Rooting prestigio 5297c - Android Q&A, Help & Troubleshooting

Hi all.
I received my prestigio pmp 5297c with 4.2 preinstalled. I tried to find a way to root it but without any success.
Any idea would be valuable.
Thanks.
Sent from my PMP5297C_QUAD using xda app-developers app

Rooting problem PMP 5297C QUAD SOLVED
Hi,
I found a solution thanks to this web site:
http://androidforum.cz/viewtopic.php?f=815&t=48237
Translate it with google translate to english. I had some problems installing the right driver on my windows 7 x64 machine but I succeeded.
Basically it goes like this:
1. Download the zip from the link on the web page and unpack it.
2. Start the RKAndroidTool.exe (in the status bar it will say "No found RKAndroid rock usb")
3. Shut down your tablet and disconect the usb cable from the tablet that is connected to your pc.
4. Press the volume up button and hold it for 6 - 7 secconds.
5. Still holding the volume up button plug in the usb cable that is connected to You pc. (At this point in my case nothing happened)
6. (If nothing happens) Go to control panel - device manager and there You will see an unknown device.
7. Right click on the unknown device and select update driver. Point to the folder where You unpacked the downloaded zip / Drivers folder and select the search in subfolders checkbox. press OK button. Windows will install the drivers. After that if the tablet didn't start automatically boot it up by pressing the power button.
8. The RKAndroidTool.exe now will recognize the device.
9. Set the checkbox next to rom/recovery.img and press "RUN"
10. The tool will do what it has to do.
From here on just follow the instructions for rooting the tablet from the website.
Hope it will work for You as it worked for me.
Regards

Just use King root from Play Store

Related

Sony xperia sola cant go in fastboot mode

Im trying to unlock Sony xperia sola rite now.... it wont stay on fastboot mode ( volume up + plug usb) when i press volume up, the light strip turns blue for a second or two, but then goes into charging while shutdown mode... I chek *#*#7378423#*#* -- Service info > Configuration > Rooting Status it says - YES// I try USB debugging ON and OFF... I try to stay on fastboot with my home pc windows 7 and my notebook windows vista..Battery 95-100% charged... What i do wrong?
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
xbeda said:
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
Click to expand...
Click to collapse
how can i install drivers without connecting device?
I solved the problem)
1) Open device manager in windows
2) Connect usb cable to your phone pushing vol up button
3) Device manager will show you fastboot device for 2-3 sec (before the phone go to charge mode) Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
I have the same problem but I dont know if cuz my PC is way too slow. I dont even have a chance for it to show up But I know it connected cuz of the alert sound.
---------- Post added at 08:50 AM ---------- Previous post was at 08:27 AM ----------
Haha I solved my problem by installing the driver in safe mode. Things went much quicker here )
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Do you know u are GENIUS !!!
i have been trying to get my phone in fast boot mode for the last 3 weeks then then i changed the "System Varibales" in my Windows & ( 64Bit) and then tried your above method AND ... volaaaa it works ... in a flash it works then the pone is in Fastboot mode .
( Device : Sony Xperia Sola 2012 without upgrade to .654)
Don't call me the genius, I found the solution using google
I just wrote a quick summary of it.
Nerre said:
I just wrote a quick summary of it.
Click to expand...
Click to collapse
...which was enormously helpful. Thanks!! (Can't push the thanks button as I don't have enough posts yet.
BTW, I used the method with the Xperia Go, so obviously the method is not limited to a particular model.
It works
Really helpful!
Hey
I can't even know where will the fastboot device appear to change driver. What can I do? My sola goes in charge mode very quickly I plugged my usb cable in almost 100 times and tried everything.
Okay, I'm totally lost. When I hold volume down button "s1boot download" appers in device manager, but it can't install a proper driver. I know I need s1boot fastboot and hold volume up button but it doesn't appears. Only the portable device with an H:/ partition
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
ricstc said:
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
Click to expand...
Click to collapse
Hey, nothing is working for me. I did the steps above, but with no chance to install any driver. At the driver manager, the s1boot fastboot-thing is showing up for some seconds and then disappear. i can't change the driver or install the new one.
Any suggestions? I want to change to cm9 so much, because the stock rom really sucks...it is slow and buggy
Edit: I found this post http://forum.xda-developers.com/showthread.php?t=1554632 and it works for me!!!
Edit 2: It seems, that you have to do this steps everytime you flash the boot.img to the phone.
I did everything. I installed the driver but when I hold volume up while plug in usb, the led does not turn to BLUE. It turns pink or purple, some kind of colour. What should I do guys? I've gone mad.
Thanks
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
---------- Post added at 06:32 PM ---------- Previous post was at 06:10 PM ----------
srivmanu said:
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
Click to expand...
Click to collapse
Does't work!!
help someone??:crying::crying:
Doesnt work for me either. I tried everything for hours, but i only see a purple LED for a few seconds and then the phone mode changes into charging.
All drivers are installed.
Flashtool doesnt recognize the Sola either.
Is there a way to flash a recovery without having the Sola bootloader unlocked?
Greetings
still no fastboot
device manager opened
phone off, holding vol. up plugging in usb
NOTHING happens on computer no sound, device manager doesn't refreshes, no purple led on the phone, just enters charging quickly
tried another usb port
tried to enter fastboot from flashtool,
tried to enter with command adb reboot bootloader / adb reboot fastboot
NOTHING happens just reboots normally
So I don't have a clue what's going on there, may the fastboot disappeard or broken?
BUT I used the fastboot for a couple weeks ago in this computer in this usb port, since that I tried some rom does it matter?
BL Locked
Win7 x64
pl explain in detail
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
pl explain in detail.im a novice and i want to update to ICS in ma Sola....but fastboot driver installtion failed in my W 7 (64 bit):crying::crying::crying:
Solution
For those who still dont get it to work by "Nerre's" method.
The procedure will be same. You have to download latest android_winusb.inf file. I couldnt get it to work bcz of this. I was using the file from sony site. It was giving me some certificate error. Then I used the lates file downloaded from sdk kit. Then this procedure worked.
Make sure to choose "Android Boot loader Interface" after you select ...winusb.inf file. Then before clicking next, reconnect your device in fastboot mode.
Hope this helps someone.

msm7227 chineese model root

Hi Everyone,
I know there are stupid people out there like myself that bought a crapy chineese tablet with model msm7227 shown that would like to know how to root the phone. Installing the Gingerbreak apk file and running it seems to do the trick.
I tried to take it a step further and upgrade the android version from 2.2.2 to 2.3.3 following instructions from a russian site that I translated.
Russian site link:
ublaze.ru/forum/ftopic1158.html
I translated the instructions in the website below. Refer to pdf attachment for instruction and pics:
Unfortunately I only managed to go as far as Step 3 G. Click Start to update ARM9.
Your tablet will automatically reboot after the upgrade.
For me after I click start the status changes indicating that it is Changing the Phone to Download Mode
It then switches off the unit and loses the com connection to the phone and the status changes to "Attempting to run Flash Programmer"
It fails then with the status "Software Download Aborted" Error "Could Not Communicate with Flash Programmer". I try an restablish the connection during the status "Attempting to run Flash Programmer" but it makes no difference.
So I have pretty much left it there. If any one else is game to give it a go and have better luck good luck. My unit still works after I reset it but its still on Android 2.2.2.
INSTRUCTIONS
Характеристики QUALCOMM MSM7227 FFA 3g
Код: Выделить всё
QUALCOMM MSM7227-1 Tablet PC with Mobile Phone function
Android 2.3 OS
512MB RAM +4GB Flash Memory
7 inch capacitive multi-touch screen
Built in 3G module and WiFi and bluetoothBuilt in GPS navigation
Built in 2.0MP/0.3 CMOS dual cameras
Support phone call and flash10.1 playing
ID устройства:
USB\Vid_05c6&Pid_9018&Rev_0226&MI_00
USB\Vid_05c6&Pid_9018&Rev_0226&MI_01
USB\Vid_05c6&Pid_9018&Rev_0226&MI_02
The firmware consists of 4 steps.
Step 1. Zhelateono have a PC running Windows XP, but I probyval and Windows 7 32-bit also works.
Step 2. Installing the USB driver
рис. 1
If the popup window does not appear automatically, go to the Device Manager> Other Devices
and click the right mouse button on the label Qualcomm HSUSB Device and select> Update Driver
pointing the way to the drivers for each Qualcomm HSUSB Device (see Fig. 2) as follows (see Fig. 1)
рис. 2
Step 3. update ARM9
A. Turn the tablet and connect it to your computer.
B. Go to Device Manager and check that, if the operating system your computer has defined the tablet (see Figure 3.)
рис. 3
C. Installing the program QPST.
рис. 4
D. Click Start, and then click the QPST Configuration. Add all the ports that are able to find (see Fig. 5)
рис. 5
Navigate to the Software Download tab and remove the check mark from C Auto Backup/Restore
рис. 6
рис. 7
Click Start clients and select Software Download, and then click Multi-image.
Click Browse and specify the correct path to the image (image).
Код: Выделить всё
...\Reflash Software\ARM9\image
Click Advanced, select the AMSS Apps Boot Ldr Hearder and AMMS Apps Boot Loader, then click OK
рис. 8
The tab Multi-image, uncheck Auto Backup / Restore
рис. 9
G. Click Start to update ARM9.
Your tablet will automatically reboot after the upgrade.
Step 4. update ARM11
A. Make sure your tablet is connected to your computer via USB-cable.
B. Open ... \ Reflash Software \ Android_Download_tools \ Arm11 V1.7_20110418 \ Android_download.exe
C. Click Connect and verify that the displayed fastboot device
D. Press the volume (Volume) and the power button, and then click the Reset button (Reset)
E. Hold down the volume (Volume) and the (what exactly, the instructions are not written - most likely the trigger) and then, in the program, click Connect again.
And then start flashing.
F. Click Run and wait for as long as see the word Done!!!
рис. 10
G. In this update is completed.
Note. If your tablet does not flash, as I have, in some cases, do the following:
1. Take the sd card and dump the sd card to the root of the archive here: update.zip
2. Insert the sd card into the tablet.
3. Hold the power button and press vol -.
4. Without releasing the two buttons we press on reset clip (located just below the buttons vol -)
Next tablet should enter into recovery mode, that's how it looks:
5. Next, we need to press the Home button (Home)
6. C Use the "vol +" and "Vol -" go to the inscription:
code: Выделить всё
apply sdcard:update.zip
and press the touch button with the four squares (just below the button home)
7. Upgrade process will start. At the end of reset the unit.
Download the firmware for Ipad QUALCOMM MSM7227 FFA 3g
Скачать прошивку для Ipad QUALCOMM MSM7227 FFA 3g
Use this tool to root it : http://www.only4download.com/2012/05/download-superoneclick-android-software.html
Don't forget the THANKS button
You Biscuit!!!!
Thanks guys for helping me to flash my device!!! Running 2.3 with full marketplace. WOO HOO!!!
Ok I had managed to root it before finding your post. ( I think it was UnversalAndroot if memory serves me right - tried so many! )
Used Chrome to translate the original Russian page to English. The USB drivers and the quickboot drivers are all in the file listed on that site. (2.3 software ) I used a Windows XP workstation to connect the device and load the drivers.
To get the device into fastboot:
turn on while holding the Volume UP + button. You should see the android robot.
Connect to PC and install the ADB driver.
Run the Android_download.exe and let it do it's magic. The device will reboot twice and will show a new logo on rebooting. ( at this point I installed the standard USB drivers )
The device will default to Chinese language. Find the settings icon ( blue rings on black ) and look for the icon with an "A" on it.
The network does not work - I assume its because of my region ( South Africa GSM 900 / 1800 / 2100 ) and something is missing in the drivers. It no longer detects a SIM or network.
At least I have a device that resembles a proper Android device now! Time will tell if it's any more stable than the brickware it came with.
Please don't ask me too many technical questions - I'm not a pro by any means!
Thanks
Finally
Finally found the time to get around to trying the flashing to Android 2.3.3 again.
It all worked great this time round. The issue I was having with installing the ARM 9 update was that everytime it changed the unit to download mode and rebooted it, the COM port would change and lose connecitvity after the reboot. But once I used the browse button in the QPST Configuration application and changed the port to match the new port allocated after the reboot it successfuly transfered the software across without the error.
Its so great now that the unit has Android 2.3.3 as now all the following things have been fixed and verified working
1) 3G data works properly now with Telstra
2) Phone and messaging works with Telsta
3) I dont get face book error in the news read section
Theres still a few android apps that are not compatible with the device like, Adobe Flash player but there are suitable alternatives.
But now its a nice workable unit. Very Happy :>
Some error has been solved
saintlypaul said:
Finally found the time to get around to trying the flashing to Android 2.3.3 again.
It all worked great this time round. The issue I was having with installing the ARM 9 update was that everytime it changed the unit to download mode and rebooted it, the COM port would change and lose connecitvity after the reboot. But once I used the browse button in the QPST Configuration application and changed the port to match the new port allocated after the reboot it successfuly transfered the software across without the error.
Its so great now that the unit has Android 2.3.3 as now all the following things have been fixed and verified working
1) 3G data works properly now with Telstra
2) Phone and messaging works with Telsta
3) I dont get face book error in the news read section
Theres still a few android apps that are not compatible with the device like, Adobe Flash player but there are suitable alternatives.
But now its a nice workable unit. Very Happy :>
Click to expand...
Click to collapse
I have solved some error when update rom for it. I attached it from file word
HELP ERROR update ARM9
Hi, I have a problem when star the process appear in red NAK: Invalid Address
I have read the manual 6 times and nothing, please how I can fix this error
Same Error
Hi
I am getting the same error as yours.
Where you able to move ahead an upgrade the tablet to 2.3 ?

help me..my android brick

hi..is there anybody can help me...
i got phone model 'ninetology insight' i9430.
it got brick during flash because usb disconnect..it doesn't shows anything...even charging..no display anything..cant turn it on..
hope somebody can help me with this problem..
can you get into bootloader or recovery, or see it via adb?
pavlpavel said:
can you get into bootloader or recovery, or see it via adb?
Click to expand...
Click to collapse
nope..
cant connect to pc either..when i try plug in using usb, nothing happen..
can help me how to connect to pc? thank you
Tab Bricked....Help
I used Swingtel HelloTab 16GB it bricked stuck on Boot LOGO
its CHIP is E720_SIGN & Processor is Qualcomm Powered Intelligent
pleas help me to install CWM & ROM Mathod
its not going to boot recovery MODE
its only BOOT with Vol+ & Power Button in DOWNLOAD MODE and
BOOT into Vol- & power Button in Fastboot Mode
how to Boot into recovery Mode Please HELP
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
rkillahph said:
I hope this helps, it happends to me when the 1st-5th time i install the Img file using LiveSuite
try to install USBDeview here the link ->tomsguidedotcom/us/download/USBDeview,0313-13254dothtml
(just retype the dot = "." , can post link here coz im new.
1. open Device Manager and USBDeview
2. click on "Created Date" on upper right of the program
3. uninstall all USB driver the date after the port hud driver (VID_1f3a_PID_efe8) on USBDeview. wait for the Device manager to install the important driver u accidentally uninstall.
4. hold power botton for at least 30 sec
5. run livesuit.exe, select your img file. connect the usb to the PC or laptop
6. while hold volume up insert the usb cable in the andriod device you have.
7. while holding the volume key, press power botton at least 2 sec, 4-5 times.
8.if unknow device show just install manually the usb driver in the livesuit folder using Device Manager (Update DriverSoftware->Browse my 9. Computer for Driver Software-> Let me Pick from the list of device -> Have Disk -> Browse (Go to the LiveSuit Folder click the *.inf driver in usb driver folder) just click ok
9. w8 for the LiveSuit to react. if nothing happend, reapeat Step 4.
10 click on "Created Date" on upper right of USBdeview, check if port hud driver (VID_1f3a_PID_efe8) turn "GREEN" mean conneted . this you click "Yes" on the LiveSuit option given.
Hope This one Help. Good luk!
Click to expand...
Click to collapse
i already try your method..but seems nothing happen...still my android cant connect to pc..
i just only need to connect to pc only..only that way i can solve my problem..thanks anyway..
sigh..
i think because i flash a wrong recovery then my phone brick...
xhitgirlx said:
i think because i flash a wrong recovery then my phone brick...
Click to expand...
Click to collapse
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
rkillahph said:
*is there any indication in ur device manager that u are connected wen u plug in the device?
*what usb cable are u using? try using another usb cable with complete pins.
Click to expand...
Click to collapse
i try already another usb cable..nothing happen also..i dont know why..
it's like when you plug in your device to the pc nothing happen...
it means no device connected at the pc.
i think no body can help me in this situation..even the developers...thank you.:good:

[Q] Help :Please: with Prestigio - PMP7280C3G V4.2.2 - ? -

Hello I got this tablet Prestigio - PMP7280C3G V4.2.2 back in November, December time and I am wanting to Root it.
From a post I did back then on another website a user replied that he got it working and rooted using a method on a website into which here's the Instructions translated into English below....
-
Testing the current model PMP7280C3G_DUO with FW 1.0.05 and 1.0.07
Installing CWM :
First Tablet Do NOT let it lie somewhere near you will need it .
Second Download and unzip the file . PMP7280C3G_QUAD-recovery-flash.zip | Ulo?.to password : 7280
3rd Open Device Manager on the computer to turn off the tablet and connect the cable to the PC for a while, the new device
( MT65xx preloader ) right click update driver (if 2x click left to open the info on the device and select Update Driver )
and manually install the driver " MediaTek preloader USB VCOM Port " from the Drivers folder depending on your version of
Windows (tested on XP and Win7 32bit and 64bit ) - If does not happen the first time you just disconnect and reconnect
tablet , again captured the moment on the device.
4th Unplug the tablet and start Flash_tool.exe
5th Right click on a scatter - loading and set the path to the directory / PMP7280C3G Recovery
CWM/MT6589_Android_scatter_emmc.txt and let Open.
6th Up in a menu icon you click on a download in the following confirm with YES you want to continue .
7th Connect the tablet off - starts by itself recovery download to your tablet . Can now be two situations ; endings Will
a download window with a green circle . A second variant or passes first the download and install the computer starts by
itself another driver " MediaTek DA USB VCOM Port" and flash program throws an error . Not to worry if you just unplug the
tablet itself on off it and click again to download again, click YES to connect off tablet . Ted would arrive melo
successful recovery in tablet and confirmation will be green ring in a new window.
8.Odpojte cable from the tablet and hold the VOL + and Power 3 seconds and you are in CWM recovery .
ROOT :
First In the ROOT folder is a file Supers - v1.65.zip and upload the memory card or tablet.
Second Run the recovery and select "install zip from sdcard" then select a location where you want the file to install
depends by location " choose zip from sdcard " and " choose zip from internal sdcard " you will find include file and
press power.
3rd select reboot system
That's all .
Way back in the state with Origami recovery without root if required :
Approach, as well as with CWM just place ingredients into CWM Recovery Route to Recovery folder Origo . The rest is the
same. In the tablet to run the application supers and remove root data settings .
THNX :
XDA for Supers - v1.65.zip
-
-
-
Now from the above I have downloaded the files Turned off the Tablet gone into device manager and plugged in the cable from the Tablet to the USB-Port of my laptop. It says in the steps above in step 3 that a new device ( MT65xx preloader ) should show up but it doesn't not in device manager not even on my computer now is that because the tablet is turned off also when its off and plugged in it's just charging.
Also when I got this Tablet I already hooked it up to my laptop to put music onto the tablet and photos so does that mean I need to turn the tablet on and uninstall anything that is to do with the Tablet in device manager then go from step 3 again - Does anyone know if that sounds about right since the new device ( MT65xx preloader ) in device manager doesn't show up yet with it's turned off and plugged in.
Any help will be Massively Appreciated.

[Q] Lenovo P 780 Chinese made phone

Hi,
I have received a Lenovo P 780 from Amazon after a long wait which was I guess a Chinese made phone. When I go to Google play I get only Chinese apps & also all system software from Lenovo are in Chinese language I cannot use whats app since it does not recognize my number and also it does detect my current city to show weather update.. I dont want to return this phone as it takes many days to return and get a new phone some one please assist me thanks in advance
Syed Moin said:
Hi,
I have received a Lenovo P 780 from Amazon after a long wait which was I guess a Chinese made phone. When I go to Google play I get only Chinese apps & also all system software from Lenovo are in Chinese language I cannot use whats app since it does not recognize my number and also it does detect my current city to show weather update.. I dont want to return this phone as it takes many days to return and get a new phone some one please assist me thanks in advance
Click to expand...
Click to collapse
Flash a ROW(rest of the world) ROM forom this forum. Your phone will be more understandable.
Sent from my Lenovo P780
stympy said:
Flash a ROW(rest of the world) ROM forom this forum. Your phone will be more understandable.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Perfect can you please give me the steps that I should follow flash the phone with ROW apologies I'm new to these things..
Syed Moin said:
Perfect can you please give me the steps that I should follow flash the phone with ROW apologies I'm new to these things..
Click to expand...
Click to collapse
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure) (skip steps 1.2.3 iff you have allready installed drivers)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
17. disconect your phone and power on your phone
18. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
19 Good luck.
stympy said:
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure) (skip steps 1.2.3 iff you have allready installed drivers)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
17. disconect your phone and power on your phone
18. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
19 Good luck.
Click to expand...
Click to collapse
Hi,
Thank you so much for your help I tried doing that and step 15 does not complete. The phone is not getting detected I believe I installing MTK drivers but no luck when phone is connected to system in Device manager it show other devices and MTK driver with an ! mark but with in few seconds it goes off. I tried with many times but enabling all USB options from my phone. I will really appreciate your assistance thanks in advance.
Syed Moin said:
Hi,
Thank you so much for your help I tried doing that and step 15 does not complete. The phone is not getting detected I believe I installing MTK drivers but no luck when phone is connected to system in Device manager it show other devices and MTK driver with an ! mark but with in few seconds it goes off. I tried with many times but enabling all USB options from my phone. I will really appreciate your assistance thanks in advance.
Click to expand...
Click to collapse
I did it thanks to full updating the steps in details:victory:
Syed Moin said:
I did it thanks to full updating the steps in details:victory:
Click to expand...
Click to collapse
Sooo... it is working then..
Glad to help. :laugh:

Categories

Resources