb reboot-bootloader and adb reboot fastboot and I still can't get in. I am rooted and I have my unlock.img but I can't get into fastboot to flash it. PLEASE someone help me get into fastboot. And please clarify if I need a cable or not, maybe that is the reason I can't get into fastboot?!
codomir said:
Can someone please help me? I don't understand why my device won't boot into fastboot . . .
Click to expand...
Click to collapse
You don't need fastboot cable--they don't work with our device. You might have said No to installing device drivers with the 15-Second installer. Maybe adb is working because its dlls are in the adb dir. I'd try running the installer again, but you may need Fire-compatible driver, idk. That's all I've got. Good luck.
DoLooper said:
You don't need fastboot cable....
Click to expand...
Click to collapse
They do work with our device, I have the soho. You use it to restore the soho with Firerooter. I have ran the installer I don't know how many times and I am pretty sure the drivers are installed. The two drivers I have in device manager are:
Android Device -> Android Composite ADB Interface
Portable Devices -> Fire
Everytime I issue the command it just goes straight back to the OS. I don't understand? Unless it has to be some other USB. I am using my front USB panel and I do have an intel chipset but I am on Windows 7 Home Premium 64 bit. The only other usb device I see is USB Composite Device. But that can't be the driver for fastboot can it?
codomir said:
They do work with our device, I have the soho.
Click to expand...
Click to collapse
Oh, good grief! No, "our" device is 2014 Fire HD, not soho. No wonder the confusion.
Yes, FB cable required for soho. Get one and then go to G+ KFSOWI modding and follow their install guide to update both adb and FB drivers. Guide tells you how to connect cable for fastboot mode. Be aware that the bootloader unlock process here was not written for soho and probably hasn't been tested on it. Please post any further questions at KFSOWI site. thx
.
Hello All,
Need help with TWRP installation, I have tried everything to install TWRP on my one plus x but with no luck
The problem is to unlock OEM, when I am trying to do it it hungs up.
I followed the installation given --> http://forum.xda-developers.com/showthread.php?t=2588979
Upon updating Driver via Device Manager, I don't get the ADB interface but get ONE Plus Interface and it installs MTP drivers and not the "Android ADB Interface", please help!!!:crying: I tried all possible ways but with no luck, any help will be highly appreciated!
Regards,
Vineeth
There's an all in one PC program somewhere in here you should give it a try real easy.
Exodusche said:
There's an all in one PC program somewhere in here you should give it a try real easy.
Click to expand...
Click to collapse
Thanks for the prompt response, please can you guide me or help me with the link?
All the necessary prerequisites to install TWRP is done on my mobile but still don't know why the OEM is not getting unlocked.
Follow this thread http://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830/page1
Hi,
Try this : https://theunlockr.com/2016/02/17/video-how-to-root-the-oneplus-x/
Twrp link : https://dl.twrp.me/onyx/
Mahesh8348 said:
Hi,
Try this : https://theunlockr.com/2016/02/17/video-how-to-root-the-oneplus-x/
Twrp link : https://dl.twrp.me/onyx/
Click to expand...
Click to collapse
Hi Mahesh,
Thanks for your prompt response but again with no luck things failed
See the screenshot:-
http://screencast.com/t/RwG4vXbtgg
Below is the drivers page lead to when I select Browse Driver Manually option:-
http://screencast.com/t/5RouYso1fndO
It gives me below Drivers Rather that ADB
http://screencast.com/t/5RouYso1fndO
And its hangs like this:-
http://screencast.com/t/x9w1asrmusZ0
Any help where I am doing wrong?
vinteeth said:
Hi Mahesh,
Thanks for your prompt response but again with no luck things failed
See the screenshot:-
http://screencast.com/t/RwG4vXbtgg
Below is the drivers page lead to when I select Browse Driver Manually option:-
http://screencast.com/t/5RouYso1fndO
It gives me below Drivers Rather that ADB
http://screencast.com/t/5RouYso1fndO
And its hangs like this:-
http://screencast.com/t/x9w1asrmusZ0
Any help where I am doing wrong?
Click to expand...
Click to collapse
Did you enabled OEM unlock in developer options . if not please enable and do it .
Mahesh8348 said:
Did you enabled OEM unlock in developer options . if not please enable and do it .
Click to expand...
Click to collapse
Thank you for the prompt response, all the prerequisites settings are in place like OEM unlocking and USB debugging are enabled.
Read is somewhere that ROM can be installed by sideload method but does it require ROOT privilege? Or can the ROM be installed from recovery by selecting Install it from SD card?
It's
fastboot oem unlock
Not unblock !!!
Kéno40 said:
It's
fastboot oem unlock
Not unblock !!!
Click to expand...
Click to collapse
Thanks alot Kéno40!!!!!!!!! and of-course sorry for such a stupidity of mine asking for help without checking the commands properly! :crying:
Thanks to all others member for the helping hands... All sorted and now I have successfully installed the CyanogenMod on my One Plus X!! Kindly close this thread...
Once again pardon for my extreme stupidity..
Regards,
Vineeth