I have an old multipad PMP3384B with seriously old and slow Android 2.3. I tried to update it following the process below and using a rooted image.
What you need:
-get Rockchip Batch Tool from HERE (contains USB drivers)
-get a firmware:
a) PMP3384BRU_20111206_V1.1.9_root -prerooted image, no other changes
b) PMP3384BRU_20111206_V1.1.9_root_607Mb_free - 607 MB for /data, prerooted, Golauncher, Gokeyboard, Adobe Reader, CoolReader, Dolphin browser HD, ButtonSaviour- only for RockChip Batch Tool flashing
How to flash:
1. fully charge your MultiPad
2. backup internal flash- it will be erased
3. unpack Rockchip Batch Tool and launch it as admin
4. press and hold Reset (on the back), plug USB cable, release Reset
5. there should be a popup asking for drivers- they are placed in Rockchip_Batch_Tool_v1.4\drivers\[windows version]. If there is no popup go to Device Manager and install drivers
6. load firmware .img file to Rockchip Batch Tool and click Update button
After I completed this process rockchip batch confirmed that the update was successful with no errors but I can no longer power up the tablet. I have tried the reset button but no joy. I also tried following the process again as the tablet is still being detected by Rockchip batch tool when plugged into my pc via usb. I'm downloading the original firmware from the prestigio site now so once that is done I will try restoring it.
Any other ideas would be much appreciated
EDIT : Problem resolved, reinstall of firmware from prestigio site worked.
find my post on this topic http://forum.xda-developers.com/showthread.php?t=1403956 hope it will help you !
Related
hi, need help rooting Alcatel t10 tab. i already tried both superoneclick and unlockroot but to no avail.
thanks
http://forum.xda-developers.com/showthread.php?t=1886460
Work for my Alcatel OT T10
:good:
unfortunately, it didn't. how did you do it?
after so many attempts, it finally did it. i have to unroot to root again. tnx
Root for Alcatel OT T10
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
are you experiencing problems with time? such as time not updating when the screen is off?
kosio2002 said:
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
Click to expand...
Click to collapse
Hi,
I have a problem with point 4 "install the drivers, ADB"
I followed this guide
http://forums.acsyndicate.net/showt...LINUX-MAC-WINDOWS-Knives-amp-Forks-v-12-02-04
but does not work
the command "adb devices" respond with "device not found"
How do you install adb driver?
Thank you
How to install Android ADB/USB Drivers
http://www.youtube.com/watch?v=6IEdJZGQVI4
---------- Post added at 11:49 PM ---------- Previous post was at 11:44 PM ----------
maglev0730 said:
are you experiencing problems with time? such as time not updating when the screen is off?
Click to expand...
Click to collapse
For me there was no problem with the clock.
If you use an application, such as HD widgets, there is a setting in the options to save the battery, then when the tablet sleep, time does not change. Check it.
:good: Thank you so much. Works!!:laugh:
the link for the adb driver seems to be down. (
maglev0730 said:
the link for the adb driver seems to be down. (
Click to expand...
Click to collapse
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
kosio2002 said:
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
Click to expand...
Click to collapse
thanks a lot! youve been a great help
---------- Post added at 05:49 AM ---------- Previous post was at 05:18 AM ----------
will this work for 32 bit windows?
driver problem
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
help
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
DMLRNDLL said:
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
Click to expand...
Click to collapse
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
giotzkie05 said:
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
Click to expand...
Click to collapse
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
kosio2002 said:
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
Click to expand...
Click to collapse
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
DMLRNDLL said:
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
Click to expand...
Click to collapse
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
kosio2002 said:
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
Click to expand...
Click to collapse
yes, i unzip the file file first then rename it with update.zip then turn off my tab via pinhole then turn it on. no dialog showede up..
thank you! it works perfect
Recently i've been seeing ALOT of queries about how to root the Softwiner EVB Android Tablet
I have one myself and found a way and have tried and successfully completed the process myself.
This is an easy 6 step process. Basically this is what you do.
1. Back your tablet up, probably to your PC, laptop or whatever.
2. Factory reset it so everything is wiped, it should restart
3. It should be rooted after its restart!
4. Restore everything so you can get your apps back
5. Download a root check app from Google Play (it should confirm your device's root) or use SuperOneClick as a fake attempt to re-root your tablet, when it is about to start rooting your tablet a message should pop up saying that your device is already rooted
6. That's it! Have fun and buy a root beer or something
If this helped please click the "Thanks" button, i'll do the same if you just ask me, it's only one click and would mean a lot to me
if you need me for more Softwiner EVB information or information about any android devices (and blackberry devices but i don't know what will bring you here but just in case): follow me on Twitter and DM me @LordwinOfficial
Rooting nuclear softwinerevb
Not working for me. There is no superuser soft or icon after factory reset.
My Tablet is
Manufacturer: unknown
Model: SoftwinerEvb
Android Version: 4.1.1
Build ID: nuclear_evb-eng 4.1.1 JRO03C 20130504 test-keys
Board ID: nuclear
Chipset Platform: exDroid
I tried to root it using SRS Root software. It says that my tablet is root and have superuser icon.
But that superuser irself didn't have a root access.
Is there any ideas how to completely root it.
Thank you
mrlee2k said:
Not working for me. There is no superuser soft or icon after factory reset.
My Tablet is
Manufacturer: unknown
Model: SoftwinerEvb
Android Version: 4.1.1
Build ID: nuclear_evb-eng 4.1.1 JRO03C 20130504 test-keys
Board ID: nuclear
Chipset Platform: exDroid
I tried to root it using SRS Root software. It says that my tablet is root and have superuser icon.
But that superuser irself didn't have a root access.
Is there any ideas how to completely root it.
Thank you
Click to expand...
Click to collapse
Same here
Problem Solve
My problem solved.
I found out that SRSRoot software really did root my tablet. the problem is the Superuser.
So when I update superuser (apk and binary) from 3.0.3.2 to 3.1.1 manually using adb push, the Superuser
thing works fine.
I'm a ahppy man now....
Good luck tou you all
Cheers
[ROOT][GUIDE] How to root non-prerooted SoftwinerEvb Tablet
This is a Root Tool for Android 4.0/4.1 devices.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.
ADB Driver universal
Do I need to worry about "unknown publisher"? Thank you.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.[/QUOTE]
No you don't.
Sent from my SAMSUNG-SGH-I317 using xda premium
Custom Recovery
Is there a custom recovery for the softwinerevb yet? I have one that came with 4.1 this tablet needs a downgrade bad. Very slow. Not happy wit it at all so far. I have root using Bin4ry method. It worked very well. The bad thing is that the creator has posted the file on a site that never lets you download it. You can find it other places tho.
Kingroot worked as well
Sent from my Nexus 5X using XDA-Developers mobile app
[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue on this forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
KieranFoot said:
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer!
My device can´t still enable to enter in meta mode. I tried MT6573, MT6577, MT6589 VCom driver, the SP Flash tool doesn´t locate the DA path for the function download scatter loading file.....
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421&nocache=1, for windows Vista. It seems the controller is installed, but the SP flash tool or MTK tool doesn´t recognize my iconia A1-810.... I loaded the *.txt file: MT6577_Android_scatter_emmc.txt and marked all options ans appears a error: FLASHTOOL ERROR: S_FTHND_FILE-IS-NOT-LOADED-YET (5007)
I disconected the battery and when i connect usb to pc the driver apppear for 1 second with the Mediatek Preloader vcom controller and enter in loop again... appear and disappear on the PC Device Manager.....
I´m completely lost.. can you suggest something?
Thanks
flashtool error image attached
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Hello,
after a few days I successfully unrooted & unbricked my LG-D605. I read a lot of articles and asked lot of questions and tried a lot of unsuccessfull ways. Here is my successfull solution.
My PC configuration
HP 650 (2,4 GHZ, 4 GB RAM, 500 GB drive)
OS openSUSE 13.2 64bit - software.opensuse.org
Oracle Virtualbox from oracle official repository - www.virtualbox.org
Downloaded Windows 7 home premium EN 32bit (very important - it was unsuccessfull with xp / 8.1 and czech localization xp / 7 / 8.1) - Windows 7 32-bit Home Premium x86 English on techverse.net
LG-D605 preparation - HARD RESET (form off-state Vol- & Power, when prompted Power, when prompted Power), next off
Needed downloads - tested
LG mobile drivers - attachment
LG Flash tool - attachment
ROM in .bin and LGUP_L9II.dll (extracted from kdz file) - file in google drive
Install process
Unpack and install LG mobile drivers
Unpack and install LG Flash Tool without run it
Overwrite file c:\\lg\lgfllashtool\megalock.dll with file megalock.dll in archive lg-flash-tool.zip
Connect phone in download mode (remove battery - connect phone to usb -> hold Vol+ -> insert battery)
After phone detection and installation in PC run Windows Device Manager and set LG device to port COM41
Run LG Flash Tool
Mark checkbox "Manual" and set in Model Config path to LGUP_L9II.dll and *.tot file (archive extracted kdz)
Click on OK
In PortSetting window leave marked only port 1
Click on Right Arrow
If you see in small window Port 1 "Ready", disconnect phone on 5sec and reconnect (if you on virtualbox, remember on reactivation usb port)
Done
hi, other flash metod is turn phone in download mode, and flash the kdz file with KDZ_FW_UPD.exe.
also downgrade or upgrade firmware very easy, open the software, select tipe 3gqtc, mode diag, open te kdz file, conect the phone in download mode and launch software update.
Note: in windows device manager disable lg modem device.
no problem in win xp.
sorry for my english.
I tried this metod but it gets stuck at 54%, jumps to 100 and it gives me a download failed error. What could it be?
Thanks man! It worked for me.
I had a slightly different configuration though...
Host OS: Fedora 21 64bit
Oracle VirtualBox 5.0
Guest OS: Windows 7 Professional EN 64bit with corresponding VirtualBox Additions installed
Installation of LG drivers and Flash Tool went well. But after connecting phone in Download Mode it took long time time install drivers which ultimately ended with fail - "drivers were not successfully installed" in yellow bubble. But the phone was shown in device manager so I continued.
Another thing is that I do not have enabled reactivation on usb port so I quickly pluged it in manually after phone rebooted. It worked too.
Only bad thing is that now I have Android 4.1 and have to upgrade back to 4.4. But this is much better situation than bricked phone so thanks again.
When I click right arrow, nothing is happening
For all of you out there having Iconia B1-710 in boot loop or hard bricked, this is the way to fix it.
I'm not responsible to any damage you got when following the instructions.
!!!YOUR WARRANTY WILL VOID!!!
This will fix SPFT errors 2004, 6010, 1010.
At this moment I'm not able to upload files so contact me over email: [email protected]
First of all, read this entire post and make sure that you have MediaTek DA USB VCOM drivers installed.
If not do this:
1. Extract all files from the archive and run every program as administrator.
2. Disconnect the tablet from the PC, remove the back cover and pull off the battery connector.
3. Open device manager and expand Ports (COM&LPT) selection
4. Connect the tablet to the PC and right click on any new shown device. If it's reconnecting don't worry, you just need to be fast and right click it and select Update Driver Software.
5. Click on Browse my computer for driver software and click Let me pick from a list of device drivers on my computer.
6. Uncheck Show compatible hardware and from the shown list find and select only MediaTek DA USB VCOM. If MediaTek DA USB VCOM is not shown you didn't installed the drivers correctly.
DISCONNECT THE TABLET FROM THE PC AND DO NOT PUT BACK THE BATTERY CONNECTOR
1. Now open SPFT and select the scatter file.
2. Click on window and then Write memory
3. In memory settings select EMMC.
4. Click Open Raw Data and select secuoff.img
5. In Begin address write 0x1F88000 and in Container Length write 0x427100
6. Click Write memory and connect the tablet. Green circle should appear.
7. Now go back to download selection and make sure that everything is selected (including preloader and dsp_bl).
8. Press download. If everything was good you should see a green circle.
9. Remove the USB cable and put the battery connector back and back cover to place.
DO NOT TURN IT ON. CONNECT IT TO CHARGER AND LEAVE IT ABOUT 15 MINUTES TO CHARGE.
how to fix tab
i have acer b1-710 tablet that keeps restaring can i use this guide to fix it ?
Hi Daniel !! First of all, THANK YOU !!
I've used this guide to revive my HARD BRICKED tablet Acer Iconia B1-A71 and it worked like a charm !!!
I followed step by step your guide using B1-A71 original stock firmware's files.
So I came back to your post just to say THANK YOU VERY MUCH SIR !!!
I know this is an old thread, but you saved my life and it's never late to say thank you
Greetings,
Seba
hey....the firmware i downloaded does not contain scuofff.img file...can u give a link of a firmware that has one ??
I have Iconia B1-711 in boot loop (I think hard bricked) .
I think i have the corect drivers and the "SP_Flash_Tool_v5.1628"
Dose anyone have the scatter , the secuoff.img and the other files ?
Can Anybody give the required files please
secuoff file
Hi, I trying to follow your instructions but where can I find that secuoff.img file.
hello, could someone pass me the necessary files for the B1-710, thanks